(The reply above me is an emoji, nothing else) [in the voice of David Attenborough] Here we see a wild 9-year-old attempting to communicate on the internet. However, the use of only emojis makes it impossible to understand. Is it a mating call? A call to the rest of its pack? We may never know.
My great, great grandfather was a master machinist and wrote a treatise 150 years ago on what he called "offset cam turning." While I also pursued a career in machining, I never got any sense of what his treatise was about until I saw this video. Thanks for posting.
This video is the perfect example of why I love machining videos, I just wish every machining channel on youtube took the time and effort to achieve the level of cinematography that you've accomplished here. Well done
There are 2 types of machinist content on youtube-ones that make theatrical entertaining videos and the ones that make boring videos full of knowledge. Plenty of people that watch all kinds of diy videos but they will never do any of them on their own.They watch it out of boredom.And then there are minorty of people that watch specific video on subject to help them in their work.For example how to make pipe reduction or bend a pipe correctly. Mechamozg and joe polishlastnameicantwrite make knowledge videos ,clickspring makes typical entertaining moneyshot videos.
If ever RUclips machining video had this level of cinematography, there wouldn't be so much information and knowledge on RUclips from Master machinist. These types of machining videos obviously take weeks of filming and editing to get put out. The people that just want to see milling machines cut metal, and lathes turn off chips, are just hipsters that want to watch "oddly satisfying machining videos." Most machining content is for Machinists who are trying to learn. It's not for hipsters to watch so they can feel like they're connected to the trades, act like they know about actual work, and act like they know about machining because they watched a few RUclips videos. This style of videos are strictly for entertainment, not education.
you are amazing plz guide me i am also making videos on different things making in Pakistan please visit my channel and check my work @@mymechanicsinsights
Absolutely gorgeous work. I work in the aerospace industry at the Kennedy Space Center. I had to show some of the machinists this video and they were all in love with the design as well as your execution of a goal and how it turned out. Bravo. 👏
@@brainfarth Stennis Space Center is relatively close to me, they had an opening for someone to work a printing press, best I could discern from the posting. They wanted someone experienced with government presses and was also a journeyman welder that was a master at Tig. Those were the 2 biggest hurdles, because I'd think veteran welders would be welding, not working printing presses, and vice versa but idk. At any rate, I had ~7yrs experience as a machinist in the field, could always pull more than my own weight in the shop, programmed multiple machines and ran them on my own shift for a while even but that wasn't nearly enough to get Stennis' attention. Iirc the pay was like 34/hr, if not higher, and I was making under 20/hr so I had to at least try lol
3 jaw versus 4 jaw.....please tell me that the "aerospace industry at the Kennedy Space Center" has a lathe with a 4 jaw chuck and doesn't turn everything in a 3 jaw....Bravo if they invested in a 4 jaw!
I'm only 2:20 seconds in and my brain already hurts trying to understand all the math involved in defining that shape. Just brilliant work and a proper pedestal for the 8 ball!
Your brain hurts, you realize he did this after buying stock in pain meds company, knowing he will make brain hurt & then pain med company stock goes up :)...
@@BabaG stonks. That's even more of a big brain move. Trying to understand that level of foresight makes my brain hurt even more, further increasing stock prices and the cycle continues!
@@bobtheblob2770 YES! And a small, offset, segmented cylinder inside a larger cylinder. It's a sublime optical illusion when it's rotating around it's Z axis.
As engineering students, we learnt the beauty of lathe machining - it is a great art - and society is indebted to men behind these machines who made our lives easier.
You ought to look into 5 Dimensional CNC lathes timelapse videos, if you want your mind blown at least. But for just doing this by eye and by hand, this is awesome too in its own way!
That was mesmerizing. I'm glad you chose it for the 8 Ball. It needed a worthy stand and you created one. When you showed those marks before, you said they would make sense and, wow, did they ever. Thanks, MM. That was fabulous.
I used a Lathe for the first time today. Fun experience but I realised just how long and stressful of a process it is. I also burnt myself so many times because of the "metal shavings". You have all my respect for this video.
Thanks for a great learning experience with no obnoxious music, long boring and unnecessary details. The video showed all that is need to do this project. Excellent! I never thought of setting the 3 jaw like that.
