How to Re-Lay an Old tile roof ,Tile reset , roofing tips 101
HTML-код
- Опубликовано: 6 янв 2025
- Here is a tile reset video ...many tips to count on and hope I didn't do that bad on this video.
thanks for watching and thanks for making Eric Garcia ...the Best Faken roofer in the world !!
thanks everyone and all my friends that follow me everywhere I go.
god bless you all .
with all the respect.
Eric Garcia
Thank u Eric for your videos I got this new job an all I've done is tpo single ply so watching your videos differently helped out bro thank u
You are very good at this bro. Im have this guy come to replace a crack rafter on the valley of my front door. I will ask him to put on the roof cement under the flashing to prevent leaking against the wall
Thank you for doing the valleys right. Almost every tile roof I get on has the valley tiled wrong!
Watching your videos are very informing and entertaining. It makes me want to become a roofer.
Man ...thats a compliment! Thank you...it looks simple but requires a little bit of skill...not much but nothing out of this world...you should try it!
Good work like how you work only thing I would’ve done different is leave a 4-5” gap those tiles are way to close to the wall along the cricket/dead valley
El CHAPIN ES Chingon!!!!!! Ya yeva moncho tempo con tigo!!!! Like your videos!!!! Buen jale compa!!!!
Thank you for watching everyone !! Thanks for making my channel part of your favorite videos on the web! I really appreciate your support ...with all my respect to all the roofers, Homeowners and viewers in general .
Eric Garcia.
Puedes aser un video de como marcar las linias para poner teja,can u make a video of how to do the measurements to start laying tile down
@@Adgarc claro ke si...que clase de teja? Plana...S tile...S low profile? Claylite...claymax?
Roofing Solutions by Eric Garcia gracias por compartir ....cuanto peso soportan esas tejas
Great job! Good luck!
Hey Eric, I enjoy your videos very much. I have a quick question. I am doing a Tile Reset on a section of my house. The roof is 4 1/2 to 12 pitch. The tiles are S-shaped concrete tiles. I am going to use Titanium UDL-50 double layer and Titanium PSU-30 in the valley....I am in Hemet, CA. Not as humid as Huntington Beach, but a little hotter and dry. The question is: Is UDL-50 a and PSU-30 a good choice?....Thank you for your answer and time.
Eric I’m at the start of doing this . Do u put mastic over the drip edge to seal the first half roll of #30 to the edge metal ???
Can you use “shake” underlayment that is 18” wide and also 30# for the first half roll of underlayment??? It’s already cut to size .
Great videos! Question: why not just remove and replace the vertical sidewall flashing (tile pan) at 7:20? It makes it way easier to run the felt up the roof as far possible.
Exactly 😂 I guess he likes to use that messy henry shit
It would be easier maybe he's not replacing that metal so maybe he doesn't want to damage it by removing it so he's working around it that's my only guess you could use the sticky ice guard underneath than lay the metal on top that would stop all leaks and way easier
I’m about to re-lay on my house . 38 year old paper . Thanks for the tile videos keep them coming .
What’s the guideline for roofing nail pattern in general? I’ve read through the TRI guide and it doesn’t say specifically.
You don't have to nail every tile unless you live in hurricane area and B/C requires it. A 2.5'' roofing nail would be fine. Do the first three rows and then every other/third row. Check with your building inspector before taking my advice. I live in DFW and tile roofs up here are mostly just hung on battens, but in Houston they're all fastened with ring shanks or hung with wire in the vulnerable areas where you have a lot of water. Feel free to nail them all in just know that the more nails you put in the roof the more of a PITA the repair will be when you get broken tiles.
I really wanted to see how you got started on the install. I would of liked if there was more of installing in the video.
Nice work brother
Hola Eric tengo una pregunta. Como ases chalk line el roof pa ke te salga derechon ese tipo de tile? Porke ya ise unos 3 jales Pero estaban dificil de ke salga derecho. Si me puedes enseñar oh si ya tienes un video Donde explicate
Eric, thank you for the education, have a question, on a 2 -1/2" pitch roof should I use peel and stick underlayment? I have 3 in polyiso underneath sheating on an open ceiling. Im worried about roof being able to breathe
In California the codes says...the minimum requirement for shingles is 3/12...tile 3/12 with double felt...i think it should be done with a build up system like: hot mop. Cold App. Torch down or single ply
You can install tiles or shingles but using a peel and stick underlayment and 1 layer of 30 lbs felt on top to be able to ventilate the peel and stick ...never install shingles or tile directly over peel and stick ...unless suggested by the manufacturer
Titanium PSU 30 vs certainteed wintergaurd or any other suggestions on good peel and stick
Could you please refer me to roofers to reset replace paper in Southern California orange, riverside counties to work on my roof
great video
Erick what area are you I need a roof job in the area of riverside county ??
How much u charge per square ft senior
Eric I was Watching you 2 year video about removing old cement tile and put new roof paper and put the tile back , how I make contact with you because I want the same job on my house
Shouldn't you be using a Peel and Stick product like Grace Ice and Water shield as a base layer under the head wall flashing to seal it off and prevent leaking in those areas?
Open valley without mortar and no ridge in the middle?
11:57 finally you're using 5 crown valley metal 😂😂😂 I told you years ago , see you're learning buddy 👍
Are you God?
About how much was for that roof ??
Hey Eric, where are you based? Are you in Orange County, CA?
Como te puedo contactarpara un estimado?
You need a gopro (great video
Erick, thank you so much for your videos man!!! They are so informative and helpful. Is there a way to contact you? I have a few questions for you. Thanks and look forward to talking to you!
Jerry
Please teach us how to install bird stop ( metal and clay) and how to measure your tile lines to the ridge. Thanks
I will. I'm doing another tile reset in so cal right now
I'm not a teacher but i can share the way i do it...everyone does it different ...same as other application ...every roofer has it's own ideas...greetings!
I will make a video how i do it!
@@Garciasroofing
Excellent. Thank you so much
I would also like to see a video on how you lay out tile. I have the PDF from the tile institute but i learn better from a video.
What is your roofing nail spacing when u are double layering the 30#?? Thanks ...
Why I break tiles while walking on them?
Probably because they are light weight tiles ...these tiles were standard weight tile and they are rock solid ...very walkable. Also try to walk over the end lap of tiles when walking on tiles
..never over the hollow center of the tile...thanks for watching!
Hi Eric. Thanks for posting all these videos. I'm about to install concrete tiles on my garage and wanted to ask you a few questions. 1. Is Warrior Roofing a good brand for the #30 underlayment?2. Do the battens have to the treated or can I just use regular douglas fir 1x2 strips?I live in Hesperia. Just incase you need to know. Thanks again.
No
Is that a no to both questions?
Sorry ...i didnt reply the "no"
1: use 2 layers of 30 lbs felt under the tiles.
2: DO NOT. Use batten...2x2 wood strips unless the roof is more than 5/12 slope. If you use them...cut them in 4 ft long and leave a 2 inch space in between the battens...use electro galvanized nails to hold the wood strips .
DO NOT USE SYNTHETIC UNDERLAYMENT...is garbage
*definitely
👍🏼
FELT - LOL - LOL -LOL - LOL
Wtf german roof style is mutch nicer