WIRELESS SECURITY AUTODIAL BURGLAR ALARM SYSTEM
HTML-код
- Опубликовано: 15 сен 2024
- Wireless Alarm system adopts the most advanced digital sensing and controlling technologies, it is the intelligent alarm control system containing burglar alarm, fire alarm, fire fighting, gas leakage, anti-theft, anti-burglary/mugging, sudden disease emergency calls, SOS and other function.
Wireless Alarm system uses the most advanced multiple random selection technology,it avoids the problems of interference and alarm missing which usually exist in the similar systems. This system can be used widely in residence,shops,villa,small enterprise and so on.
Thanks for this video because I couldn’t figure it out without your video..😎👍🏾😎
I found this video very helpful. Thanks for taking the time to do it.
Thanks. Still very usefull
thank you, this is my favorite video thank you for the step by step instructions in writing
Thanks.very good tutorial.
great video, but the home zone alarm isn't shown on any of the RUclips vids, do you know how to set this up cause my manual isn't correct - it's says the following... enter setup - 61 Alarm code - then arm ??? is that the fob Alarm or pad Alarm button? then 0/1 but neither change the status nor any confirmation. Any help would be much appreciated.
Super helpful thank you for sharing this!
My PIR sensor keeps arming the host any idea why? It's programmed on 2305#
Bonjour tout le monde. Existe-t-il la version française ?
The power supply is provided for the 12v standard, but what is the admissible voltage range? Can we go up to 14v?
Hi and thanks again for the video. I would like to add a wifi siren. How can I do it?
How do I get it to play music arm? It talks about it in the manual but does not say how to program it. I would like to use that for home arm I had it playing music once but don't know what pushed. The siren is ok for away alarm.
Having a little difficulty programming the GSM alarm for delayed entry. I have a wireless detector coded as zone No. 3, but the commands to make it delay are not working. Do you know what I might be doing wrong?
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice reconding message.
Great help
If I put a single core cable around my bike to alarm it do I just connect both ends into the panel or will I need a resistor to connect to the cable first .kind regards Mike
Je viens de m'apercevoir que nous parlons de la vidéo. Désolé. J'ai suivi exactement instructions et ça fonctionne à merveille
cela te derange si je reviens vers toi si j'ai un problème lors de l'installation c'est pas exactement le meme modele mais ca semble etre les même fonctionnalités .par contre je n'ai pas compris ce qu'est une zone de defense ?
par exemple je met un detecteur infrarouge et une capteur de porte c'est une zone par element ? merci a toi;) difficile de trouver des infos en francais;)
Bonjour cela ne me dérange pas. Mais il est vrai je ne suis pas posé ce genre de gestion j'ai installé détecteurs de mouvements. Mais ouverture de porte de fenêtre. J'ai essayé tout fonctionne. Pour moi cela me suffit.
GILLES ANDRE
Merci c est sympa pr contre tu n as de MP sur ta chaîne?
J ai réussi à trouver une notice en français qui reprend dans les grandes lignes celle que j'ai c'est l'ancien modèle mais c'est le même codage donc ça devrait bien aider ;)
Bonne journée
Bonjour Gilles je suis en train d'installer l'alarme j'ai réussi à coder les différents détecteurs ça c'est pas un problème entre la notice en anglais et la notice en français j'arrive à peu près à me retrouver ;)
Par contre je vais faire un test de sirène j'aimerais savoir comment tu fais pour arrêter la sirène j'ai vu qu'on pouvait temporiser en seconde mais je n'ai pas vu comment à l'aide du panneau central on pouvait arrêter la sirène lorsqu'elle se déclenche merci à toi
Bonjour Gilles je suis en train d'installer l'alarme j'ai réussi à coder les différents détecteurs ça c'est pas un problème entre la notice en anglais et la notice en français j'arrive à peu près à me retrouver ;)
Par contre je vais faire un test de sirène j'aimerais savoir comment tu fais pour arrêter la sirène j'ai vu qu'on pouvait temporiser en seconde mais je n'ai pas vu comment à l'aide du panneau central on pouvait arrêter la sirène lorsqu'elle se déclenche merci à toi
It's not that loud and can you use that for all entrance doors of the house and windows? I have 3 doors. Would it work for a window being broke also?
504Productions i think so and you can purchase extra sirens and strobes
David Myers.
I am having problems on installation of YA-500-GSM-5 .I cannot get the GSM part to operate.Can any body HELP?
