Got my Samurai Edge 3 days ago, it just did that double fire thing this morning. Edit: Stripped it down and cleaned the loose grease out. The two circuit boards seemed loose from each other. Pressed them together better and now it works fine again. If it goes wrong again, I think it’ll need a spacer to pack out the gap between the gearbox casing and the circuit boards to keep them firm
I got one and had a similar repeating on semi fault. After firing it'd beep twice to indicate a potential gear or gear sensor issue. Sent it back and currently the retailer is suspecting a "bad batch of ETUs"... We'll see, hopefully it'll work when they replace it, otherwise I guess I'll install a WARFET 😕
ICS is dropping a new MP5K some time this year and k hope it's a split V2 gearbox they are so easy to work on or figure out what's wrong... And all the ICS guns I've had the gears were shimmed perfectly
Hey just wondering what part you would recommend for making an high end airsoft assault rifle build - range accuracy- decent rof (nothing crazy lol). With 400fps
Elite force cfr has the ecfs in it now. a high torque motor and m130 spring with one piece metal hop up and tight bore barrel . Cost me like $300 only but I'm about t o spend another like fifty on a mosfet cu s i got mine last year and it doesn't have a mosfet out the box like the new ones
You probably dont give a shit but if you guys are bored like me during the covid times you can watch pretty much all the new movies on instaflixxer. Been watching with my girlfriend for the last couple of days :)
I have the same Avalon and i can't take out the inner barrel. I can't change the rubber, It's very frustrating. Is there a y trick? Thanks for your vídeos.
To add I was on the verge of buying the vfc avalon. Mainly because I'm new to the sport and i wanted something good out of the box. With watching your videos I'm not convinced it's for me now.
@@opairsoft8100 the gears in the newer VFC stuff are a lot better, but the internals generally speaking are like cheese & the overall quality of the internals in vfc aegs are wank at best.
Anything you would recommend. Just needs to be reliable really and shoot reasonably accurately. I don't want to tamper with it I can always buy a used m4 or similar to start playing around.
@@opairsoft8100 I disagree, Cyma isn't cheese - it's brutal tough. The most common guns to strip their internals & play up currently are VFC, Ares & Nuprol, the guns with the most trigger faults are VFC, G&G & guns with Gate Titans installed. Sales wise, Specna Specna Arms & G&G are ruling the roost, so percentage wise (sales to fucked guns I see) VFC & Ares are right up there at the top - these are facts.
Hey man, just found your channel, watched 3 video's and love the honesty! May I ask what you think about the Jefftron Leviathan. Its €100,- (around €20,- more then the warfet). I am currently building a DMR from my ICS APE R, and got my upper gearbox done with great conisisentcy in fps and groupings etc. Before increasing the power here in the Netherlands you need to lock it to semi auto with 1,25 seconds delay to forfill the DMR role with 430fps / 1.7 Joules with 0.30. Because of the delay requirement I can't go with the warfet. Thats why I ask you if the Jefftron Leviathan is good as I heard great things about it as It doesn't have a optical sensor like the Perun and the gate titan to read the cycles. Keep up the good work, and looking forward to the upcomming video's! going to watch the older ones soon ;-)
It's another over hyped, over engineered piece of new age shit delicately placed in an aeg very gently in strile conditions that can't stand up to minimal normal useage.
@@NegativeAirsoftTech Well, there's the problem. There's a reason MOSFETs are left to electrical engineers. Though from my experience with electrical engineering I already don't understand what the fuck they're doing with light and shit on a Titan.
I was planning to buy a Samurai Edge. Owners of this rifle, are you guys having problems with the Virgo system as seen in this video? Is the red coloring from the trigger causing the sensor problems? By the way, how is the stock Maple Leaf Inner Barrel that comes with the rifle? Thanks.
Everybody wants a maple leaf barrel until it's standard then they take it out. It's why the new hop unit is so tight on other barrels & rubbers. I've taken 3 more of these shit mosfets out in the last few weeks & one customer took his gun back to a shop & got a refund because the mosfet failed...