2:27 Kind of cool to stare at that one disc that’s basically stationary in the middle when rotating. But I would really love to see the math behind this. This could make for a very cool candle-holder
It's just geometrical. Keep watching the video, think about everything, and you'll figure it out. Otherwise, show this to any trig math teacher who can explain sine waves. Or study sine waves yourself.
I am a medical doctor and watch CNC videos sometimes for a change as it fascinates me. This was one of the most interesting video I have ever seen. Short, Smart, and Sweet.
I'd humbly state that there's nothing wrong with a 3 jaw chuck, imo. They hold on to pretty much anything (small, large, wide and the long materials), if set up correctly... as far as i've seen. Not that i've seen or used anything But the 3 jaw chuck, but that's...beside the point, right? 😇😅
I have a friend who's been doing machining for some 45+ years. He has his own shop and all. You're the second person I've seen making this kind of part. I saw him making an almost similar part for a cargo ship. The captain of the ship thought it had to be done by molding but my friend told him he can cut the piece from a chunk of metal. After seeing the part the guy's jaw was dropped. This was around 30 years ago. Great work. Thoroughly enjoyed watching it.
I was wracking my brain thinking how on earth you'd do that on a lathe... And once I saw it, it was so obvious I thought how did I not think of this?! Really cool...
This is funny and entertaining to watch. Now I'm retired, but I worked 43 years in a metal workshop milling, turning, boring, welding and so on. First 10 years with manual machines and then with CNC and CAD/CAM. I think metal working (same as woodwork) is a bit underrated profession in these days. I was always excited of my work.
*holds on to her face in awe as she realizes that her workplace will never be doing or having her do stuff like that* This is incredibly, ridiculously, amazingly cool! Thank You for sharing this with us!
This has already been watched over 10000 times, although it has not yet been here for an hour! Thank you for great content My Mechanics. 👍 Since I started to follow these videos I have bought a lathe of my own.
I was most impressed with this offset metal turning video. I decided to use the technique using 42 mm diam. Aluminium. I modified the ends (since I'm not a billiard player or golfer) putting a fancy knob on top and knurling the base. The result was vey pleasing and makes a nice ornament/ talking point in my home.
Ive been a Machinest for 20 yrs approximately, Went from All manuel to Pure Automated. Well watched my Company Literally Replace every Manuel Machine in the last 5 years. Now we have All new Mazaks, Nigatas, Shibauras, Toshibas Tue’s, Megaturns. We kept like 1 Bridgeport, And A couple bridgeport heads for custom Work. But this has to be the most fascinating thing ive ever seen. Ive seen some badass stuff made By old Machinests. This is dope
I'm definitely going to try something similar on my homemade wood lathe. It's definitely not powerful enough for metal but this gave me an idea nothing obviously as fine or small as this but something creative
When you hear people say, "Wow, who thinks of these things??", the answer is people like MyMechanics. I love it when math is used to make something beautiful like this. The beauty of science. This pedestal and 8-ball would be great to put where you meet with potential clients so when they ask how good your work is, you just say "I made those."
@@Dead_Goat What's your problem? I am seriously not in the mood for stupid replies like this. I see the beauty of the math that explains shapes and patterns like this. No math? Did he just flip on the lathe and it was magically on exactly the right settings? F off.
*I've been a Journeyman Machinist most of my adult life. (I'm almost 62)..I didn't even know you could do this on a lathe.. I wish I had the words to express how cool this is...I'm just not that smart...Incredible is the best I can come up with*
I could see a really cool desk lamp being made using this method on a larger stock piece, maybe cutting a pocket out on the end pieces for electronics, etc. This is awesome!
WOW. I have to admit that I don't know that many professionals of lathering but you are a true master. Not only because obviously you know how to handle a lathe, but also for the incredible designs you imagine and THEN do with your lathe. I'm wordless, really.
@@sleepCircle Thanks for the correction, English is not my mother tongue. Still, can't see a huge difference between "wordless" and "without words", I've seen both in writing, but obviously I was missing out something from the context because on my mind both are equivalent. Could you please elaborate? I know this is not the best place but still 😇
@@DervishD I believe it is not that "wordless" is incorrect, per se. But this is a common turn of phrase, "I am without words" is what one would expect to hear in such a usage.