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
Hello, doew yhe alarm has home mode, only the windows and the doors contacts works without the PIR motion sentors? If it does how i enable it?
Hello, my alarm does not ask me for the user password when shutting the alarm off at the panel. How do I fix that?
Do this alarm have a chime sound to let you know when someone is coming in and out the door?
No
Can I ask question. What is the name of the App you are using for mobile to disarm if alarming. Thanks
Hi! great video and good system, however do you know how to set up a wireless panic button? I cannot find anything about it anywhere!
Hey there. I have a similar alarm, all looks good, but I don't receive the "Armed/Disarmed" messages. Entering 461# does nothing. Anything to fix that?
My issue too ....it used to send me text when power is off ....and when I enter the room without disarming the gadget.? What do I do?
Hi, i just purchased and indtalled this alarm, it worked ok but now is beeping constantly, the system works regularly but the beep is there in low decibel, i appreciate if you know what the problem is, thankks
can you rename the detectors in this panel ?
What is the name of the App you are using for mobile - ANDROID ?
Any one know how to add a new key fob I have 2 coded but the third won't work any help would be very appreciated
Where can you purchase this system? Also, can you integrate it into VeraPlus and Smartthings?
¿ q hago para configurar un nuevo sensor pir ? AYUDA !
Does anyone manage to pair an external siren ? Can't get the host ti send the pairing signal ...
Nope me neither
doesnt work with battery. Any settings?
can you replace the speaker with a firealarm?
How do you get the iemi number from this alarm. I have this exact model
+Gertzerroz You do not need the IEMI number as this system is GSM only and will not work on old fashioned CDMA bands. A sim card that is the best for your money is H2O wireless. for a sim card through Ebay is under $5 bucks, and for a full year and up to 1,000 messages, is only $100.00 . (The same monitoring from an alarm company is an additional $15.00 per year plus a fee every time your alarm goes off.)
hi I am looking for manual for this system . I have lost it somewhere and now I need to programm another remote control..
Hello, we have manual of it. please contact skype: daping_amy
Daniel Brańka me too i want the manual!! Do you have it ?? If you have it please contact with me in hormbill5@gmail.com
Hy, I have installed one of this alarm and watched your video, could you help me with 2 simple matters ?
Is that from Aldimarket?
If the buttons are not beeping what would be done about it
How do I reset the system thanks
Does someone know how can i reduce the voice of this lady???? I dont want to cut the speakers cables cause from the speaker i can hear also the indoor siren. Anybody please help cause the unit can is outside my baby son door room. :)
Not tried this but it says it works online : [83] + [0/1] + [#] Arm/ Disarm Voice Prompt [0]: off; [1]: on (default) [84] + [0/1] + [#] Voice Prompt for All Settings [0]: off; [1]: on (default) also if you have an extra siren you can use this 750#
I have fitted an external siren/strobe to the outside of my house and tried to connect the control panel to it wirelessly. They seem to communicate as when I disarm the system the external siren bleeps twice. Can anyone please advise me why the SIGNAL LED light on the top right of the control panel blinks continuously, is it supposed to do this? To be honest I'm a bit disappointed with the system - already THREE PIR motion detectors have failed (the LEDs blink rapidly and continually without being triggered, if I turn them off and back on again they continue to blink repeatedly but at a slower rate. I have changed the batteries but it makes no difference. The seller has replaced two of PIRs but now they have failed too. Could they be affected by my TV remote control or wi-fi devices? Any advice would be very welcome.
Thanks Monty Bob, All more or less sorted now. It would seem the batteries were discharging quite quickly. I have now put in 9 volt feeds from the panel to the PIRs to get round that problem. I guess the supplied cheap batteries were pretty much discharged when I bought the system.
Roger B you have to open it up and open the circuit that makes it beep for arm or disarm.
The blinking on the top right is the connection signal telling you your sim is working
do i have to have internet also how do i get minutes on the gsm card
Hi Stephanie, You don't need an internet connection, just access to a mobile phone network. You will need to buy a SIM (gsm) card. I bought one from Tesco (I live in the UK) and put £10 worth of credit on it. That should last a long time as, fortunately, my system has not been triggered, apart from when I test it, so it has not had to use up credit by sending SMS messages to my mobile phone. Hope this helps. Good luck, Roger B
nobody seems to be able to answer if this system requires home internet connection like cable,dsl,fiber,wifi. The only thing I have is my smartphone. I live in a rural area...
mss burr u just need a SIM card. U don't need data or wifi.
rass ot Thanks for the info.