For up to 350fps I go with maple leaf & omega nub, I found flat hops wear out slightly faster & why they're more expensive for a simpler design I'll never know... Oh! Because people make money out of fads! I forgot! But they work fine... ;-)
Rob Evans most MP5s come with a three lug and 14mm threads. Not an adapter it seems. Only cheap nasty ones don’t come with the two suppressor mounting options
I just bought a VFC Avalon Gladius. I believe it has the slightly older V2 gearbox so it'll be slightly easier to change the mosfet but unfortunately its still nestled inside the back of the gearbox so I'll probably have to get a tech to change it out. It hasn't arrived yet so I havent had a chance to use it but I hope it doesnt behave like this right from the start haha. Oh well, it's a fantastic gun, just needs a better mosfet.
@@The.JZA. you're about to be very upset. Say goodbye to your gears, piston & mosfet! These are my my most requested repair, I have one on my bench right now.
@@NegativeAirsoftTech If it's broken out of the box, I'll send it back. As for parts breaking down the line, well I'll just have to upgrade. Some of the biggest Airsoft reviewers on RUclips say either the Avalon series or the HK416 is their favourite gun so I'm sure it's not as bad as you make it out to be. And hey, if it sucks and I get a lemon, so be it. It's not the end of the world.
Ghostwalker Airsoft Tech, oh mine has had a similar problem. 3 round burst off and on when the fire selector is on semi. It happens either when you don't pull the trigger with a definite squeeze or just random. Glad I am not the only one who has experienced this.
Fucking hate internal mosfets... My CA had one, and fuck me. The wiring was shot from the get go (shorting on the gearbox case - looks like the motor stripped the wire). In the end, the fet went and shat itself... Since I couldn't find a replacement - thanks CA... I had to get a new trigger switch (which didn't fit the original gearbox), no cut off lever or safety lever since it was combined with an etu. Its got to the point, I said fuck it and just kept the motor and the externals of the thing. Fuck internal mosfets, they can burn in hell (Mine did - I threw it on a bonfire.)
Why everyone say this the best M4 then this vid I just want the best gun out the box I’m new to air soft and just want the best out the box fun and no worries.
Got my Samurai Edge 3 days ago, it just did that double fire thing this morning.
Edit: Stripped it down and cleaned the loose grease out. The two circuit boards seemed loose from each other. Pressed them together better and now it works fine again. If it goes wrong again, I think it’ll need a spacer to pack out the gap between the gearbox casing and the circuit boards to keep them firm
Is it all ok now?
Yep, played 6 day games, no problems
I got one and had a similar repeating on semi fault. After firing it'd beep twice to indicate a potential gear or gear sensor issue. Sent it back and currently the retailer is suspecting a "bad batch of ETUs"... We'll see, hopefully it'll work when they replace it, otherwise I guess I'll install a WARFET 😕
YESSS I’ve been looking for a samurai edge video for sooooo long !!!
Dude the Golden Axe theme music 👍🏾
Your luck nuprol will "make" a kettle
Golden axe music..... Well it's sped up but it's the same haha.
It's a remix
@@NegativeAirsoftTech brought back memories is all ha
Retro gaming at its finest!
@@gambitcustomairsoft8650 I knew you would be around here somewhere
@@Sandywat but of course!
@Negative Airsoft Only me rocking out to the "golden axe" music?......ok then 🤘
golden axe music? winner winner!
ICS is dropping a new MP5K some time this year and k hope it's a split V2 gearbox they are so easy to work on or figure out what's wrong... And all the ICS guns I've had the gears were shimmed perfectly
MP5K from ICS?!
@@hakont.4960 Yes sir!
@@isaacshively6705 Hmm, very interesting, couldn't find anything when googling it though.
5:27 Can you please explain what you are accomplishing here by filing down the spring guide anchor?? Really genuinely curios.
Deans in & out
@@NegativeAirsoftTech lol what. The wiring reaches past the tube, so Im still not understanding the point, unless its just to bill more time.
@@alextatkin1026 must be that then...
