I had a wobble on a vfc Andy mcnabb ltd edition that came into me and to be fair although it looked lovely on the outside it was total crap inside. Good bit of 80s rock in the background.
Agreed on the VFC selectors. The one on my MCX feels like it has Parkinsons. EDIT: also feels like the audio is balanced very well in the video, don't know if thats intentional or not but its way easier to hear you talking
The one on my vfc hk416 only recently became slightly loose. Still clicks and locks into place fine. The gun is almost 4 years old. Considering the gun is stil stock it is still impressive
I took apart my ares amoeba “pistol” after watching this and found out my motor connections were absolutely fucked, and soldered it. Now my full auto works!
I have the VFC Avalon Leopard. My first ever "real" AEG, other than those all-in-one cheap china AEGs as a kid. My only gripe is the right side selector being precisely as in the video. I took it off.
Love your videos and funny attitude, as soon as this video started all i could think of is agree, as my VFC Scar-L ambi selector is as loose and 2 dollar hooker.
Yea, I have a VFC Avalon Calibur too, and the wobble on the right fire selector annoyed me that much, that i just kicked it out and closed the hole. So not amby fire selector on mine anymore, but i don't care. I have Lambda 6.01 stainless steel barrels in all my guns, and it's true, the window is kinda sharp out of the box, But well i smoothed it out and it works just great together with Maple-Leaf, Slong and Trusight rubbers, at least in my builds.
The barrels are nice, and have a good polish , but well, so just smooth some edges is not that big of a deal, at least not when the performance is good. What's the case for my three guns. I like the Lambda barrels quite a bit.
Not enough meat to drill out and re-tap the sheared bolt in the GB? How would you go about it if there was no extended motor grip? Just scrap the GB shell?
So my Specna Arms gearbox has a few hundred thousand rounds through it so I've been thinking of getting the VFC Avalon drop in replacement since the metal Specna Arms body's are very close to the VFC body's... Do you recommend this gearbox or should I just go pay a tech to go through my Orion gearbox? Was also gonna get a ASG Infinity 30k if I got the VFC gearbox?
@@NegativeAirsoftTech is there a drop in gearbox that you'd recommend? If not can you maybe make a video on how to shim for dummys? I've tried watching videos on RUclips but they over explain it and I get lost, I know you can shim a gearbox really quick
Should I cancel my order for an avalon mk18 and get a specna arms core instead? At least the mk18 doesnt have any ambi fuckery, but still feeling like the specna is just a better built machine for a better price.
I have a Specna Arms Edge and have had it for a while, I actually pre-ordered it from Evike so almost had it for a year now and I play indoor every Saturday and Sunday and occasionally Fridays and I've put a lot of rounds through it and it hasn't had a single issue... The bucking isn't great but the hop up likes Promy Purples my fps went from 375ish to 390ish just by installing it and the gearbox seems to like low discharge 11.1's like the Elite Force ones or the Titan ones
@@NegativeAirsoftTech I don't believe everything I hear I do research and ask people that obviously know what they are talking about like yourself... Like the Avalon gearbox, I've heard they're great but I'd rather ask you your opinion since you make a living working on these guns
@@NegativeAirsoftTech what's your thought on HPA, I've thought about getting a Reaper Gen 2, I loved my Inferno Gen2 in my G&G top tech body but I only played twice with it and my car was broke into and it was stolen
Hey @negative airsoft I have the vfc vr16 stinger ii I had a problem with it awhile back had it sent to a local shop to be fixed (for presumably a locked up gear box) anyways they fixed the gearbox but when I got it back it didn't feed bbs any idea how I might be able to fix it or what you might think the problem is ? I'm not a tech and have zero knowledge but am willing to learn
the avalon I bought (just to find out what all the hype was a about) was a piece of utter junk out of the box. first thing that happened- no mods whatsoever- the bevel gear literally shattered into pieces. fixed that- replaced the bevel gear - reshimmed, and removing that shit auto shim. next thing to happen on fielding- the ball bearing bushings exploded into the gearbox causing damage to the sector gear, and spur gear, and piston. replaced the entire gear train. next thing- the shit tappet plate was made of POM and snapped in 2. I said screw it, I just gutted the entire gearbox and replaced every stock component - even the cylinder. Keep in mind I said when I got the gun there were no mods whatsoever. What a POS. No more VFC products for me.