@@hankkingsley9183 Oh, that I can understand, thanks a lot for the explanation 😊 Curiously enough, "I am without words" is more or less literally what we say in Spanish, but to me it sounded worse than "wordless". Always learning, I suppose! Thanks again!
It's so mesmerizing and yet simple - after you've shown the method - it just makes me smile. In the same way as when you see a magician pull a really cool trick. Thanks man. That really entertained and impressed me. 😎
When I see things like this I am reminded of the videos of the FORD auto factory(and others) where they show all of the automated machining and assembly processes from the days of the 1932 FORD/etc. My thought always is....WHO THOUGHT OF THAT? These days of CNC are amazing, however I marvel more at the old days of manual machines and the way they were applied. CNC is amazing and modern factories are by no means easy to design but the old videos amaze me to no end.....remember - 100 years ago!!!
You never cease to amaze me with your brilliant setups! An incredibly easy way to turn offsets...with a bit counting jaw turns and of math of course!! 🤯😎 Thanks MM, beautiful piece fitting for any 8 ball!
Wow. This takes experience, knowing what your machine is capable of, plus a ton of practical knowledge (ie the whole setting up with height gauges and making marks to know to turn the part 20 degrees each time) to achieve. I’m fresh out of trade school and Ive realized there is so much that you don’t learn in trade school. I’m at a small job shop trying to learn every little bit I can and like uploading time lapses of what I’m working on, but this is next level
Absolutely! It's incredible to see the level of skill and precision involved in this work. I completely relate to your experience - trade school provides a great foundation, but there's so much more to learn on the job. Keep pushing yourself and sharing your progress; it's inspiring to see others grow in their craft
I do love your lathe work, always coming up with some really great designs. Just thinking out loud but two of these could be made into a single double helix… that’d be seriously cool!
Could you make two identical copies then slice off opposite halves of the disks at each end to make them both semicircular and out of phase with each other. Then interlace the two parts and bond it together at both ends. The single helix is pretty spectacular.
A fascinating way to show the relationship between rotational motion on a circle and the sinusoidal functions. By offsetting each cut, you've essentially just taken a "value" of sine/cosine at that degree mark. It gives you a discrete sine function shape across the piece, that when viewed from the top or bottom, has also encoded the angle that the cut was performed at. Terrific machinist skills showing an elegant mathematical relationship!
That was so cool and I am thankful for the work you put into it. I was wondering where the 8 ball was, then, there it is!. I don't have a stand, I make a new one. Very original. Thank you.
I am fascinated by 15th century ivory turnings and I have never been able to understand how they made staggered turnings like this. Now I know. Amazing.
Making two of these that interlock together to make a double helix would be really interesting to see and probably an equally exciting mathematical engineering challenge.
I didn't even know you could do that with a lathe. That's so cool. It looks like some kind of science trophy lol. Watching it spin in the lathe jaws was almost hypnotic. Very unusual. I love it.
Since I've watched everything you had posted on this channel and the second one :D I really have to ask.. there is something you can't do !? :D You are one of a kind sir ...
Rotating off centre like that, it must be a beastly strong lathe to not just fly apart. I guess that's why you kept the rpm down. Does the hammering of the tool create a series of facets, or are they gradually smoothed to near circular by running for a while?
If the hunk of metal were to be a bullet, I’d say it looks like a 30mm shell, which is commonly used in CIWS and CRAM. If you decide to look up a photo of one of them firing, just know only a third of those bullets it fires have tracers.
I never knew that the Jaws could be rearranged like that on a lathe.... Thank you for showing me this it was an educational experience thank you so much
I’m 63 and an old school fitter/turner by trade and I’ve NEVER seen this done! In fact I’ve never even THOUGHT of doing it. Simply incredible!!
He is next to God
@@macdeep8523 Gotta be honest, I thought he was gonna be!
Yes and it's so incredibly simple considering there's no need to follow someone else's drawing.
You are from Ukraine.What is your name?
@@ebramnady2250 I am not in Ukraine. I am in UK and I am flying that beautiful nation’s flag in support.
That has got to be one of the coolest “because I can” pieces ever made!
