Saberforge Thread-In Pixel Blade
HTML-код
- Опубликовано: 9 июл 2023
- #starwars #lightsaber #saberforge #graypaladin
Let's look at the pros, cons and my thoughts on Saberforge's thread-in pixel blade that come with all their hero tier neopixel lightsabers. Based on the information presented, you be the judge. Do you like it or no?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
LIKE, SUBSCRIBE and SHARE with your friends. New videos every week!
Email: graypaladin.sabers@gmail.com
Facebook: / gray.paladin.12
Patreon: / graypaladin
A BIG thank you to my supporting patrons:
William Hill
End screen credit to Darth Ravenz Nerd Nest
*This channel is not affiliated or sponsored by any of the companies or products featured in this video at the time of recording.* 
Развлечения
plus it looks like you cant use standard and neopixel blade plugs
Yes! I forgot to mention that in the video. You can't use standard blade plugs and it would almost be pointless to make one because screwing in something so short runs the risk of getting stuck.
Thank you for this excellent review. I'm sure this connector looked good on paper but SF probably has to much invested in it by now to just end it but much like their old "rumble pack" option, I hope this eventually goes away to.
I'll hand it to saberforge, it was a good concept, but not practical in use.
Sabermach introduced the threaded blade system on their standard in hilt blades a few years ago but after I just had a look on their site, the blades are no longer available. And that was just for regular in hilt blades not Neopixel with it's slightly more complex method of connection. I think I mentioned to you the possibility of the 3.5mm jack becoming loose as well over time if repeatedly inserted or detatched.
Now who remembers the famous "Field Containment" spiral blade from SF?
p.s. a good honest review, keep them coming!
You did mention the jack coming loose. I think it is a genuine concern and major flaw.
We all remember that Phallus blade, it was appearently suppoosed to be an "unstable" effect. Now I better the containament blade, that one I liked.
My last Saberforge "scratch-n-dent hilt sale" purchase where they sent you a random hilt where you dont get to choose what you get,... i was soooooooo worried they would send me one with a threaded blade emitter. Luckily i got a Episode1 OB-Wan hilt that was the older "non-threaded" and I was oh so happy.
Good. I'd rather not have it. Not worth it.
@@GrayPaladin agreed
It never occurred to me that your Count Mk II came pre-installed with the thread-in system. Overall it's a novelty concept that really should've been left on the drawing board, for all of the reasons that you mentioned. Indeed, I see no reason for Saberforge to implement such a dubious system, and I think that they did it for the sole purpose of the potentital revenue on blades. Creating a system wherein only THEY can provide replacement blades kinda meshes with some of their marketing tendencies.
As for the LED's rattling inside the blade... eventually that will lead to issues. Every neopixel blade that I own that has had this issue has died on me, and I don't duel. The LED's simply break loose from the connector inside the blade via the vibrations from any use. This is the result of the LED's not being properly secured/padded inside the blade. It's a flaw that cannot be overlooked and should give pause to anyone who might purchase a saber utilizing this system.
I totally agree with you about their marketing tendencies. I believe their main motivation to creating the thread-in system was to increase revenue supplying exclusive blades.
Neopixel blades really need the additional foam inner tube. It aids in illumination, stability and protection. SF clearly cut corners on that, but didn't cut cost to match.
@@GrayPaladin They'd definitely not hesitate due to revenue on the blades. I do however like the fact that these fit more securely. True it might not be needed on all hilts but something with a small emitter section, like their thin-necked redeem type (Kenobi hilt), the blade stays in place way better than just allen screws would do (just got Redemption)
I think besides the fact that no one else seems to sell these (saw one place on Etsy for $75) they're better than standard neopixel blade, & if everyone started selling hilts with emitters for them they would become the new standard of saber blade.
@Necroscat Do you own a Redemption saber from SF? Did you also experience the rattling of the LED-strip?
The standard blade I got from saber forge, is really nice. The leds in side don’t rattle or anything, however the tip of the blade doesn’t light up. I’ve asked them about it, and they’re hey just say that is how they designed them. Do you see that with your blades from them? What shops do you recommend getting blades that have lite up tips?
If it's a neo blade it's important to make sure the blade has a hollow tip and one led is inside the tip. If it's an in hilt led, the blade should have a mirror or some form of reflection at the base of the tip.
I personally prefer Sabertrio blades. I think theirs are really good.
Don’t have one of those was thinking of upgrading my SaberForge Hilts
Avoid these blades.
@@GrayPaladin Good Heads up Man
I got a LGT rebel xeno pixel from saberforge but it came with virtually no instructions on how to put it together. I think it came assembles but I’m not so sure because it did come with a couple screws and hex keys and what not. I was hoping you could help me on telling me on how to put it together since it’s a little frustrating that i just get it and I have to fend for myself lol
I'm not familiar with that saber, but it should be one piece. The bag of screws and Allen wrench comes standard with all LGT sabers. They spare parts and extras in case you change electronic cores and that have a different screw layout.
It allows thin-neck sabers to do pixel blades where it wasn't really possible before. the non-pixel version with the in-blade LED is also a plus for thin-neck sabers. Your complaints are totally valid, but there is a scenario where it's worth the trouble.
Other thin necks utilize stand pcb connectors for pixel blades. Though this is a more durable alternative, I don't think it outweighs the other negatives to make it worth it.
Man, that rattling inside the blade is something I got with a couple of TXQs I recently ordered. Granted I went for cheapos but those are gonna be the blades they put in with their more expensive stuff, and what you'd get if you paid nearly $100 for one. And I'd be really annoyed if I tried these thinking they might be better with a higher price but nope, lol.
I've kinda learned to ignore the feel of it but it's really not good to be selling these like that. At these prices cutting the cost for 1mm of foam or so feels a bit ridiculous.
I agree. When you pay that kind of money for a product, you should get better quality.
I've made a couple neopixel blades myself and they really aren't that difficult. That inner tube of foam is crucial.
@@GrayPaladin Can you add the inner foam to a threaded blade & if you can could you make a video of it?
@@Necroscat I'm pretty sure you could, but I don't want to take apart the blade and run the risk of ruining my only thread-in blade.
Forgot to put how the thread in design is actually brighter than normal neopixel blades.
Maybe that has something to do with the looseness of the pixel strips...
How did you determine it's brighter? The LED strips are industry standard like any other blade. My only thought would be the jack connection vs pogo pins.
@@GrayPaladin I put it next to a couple of different standard neopixel blade that comes with most hilts (have a ton), and the thread in was brighter. Almost as bright as the one I got from 89 Sabers & they have some nice custom blades that weigh less but still feel pretty much as strong (I don't duel though).
Thanks for the review.
Is the normal style of blade discontinued for Hero tier? They're still selling them. So if not for Hero tier, then for old purchases only?
All the hero tier pixel blades come thread in. The old blades are most likely only used for base lit sabers that aren't thin neck.
I believe I read that they're not doing these anymore and are phasing them out for the more industry standard version that everyone else is using thankfully.
That's a good move. Where did you read that? (Send link if possible)
Another minus - no illumination without the blade. Most neopixel hiltside connectors are lit nowadays.
Yes great observation and there's no lit blade plug you can use either.
i prefer the standard. i imagine blade plugs for the threaded ones are rare or non existant and expensive.
Non-existent. I haven't seen one yet.
Appreciate your review. I'm not a fan of screw in blades.
Overall, not very good.