press and hold sync button here and presseject button here 4 times press and hold sync button (don't let go) First press, then count the blinking light 4x blinks means the code is 0 secjnd press then count the blinking light 4x blinks means the code is still 0 third press, then count the blinking light 2x blinks means the code is 2 fourth press, then count the blinking light 3x blinks means the code is 3 press once more to return to default 1=1 2=2 3=3 4=0
When I received my first ROD on my Xbox 360 E, I had an error message before the console turned off "Insufficient ventilation" just to find out my fans died when I replaced them myself :/ Sometimes, some ROD reasons can be found when the console is on long enough, like I had with my experience. Right now, my console still has some issues, but no ROD again. I'll come back to this video when I do get a ROD on the console again (I have a feeling it might be soon due to how the console is behaving). Thanks for the instructions!
@@sthetixofficial damn.. bought mine a few years ago and shortly after I got the RDOD happened.. but if the CPU is broken theres nothing to save anymore.. thanks for the awnser tho
0021 southbridge reflow 0021 i have fixed a couple of these by reflowing the southbridge 0021 - might be missing surface mounts around the SB area, reflow it. If no go, reball it. 0021 seen it before when gpu heatsink shorts against caps when too tight... 0021 bridging USB pins that are some info from the guide
7 known fixes. 1. "If you worked on the mainboard recently(soldered or so) remove these wires because you might be drawing too much power from the Southbridge Also look for missing/bridged components like capacitors/resistors" I don't know what this means as someone who's never owned an Xbox though. 2. Replace X-Clamps 3. Fix Southbridge X-Clamps 4. Reflow Southbridge or Ethernet chip area 5. Reball the Southbridge if there is a bridged solder 6. “if you work in dumping lite-on 8xxxx and 9xxxx with jumper, Check your dvd drive pcb (board) again, if there's still some shorting.“ Again, I don’t know what this means. 7. Wrong GPU model (e.g. Zephyr/Falcon GPU reballed onto a Xenon board).
@@Wertyhappy27 This error is caused by a bridged solder joint under GPU or Southbridge. It can also be power related(the Southbridge isnt getting enough power). Can also be a component that is missing or damaged so look for missing and bridged parts(caps etc) near the Southbridge
StormFairy YT If your Xbox 360 is broken, the light would illuminate red (as in this video). If you know the secondary error code, it tells you the exact kind of fault.
@@sthetixofficial Nope. USB port (bridged pins) Known fixes: 1) Unplug all USB devices that might be connected to your 360 2) Remove solder from the pins under the USB ports so that they are not shorting out anymore, also check the ports themselves and make sure that the pins inside arent bridging
Здраствуйте, а у этой ривизий xbox 360 e часто случаются поломки или перегрев с красным огнём ? Я вот решил преобрести такую консоль не прошитую именно ревизий E, и вот теперь хочу ознакомиться с пробоемами. Если вот раз в 2 или 3 года менять термопасту и чистить от пыли притом если она будет стоять в хорошо продуваемом месте с дополнительным 120мм кулером на выдуве. Вот каковы шансы перегрева в таком использований ? прошу пожалуйства ответьте.
0023 - This error is unknown but assumed to be a short either under Southbridge and (H)ANA chip or in between these.Look for 0021 and 0022 and reflow the Southbridge-> HANA chip area, the X-Clamp Fix might help as well.
It's not red ring of death which is good but I was playing 2k16 and my Xbox 360 froze so I turned it off then turned it back on and got the red light which sucks
@@sthetixofficial oooh okay sorry, Funny story when I got the 360 it worked fine but on the way back home we hit a bump a everything rattled around. That may have killed it 😅
press and hold sync button here
and presseject button here 4 times
press and hold sync button (don't let go)
First press, then count the blinking light
4x blinks means the code is 0
secjnd press then count the blinking light
4x blinks means the code is still 0
third press, then count the blinking light
2x blinks means the code is 2
fourth press, then count the blinking light
3x blinks means the code is 3
press once more to return to default
1=1
2=2
3=3
4=0
Thank you. I finally have the code but don't know what the code means! My Xbox gave 0003
@@nakitabrandford8307 it’s a power problem, possible short or a cold solder joint under the cpu. Could also be mosfet or capacitor related
I think my code is 4330 or 4433 what does that mean?