Hey just wondering what part you would recommend for making an high end airsoft assault rifle build - range accuracy- decent rof (nothing crazy lol). With 400fps
Thanks
Elite force cfr has the ecfs in it now. a high torque motor and m130 spring with one piece metal hop up and tight bore barrel . Cost me like $300 only but I'm about t o spend another like fifty on a mosfet cu s i got mine last year and it doesn't have a mosfet out the box like the new ones
You probably dont give a shit but if you guys are bored like me during the covid times you can watch pretty much all the new movies on instaflixxer. Been watching with my girlfriend for the last couple of days :)
@Joshua Hayden Definitely, been using instaflixxer for months myself :)
I have the same Avalon and i can't take out the inner barrel. I can't change the rubber, It's very frustrating. Is there a y trick? Thanks for your vídeos.
To add I was on the verge of buying the vfc avalon. Mainly because I'm new to the sport and i wanted something good out of the box. With watching your videos I'm not convinced it's for me now.
Michael Dodd they aren’t bad guns. This one was one of the newer one that has advanced mosfet that hasn’t really been tested much by the community
@@opairsoft8100 the gears in the newer VFC stuff are a lot better, but the internals generally speaking are like cheese & the overall quality of the internals in vfc aegs are wank at best.
Negative Airsoft but that’s like most guns at this point. Stuff that’s cheese and stuff that isn’t cheese.
Anything you would recommend. Just needs to be reliable really and shoot reasonably accurately. I don't want to tamper with it I can always buy a used m4 or similar to start playing around.
@@opairsoft8100 I disagree, Cyma isn't cheese - it's brutal tough.
The most common guns to strip their internals & play up currently are VFC, Ares & Nuprol, the guns with the most trigger faults are VFC, G&G & guns with Gate Titans installed.
Sales wise, Specna Specna Arms & G&G are ruling the roost, so percentage wise (sales to fucked guns I see) VFC & Ares are right up there at the top - these are facts.
Did you ever get your kettle , is that for coffee or tea , I’m from across the pond as you call it
Hey man, just found your channel, watched 3 video's and love the honesty!
May I ask what you think about the Jefftron Leviathan. Its €100,- (around €20,- more then the warfet). I am currently building a DMR from my ICS APE R, and got my upper gearbox done with great conisisentcy in fps and groupings etc.
Before increasing the power here in the Netherlands you need to lock it to semi auto with 1,25 seconds delay to forfill the DMR role with 430fps / 1.7 Joules with 0.30.
Because of the delay requirement I can't go with the warfet. Thats why I ask you if the Jefftron Leviathan is good as I heard great things about it as It doesn't have a optical sensor like the Perun and the gate titan to read the cycles.
Keep up the good work, and looking forward to the upcomming video's! going to watch the older ones soon ;-)
Got a VFC straight out of the box on a 7.4 lipo it was either shooting 2 rounds on semi or the gears would lock and I wasnt feathering the trigger
Love the music as always🏅🪓
Thnaks for being honest
Good build there well done
Im a bit late to the party, but how the hell do you get the buffer tube off the receiver??
What parts did you use in the VFC avalon?
I would love to see your take on a ptw!
How do i get the orange tip off friend?
Why does a mosfet need sensors, exactly?..
Do you know how to remove outer barrel
What was wrong with the mosfet exactly? I'm a little new to airsoft, and very interested in the inner workings.
It's another over hyped, over engineered piece of new age shit delicately placed in an aeg very gently in strile conditions that can't stand up to minimal normal useage.
@@NegativeAirsoftTech I assume it's a Titan Gate? I noticed you hate those.
@@justinvzu01 nope
A random thing they made
@@NegativeAirsoftTech Well, there's the problem. There's a reason MOSFETs are left to electrical engineers. Though from my experience with electrical engineering I already don't understand what the fuck they're doing with light and shit on a Titan.
Where did you get the threaded tip for the ICS MP5? Ive been after one for ages and I can only find CYMA ones.
Dear god my FAMAS is gonna
make you really swear then
I was planning to buy a Samurai Edge. Owners of this rifle, are you guys having problems with the Virgo system as seen in this video? Is the red coloring from the trigger causing the sensor problems? By the way, how is the stock Maple Leaf Inner Barrel that comes with the rifle? Thanks.
Everybody wants a maple leaf barrel until it's standard then they take it out.
It's why the new hop unit is so tight on other barrels & rubbers.