Hello
😚
🤨
(The reply above me is an emoji, nothing else)
[in the voice of David Attenborough]
Here we see a wild 9-year-old attempting to communicate on the internet. However, the use of only emojis makes it impossible to understand. Is it a mating call? A call to the rest of its pack? We may never know.
THATS what this is!
My great, great grandfather was a master machinist and wrote a treatise 150 years ago on what he called "offset cam turning." While I also pursued a career in machining, I never got any sense of what his treatise was about until I saw this video. Thanks for posting.
This video is the perfect example of why I love machining videos, I just wish every machining channel on youtube took the time and effort to achieve the level of cinematography that you've accomplished here. Well done
Agreed.
Nice to hear that, thank you very much :-)
There are 2 types of machinist content on youtube-ones that make theatrical entertaining videos and the ones that make boring videos full of knowledge.
Plenty of people that watch all kinds of diy videos but they will never do any of them on their own.They watch it out of boredom.And then there are minorty of people that watch specific video on subject to help them in their work.For example how to make pipe reduction or bend a pipe correctly.
Mechamozg and joe polishlastnameicantwrite make knowledge videos ,clickspring makes typical entertaining moneyshot videos.
Couldn't agree more.
If ever RUclips machining video had this level of cinematography, there wouldn't be so much information and knowledge on RUclips from Master machinist. These types of machining videos obviously take weeks of filming and editing to get put out. The people that just want to see milling machines cut metal, and lathes turn off chips, are just hipsters that want to watch "oddly satisfying machining videos." Most machining content is for Machinists who are trying to learn. It's not for hipsters to watch so they can feel like they're connected to the trades, act like they know about actual work, and act like they know about machining because they watched a few RUclips videos. This style of videos are strictly for entertainment, not education.
I love how this video showed everything we needed to know in less than five minutes. Bravo!
Thanks for watching, much appreciated
you are amazing plz guide me i am also making videos on different things making in Pakistan please visit my channel and check my work @@mymechanicsinsights
At 2x speed I learned in 2 minutes
Exactly. This video made my day. This comment also made my day.
Quite clever. I’ve been a toolmaker for over 40 years. Never too old to learn new tricks. Well done sir.
How much do you think this machine cost? The accuracy is so impressed
Absolutely gorgeous work. I work in the aerospace industry at the Kennedy Space Center. I had to show some of the machinists this video and they were all in love with the design as well as your execution of a goal and how it turned out. Bravo. 👏
Wow, thanks!
Can I get an internship please?
Any room for a well rounded welder fabricator cnc guy there?
@@brainfarth Stennis Space Center is relatively close to me, they had an opening for someone to work a printing press, best I could discern from the posting. They wanted someone experienced with government presses and was also a journeyman welder that was a master at Tig. Those were the 2 biggest hurdles, because I'd think veteran welders would be welding, not working printing presses, and vice versa but idk. At any rate, I had ~7yrs experience as a machinist in the field, could always pull more than my own weight in the shop, programmed multiple machines and ran them on my own shift for a while even but that wasn't nearly enough to get Stennis' attention. Iirc the pay was like 34/hr, if not higher, and I was making under 20/hr so I had to at least try lol
3 jaw versus 4 jaw.....please tell me that the "aerospace industry at the Kennedy Space Center" has a lathe with a 4 jaw chuck and doesn't turn everything in a 3 jaw....Bravo if they invested in a 4 jaw!
I'm 92, and manual machined something similar back in the day. You do beautiful work.
92s Omg
wow you've been Blessed my man
92 and using youtube?
@@matthewp1682 yeah my grandpa loves mrballen
@@e10-x3m ya my grandma is 102 and she loves stevewilldoit and mrbeast
I love the way that there's one disc at the center of rotation in some of the shots that is stationary as the rest of it spins. It looks really cool.
Pretty similar to standing waves!
Thats what she said
@@kinbolluck476 💀
I didn’t even notice until I read this comment. That’s soo cool. Amazing work.
Let's call it The Equilibrium Disk.
I'm only 2:20 seconds in and my brain already hurts trying to understand all the math involved in defining that shape. Just brilliant work and a proper pedestal for the 8 ball!
haha, keep watching ;-)
Your brain hurts, you realize he did this after buying stock in pain meds company, knowing he will make brain hurt & then pain med company stock goes up :)...