lol i just got one of these used and i noticed the fuse was blown so i put in a new fuse and when i plugged in the battery it just fires by itself. the weird part is i opened the gearbox and the trigger contacts aren't touching so how the actual f is it firing by itself?
You can put a crazy jet in it with a 60 or 70 degree ML hotshot and omega nub. Those rubbers will allow you to use the crazy jet barrel in AEG's or you can just use the stock barrel with a ML macaron and omega nub. I've had great success with both setups.
Yup, I always advise sticking to as many oem parts as possible , a steel hammer & sear is a solid idea if budget permits but I leave most other parts standard. I don't use npas, I modify the gun to be sensible instead.
Negative Airsoft do you have any experience with the Marui zet system gbbr m4's? Any part you would actually recommend to switch out for top gas usage?
Is there a brand out there that stands out to you as one that has the fewest issues? I've noticed you seem to be critical of a lot of what comes through your shop. Not that it's bad, but i'm just wondering what shows up that actually impresses you.
I don't have a shop ;-) I mainly see broken guns so I get to witness first hand the most common faults. So Gate titans in tm recoils causing problems, rhops jamming guns or failing to hop properly, nuprol aegs with semi auto faults, everything in Ares guns... Out the the box, unmodified, best guns (for what you get vs. what you're paying) : TM non recoil SPECNA arms, Cyma, g&p, jg, a&k, s&t (to an extent)... If the brand sounds like an independent music shop or artisan coffee shop, it's normally wank.
Sorbo isn't a strong material, better to use rubber. I've always used rubber for correcting AOE and haven't had a single GB shell crack or stripped a single piston outside of obvious PME or other issues.
you shitting on lambda barrels ? probably the best that you can get after a edgi/pdi barrel .. i mean if the hop window is too sharp well sand it down.
NAS I've watched probably nearly all of your videos now and quite a lot of them are VFC avilons or VFC 416 and by your opinions seem to be absolute dog water and no doubt I would agree but a) why do you get sent so many (probs cos they're broken) and b) why do people keep buying them?? Please tell me
i liked and subbed because my selector is wobbly
I had a wobble on a vfc Andy mcnabb ltd edition that came into me and to be fair although it looked lovely on the outside it was total crap inside. Good bit of 80s rock in the background.
Agreed on the VFC selectors. The one on my MCX feels like it has Parkinsons.
EDIT: also feels like the audio is balanced very well in the video, don't know if thats intentional or not but its way easier to hear you talking
I did nothing differently... It's just RUclips I think.
It literally hanging or standing a Samsung S9 near the work...
Lol
@@NegativeAirsoftTech could possibly just be the choice of music (the individual track etc)
@@AlexLintonUK nah, because I adjust the volume of each track I use... I think it's just random.
The one on my vfc hk416 only recently became slightly loose. Still clicks and locks into place fine. The gun is almost 4 years old. Considering the gun is stil stock it is still impressive
I took apart my ares amoeba “pistol” after watching this and found out my motor connections were absolutely fucked, and soldered it. Now my full auto works!
Selector wobbles on my 416a5. Was able to lessen it by tightening the screw but tighten it too much and it won't turn easily... Like tuning a guitar.
I have the VFC Avalon Leopard. My first ever "real" AEG, other than those all-in-one cheap china AEGs as a kid. My only gripe is the right side selector being precisely as in the video. I took it off.
Love your videos and funny attitude, as soon as this video started all i could think of is agree, as my VFC Scar-L ambi selector is as loose and 2 dollar hooker.
