Still helping people with this video mate, I just ordered one for the garage and the instructions were even more sparse! Didn't even have the coding numbers so this is fantastic up and running now
Hello! Would you happen to have a copy of the user manual? I bought a house with this alarm system in it and it's asking for the password what I don't have. Thanks!
The first 8 minutes look great! This has to be the best video on the subject. Oh, the mail lady just showed up with the system, so I'll watch more later as I try to program it. Thanks so much for the video. Keep up the great work!
Thank you so much for creating and posting this video. The included instructions are less than crystal clear. I really appreciate your taking the time to do this.
Fantastic video...had the system set up in 25 minutes, just leaving me to affix the sensors and switches in the desired positions! Awesome! Take a pat on the back!
Just bought this kit. Thank you for this video. Like yourselves, would have taken time to suss the manual, but by following your instruction, I set it up in no time. Regarding external siren alarm, I'd agree with you, but I'm putting it in place purely as a visual deterrent. I also agree that it doesn't look very waterproof at the rear, what I have done, is apply silicone sealant around it. It may work it may not, but for anyone wishing to use the siren, this may be one way of extending its longevity.
At least you have a manual! I've got the same system and my instructions amount to a double sided A4 sheet! For the money though its a damned good system and once you can understand the chinese-english, quite easy to set up.
Best review out there. Although you missed a step. Host keypad lock setting 6666#401# Otherwise your password will not be needed to un-arm. Also location of siren wires go to BZ- and BZ+ on the right side of rear connections. I clear caulked the battery power switch behind the main keypad unit so it stays ON. Clear caulked battery door on main keypad unit also. We don't need to make things easy for intruders.
SupremeGadgets, I just bought a same thing of this OEM security alarm. I have 1 question: The keypad require power supply and it has a on/off switch at the back of it; so if the burglar entered my house go towards the keypad, pull of the power cable and turn off the switch; then the siren will be off and there are nothing we can do for this cons ya?
Hello, everything you describe is commonly available in the user manual. I would like to know how to change the content of the sms that the alarm sends e.g. during an alarm. Somehow it must be easy. The alarm is sold in different languages and the service pins on the back are brought out. I modified all the audio messages, just look in the datasheet of the GSM modem used. Unfortunately the SMS are stored in the control processor and it also sends them to the GSM modem in PDU mode. Do you know how to do it?
Hi all I have set up one of this alarm it’s great but only problem is indoor sensor flash even I’m indoor when I look it’s not alarm or anything just kill battery for nothing. I read information but can’t find any information about. While alarm off and I’m indoor is this sensors can be turned off and turned on when I alarmed or not. .? Many thanks
Hi , I found your video interesting and informative , however can you possibly advise if hard wired n/o or n/c inputs can be accommodated such as a pnp proximity switch ? Thanks
Can anyone help. Every time a sensor is triggered when the system is NOT armed, it sets off the external outside alarm (the same as the one shown at 6:37 in this video). But when the system is armed the sensors trigger the host alarm inside, but that doesn't set off the outside alarm.
nice to finally find a video but the issue is a lot of the other settings have not be addressed. I want to add a doorbell. What about home zone only and away zone only. What about arming the alarm when away.
Hi Mike. How can the system be programed to the smoke detector will send an SMS signal even when the alarm in in the disarm state? Example a 24 hr. protection for panic, or fire.
You can open it and disconnect the speaker wire, it will disable any voice from the system, I recommend to do it after you set it up so you will get feedback. What I did was to add small on/off switch to the speaker and glued it inside the battery case so I can turn the system speaker on if I want to... Do it at your own risk...
Where do you mount the control box? it has to be accessible in order to activate/deactivate. But, if it's accessible then so is the siren that's connected to it and all a burglar has to do is cut the wires to the siren during the delay period to stop it. This is especially true if you do not use the external box. What's the solution?
+pigsbishop99 First of all the Main Host should be mounted in every pleace that has strong signal , if u want to activate/deactivate from the panel mount it near the entrance if ur worried about cutting the wire u can add another wire and take the siren in a long distance(i tried 10m), but if u want my advise dont worry about the siren , worry about transsmision of the SMS/Call and about the distance between the wireless device and the main hot
Did you ever get an answer? Somehow I turn off the voice prompt and I don't know how to turn it back on. Please let me know if you find the right code to do this. Thank you.
Thank you for this intro to setting up a gsm alarm sys. I find I am not too bad at reading googlenese but this one had me scratching my head for as few moments until I saw your video Thanks.
@@radon_officially That is what mine did. I had tested it. Furthermore, I received a text when the alarm was triggered, and on arriving home a while later... it was still going
hi super video..can u please tell me how to set up the exterior wireless alarm with the center? also any idea why it wont keep the time every time i push all the right keys, it doesnt keep the time.... thanks a lot...
That was amazingly helpful. Thank you so much. We were trying to make it much more complicated that it actually was. We do really need to know how to add the additional siren though. We are using it internally for extra noise by one of the potential entry doors. I agree it doesn't seem suitable for external use.
