Beko WTK washing machine service test mode and diagnostic 2020 onwards
HTML-код
- Опубликовано: 25 авг 2024
- How to enter test mode on Beko WTK72011 WTK74011 WTK82011 WTK84011 WTK94121 WTK10412 Series washing machines diagnostic & test mode to repair faults and test errors plus much more info on other repairs
www.how-to-rep...
Error codes explained digital display and LED types 𝟮𝟬𝟮𝟬 onwards
▶ • Beko washing machine e...
▶ If you have any problems with these Beko washing machines
www.youtube.co...
𝐓𝐇𝐈𝐒 𝐇𝐄𝐋𝐏𝐒 𝐔𝐒 𝐍𝐎 𝐄𝐍𝐃, 𝐛𝐲 𝐩𝐮𝐫𝐜𝐡𝐚𝐬𝐢𝐧𝐠 𝐭𝐡𝐫𝐨𝐮𝐠𝐡 𝐭𝐡𝐞𝐬𝐞 𝐥𝐢𝐧𝐤𝐬 𝐰𝐞 𝐦𝐚𝐧𝐚𝐠𝐞𝐝 𝐭𝐨 𝐰𝐢𝐧 𝐚 𝐬𝐦𝐚𝐥𝐥 𝐜𝐨𝐦𝐦𝐢𝐬𝐬𝐢𝐨𝐧 𝐨𝐟𝐟 𝐞𝐁𝐚𝐲. 𝐀𝐟𝐟𝐢𝐥𝐢𝐚𝐭𝐞 𝐥𝐢𝐧𝐤 𝐭𝐨 𝐁𝐞𝐤𝐨 𝐖𝐓𝐊 𝐰𝐚𝐬𝐡𝐢𝐧𝐠 𝐦𝐚𝐜𝐡𝐢𝐧𝐞𝐬
ebay.us/10bv3C
if you are needing new or used parts for your Beko washing machines in the future please visit the website and use your full model number
🛒 www.how-to-rep...
#beko #test_mode #diagnostic
Please remember to subscribe to our channel and click on the bell notification to get reminders
www.youtube.co...
Remember to Shop with www.how-to-rep... and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.c...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels
social media as this really helps my site and keeps us going.
RUclips. / apart4u
Facebook. / how.to.repair.appliances
Beko actually manufactures for a vast array of brands which you can see below, and this video will help diagnose any problems that you may have on Aftron, Ahma, Alpari, Altus, Ansonic, Arcelik, Arctic, Aya, Baoerma, Beko, Belling, Beta, Blanco, Blomberg, Bluesky, Bomann, Brandt, Bru, Carrefour Home, Codini, Continental Edison, Crystal, Cucine, Cylinda, Defy, Ecron, Elba, Elektra Bregenz, Elettrozeta, Elin, Elvita, Eskimo, Essentielb, Far, Federal, Fensa, Fisher & Paykel, Flavel, Fortress, Friac, Fricon, Generalmatic, Gplus, Grundig, Haka, Hyundai, IFB, Kenwood, Keysmart, Konka, Lamona, Leader, Listo, Majestic, Montpellier, New World, Nikkei, Nortline, Oceania, Oceanic, Orion, Pars, Peabody, Perfect, Philco, Princess, Prolux, Raymond, Royal, Saba, Saivod, SanGiorgio, Sang, Schaub Lorenz, Selecline, Siera, Singer, Speed, Starke, Superfrost, Tecnogas, Tophouse, Venus, Vico, Victory, Videocon, Wasco, Westpoint, White-Westinghouse, Winstar, Wpro, Zenith,
Update following emails and speaking with you about my WTK72011W, which had an intermittent fault causing it to stop mid cycle
It was an issue whereby the plug cable had become trapped either causing the wiring loom to loosen or for it to ground against the case, since I have move the cable to a better position the machine has not had any problems
In simple terms, what buttons should I press to activate test mode?
Thanks so much for all your videos - they’re super helpful and informative, without feeling like you’re being bombarded with lots of technical jargon!! Massively appreciated! Keep up the good work and thanks again!!
You are so welcome! Hope you had a good New Year. Please remember to subscribe to the channel as that helps us
Thank you for your kindness of taking us through those steps 👍🚿
Thank you for this, so clear to follow. I get an E17 code that doesn't seem to clear, so I can't run through each step when pressing the start button. However, but the problem is the machine not starting until opned and closed the door several times. Could this be a door mechanism issue?
wow ! EXCELLENT video !!
probably one of , if not THE best walk through videos ive ever watched on youtube well done that man 👍
im having probs with a zanussi w/m completely different ... but watched yours till the end as information was so brilliantly conveyed well done 👍
Another great video. 👍
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank you for sharing your expertise.
My pleasure! I hope you managed to diagnose the problem with your washing machine What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @umaryam1704 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
I tried your sequence on my machine thank you it worked. Mine is an WUE8622 and when switching from spin test to water test it waits a bit for the drum to slow down and than carries on. Did you ever come a cross a problem when the motor spins normally in one direction and 90 rpm in the other. The other direction test couts out after 15seconds
Using this video I was able to get into diagnostic mode to try and troubleshoot my machine stopping during cycle. While in diagnostic mode I see the same as you it seems, it stops during the right hand spin at low rpm. All other tests complete fine. Did you get to the bottom of your issue at all? Yours is the only mention I've seen of it in my research tonight. I do have a different model but the behaviour is the same. Thanks in advance!