@@BabaG stonks. That's even more of a big brain move. Trying to understand that level of foresight makes my brain hurt even more, further increasing stock prices and the cycle continues!
like a scrolling sine wave
@@bobtheblob2770 YES! And a small, offset, segmented cylinder inside a larger cylinder. It's a sublime optical illusion when it's rotating around it's Z axis.
As engineering students, we learnt the beauty of lathe machining - it is a great art - and society is indebted to men behind these machines who made our lives easier.
Especially, that lathes can kill in the most gruesome way. Hands down the most fucked up gore I've ever seen.
@@cor.tenebrarum at least it can kill quick, or just give a little mutilation.
@@cor.tenebrarum You saw that Russian guys video too?
Lathes are terrifying
I'm approaching 70. been retired for 4 1/2 years now. Started way back in 74 and that was fandamntastic. Thank you for showing that.
The most amazing thing I have seen turned on a metal turning lathe, simply brilliant😮👍
Thank you very much!
Incredible!
It's especially awesome, because that 8 ball is my fave video on his channel. One of my faves on youtube in general.
You ought to look into 5 Dimensional CNC lathes timelapse videos, if you want your mind blown at least. But for just doing this by eye and by hand, this is awesome too in its own way!
I was wondering how you were going to offset the part in a 3 jaw chuck.
That was mesmerizing. I'm glad you chose it for the 8 Ball. It needed a worthy stand and you created one. When you showed those marks before, you said they would make sense and, wow, did they ever. Thanks, MM. That was fabulous.
Thank you very much Vickie as always :-)
I used a Lathe for the first time today. Fun experience but I realised just how long and stressful of a process it is. I also burnt myself so many times because of the "metal shavings". You have all my respect for this video.
Thanks for a great learning experience with no obnoxious music, long boring and unnecessary details. The video showed all that is need to do this project. Excellent! I never thought of setting the 3 jaw like that.
2:27 Kind of cool to stare at that one disc that’s basically stationary in the middle when rotating. But I would really love to see the math behind this. This could make for a very cool candle-holder
It was the exact centre, so he got the maths exactly right. So cool.
Wu
Just look for "helix"
It's just geometrical. Keep watching the video, think about everything, and you'll figure it out. Otherwise, show this to any trig math teacher who can explain sine waves. Or study sine waves yourself.
Bruh there is no math involved.
I am a medical doctor and watch CNC videos sometimes for a change as it fascinates me. This was one of the most interesting video I have ever seen. Short, Smart, and Sweet.
I've been in machine shops since 1974 and this is some real talent. Impressive, very impressive, and all with a three jaw chuck.
I'd humbly state that there's nothing wrong with a 3 jaw chuck, imo. They hold on to pretty much anything (small, large, wide and the long materials), if set up correctly... as far as i've seen.
Not that i've seen or used anything But the 3 jaw chuck, but that's...beside the point, right? 😇😅
@@aurorincorporated guess it really just depends what your doing
@@aurorincorporated They're not particularly good at holding square stock...
I don't want to be mean, but what talent are you talking about?
The dude offcenter the piece, and gives a quick pass at it. Any 5 years old cna do it
@@brandondallaire
There are 5 year old machinists? 😮
I have a friend who's been doing machining for some 45+ years. He has his own shop and all. You're the second person I've seen making this kind of part. I saw him making an almost similar part for a cargo ship. The captain of the ship thought it had to be done by molding but my friend told him he can cut the piece from a chunk of metal. After seeing the part the guy's jaw was dropped. This was around 30 years ago.
Great work. Thoroughly enjoyed watching it.
Cars crankshafts are made in a Similar way. Definitely cool!
I was wracking my brain thinking how on earth you'd do that on a lathe... And once I saw it, it was so obvious I thought how did I not think of this?! Really cool...
"Learn the rules like a pro, so you can break them like an artist." -Some important artist, probably
This is funny and entertaining to watch. Now I'm retired, but I worked 43 years in a metal workshop milling, turning, boring, welding and so on. First 10 years with manual machines and then with CNC and CAD/CAM. I think metal working (same as woodwork) is a bit underrated profession in these days. I was always excited of my work.
Good. Working with 3 jaws self centering chuck on cetre lathe. Good product. Innovative.
