Beko Soldering the triac, Washing Machine PCB repair, Beko WM 85135 LW, another stab in the dark!
HTML-код
- Опубликовано: 12 сен 2024
- If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links:
TRIAC: (Check model): amzn.to/3j5qXQ4
Soldering kit: amzn.to/367uGcw
As an Amazon Associate I earn from qualifying purchases.
Hold the tip of the iron onto the joint then slowly feed the solder onto it, this will distribute the flux inside the solder for a good solder joint
its so cool when see you fixing that pcb
please do more pcb repair of washing machine
and the parts and explain the problems and the parts those cause the problem
thanks
Blind leading the blind 😅 thanks for trying
This has just told me that my PCB board needs replacing, as all my macine does is start for a second or two, then stops, no matter what its asked to do. The board is only 20 odd pounds, so i think thats worthwhile buying. As this is my model, youve also shown me its easy peasy to get at 😂no headache here now, at the thought of the possible pig of a job 👍🏼.
Great. Let me know how you go!
Sure thing 👌, it'll be smiles all the way, or tears 😂thanks for sharing the video 💪
@@shannonreed9808 I have the same problem with my washing machine, it starts and then stops for 30 sec and then again.
Can you tell me have you fix the problem and how?
Please be honest with your answer it means a lot to me
Do not use lead free solder and apply the solder to the joint and not the iron.
Rosin flux would do much better joints when soldering. Also it prevents making bridge.
Thanks man
Hi bootsowen and everyone else. I'm trying to fix my elderly neighbors Dyson washing PCB digital control board because the first 3 words out of the 6 are to faded to understand and read. How do I determine if a component is faulty when taking the reading with a metre please. Any other tips or advice will be appreciated and it's for a Good cause. Great video thankyou.
Hi, why not post the question on the appropriate dyson video? If the display is dead then you need a new display, there is usually one for sale on the internet. But why do you need it to work?
Hi BootsOwen and everyone. I posted my comment on your video because the control board partially works and I'm hoping to try and repair it, the first 3 words on the digital display are to faded to understand and read, but the final 3 words are crystal clear, can you please help me I need to know what setting I need to put my auto metre on to test and find the faulty little capacitors etc on the circuit board, and can you explain what reading determines a faulty component and what reading determines a good component on the controls circuit board please, I hope that makes sense. Brilliant effort. Great video thankyou.
Hi could you give me any pointers I have a similar Beko machine , It all programs fine but when I press start after 2-3 seconds the program kicks in and it trips rcd breaker. I tryed plugging my dryer in on that circuit / socket and it works fine . About 7 years ago a technician replaced the pcb board and motor under warranty after my gf accidentally loaded a nappy after that the motor whined and eventually the board went. Any idea’s why it’s tripping when I opened it up today I suspected ir was the triac as the dappy cow had washed a double quilt last week 😅 it struggled . Is the triac similar to a mosfet ? Do they burn out ?
If it is after 2-3 seconds then that is when the door interlock should kick in. Could be that. Worth checking motor brushes maybe. But door interlock has to lock first. Try it again and see if you can hear the door locking before it trips. My moneys on the interlock. Let me know how you get on!
@@bootsowen It was the heater element . Fixed it by taking the back off and removing the wiring then it stopped tripping the circuit breaker. The part was £25 from a local supplier. 👍
Hi could u help me with my board it doesn't switch on it the same make but it a defy
How is it that you think I could help. I have posted many videos of repairing boards, If you search for Bootsowen PCB you might get more help.
hi bro i have same brand and it have also pcb problem only the ONN/OFF and Start and Stop button is working and the Selector and the other button is not working can you Help me Please ??
Hi, how do you think I can help you?
It looked like two resistors were burnt in front of the triac
the small pcb on the right is the one that works the motor it will have blown,
@@andrewrobinson1632 true done many
You have to learn to solder.
Have you posted a video of how good you are at it?
Lame reply bootsowen, he is right you don't know how to solder. You should hold the soldering iron to the element and you add solder after, try it.
waste of time