@@ScotiaGaidin does it spin at higher RPM? Mine was turning faster that it should be and after 15seconds it accelerated and stopped. I didn't come to the bottom of this. But I did manage to analyze the communication between the main board and the inverter control boart. To my suprise the main board is sending the higher rpm information to the inverter and after 15seconds it sends a strange message that is not seen on any other tests. The inverter does not recogize the command and it cuts out. So the main board is funky. My machine had a different problem. It was working normaly and from time to time it just failed to start a rotation. This gor more and more frequent when the motor got warmer. I cheated and fitted lower current sensing resistors and i installed lower back EMF sensing resitors. I added some protection diodes for the MCU and it got alot better but it still cut out after an hour and a galf of washing. By cout out I mean it was spinning in one direction, stopped and it tried to go to the other it just vibrates and stops. It waited for that cycle and tried to star in the other. Sometimes it did sometimes it was the same problem. I changed alot of parts on the inverter board. I did fet better but not as expected. In the end i just gave up since I got another used machine. My money was on the motor itself in my case. The magnets got weaker as the motor was getting hot. Waker magnets means lower torque and lower back EMF signal for the rotor position and it means higher loses wich in turn mean more heating
Thank you for the video! Anyway, i have beko washing machine also, when the washing process finish, the display shown "Cd" on the screen and door locked, what should i do?
Hi, I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Is that Beko model another sealed drum variant?
This was very useful, many thanks for taking the time.
Thank you 🙏
Glad I was able to help with your washing machine? What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @stevejones7622 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hello.... my machine is a WIR series machine. Does this method get my machine into diagnostic mode?
I followed you steps anyway.... and it came up with E03.
Am I correct in saying this is to do with the heating circuit?
Apologies for all the questions... fantastic videos by the way... 👍🏻
You helped me so much with these videos. Thank You very much!
glad we could help you @mr.t7186 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
also works on my WML-series 6kg Machine. Its interesting seeing it spin in full-throotle xD
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I discovered that Howdens use a Beko with out the branding this worked on it the only difference was that there was a separate power button which took a few attempts to get into.
my machine is a wtb82oe1w i did your teat but it would not do the spin test any tips on how to sort it out thank youh
thanks for making these videos there very helpful :)
Glad you like them!
Hello, I'm hoping someone may be able to advise or point me in the right direction on what's going on with our machine. Our drum won't spin for any cycle (it will rotate by hand) and I can't hear any motor sounds other than the drainage pump. I've tried the diagnostic mode as per video:
1200 light didn't come on but the 1000 spin and 600 spin lights did light up. Next click of the start button had all the lights flashing so I'm guessing those two initial spin numbers are my error codes? From there, I pressed the start button several more times with around 30 seconds gap between each press but after an initial click (presumably the door lock), nothing at all happened.
The machine is not even 3 years old so I don't believe/would hope the motor hasn't failed already. Any advice would be much appreciated.
I'm not sure if it would be related but a couple things I think are worth mentioning are: I checked the drainage filter and found a small hair clip stopping the propeller blade from moving, removed the clip and it now fires up on the drainage cycle. I never noticed an issue with drainage before so my hunch is that the clip has triggered a safety feature of the drum not spinning but I'm really just guessing as seems a bit of a coincidence.
I also had to change the door seal around 6 months ago as found a small tear in the old one. The machine has seemingly been fine since that repair but thought its worth a mention.
Any help would be greatly appreciated
Ps, they don't build things like they used to... our old machine went on for close to 20 years between my parents and ourselves, this beko is not even 3 years old and as previously mentioned, have already had to replace the door seal and now it's broken down again. Starting to wish we held on to the old one now 😅
Hi, WTG620M. Any idea how to get in test mode? It has a basic LCD screen. That method isn't working! Thanks
No idea sorry have not worked on this one
i have a wte model and all led are light up how do i fix or reset?
Hell I use this exact machine but it washes the cloth and not dry the cloth, do I have to use the spin every time I wash my clothes? Please reply
Hhi have put mind on a test mode but the drum is not spinning can you help please
Hi do you have a vid on how to reattach the seal on this machine ?
There are over 400 videos on my RUclips channel. I'm sure there will be something there to assist you. @mariahwilsonxox please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Thanks for the great content. Sub'd.🙂
Great Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
Thanks 👍
Please help, machine won’t spin, loading with water and drains. It only says E not giving me a number
I’ve got 1200, 800 @ no spin showing to me that’s 21 but no details on that
Hi Adam it's very hard for me to understand what your problem is from the description. If you need detailed assistance please use the contact us page at the website and I would be happy to give you a call if you're in the UK to assist you if not leave your full model number and PNC number and I'll try and find any information I can on this machine for you.
Thats the one i have but no hot water
👍🏼
Very glad I could help you with the washing machine. These test modes are tricky if they are the LED version glad we could help you and thank you for subscribing to the channel that really does help us