Did you try pushing right side Mag release button all the way in and rotating left arm off , install until there's no clearance to turn further (lined up) and release button and done.?
Thanks for the video it helped me a lot, how’d you go about removing the barrel nut to change the rail system? Also what was your method to remove the orange tip? Edit: didn’t realize there was a mk18 variant of the Avalon so I guess this might be it
@@262newchannel i put mine in boiling water, somewhat worked then i used a heatgun and held it up to where the threads would be, removed the pin then put a cloth around the muzzle the twisted it with a long wrench because itis easier with the more leverage you have. slapped a bifrost on it.
Its called a sector gear delay chip it wasnt broken it just simply fell off the sector gear too easily. Best solution is to get a new one that fits tighter
lol i just got one of these used and i noticed the fuse was blown so i put in a new fuse and when i plugged in the battery it just fires by itself. the weird part is i opened the gearbox and the trigger contacts aren't touching so how the actual f is it firing by itself?
its possible your mosfet my be faulty.. because techically it is plugged into the motor and the trigger contacts only send a signal. so if the mosfet has a problem it would shoot without the trigger contacts moving. make sense?
@@facelessduo3364 the problem I'm having is the normal side selector gear is rubbing on the selector player between safe and semi causing a very unpleasant switch
The motor is a 22 tpa im pretty sure Its good for 12:1 I changed mine to a 16tpa becuase i liked shs at the time and didnt know motor ratios. The higher the motor tpa you want lower gear ratio 12:1 and a 28tpa is a good combo
This is why you keep those Allen wrench sets together in their holder/case lol
Did you try pushing right side Mag release button all the way in and rotating left arm off , install until there's no clearance to turn further (lined up) and release button and done.?
Yeah it was still insanely tricky
Just ordered saber cqb gen2. Thank you
glad i could help
Thanks for the video it helped me a lot, how’d you go about removing the barrel nut to change the rail system? Also what was your method to remove the orange tip? Edit: didn’t realize there was a mk18 variant of the Avalon so I guess this might be it
sorry just saw this. i recieved this avalon with the mk18 rail attatched and its the daniel defense.
@@facelessduo3364 No worries man! I figured out a how to change the rail system
@@262newchannel If you don't mind me asking, how'd you do that?
@@262newchannel i put mine in boiling water, somewhat worked then i used a heatgun and held it up to where the threads would be, removed the pin then put a cloth around the muzzle the twisted it with a long wrench because itis easier with the more leverage you have. slapped a bifrost on it.
What is the broken piece in the gun i got the same issu
Its called a sector gear delay chip it wasnt broken it just simply fell off the sector gear too easily. Best solution is to get a new one that fits tighter
lol i just got one of these used and i noticed the fuse was blown so i put in a new fuse and when i plugged in the battery it just fires by itself. the weird part is i opened the gearbox and the trigger contacts aren't touching so how the actual f is it firing by itself?
its possible your mosfet my be faulty.. because techically it is plugged into the motor and the trigger contacts only send a signal. so if the mosfet has a problem it would shoot without the trigger contacts moving. make sense?
@@facelessduo3364 ya thats what i thought, i just took the whole mosfet out and the back side looks burnt! now im pretty sure its a bad mosfet.
I am trying to rebuild one for a freind and just cant get the ambit selector switch to work
It took me a while to figure it out but i do have an assembly video.
@@facelessduo3364 the problem I'm having is the normal side selector gear is rubbing on the selector player between safe and semi causing a very unpleasant switch
Does the selector switch for lefties wobbles when you are in full auto?
it wobbles a bit
How is the effective range of your gun?
what optic is that one? thanks!
A elcan spectre 1x-4x
Never saw the cleaning or reassembly videos.... what happened?
uploaded a reassembley video. u have to check my channel.
to be completley honest the insides were clean.
How did you get the ris 2 rail on that I’m having problems with it
my mk18 rail? it was a night mare i can make a video of how to do it.
Yessssss!
@@facelessduo3364 Please do, I thought it's not possible
What motor does it come with? Does it need to be upgraded if you make a high speed/ high trigger response/ high rps...etc build?
Also whats the diff between the gen 1 and gen 2
The motor is a 22 tpa im pretty sure
Its good for 12:1
I changed mine to a 16tpa becuase i liked shs at the time and didnt know motor ratios.
The higher the motor tpa you want lower gear ratio
12:1 and a 28tpa is a good combo
Gen 2 has qrs furniture and a better mosfet
@@facelessduo3364 so will i be fine putting in 13:1 gears with the stock motor?
@@ihavenoiqq yes sir
nice build!
thank you it looks much different now. i will upload a new video soon.
good job not filming for the first few minutes of disassembly...dork...
You should know the basics…dork…