Do you need a home phone line for the system?
it works on mobile GSM, cable line is optional
do you have to pay for a mobile service opposite of you mobile phone?
Very good video, but 46+1# 49 phone number is not working.
how do i reset the alarm bulgarm gsm settings
Do i have to keep the system plugged in?
No, if the system has power in the back up battery, you can use it directly, or you need to plug in to charger power.
If you need this system please contact me skype:daping_amy
dude you are a genius
Bonjour à tous. J'ai l'option avec deux télécommandes supplémentaires. Je n'ai pas trouvé comment les configurer avec mon système d'alarme. Il y a-t-il une personne pour m'aider merci
gilles ,j'ai acheté une alarme similaire chez ali j'avoue que bien que maitrisant pas trop mal l'anglais je suis un peu perdu dans le manuel si tu le désires on pourra s'entraider;)?
ruclips.net/video/V4aDIs2Zu0w/видео.html bonjour. J'ai acheté mon matériel sur Cdiscount. Avantage considérable c'est il y a un service après vente. Le revendeur Français m'a donné ce lien, qui explique vraiment tous les réglages. Maintenant tout fonctionne à merveille. Je te conseille très fortement de voir cette vidéo tu vas tout comprendre bon courage très sincèrement Gilles
Does it require monthly subscription fees to use it?
Only if your using it to dial out it will need a sim card that you have to pay monthly
@@ryecoodr do you need a Sim card for this system to work. I'm trying to find out if you can use it without a Sim card
@@techfly3 you can use it but it won't call out to your phone without the sim card
I'm struggling to get my phone to work with this alarm. I entered every code
Suppose someone comes to steal, the alarm sounds, and switch off the power and remove the battery . So you see it is very simple to do . I guess the siren stops working. It is so?
Diego the alarm is just deterrent plus it would of sent a signal before the breaks it or cuts the power
How can I program the Smoke detector to send an SMS signal when the main alarm is disabled, like a 24 hr. panic?
Smoke Detector zone number should be in Emergency Zone numbers. My system emergency numbers 93-99 ..
I have to choose no 95 for smoke detector for example. .
How do you remove disarm on device screen don't want burglar to disarm at screen
Just lock the host so they cant disarm from the panel without a password
Is it possible locking the keypad with a password? It looks quite easy disarming the device.
first change the user password in setup mode and if you want 3333 for password type 383333#
than to lock the keypad in setup mode type 401# it should say setup completed and that's it.
+Rye Cooder Thank you so much! Very helpful.
hi you seem like you know this alarm well i have 1 question for you i installed this system for the first time and i found that regardless of which sensor was triggered it gave the intruder 20 seconds ...this time should only be for the door contact (entry/exit route) and not every sensor so my question is how do i set this to only the entry route and not every sensor iv tried to change the zone types but it wouldn't make a difference all the zones acted the same and wouldn't trigger the alarm straight away as they should
How do I put credit on my alarm it is a giffgaff sims
How to connect wired system
help all phone number deleting ??? operating pliss
how reliable is this system? I can get for 120 on ebay but not sure if this chinese stuff is reliable
+Anu Chohan VERY Reliable! Even ADT alarm equipment is made in China. The only alarm equipment made in america is SOME of the ADEMCO alarm equipment. ADEMCO is the oldest American alarm manufacturer in N.Y. ADEMCO stands for Alarm Device Manufacturing Company.
i think the gsm thing sucks ass cuz it takes some seconds to send u sms while burglrs can take your shit off from your house while ur miles away, and go fastly away i think its pointless, if it isnt connected to the police appartment. or security house.
+samuel sammal it depends of your speed connection, my one is very fast
I use it in my home but I had to change motion sensor twice in a year they are out of service. The sensors are so useless and I don't trust the system
cant get sms from alarm or send sms from phone to arm? i pressed 461# then 49 and my number.the alarm makes a funny da dadada dada dada but no sms message? i have a giff gaff sim in alarm and ive just topped the sim up
I have the same problem :(
want to make your alarm actually do its job ? inprover video here on youtube, new product
Why not speak
craigr306 he has anti speak syndrome.
this is chinee crap from aliexpres
6666 this is devil number
+Вадим Грозов no 666 is
yeah yeah but its satan number devil nimber is 6666
World English Bible
Revelation 13:18
Here is wisdom. He who has understanding, let him calculate the number of the beast, for it is the number of a man. His number is six hundred sixty-six
doesnt work with battery. any settings?
doesnt work with battery. any settings?
doesnt work with battery. Any settings?