When I received my first ROD on my Xbox 360 E, I had an error message before the console turned off "Insufficient ventilation" just to find out my fans died when I replaced them myself :/
Sometimes, some ROD reasons can be found when the console is on long enough, like I had with my experience.
Right now, my console still has some issues, but no ROD again.
I'll come back to this video when I do get a ROD on the console again (I have a feeling it might be soon due to how the console is behaving). Thanks for the instructions!
I never got a rrod on my 360e
Mine keeps flashing when I tried it
But powercase light is yellow
For me the green circle just starts blinking rapidly at a speed were its impossible to count.. and it doesnt stop
mostly bad cpu.
@@sthetixofficial damn.. bought mine a few years ago and shortly after I got the RDOD happened.. but if the CPU is broken theres nothing to save anymore..
thanks for the awnser tho
Could be overheating
bro...klo game xbox 360 gak bisa di start itu kenapa ya? saya download game... gamenya jalan tapi gak bisa di start , xbox saya slim 4GB RGH?
game jalan tapi gak bisa di start? = itu masalah di stiknya kali?
stik normal, game lain lancar
misal kalo ada 10 mobil di garasi lalu cuma 1 mobil yang gak jalan artinya apa?
coba diartikan dan analogikan saja
filenya corrupt? ok deh gan..mungkin saya akan download lagi
U r stupid idiot
When i do it
1st= 4 flashes
2nd= 4 flashes
3rd= 2 flashes
4th= 1 flash
What does it mean can you help me?
0021 southbridge reflow
0021 i have fixed a couple of these by reflowing the southbridge
0021 - might be missing surface mounts around the SB area, reflow it. If no go,
reball it.
0021 seen it before when gpu heatsink shorts against caps when too tight...
0021 bridging USB pins
that are some info from the guide
7 known fixes.
1. "If you worked on the mainboard recently(soldered or so) remove these wires because you might be drawing too much power from the Southbridge
Also look for missing/bridged components like capacitors/resistors" I don't know what this means as someone who's never owned an Xbox though.
2. Replace X-Clamps
3. Fix Southbridge X-Clamps
4. Reflow Southbridge or Ethernet chip area
5. Reball the Southbridge if there is a bridged solder
6. “if you work in dumping lite-on 8xxxx and 9xxxx with jumper, Check your dvd drive pcb (board) again, if there's still some shorting.“ Again, I don’t know what this means.
7. Wrong GPU model (e.g. Zephyr/Falcon GPU reballed onto a Xenon board).
i have a 1010 error but it doesn't work even when i remove the hdd, might be a southbridge failure
cpu error
Hi can you please tell what error 4421 means ?
4 = 0, so 0021
it could be the southbridge is damaged.
Hello I got the following,
- 1 time = 4
- 2 time = 2
- 3 time = 4
- 4 time = 0
Any idea what this could be?
cpu died
@@sthetixofficial No.
Cold solder joint GPU/RAM
@@ShorkBoi Hi, I got 0023, any idea?
@@Wertyhappy27 This error is caused by a bridged solder joint under GPU or Southbridge. It can also be power related(the Southbridge isnt getting enough power). Can also be a component that is missing or damaged so look for missing and bridged parts(caps etc) near the Southbridge
@@ShorkBoi any ideas for tools i may need?
Dude the red light flashed repeatedly on my xbox before turning off automatically, what does that mean?
it could be your CPU is failing, something shorting, etc.
Mine just have a red inner light and green out her light does not blink and when I shut it off it goes away but it does not happen allot
it could be anything.
What if it turns off before the code completes?
usually there is a short or any other hardware problem
When I do it, it gives me 4433, what does it mean?
I think the southbridge chip is dead
Did not work.
It does not blink but ejects the drive
I have a xbox 360 e solid red light plays as normal with red light can't sync and controllers anyone knows what's the issue?
My error code is e 82 please tell what can i do to fix it
it means the CPU is fried. Nothing you can do unless you want to replace the CPU
My 360 slim came up with the error code 0032, What does this code mean by any chance?
bad gpu?
I kind of got that but the center as flashing red
Probably overheated or something with power supply
I'm getting error code 4433 which I can't seem to find anywhere? And suggestions?
bad southbridge chip
I have the same error 0023. Does cleaning and replacing the thermal paste possibly fix it?
no.. mostly 0023 means bad southbridge
@@sthetixofficial Ok, thanks
@@sthetixofficial Welcome. Please tell me how to fix it or on where to look for a solution.
u need to use a rework machine to remove the southbridge then install the new one..i do have the video on my channel
If press and not get any green blinking light... This meaning what..