Yea, I have a VFC Avalon Calibur too, and the wobble on the right fire selector annoyed me that much, that i just kicked it out and closed the hole. So not amby fire selector on mine anymore, but i don't care. I have Lambda 6.01 stainless steel barrels in all my guns, and it's true, the window is kinda sharp out of the box, But well i smoothed it out and it works just great together with Maple-Leaf, Slong and Trusight rubbers, at least in my builds.
The lambada barrel I had in a vsr recently was sweet.
The barrels are nice, and have a good polish , but well, so just smooth some edges is not that big of a deal, at least not when the performance is good. What's the case for my three guns. I like the Lambda barrels quite a bit.
@@bronkobrumby776 ...they just chew more rubber than a safe sex hooker... ;-)
heyy.. i bought a new EG 30K HC MOTOR TOKYO MARUI ..do you think is better to install it in my VFC AVALON CALIBUR gun than the stock one ?
Not enough meat to drill out and re-tap the sheared bolt in the GB? How would you go about it if there was no extended motor grip? Just scrap the GB shell?
Nope, I'd use common sense & do that shit you just saw.
Cool huh?
There's always a solution, depends on the situation.
Liked and subbed. Now, how do I fix that wobble on the selector? Got the Samurai edge
Selector on my Leopard is wobbly as well
what kind of mlok hand guard is that?
Great videos, do you have a opinion on the wolverine MTW, thanks
Haven’t had any issues with my lambeda barrel pretty good price to peformance
Yup, I think it's VFC hop unit + Lambada barrel = shredder time
So my Specna Arms gearbox has a few hundred thousand rounds through it so I've been thinking of getting the VFC Avalon drop in replacement since the metal Specna Arms body's are very close to the VFC body's... Do you recommend this gearbox or should I just go pay a tech to go through my Orion gearbox? Was also gonna get a ASG Infinity 30k if I got the VFC gearbox?
Just no.
@@NegativeAirsoftTech is there a drop in gearbox that you'd recommend? If not can you maybe make a video on how to shim for dummys? I've tried watching videos on RUclips but they over explain it and I get lost, I know you can shim a gearbox really quick
Should I cancel my order for an avalon mk18 and get a specna arms core instead? At least the mk18 doesnt have any ambi fuckery, but still feeling like the specna is just a better built machine for a better price.
Its certainly a better gun...
I have a Specna Arms Edge and have had it for a while, I actually pre-ordered it from Evike so almost had it for a year now and I play indoor every Saturday and Sunday and occasionally Fridays and I've put a lot of rounds through it and it hasn't had a single issue... The bucking isn't great but the hop up likes Promy Purples my fps went from 375ish to 390ish just by installing it and the gearbox seems to like low discharge 11.1's like the Elite Force ones or the Titan ones
@@isaacshively6705 all of this is good, sensible & accurate info.
Why are you in the internet?
Don't you know this is where the cunts live?
@@NegativeAirsoftTech I don't believe everything I hear I do research and ask people that obviously know what they are talking about like yourself... Like the Avalon gearbox, I've heard they're great but I'd rather ask you your opinion since you make a living working on these guns
@@NegativeAirsoftTech what's your thought on HPA, I've thought about getting a Reaper Gen 2, I loved my Inferno Gen2 in my G&G top tech body but I only played twice with it and my car was broke into and it was stolen
Hey @negative airsoft I have the vfc vr16 stinger ii I had a problem with it awhile back had it sent to a local shop to be fixed (for presumably a locked up gear box) anyways they fixed the gearbox but when I got it back it didn't feed bbs any idea how I might be able to fix it or what you might think the problem is ? I'm not a tech and have zero knowledge but am willing to learn
I should also add it will feed a random bb here and there
the avalon I bought (just to find out what all the hype was a about) was a piece of utter junk out of the box. first thing that happened- no mods whatsoever- the bevel gear literally shattered into pieces. fixed that- replaced the bevel gear - reshimmed, and removing that shit auto shim. next thing to happen on fielding- the ball bearing bushings exploded into the gearbox causing damage to the sector gear, and spur gear, and piston. replaced the entire gear train. next thing- the shit tappet plate was made of POM and snapped in 2. I said screw it, I just gutted the entire gearbox and replaced every stock component - even the cylinder. Keep in mind I said when I got the gun there were no mods whatsoever. What a POS. No more VFC products for me.
lol i just got one of these used and i noticed the fuse was blown so i put in a new fuse and when i plugged in the battery it just fires by itself. the weird part is i opened the gearbox and the trigger contacts aren't touching so how the actual f is it firing by itself?