Do you need to insert the sim card pin? I have the sim card from the portuguese operator MEO, and the indication of the activated network does not appear
Just a little tip: There's more than one variant of these systems floating around. I misplaced the original instructions and got perplexed when some of the codes from the manual I downloaded wouldn't work. The default password is different too (6666 vs 8888). It doesn't help there's no make/model written on the systems either. So download more than one manual if you find some of the codes don't work as expected. It's a case of trial and error.
Does anyone know if you can add the sim after the unit has been set up and how this is done. is it just a matter of inserting it and setting up the numbers?
I have a couple of questions 1. Will this system work In a country outside of the us? I have a vacation home in Mexico but live in the USA. 2. Would I be notified if the alarm goes off in my cellphone my phone back home in the USA? 3. Can I activate and deactivate the alarm by phone? For example if the alarm goes off
+Live to inspire hi. Unfortunately I don't have any experience of this system outside of using it in the UK. I can't see why it wouldn't work in Mexico though with a Mexican SIM. I would think you'd be able have it call your US cellphone so long as you add the country code to the beginning of the number while setting up the alarm. And finally yes you can activate/deactivate the alarm through your phone by calling/texting the alarm. Hope that helps.
What the reviewer describes as a battery compartment on the siren is in fact where the pairing button is situated. No batteries go in there. What he calls clips for wiring sensors are in fact resistors which are used when wired sensors are used.
Hi - very good video and thanks. Unable to set the panel user code on mine. Wondering if mine is faulty or if there is a master reset code that resets back to factory settings ie unscrews everything. Many thanks
Thanks for this but would like to know more about sim card - my GSM didn't come with one - and do I need to do anything to my phone to receive text messages - app download?
great video but i cant seem to get the alarm to arm and disarm with a code i just have to push arm or disarm buttons ive tried the instruction 38 then a code but wont accept thanks
Yes you certainly helped won’t be up to the door and the Pir sensor and also said about the time for basically i’ve got my System up and running but what you did not say about the sim card before powering up the system so now I’ve got to watch your video again deleting all my settings I’ve got to take the battery out and powersupply got put your sim In the first before power when out the system why did you not explain this I spent hours working on it it would’ve saved all of the time so thank you for it
I do the sensors always flash with the red light or do they only light up when they detect movement because I have a cheap one and even when not in use because the door sensor as always got the red light on so after change the battarys every week
Where can I find the manual you are using. There is no manual with the unit I received, just an incomprehensible and ironically-named "Quick" Installation Manual. Specifically, the method you show to set a disarm code does not seem to work. I go through the procedure, but still I can disarm it just by hitting the "disarm" button. Second problem is the SIM Card. I bought one and activated it, but apparently it needs some "APN" settings before it will function, and I haven't the slightest clue how to do that. And finally, of course, thanks for the command codes in this video, but there are many others I imagine that I will want to use, but I need the manual to look them up I think. Thank you for a very clear and helpful video!
Could you tell me how to go about setting"home mode"? I know it's set via the lightning bolt on the key fob, but when I press it, it arms the alarm but goes off soon as one of the passives is activated, I thought pressing the button is all that is required but appears not, any help would be great
Hello , first of all thank you for the top video!The installation of the sim card does not work for me. Must the card on the post (Germany)be activated?
What about time delay from breach of security to sending text or telephoning ? Is that the same as key pad entry with pin number or is that something different. Also do you have a list of all codes my book seems have gone walkabout. You would think by now the manual would have been updated to make sense ?
Hi Mikey....thinking of getting one of these kits...see you have had it a few years now...how reliable has it been. I presume you don't need to use the SIM card part of it if you don't want to. Is that correct in that you cant set the alarm to turn off if triggered after a certain time....would it sound for hours and hours if your not home....that would not be good. Nick.
nickjaxe you are correct, I just bought this system and my main concern is having the alarm sound for hours if for any reason I stay out of my home for long time while working, it would be awesome if I could set the alarm to sound just 40 seconds when activated
@@garyzamudio9586 Hi Gary...so thats not good...I suppose I could buy an extra key fob and give it to my neighbor for them to turn it off it it triggers...but still far from ideal. Have you installed the Alarm yet Gary...if yes be interested in your feed back. I was good to buy the smaller external sounder...did you choose that option.
nickjaxe I haven't heard about the smaller external sounder, I install the normal version and it works well, I Don t install any SIM card just the alarm system with out it, and works very well, the siren is very loud but for me is hard to understand why the makers of this system put many options to personalize the system but dot put the option to stop sound the alarm after some seconds, now I believe my only option left is activate the SIM card to get message in my phone that way I can go back home in case alarm is activated but I would prefer do not. mess with SIM card thing because I read reviews about it say in is difficult
Sorry, yet another question....How do I set a bed time set where I want everything on (Door Switches and PIR's) apart from the sensor at the top of the stairs so we can walk about freely to the bathroom at night? It sounds like it should be on the HOME ALARM set but with the PIR's working apart from the one I have mentioned?????
just a question? what way up does the pir fit ? the writing on the back and the mounting bracket suggests the window being on the bottom with the led above .. what you think?
