How to Buff Using the Presta Ultra Buffing 3-Step System
HTML-код
- Опубликовано: 6 авг 2024
- The Presta Ultra Buffing System is a three-step system that cuts P1500 sand scratches and leaves a swirl-free finish. Designed to work with a rotary buffer, the Ultra Buffing System works with both hard and standard clears.
Plus, the Ultra Buffing System Shop Pak provides everything you need for complete paint refinishing after sanding - from compounding to polishing to protecting your flawless, swirl-free finish. - Авто/Мото
That super cut compound f#*ked up my boat! I gotta wet sand the entire thing now.
I tried the one with the grey top and grey pads to remove swirl marks from my car. It wouldn't do it. Got any ideas on how to I can get the swirl marks gone? The paint is around 23 years old and seems to be a single stage paint with no clear coat. It's on a old street rod. Thanks
Can I use this with an orange hex logic pad??
Question, why this video shows two wool pads and a foam but other presta ultra systems show a wool and two foam pads?
Not sure if I can get an answer here but we use this where I work. We've used the 3 step product and had okay results on dark colored cars. But we've noticed after they've been washed if the customer returns for some reason, it's all swirled up. Are the whirl marks unavoidable? What might we be doing wrong?
It's really important that you only use presta products from start to end. and after polishing with the 2 compounds then glaze with the swirl remover and then wash it up to eliminate compound stock in cavity, then Wax the whole car with the Presta Fast Wax by apply it with your hand ! this is really important and this was writen with the presta polish kit to not wax with a polisher after compound it. maybe there was your mistake. you can also clean your car with isopropyl alcohol between each step, this will clean the residue.