Making the *Ultimate* LEGO Rubik's Cube!
HTML-код
- Опубликовано: 28 июн 2024
- I build a 9x9 LEGO Cube, which is one of the most insane (and time-consuming) cube modifications I have ever made!
Fully-Functional 100% LEGO 3x3: • These Rubik's Cubes ar...
My 4x4 LEGO Cube: • Making a LEGO *4x4* Ru...
My 1x1 & 2x2 LEGO Cubes: • *Finishing* My LEGO Cu...
OGRE Cubes' 11x11 LEGO Cube: • World's Biggest Lego R...
Use discount code "z3cubing" for 5% off everything at TheCubicle.com! www.thecubicle.com/?p=HJMGVPebP (Affiliate Link/Code)
Intro Music: "Forces" by Jim Yosef [NCS Release]
• Jim Yosef - Forces (fe...
Video Music:
"Waves" by Beau Walker [FTUM Release]
• Beau Walker - Waves [F...
"Music To Wear Fingerless Gloves To" by Punch Deck
• Punch Deck - Music To ...
Outro Music: "Ruby" by Jim Yosef and Alex Skrindo [NCS Release]
• Jim Yosef & Alex Skrin...
Merch: teespring.com/stores/Z3Cubing
0:00 - Intro
1:17 - The Limits of LEGO Cubes
1:57 - A Perfect 9x9
3:32 - The Process
5:19 - TIME LAPSE
6:49 - The Results
9:54 - The Turning
10:46 - Conclusion
#RubiksCube #cubing #Z3Cubing 
Развлечения
I couldn't help but notice that this video already has more views than OGRE Cubes' original video about his 11x11 LEGO Cube. So if you enjoyed this video, go check it out! ruclips.net/video/RK66TzY67Rk/видео.html
ok!
Hi Z3cubing, I just got my first 9 x 9 and I don’t know how to solve it. Could you make a video on how to solve it so that me and everyone else who has a 9 x 9 can solve it?
omg! it looks huge!
@@reedythepeedy8547 If you know how to solve a big cube (preferably 6x6+, but if you know how to solve a 5x5 there's only one more concept needed), it's the exact same method. If you don't know how to solve a big cube, there are lots of tutorials out there. Most of them are specifically for one size, but if you know how to solve one, you can pretty much solve them all.
there was already a rounded 1x2.....
Eyy it's clearly the weekend to make lego cubing videos 😍 But also, gorgeous cube!
If you both see this coment now I love your content😁
yessir
Yes Omg
IKR the Lego cubes look sick
Ok
That looks so dope, well done as usual!
Waffle
Second
Yes it is
You got me into cubing
I use you’re notation
I'm surprised of how well this cube turns. Never thought a 9x9 is possible let alone one that turns greatly.
19 by 19’s exist.
Well it’s just legos glued to the cube so it’s not surprising it turns fine. Now a 100% Lego 9x9 would be absolutely insane
he means with lego@@romancourville989
also 21 x21 exists too@@romancourville989
@yeet5109... It is 9x9...
I'm surprised the 1x1 turns so well. The more you know!
Lol, it doesn't! (I get the joke)
@@that1bushy r/woo (only woo not woosh)
@@iwouldnot4256 wooooooooooooooo
aaaaaaaaaaaaaaaaah
@@that1bushy r/woo *bang* (it doesn't go past your brain)
5:37 I was about to ask why you didn't stack the LEGO® plates for the sanding process, but it seems like you figured it out along the way.
®
@@yellowmarkers ®
@@h-Films ®
@Craft Crew Tv ®
HOW DO YOU GET THE R? Well I have my own trick… It’s 70° in here and how about this one? § or these ones? „«_»„ or this? … not … but … or these? ¡ ¿ and I still have more! These ones? ^_^ ^ ^ ^ - ^ ＾＾
Or maybe these ones catch your eyes? 【】「」『」“” i think you will like these ones! ＠（）：／-. Okay I’m finished…
For now
The effort z3 puts into every one of his videos is absolutely incredible. Every video he makes is some of the best on cubing youtube
Cubetube
YouCube
Cubecube
orange juice
@@peanut4016 lol
You could have used 1x1 round studs instead of normal 1x1 plates. You wouldn’t have to sand them then but I think there would be a little bit of white around the edge. You could have also used tiles instead of plates to make flat and smooth. But still, this is really cool.
He should be in Puzzle Advent Calendar haha
You put so much more effort into your videos than other cubing channels. Spending more than 10 hours on a silly Lego 9x9 cube? That's insane dedication. Subscribed.
The amount of work you put into these videos is insane, you deserve 1 mil man
I love your content bro! You deserve 1mil subs!
Imagine stepping on it 😳
4:28 BRO- that yellow lego that you trow really remained standing
This is genuinely incredible! I've been making some very basic rubiks cube mods and it makes appreciate the effort it takes to make what you do. I am beyond impressed!
Finally, now we can bandage a 9x9 lego cube into a 3x3
This guy won't stop with legos lol... Great video
Now you can put 3x3 lego plates on top of it and use it as a 3x3 :)
May have been said before, but I'm thinking it wouldn't be that hard to 3D print a 5x5, or even a 6x6 or 7x7, with cubies perfectly sized for gluing lego pieces onto. 6x6 (maaaaybe 5x5) would probably be the best point to transition from using 2x2 pieces to 1x1 pieces, while the 7x7 would be the first in the sequence to have 1x1 centers, 1x2 edges, and 2x2 corners.
And as long as you're 3D printing these base puzzles, may as well modify the pieces so that the legos snap right on to them... sounds like it would be a fun project. I'd be interested in helping out with that!