*holds on to her face in awe as she realizes that her workplace will never be doing or having her do stuff like that*
This is incredibly, ridiculously, amazingly cool! Thank You for sharing this with us!
You can even make greater things with a CNC-machine
This has already been watched over 10000 times, although it has not yet been here for an hour! Thank you for great content My Mechanics. 👍 Since I started to follow these videos I have bought a lathe of my own.
Thank you so much for your support :-)
I was most impressed with this offset metal turning video. I decided to use the technique using 42 mm diam. Aluminium. I modified the ends (since I'm not a billiard player or golfer) putting a fancy knob on top and knurling the base. The result was vey pleasing and makes a nice ornament/ talking point in my home.
Ive been a Machinest for 20 yrs approximately, Went from All manuel to Pure Automated. Well watched my Company Literally Replace every Manuel Machine in the last 5 years. Now we have All new Mazaks, Nigatas, Shibauras, Toshibas Tue’s, Megaturns. We kept like 1 Bridgeport, And A couple bridgeport heads for custom Work. But this has to be the most fascinating thing ive ever seen. Ive seen some badass stuff made By old Machinests. This is dope
I'm definitely going to try something similar on my homemade wood lathe. It's definitely not powerful enough for metal but this gave me an idea nothing obviously as fine or small as this but something creative
go for it!
pretty high chance of it breaking if made of wood but id like to see it done.
@@darkshadowsx5949 maybe if they used very dense wood for it, it could work?
Would love to hear about how the idea turned out (pun intended).
I did my trade in the 70's and I was never shown this aspect of a 3 jaw chuck. Good show sir
Queenslander.
With a simple idea a masterpiece, mindblowing piece was borned!! Great
Mindblowing craftsmanship!! Simply amazing!!
Simple and exactly what you need to say.
What a great comment.
Thank you very much!
When you hear people say, "Wow, who thinks of these things??", the answer is people like MyMechanics. I love it when math is used to make something beautiful like this. The beauty of science. This pedestal and 8-ball would be great to put where you meet with potential clients so when they ask how good your work is, you just say "I made those."
There is no math involved in making this.
@@Dead_Goat What's your problem? I am seriously not in the mood for stupid replies like this. I see the beauty of the math that explains shapes and patterns like this. No math? Did he just flip on the lathe and it was magically on exactly the right settings? F off.
@@Dead_Goat Scribing 18 lines, every 20deg. Yep no math in this at all, it's all magic numbers that just work, right?
@@ducewags its common sense. Marking lines or turning things is not maths.
beauty of nature. Science is not even a thing.
*I've been a Journeyman Machinist most of my adult life. (I'm almost 62)..I didn't even know you could do this on a lathe.. I wish I had the words to express how cool this is...I'm just not that smart...Incredible is the best I can come up with*
so simple, yet complex.
This is art. Not the piece itself but the video combind with the piece - the whole process. Well done!
OMG the coolest project i have ever seen!!! Spectacular 🤯🤯
Glad you think so :-)
Simply amazing. I'm 934 years old and I've been make tools for 346 years and never seen something as incredible as this!! Very clever
I could see a really cool desk lamp being made using this method on a larger stock piece, maybe cutting a pocket out on the end pieces for electronics, etc. This is awesome!
WOW. I have to admit that I don't know that many professionals of lathering but you are a true master. Not only because obviously you know how to handle a lathe, but also for the incredible designs you imagine and THEN do with your lathe. I'm wordless, really.
You are without words.
@@sleepCircle Thanks for the correction, English is not my mother tongue. Still, can't see a huge difference between "wordless" and "without words", I've seen both in writing, but obviously I was missing out something from the context because on my mind both are equivalent. Could you please elaborate? I know this is not the best place but still 😇
@@DervishD I believe it is not that "wordless" is incorrect, per se. But this is a common turn of phrase, "I am without words" is what one would expect to hear in such a usage.
@@hankkingsley9183 Oh, that I can understand, thanks a lot for the explanation 😊 Curiously enough, "I am without words" is more or less literally what we say in Spanish, but to me it sounded worse than "wordless". Always learning, I suppose! Thanks again!