I've taken 3 more of these shit mosfets out in the last few weeks & one customer took his gun back to a shop & got a refund because the mosfet failed...
I had no problems so far
Question....Did you ever get that kettle?
Yes
What do you think about the Prometheus flat hop up tensioners? Haven’t heard anything bad but im not sure about getting one
For up to 350fps I go with maple leaf & omega nub, I found flat hops wear out slightly faster & why they're more expensive for a simpler design I'll never know...
Oh! Because people make money out of fads! I forgot!
But they work fine... ;-)
Where did you get the threaded muzzle adapter for the mp5?
Rob Evans most MP5s come with a three lug and 14mm threads. Not an adapter it seems. Only cheap nasty ones don’t come with the two suppressor mounting options
Use a jefftron that has a physical switch for both the trigger and the cycle and this is not a problem .
I just bought a VFC Avalon Gladius. I believe it has the slightly older V2 gearbox so it'll be slightly easier to change the mosfet but unfortunately its still nestled inside the back of the gearbox so I'll probably have to get a tech to change it out. It hasn't arrived yet so I havent had a chance to use it but I hope it doesnt behave like this right from the start haha. Oh well, it's a fantastic gun, just needs a better mosfet.
If you haven't received it.... how do you know it's fantastic?
@@NegativeAirsoftTech Because I’ve watched about a million reviews haha
@@The.JZA. you're about to be very upset.
Say goodbye to your gears, piston & mosfet!
These are my my most requested repair, I have one on my bench right now.
@@NegativeAirsoftTech If it's broken out of the box, I'll send it back. As for parts breaking down the line, well I'll just have to upgrade. Some of the biggest Airsoft reviewers on RUclips say either the Avalon series or the HK416 is their favourite gun so I'm sure it's not as bad as you make it out to be. And hey, if it sucks and I get a lemon, so be it. It's not the end of the world.
@@The.JZA. Oh! Those guys that get given free guns if they say they're the best? I'm so stupid.... Sorry!
I have a kettle, how do I send it to you lol
Was that a samurai edge avalon ?
Yeah, comes with burst fire & pre-cocking ability via the programmable trigger - which literally changes settings & fails to fire randomly.
how much do you charge for maintenance and upgrades
A kettle
@@NegativeAirsoftTech I can definitely do that I'll get it boxed up now
I unfortunately cant send you a kettle but I did subscribe.
Where are you? Could I send a gun to you? How much would installing gate aster cost? (in the same gun vfc avalon samurai edge)
Message him on Instagram,
could you lover the music a bit please
If I lover it any more, it'll be too love to hear it.
@@NegativeAirsoftTech whoops made a typo, my bad. i love hearing your voice, even though every second word is a swear
avalon...yep exactly what mine did...POS. the mosfet was the problem.
Ghostwalker Airsoft Tech, what was the problem? I own one, I just didn't catch what the problem was.
@@venomairsoft830 fires auto on semi or not at all
The Avalon is a piece of shit
Ghostwalker Airsoft Tech, oh mine has had a similar problem. 3 round burst off and on when the fire selector is on semi. It happens either when you don't pull the trigger with a definite squeeze or just random.
Glad I am not the only one who has experienced this.
@@venomairsoft830 mine was an epic fail out of the box. Ended up gutting the entire gearbox..last vfc product I will ever buy.
Fucking hate internal mosfets...
My CA had one, and fuck me. The wiring was shot from the get go (shorting on the gearbox case - looks like the motor stripped the wire). In the end, the fet went and shat itself...
Since I couldn't find a replacement - thanks CA... I had to get a new trigger switch (which didn't fit the original gearbox), no cut off lever or safety lever since it was combined with an etu.
Its got to the point, I said fuck it and just kept the motor and the externals of the thing.
Fuck internal mosfets, they can burn in hell (Mine did - I threw it on a bonfire.)
𝗙 𝗨 𝗖 𝗞 𝗜 𝗡 𝗚
send me a mp5 and i will send you a coffee 3000 ;)
Why everyone say this the best M4 then this vid I just want the best gun out the box I’m new to air soft and just want the best out the box fun and no worries.
yea i hate the dogshit trigger on my avalon. perun hybrid here i come
First