I’d have to wonder if consumer fdm printers have enough resolution for that to work. SLS definitely but it’s hard to have prints that don’t have very slight layer lines that are going to catch. ASA or ABS might hold up but they also might have longevity issues in something like this too. The modeling work wouldn’t be too bad but I see some definite potential roadblocks too. Designing it kinda like stickered cubes could save the sanding though.
@@johnandrews9433 With a bit of patience, far more ambitious mechanical puzzles have already been manufactured on desktop printers. I admit that some of my own designs have run into the troubles you describe, but check out what more patient puzzle builders like Corenpuzzle and Kevin Uhrik have done!
Finally! Everything I didn't know I needed!
Bro you really have the highest patience!! (in all that removing pieces, sanding, sticking it again etc.) you are so damn extraordinary and coooooooooooooooooooooool!!!!
Factory: Spends a hour or two building a functional 9x9.
Z3Cubing: Spends 10 hours gluing legos on the pieces.
that timelapse music is a banger
The 1X1 is the easiest to make entirely out of LEGOs. All you need are six 2x2 tiles or plates (1 white, 1 yellow, 1 green, 1 blue, 1 red, 1 orange) and one LEGO 2x2 die piece, which comes with most LEGO board games, such as Minotaurus.
Good job sticking through that it probably was hard sanding everything!!
Very nice looking cube
Wow! That cube looks amazing!! Great Job dude!
Awesome dedication
Your dedication is on another level. Insane
Wow, nice job!!
Awesome!!!
Wow that is some amazing creativity!
Non cubers: Is it a LEGO 486x486?
That’s sick
Awsome!
I love it 🤩
That’s amazing
This is why I’ve subscribed to him because he is one of the few people that would take time out of their day just to make this and still make it look and turn so well and he is just an amazing RUclipsr overall
Very impressive!
Your insane and I love it!!
4:06 Looks like you did the math!
Number of stickers on 9x9 = 9x9x6 = 486
Number of stickers on 3x3 = 3x3x6 = 54
486/54 = 9
That is massive
thats really cool
Awesome 👍
The 1×1 turns great lol
Wow! Respect
It's so perfect
Beautiful ❤
Cool!
The easiest part is actually opening the bags of Lego
Nice video. keep up the good work!
Nice video!
Nice job
This is a ridiculous amount of effort. But it looks amazing
Wow Zalex I Never thought a 9x9 Lego cube was possible
Wow that's huge 🤯
Dude your actually really smart for sanding the same pieces together rather than one at a time good job thinking outside the cube :)
THIS IS COOL
Throwback from the OG, legoboyz3!!!! Hahahaha
So Interesting!😍😍
AWESOME
Favorite intro on RUclips.
Damn, I need to come back to the puzzle making scene.
this guys puts a bunch of effort into ALL of his vids
I appreciate it
bro ur dedication to doing this is legit earned my respect for u man
It would be so fun to see Z3 doing a fun solve challenge by bandaging the cube by placing random 3×2 lego plates!
dang so many videos keep it up
5:46 that's some nice looking pixie dust you got there. Can I try some?
Good job with this!! I imagine it took FOREVER!!:)
I love your vids keep the exsalent work going for life
If you step on it it'll probably explode and then there'll be cube pieces with lego pieces on them all over the floor. Lovely.
Great lego cube mod!!! I really like your videos especially the ones with mods and this one was my most favorite so far
Super vid
pre made 1x1 1x2 and 2x2 round plates already exist, but they probably would have been too rounded to look good.
Well done of your hard work!
Multicraft!
Greetings excellent work ..!!
Would the yj zhilong mini 5x5 fit the 1x1 plates? Or 1mm smaller, the older shengshou 5x5 mini?
I would love to see a conversion of something like the 6x6 MGC to a 4x5x6 cuboid. 3D printed extensions is the obvious solution and I can probably do that in onshape but not sure why I see cutting or grinding pieces away in some posts/resources. I always figured that the extensions should do the job w/o removing material from the original cube. Anyway just something that interests me since the 2x3x4 & 3x4x5 are beginning to bore me, the price of a 4x5x6 is around $300 and I'm pretty crafty with my 3D printing and modeling... just too chicken to destroy my nice MGC and never really did a rube project of any kind. Love your videos @Z3Cubing, keep up the great work!
Cool
My favorite cubing channel by far! Thanks for the content and keep up the great work 👍✌
Cool. But the coolest part is It's a 9x9 cube of 11x11 Lego plates.
Super flip on that would have been cool lol 😂
nice 👍
Tingman big fan didn’t think you would watch this 😊
Wooooooooooooooow😱
I love how the glue Keeps moving lol
I wonder if you could've attached all the tiles to the bottom of a large lego plate, so they're guaranteed to be aligned, and then glued them on all at once
I'm not sure how to align that with the cube itself during gluing though
You deserve so many more subscribers
That would take me like 20 sittings so solve but this man did it in 1!
Someone get this man a belt sander.
I wonder if the company that made the Lego Rubik's cube will do that
I love Lego and cube🥰
10 years later: welcome back to Z3 cubing! we will make a lego Gigaminx!
OMG these videos are great😅❤
l I love
For a 5x5 maybe try a 2x1 and 1x1Lego plate Peices maybe it will work
I still need to solve my 1x1. I’ll get to it eventually
This is so cool and I actually appreciate how much time and effort you put into your videos.
For people who just take off stickers, these cubes are for you
@Z3Cubing you should do a team up with @J Perm like: "how many 3x3s can I solve while J Perm solves a 10x10" or something
Now if you place 4x4 plates on the corners, 3x4 plates on the edges, and 1 final 3x3 plate directly in the center, you can make WORLDS LARGEST LEGO 3X3...out of a bandaged 9x9