Mike same shit happened to mine, the mosfet was fried in mine, my dumb ass plugged a battery in backwards and fried it
put a gate aster in
ya it was the mosfet, i just took the mosfet off and wired it up straight to the trigger switch.
Agreed on the selector problem. What the hell, brand new gun and selector is, well, shit. Out od the god damn box.
selector wobbles on mine
If there’s one thing ares does right it’s their selectors, at least on mine
is there any way to have decent accurate without hop-up????
Do Anh yes i like to throw the bbs at people it is very accurate
@@thomassigman6933 really? cool, can u throw bbs accurately at people from 20 meters away
You can put a crazy jet in it with a 60 or 70 degree ML hotshot and omega nub. Those rubbers will allow you to use the crazy jet barrel in AEG's or you can just use the stock barrel with a ML macaron and omega nub. I've had great success with both setups.
What brands do you recommend for fire selectors, mag release etc?
I like retro arms for aftermarket peripherals
Do you ever get GBBR maintenance or upgrade jobs?
Yup, I always advise sticking to as many oem parts as possible , a steel hammer & sear is a solid idea if budget permits but I leave most other parts standard.
I don't use npas, I modify the gun to be sensible instead.
Negative Airsoft do you have any experience with the Marui zet system gbbr m4's? Any part you would actually recommend to switch out for top gas usage?
Is there a brand out there that stands out to you as one that has the fewest issues? I've noticed you seem to be critical of a lot of what comes through your shop. Not that it's bad, but i'm just wondering what shows up that actually impresses you.
I don't have a shop ;-)
I mainly see broken guns so I get to witness first hand the most common faults.
So Gate titans in tm recoils causing problems, rhops jamming guns or failing to hop properly, nuprol aegs with semi auto faults, everything in Ares guns...
Out the the box, unmodified, best guns (for what you get vs. what you're paying) : TM non recoil SPECNA arms, Cyma, g&p, jg, a&k, s&t (to an extent)...
If the brand sounds like an independent music shop or artisan coffee shop, it's normally wank.
@@NegativeAirsoftTech Thanks for the insight, sir. Just found your channel a week or so ago and I enjoy the content.
specna arms/E&C AEGs, vfc GBB pistols, tokyo marui anything.
@@NegativeAirsoftTech "If the brand sounds like an independent music shop or artisan coffee shop, it's normally wank." This guy tells the truth.
cool song
Why don't you like sorbo pads? Are you a rubber washer guy? If I'm doing it wrong please lmk how to do it right lol
Love da videos
Sorbo isn't a strong material, better to use rubber. I've always used rubber for correcting AOE and haven't had a single GB shell crack or stripped a single piston outside of obvious PME or other issues.
you shitting on lambda barrels ? probably the best that you can get after a edgi/pdi barrel .. i mean if the hop window is too sharp well sand it down.
Mine wobbles like shit as well
I cant seem to find your Facebook. What is it?
Which country are you in?
People in the states can't see it
@@NegativeAirsoftTech Oh that would explain it. I'm in the US.
NAS I've watched probably nearly all of your videos now and quite a lot of them are VFC avilons or VFC 416 and by your opinions seem to be absolute dog water and no doubt I would agree but a) why do you get sent so many (probs cos they're broken) and b) why do people keep buying them?? Please tell me
That is why i dont like ambidextrous features. Less is better
Please tell me how to get the dammm lol orange cone tip off