OK, I *absolutely* want to try solving that last one. Seriously, you should call it the "mushroom cube" and pitch it to some companies for mass production.
Very interesting! With the last one, I figured maybe you could/would take the centers of the cuboid (or perhaps the entire layer) and put them on the cylinder, making a sort of capsule shape. Getting it to look clean might require reshaping the pieces though, so I can understand not doing that.
These look so cool, they should be actual products! My favorite is the 3x3/mastermorphix swap. I think that would look cool with a sticker mod applied after the swap is done.
- 0:48 You can get this effect by mixin the pieces from different sizes 3x3x3s like a 56mm one with a 45mm one. 🤔 - 1:56 These almost look like a Fangshi Shuang Ren. 😀 I've been wanting an f/s Ren for a long time. I might have DIY one. - 2:18 Yup, that's the trick, many puzzles are just shape-mods of second- and third-order cubes, or a pyraminx or a megaminx, so if you can just figure out how to look at it, suddenly it becomes easy to solve. 😉👍 Sometimes rotating it isn't enough and you have to actually move some pieces to turn it into a 2×/3×/etc. like with a ghost or cutter cubes. Of course, even if you find the regular puzzle inside the shape-mod, doesn't mean it'll suddenly be trivial, there are some puzzles that aren't even shape-mods at all, but regular ones with different stickers that make it hard, like picture cubes or mirror cubes. But that's the fun of it. - 4:21 I wonder what other names the Cutter Cubes go by, because I can't find them on some sites by that label. 🤔 - I wish somebody could figure out what happened to Nathan Wilson. The last time he posted, he was lamenting being burned out and stressing himself over his 30-in-30 series. We kept telling him not to stress and take as much time as he needs, then he disappeared, and _deleted his whole channel._ 😕
It's funny bc I watched this while eating a - bear with me here - blueberry-banana nut muffin with the nuts sieved out with chopped dark Hershey's kisses with malt cocoa powder, made in the microwave and without milk. Bit of a mix 😂
When I saw your how to solve a rubik's cube for beginners. It only worked when 4 of my corners wasnt right. When it was 2 or 1. It was all scrambled up expect the yellow side.
When i did the 3x3 and 4x4 swap on my cubes it just extended the corner peices instead of making them look smaller. They are smaller but now i have a 3x3 covered in alien antenna
OK, I *absolutely* want to try solving that last one.
Seriously, you should call it the "mushroom cube" and pitch it to some companies for mass production.
No !
I would say a muffin cube
i like to call it a tophat cube
@@AnakarGD wa dat
@@khalebwilliams5029 You don’t know what a top hat is?
@@sketchesforyou8020 sry I tot it was som ting else
The amount of quality in this video!
Your my favorite RUclipsr
Ayo 7391!
Im subbed
yoo
@@avidgrobmain hi
Very interesting! With the last one, I figured maybe you could/would take the centers of the cuboid (or perhaps the entire layer) and put them on the cylinder, making a sort of capsule shape. Getting it to look clean might require reshaping the pieces though, so I can understand not doing that.
The 3x3 and mastermorphix mod is crazy
Indeed, bro!
I wonder... does it still morph?
@@AngieTheCatGD yes it does, only the edges do
These look so cool, they should be actual products! My favorite is the 3x3/mastermorphix swap. I think that would look cool with a sticker mod applied after the swap is done.
I was gonna say that you don't cut corners, but then I saw the barrel cube.
You should swap the edges of the cutter cube and the fisher cube to get a star shaped 3x3x3
I watched this 4 times already, it still dosent get boring
All piece swaped cubes name
0:15 yinshao rubik 3×3 mini corner
2:38 Rubik's 3×3×mastermorphix & mastermorph3×3
5:04 octagonal fisher cutter cutter cube & fisher cutter octagonal cutter cube & cutter fisher cutter octagonal barrel
6:34 Siamese cubes/conjoined cubes & diamond 4×4 & checker checker checker checker checker checker checkers checker checker checkerboard 4×4
9:27 5×5 barrel 5×5 cube
10:33 barrelboid
I liked the part where he thought it would be really cool and wanted to try it out
5x5 Pillar Cube
My favorite is definitely the barrel in a cube
- 0:48 You can get this effect by mixin the pieces from different sizes 3x3x3s like a 56mm one with a 45mm one. 🤔
- 1:56 These almost look like a Fangshi Shuang Ren. 😀 I've been wanting an f/s Ren for a long time. I might have DIY one.
- 2:18 Yup, that's the trick, many puzzles are just shape-mods of second- and third-order cubes, or a pyraminx or a megaminx, so if you can just figure out how to look at it, suddenly it becomes easy to solve. 😉👍 Sometimes rotating it isn't enough and you have to actually move some pieces to turn it into a 2×/3×/etc. like with a ghost or cutter cubes. Of course, even if you find the regular puzzle inside the shape-mod, doesn't mean it'll suddenly be trivial, there are some puzzles that aren't even shape-mods at all, but regular ones with different stickers that make it hard, like picture cubes or mirror cubes. But that's the fun of it.
- 4:21 I wonder what other names the Cutter Cubes go by, because I can't find them on some sites by that label. 🤔
- I wish somebody could figure out what happened to Nathan Wilson. The last time he posted, he was lamenting being burned out and stressing himself over his 30-in-30 series. We kept telling him not to stress and take as much time as he needs, then he disappeared, and _deleted his whole channel._ 😕
I think u should do something about a normal 3x3x3 cube and a normal 3x3x3 pyraminx
careful, you're gonna give calvin puzzles some ideas 😂
That Small Corner one Looked very Cool!!