@@DervishD speechless may be better than wordless, heard this phrase a lot
I’m 22 4 years in the lathe setup and program and this is incredible never seen anything like this love it 👍🏽
Love you work sir❤️.
Its just awesome and addictive.
Thanks :-)
That was brilliant! Super complex looking but simple to execute. I never though of offsetting the jaws on a 3 jaw. Too cool..
It's so mesmerizing and yet simple - after you've shown the method - it just makes me smile. In the same way as when you see a magician pull a really cool trick. Thanks man. That really entertained and impressed me. 😎
You are not only unbelievably skillful engineer, but also a great artist
ist kein Ingenieur ,ist ein Dreher .
@@lotarzi1 ممنونم بابت توضیح شما
When I see things like this I am reminded of the videos of the FORD auto factory(and others) where they show all of the automated machining and assembly processes from the days of the 1932 FORD/etc. My thought always is....WHO THOUGHT OF THAT?
These days of CNC are amazing, however I marvel more at the old days of manual machines and the way they were applied.
CNC is amazing and modern factories are by no means easy to design but the old videos amaze me to no end.....remember - 100 years ago!!!
You never cease to amaze me with your brilliant setups! An incredibly easy way to turn offsets...with a bit counting jaw turns and of math of course!! 🤯😎 Thanks MM, beautiful piece fitting for any 8 ball!
Thank you very much!
Pretty amazing. First I thought this is an animated 3D model done in Blender! 💖😳
Wow, thanks!
2:18 *This video shows exactly why I love machining content. I wish more channels had your level of cinematography and effort. Great job*
Wow, now that is what I call exceptional lathe work. Never seen that done before. Cheers dude
Thank you very much :-)
Wow. This takes experience, knowing what your machine is capable of, plus a ton of practical knowledge (ie the whole setting up with height gauges and making marks to know to turn the part 20 degrees each time) to achieve. I’m fresh out of trade school and Ive realized there is so much that you don’t learn in trade school. I’m at a small job shop trying to learn every little bit I can and like uploading time lapses of what I’m working on, but this is next level
Absolutely! It's incredible to see the level of skill and precision involved in this work. I completely relate to your experience - trade school provides a great foundation, but there's so much more to learn on the job. Keep pushing yourself and sharing your progress; it's inspiring to see others grow in their craft
Yes VERY TOP notch work. A smart person is smart, A smart person with an imagination is unstoppable !!!!!
Looks like a miniature Formula 1 trophy. Very cool!!
It does!
I do love your lathe work, always coming up with some really great designs. Just thinking out loud but two of these could be made into a single double helix… that’d be seriously cool!
Yeah indeed, but that might be a two parter
@@mymechanicsinsights Two parter, double helix. :D
@@mymechanicsinsights for sure it’d be a two parter but if anyone can make it look like it was just one… that’d be you for sure.
Could you make two identical copies then slice off opposite halves of the disks at each end to make them both semicircular and out of phase with each other. Then interlace the two parts and bond it together at both ends.
The single helix is pretty spectacular.
A fascinating way to show the relationship between rotational motion on a circle and the sinusoidal functions. By offsetting each cut, you've essentially just taken a "value" of sine/cosine at that degree mark. It gives you a discrete sine function shape across the piece, that when viewed from the top or bottom, has also encoded the angle that the cut was performed at.
Terrific machinist skills showing an elegant mathematical relationship!
Not gonna lie, I got a little dizzy watching that thing spin around 😅 Very cool video, great job!
You and me both!
@@mymechanicsinsights I can't imagine trying to focus on on that work piece, just watching this made me have to stand up and blink a couple times
@@mymechanicsinsights 😂✌🏻
That is really cool, I love it. You are so clever
Thanks so much 😊
This has got to be one of the most enlightening videos I've seen. Many thanks. Mind blowing, clever, innovative elegant thinking!!! 😊 Much respect!!!!
You're incredibly talented
Many thanks :-)
Amazing work!!!
Thank you!
WOW! When slowly spinning it is hypnotic. Very cool 😎
I feel like this would make a good "windmill" (wind chime* , thanks "murk 135") type thing attached near a window with a string. Very cool project.
Did you mean wind chime???
@@murk1352 yes sorry lol. Thanks
@@TrophicFault I thought that’s what you meant…👍🏻
Как легко получается то, что продумано и выверено с математической точностью. Это завораживает.