Dead?
@@sthetixofficial fix?
Better buy a new one
What does that mean? I do not understand :/ Could someone tell me a reason about that?
StormFairy YT If your Xbox 360 is broken, the light would illuminate red (as in this video). If you know the secondary error code, it tells you the exact kind of fault.
And what does that error code mean?
It say what type of problem your xbox have
Hey on mine it goes
1st: 4 flashes
2nd: 1 flash
3rd: 4 flashes
4th: 1 flash
What does that mean?
usually bad power supply
I found the code is 0101. What does that mean? I was wrong the first time.
0101 = cpu died
@@sthetixofficial Nope.
USB port (bridged pins)
Known fixes:
1) Unplug all USB devices that might be connected to your 360
2) Remove solder from the pins under the USB ports so that they are not shorting out anymore, also check the ports themselves and make sure that the pins inside arent bridging
I have mine and its 4141 what does this mean please respond
usually gpu cpu dead
Bruh can it still be fixed??
u need to replace the xcgpu
Здраствуйте, а у этой ривизий xbox 360 e часто случаются поломки или перегрев с красным огнём ? Я вот решил преобрести такую консоль не прошитую именно ревизий E, и вот теперь хочу ознакомиться с пробоемами. Если вот раз в 2 или 3 года менять термопасту и чистить от пыли притом если она будет стоять в хорошо продуваемом месте с дополнительным 120мм кулером на выдуве. Вот каковы шансы перегрева в таком использований ? прошу пожалуйства ответьте.
I have error 0023. Anyone know what this means or how to fix?
replace cap near heatsink c4e3
0023 - This error is unknown but assumed to be a short either under Southbridge and (H)ANA chip or in between these.Look for 0021 and 0022 and reflow the Southbridge-> HANA chip area, the X-Clamp Fix might help as well.
My Xbox 360 as soon as I turn it on afterwards it shows a solid red light any reason y
either the psu busted or the console has short somewhere
How do you fix it?
maybe it is better to find a technician near you.
It's not red ring of death which is good but I was playing 2k16 and my Xbox 360 froze so I turned it off then turned it back on and got the red light which sucks
it has something to do with the cpu I guess.
0003 means? Can I repair it?
you better buy a new console. it is a dead CPU
How do you fix 0023?
usualy u need to replace the southbridge
sthetix do you have a video how to do it?
i think i have a video about pulling a chip and replace it. try finding on my channel
When I do this it gives me 4414 and I can’t find it online do you know what it means?
dead xcgpu.
@@sthetixofficial sorry wrong code, I meant 0010 I looked it up and said bad south bridge thing so the boards dead 🥲
No. 0010 means dead cpu
@@sthetixofficial oooh okay sorry, Funny story when I got the 360 it worked fine but on the way back home we hit a bump a everything rattled around. That may have killed it 😅
Oh okay well please let me know if you need any help with Xbox
Mine is 0003, what does that mean? and possible fixes?
might be the southbridge is damaged
@@sthetixofficial okay thanks!
What is 0100
What does mine mean?
1st: 4 flashes
2nd: 4 flashes
3rd: 2 flashes
4th: 4 flashes
0020 = dead gpu
Bridged solderjoint/Short - CPU/GPU/RAM
What if you have an Xbox 360 without an eject button
U need to manually eject it
@@sthetixofficial ok thank you
1142? I think its just regular 360 it has 4 sections around the circle that blink.
there is no 1142, can you check that again?
hm, that doesn't seem to exist.
@@sthetixofficial I ve got 0023 what is it pls?
southbridge chip dead
There's probably a short under the Southbridge to HANA chip.
NO MEU DEU 0003...O QUE SIGNIFICA?
error 0023 error ventilator
Mine can turn on for a few minutes but after that it will turn red....
Overheated?
Hey I got 1142, what does it mean?
impossible to have that code.
441 and something else, but i can't see because it shuts off
Cpu dead.
Can someone help me
The circle keeps flashing
What if mines blinked four times each time?
i guess the CPU is f*cked
0101 Error, what it means?
i think its a dead gpu.
0101 - This error is caused by bridged solder joints under the USB ports or a defective USB device that is connected to it.
What does it mean if it doesnt stop?
usually bad gpu
What does 3131 mean? Help please
nothing like. that
mine is 0023 what it means?