1. Rubix Swap 3.4
2. Rubix Swap: Edge
3. Tryaswap
4. Barrelcut
5. Checkmate
6. 5Barrel
7. FlatB
You should make a 3x3 where the Centers can move, or use the pieces of a magnetic cube to make a void cube (and yes, it would turn terribly)
0:42 Rubik's ball
1:33 Black speed cube and Rubik's speedcube
very interesting. i liked the 3x3 and mastermorphinx mod
new name for the 3x3/4x4 corner swap:
INTRODUCING THE NEW "Rubik's 3x3D"
nothing like a z3cubing video after a long week
Mix the corners of the paper 3×3 with the corners of the Lego 3×3
I laughed so hard from the sight of the title n the thumbnail. Didn't even view the video yet I knew the video is going to be hilarious.😂
The 5x5 barrel and cube looks like a barrel in a box and it looks so cool
A while ago I made 6 different variations of a layer swap with a ShengShou wind and a ShengShou Mirror cube. So that's an idea of one to try.
1:30 Hey z3cubing I did the 2nd one but it looked kind of funny 😂
Do the piraminx and the megaminx. I think that would look really cool!
You should really sell some of your shape mods or general mods to a speed cube shop!
He uses the cubicle, not scs
@Ken lizarda oh sorry I didn’t see the “a”
The 5x5 Barrel + 5x5 could be called the “Barrel Jail”
or Jarrel
wow, so much effort
wow
Void Cube with the golf ball painted to be 6 different colors so you can move the ball in the center
🤯 The amount of awesomeness is off the hook.
Mind bending 🤯
We need more of this
9:26 That’s what I call a sandwich cube
*with extra filling
I like the 3x3 with the 4x4 corners
perhaps try to fit as many pieces onto the other object's core as possible
U make awsome vids your my favorite so far
3x4 Corner
Fisher Barrel
Siamicker
5x5 Cubrel
2x4x4 Barrel
3xMorphix
Oh no, stop giving ideas, I hope Calvin doesn't watch this video!
I would love to see a cube in a barrel in a cube in a barrel on the 5x5
you are the frankenstein of cubes
you should put mirror cube pieces on a normal 3x3
4 gigaminx corner/edge peices in one megaminx corner should be cool
Maybe make the middle layer of an cutter cube and the top and bottem of an fisher cutter cube
The 2nd cube in 4:02 looks like a pyramorphix with a cube that has no edge and center
These puzzles look crazy 🔥
3:18 is a dictionary definition of a tumor
I tried mixing a gan11 with a Rubik’s brand.
It didn’t go well
I don't see how it could work, i mean with the rubik's trash, or the gan 11 awesome
Apparently the mechanisms fit together
Wow so Amazing
I didn’t understand the morphix cube until you put the 3x3 corners in it
Love the first one
Well i really like 5x5 barrel in a cube
you are an artist
Dude, review the Rubik's build it solve it, it's fun to build
Rubik's cube 2*2 gan is so cool
Love your content z3cubing
Cool
Rex cube and FTO! (make it a short pls)
SICK
Core-swap mods! Core-swap mods!
When will you make a 100% Lego 2x2 or all paper 2x2
2x2 is like 100 times harder
So good
Z3 cubing, can u take the video about sengso 3x3, 4x4 and 5x5 Rubik's clock?
Is there actually a mod you can make to cubes that makes you able to swap pieces between the cubes?
It's funny bc I watched this while eating a - bear with me here - blueberry-banana nut muffin with the nuts sieved out with chopped dark Hershey's kisses with malt cocoa powder, made in the microwave and without milk.
Bit of a mix 😂
You can turn the fisherman cube without the middle layer on 45 degrees
Fisher*
Love the video keep up the good work
who else thinks they should make mastermorphix a WCA event?
11:11 Mushroom cube
Noooooooiiiiiiiicccccccceeeeeeeee
i love yours videos
This is what hknow store seems to keep doing with their "new" cubes.
Fun fact: The Rubiks cube wasn’t made in China, it was actually made in Hungary
You probably had the weirdest cube collection
Is anyone else solving Rubik’s cubes while watching the video
L pfp
I did this with my 2x2 and 3x3 and it looked so funny
10:37 Mushroom Moment
I love these diffrent puzzles when are they for sale?😄
imagine a stickered 3x3 with stickerless 4x4 corners lol
Can you do more videos like this?
swap the corners of a 4 by 4 for 2 by 2 corners
solve all of them!
SUPER WOW
When I saw your how to solve a rubik's cube for beginners. It only worked when 4 of my corners wasnt right. When it was 2 or 1. It was all scrambled up expect the yellow side.
Is this a paper Rubik's cube because it looks better than the one that you said we can make at home
the first one looks bulged like the big cubes
Y perm..... TPERM
I'm a fan
you should check out a new rubiks puzzle that rubik's released its called the rubiks slide
do more piece swap mod's
The last one is a Rubik’s Beyblade
Yo, just got my first 5x5 today.
Hello, LegoBoyZ3 :)
What about a 3 cube peice swap?
great dear
When i did the 3x3 and 4x4 swap on my cubes it just extended the corner peices instead of making them look smaller. They are smaller but now i have a 3x3 covered in alien antenna
last one is tophat cube
If one stays consistent with the first 2 mods, are they wca legal?
No, because the pieces don't all have the same finish, color, texture, etc. I'm sure that breaks at least a few regulations.
@@Z3Cubing But it is consistant around the cube.
@@Z3Cubing Same thing with your gan 11 12. If it were not for the scratch, it would be legal.
The last 1 looks like a mushroom🍄🍄