Да уж, так легко-легко. Легче лёгкого. Раз плюнуть. Про завораживает соглашусь.
Это, что-то нереальное.
I'm 120 and I've been manual machining these since 200 B.C. Fantastic work
Fantastic looks amazing thanks
Hope you enjoy
This is amazing, a true art
Thank you very much :-)
That should go to a museum, it's ART!!!
That was so cool and I am thankful for the work you put into it. I was wondering where the 8 ball was, then, there it is!. I don't have a stand, I make a new one. Very original. Thank you.
That was incredibly satisfying to watch. How long did the filing sharp edges take though? 😅
10 seconds. Didn't you watch the video? 😝
Around 2.5 hours
@@mymechanicsinsights 😬
Beautiful job,a small tumbler,as used for jewellery,with stainless steel medium would give a magnificent finish.
I am fascinated by 15th century ivory turnings and I have never been able to understand how they made staggered turnings like this. Now I know. Amazing.
1:10 Can also get non-concentric rotation by adding a spacer between the work and one jaw.
Making two of these that interlock together to make a double helix would be really interesting to see and probably an equally exciting mathematical engineering challenge.
I thought it looked like a DNA strand.🧬cool engineering traits unlocked.
It's not all that complex- make a similar helix, thread it in, make sure it's 180 degrees out of phase and you've got a double helix
I didn't even know you could do that with a lathe. That's so cool. It looks like some kind of science trophy lol. Watching it spin in the lathe jaws was almost hypnotic. Very unusual. I love it.
Since I've watched everything you had posted on this channel and the second one :D I really have to ask.. there is something you can't do !? :D You are one of a kind sir ...
yes, welding ;-)
Rotating off centre like that, it must be a beastly strong lathe to not just fly apart. I guess that's why you kept the rpm down. Does the hammering of the tool create a series of facets, or are they gradually smoothed to near circular by running for a while?
Duh! Keep the RPM down and one hair getting caught in it won’t send you flying to minced shred like how at normal speed it would
I've been a turner for over 6 years and never seen this one before!! You're such a genius!!!
0:21 whatever gun is loaded with THAT i do not want to be near
It kind of looks like a shotgun shell for small artillery cannons.
If the hunk of metal were to be a bullet, I’d say it looks like a 30mm shell, which is commonly used in CIWS and CRAM. If you decide to look up a photo of one of them firing, just know only a third of those bullets it fires have tracers.
How does this not break ?! that's amazing !
The trick is starting from right to left.
Human Ingenuity will never cease to amaze me. Fantastic job.
@1:30 : oh, right, duh .
First. 😎
Almost!
You really make iron play a symphony that pleases the eyes and the soul before hearing, well done
But what does the part do?
this is when you have the knowledge. my respect for this man!!
He truly is a master craftsman, his restoration videos should put the original manufacturers (and service centres) to shame. Truly beautiful work.
I've dabbled in turning before but never have I ever thought of turning something off centre. I'm def going to try this. Cheers mate.
im a 143 year old male, and im a fry cook by trade. ive never seen such perfect craftsmanship in all my years. truly amazing
Beautiful work 👏👏👏
Absolutely bad acid. Love it.
I dont know anything about tools or this machine but thus mans mind is very creative and thinks beyond what he sees, very interesting
Nádhera, to jsem ještě neviděl!!!😊❤
This *turned out* to be great XD
This has been recommended to me at least 20 times, fine, ill friggen watch it god damn
I like many other comments here that have been machining for 40 plus years and I never saw this done. great work. I'm going to have to make one.
Amazing work! You're an artist! Cheers!😁👍🛠️🔧
What a delightful bit of machining. Very nice work, simple in conception but very well executed.
as a Turner i can't. Believe it 😮😮😮😮😮😮😮
awsome bro
you have some good skill 👌👌👌❤️
Better than anything you'll find in a modern art exhibit.
EXCELLENT. I was needing something interesting, different, and educational to do. THIS will keep me busy for a while. THANK YOU.
At one point I thought I was being Hypnotized! Great Work!
I never knew that the Jaws could be rearranged like that on a lathe.... Thank you for showing me this it was an educational experience thank you so much
This is insane!! Love it!