0023 southbridge reflow
0023 trinity southbridge reball
0023 slim corona trinity replace caps near heatsink c4e3
0023 slim corona sb replace
@@sthetixofficial thanks 👍👍
Mine was 0033 can you please help?
bad capacitor at q7f2
@@sthetixofficial thanks
@@sthetixofficial sorry but how can I fix it?
Same code
@@nigerianprince_1443 did you fix it?
4424 what does that mean pleaseee respond
bad gpu
Can pick up the Xbox
I been looking up how to get the red ring of death so my mom gets me a Xbox one
what xbox 360 is it?
@@chazzastech Xbox 360 e same one in 5he video
red try stopping the fans too with cotton buds
How to check with the Xbox
Now am getting 4,4,3,1 what dose that mean
Faulty RAM brick/ Shorted out resistor
0033 any help?
it is a southbridge issue i guess.
I got 0020 what does that mean?
dead cpu
I have this Xbox 360 like this mine just only caused a ventilation error because of overusing or overheating
then you're lucky, that's on of the rarest x360 errors
Can you tell me what mine is 0020
dead cpu
@@sthetixofficial Bridged solderjoint/Short - CPU/GPU/RAM
4423?
All error
Okay but what is 4431 mean?
southbridge i guess
How did this happened and how do i fix it
well mostly because of rgh.. and we must replace the xcgpu
@@sthetixofficial whats rgh
modchipped
@@sthetixofficial oh ok thx
If the light on 1 times is 1?
+DArK viXxO yes 1
thx bro!
How to do is fix
my result was 0130
btw the flashes were 4134
SEND HELP AND WHAT IT MEAN!
(edit: and what it mean)
its something not usual.. i dont know the solution. google that code
ah ok thx
My 360e flash’s it red ring o’ death
XBOX you too and thank so up to you if you want the Xbox
I have a xbox 360 slim and the error code was 4244. Anyone know what this is?
mostly bad cpu..
sthetix do you think I could still fix it? Even if I do the tin foil trick?
maybe u need to replace the gpu
sthetix okay thanks Ill try other things
sthetix wait is 4 lights 0? In that case it would be 0020
1st=4
2nd=4
3rd=3
Any help for this?
4th=3
bad southbridge
0033 HOW TO FIX ? 🙏
maybe the southbridge is busted.
Mine flashes 4 times what dose that mean is my system dead or is it an easy fix
u need to know the error code
@@sthetixofficial Mines 0020, is that bad? I've just took it out of my loft after four years of not using it and I was greeted with 0020
dead gpu
Error code 0303 what does it mean....
i dont know
MFG-Mode: Gateway IP not found
🙀 what happened to the Xbox
What’s 4422??
0022 usually gpu error
What 0022 means?
probably cpu gpu
@@sthetixofficial what do I do?
nothing you can do
@@sthetixofficial how sad
What does 0010 means?
usually bad cpu
@@sthetixofficial Cold solder joint under Southbridge
When I do this it gives me 1433
mostly bad gpu
@@sthetixofficial Nope
0101 what does this mean
gpu died
Help what is 4423
replace the southbridge
Oh no what happened to the Xbox
What happened to the Xbox one and PS4 and Xbox one and PS4 and Xbox one and PS4 and Xbox one for you to check out the to the to the gym 💪💪
0 is...
What if it's 4144
0100, gpu died
Help 🥺 0202 error please !
usually bad gpu or cpu
Maaf gan punya saya code 1101 knp ya
cpu mati gan
@@sthetixofficialklo di ganti cpu apa bakal aman jangka panjang min?
gak akan.. mending beli lg xbox nya
what does 4431 mean
Yes I will be there at tsaka
4442?
power problem
Cold solderjoint under CPU
What’s 0101?
mostly dead gpu
capacitor error Xbox 360
I Love The Music
1433?
there is no 1433.
@@sthetixofficial I searched it and it said it was a harddrive problem
Previously
What does it mean when I have 0100
Cold solder joint - GPU
In the to the Xbox
1st 4
2nd 4
3rd 4
4th 2
What's is this ?
0002, i think there is something wrong with the gpu
@@sthetixofficial thanks for help
@@sthetixofficial Cold solderjoint under CPU
Error code 79
I read it is a harddrive error.
Mmm... Ahh how to check on Xbox
I got 0023
southbridge error
Press...