Good presentation but did not show solar alarm set up which I am having problems with. My solar siren is charged switched on and I have tried to programme but it is activating when alarm is in disarm mode please help
Hi what happens if say the thief's brake in then switch the alarm control box off or even rip the sensor down and turn it off there's enoght time to do it
Good video on an intimidating user manual, there is actually a good English manual on one of the US sites which is in very understandable English. Still pondering about making the external strobe waterproof and fitting, but as you say no one takes a blind it of notice of external sounders unless they are forewarned that the house is unoccupied. So will probably rely on te GSM to warn of any intrusion. Thanks again for the very helpful review.
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice recording message.
Hello, I need help making the wired connection work, do you have a video explaining how to connect and configure correctly the wired back of this alarm system. Thanks
Hi, My question might have been answered already but I'm slightly stuck. When I'm asleep in bed I want the alarm to go off instantly if the sensor is intruded or someone tries to enter. Then I want about 30 seconds to type in the code when I come home in the evenings without the alarm going off. Is it possible to have both as I just seem to have the beeping without any siren for both which doesn't make much sense if someone intrudes the siren doesnt go off... but when I try and change it, I get the siren the second I come home in the evenings. What codes etc do I press to change all this? Many thanks!
Hi there.If I wont to connect my bike to the alarm with a single core cable around the bike and then connect into one pair of wired contacts will I need a resistor as well and if so what size.Thank you Mike
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
Was there any problem with pick up range for the switches and PIR's? My PC Wi-Fi struggles through walls and distances beyond 7 metres. Suck it and see I suppose.
Really informative, thank you....One question though, my alarm came with all passives etc already paired to the control box. How can I set external door contacts on a different zone to internal passives? Thanks
The Grocer You can set the external door contacts by programming to a zone number of your choice. 1. Type the Admin password then press # key. Example - [6666] + [#] 2. Type [23] + [ZoneNoOfChoice] then press # key. Example - [23] + [ZoneNoOfChoice] + [#] 3. Press the button on the door unit, you should hear "Coding Complete" 4. Press [*] + [#] when complete.
Hi great video, please can you advise does this GSM system allow me to have a part system i.e. downstairs on and upstairs off (like when I go to bed). Thank you.
Thanks for this.. Very informative... The big box with the red bubble that you did not use has a siren in it doesn't it? I have a system like this on order so I can't check that myself.
I have what looks like the same GSM Alarm System. Everything seems to be working OK with the external siren wire connected. Without this siren connected I hear nothing from the Alarm Control Panel (ACP). I thought there was a way to make the speakers in the ACP sound the alarm,. Is there an advantage putting different door sensors on different zones (or is it even possible)?
Mines stopped detecting the IR sensors after a few months. Tried Batteries were replaced and tried removing/re-adding them but neither is detected when I trigger them. Both my IR sensors were indoors so I don't understand why they stopped working. My guesses is it's something faulty with the panel, doubt both sensors would go bad.
Just bought this system for my house. My only problem is if I arm the host and not turn on the senosr on app the system doesnt work. Also if I disarm the host when the sensors are on the alarm will still come. How can the system work through the host
Thank you so much for posting this Very useful video. Can I just ask do you need to keep topping up the sim card. I have a 99p lycia mobile sim which I purchased from my local newsagents but it's not quite working. Where am I going wrong?
Still helping people with this video mate, I just ordered one for the garage and the instructions were even more sparse! Didn't even have the coding numbers so this is fantastic up and running now
Hello! Would you happen to have a copy of the user manual? I bought a house with this alarm system in it and it's asking for the password what I don't have. Thanks!
Thank you so much sir
The first 8 minutes look great! This has to be the best video on the subject. Oh, the mail lady just showed up with the system, so I'll watch more later as I try to program it. Thanks so much for the video. Keep up the great work!
Thank you so much for creating and posting this video. The included instructions are less than crystal clear. I really appreciate your taking the time to do this.
Fantastic video...had the system set up in 25 minutes, just leaving me to affix the sensors and switches in the desired positions!
Awesome! Take a pat on the back!
Just bought this kit. Thank you for this video. Like yourselves, would have taken time to suss the manual, but by following your instruction, I set it up in no time. Regarding external siren alarm, I'd agree with you, but I'm putting it in place purely as a visual deterrent. I also agree that it doesn't look very waterproof at the rear, what I have done, is apply silicone sealant around it. It may work it may not, but for anyone wishing to use the siren, this may be one way of extending its longevity.
you have just made the manual for this system understandable. Thanks.
At least you have a manual! I've got the same system and my instructions amount to a double sided A4 sheet! For the money though its a damned good system and once you can understand the chinese-english, quite easy to set up.
Best review out there. Although you missed a step. Host keypad lock setting 6666#401#
Otherwise your password will not be needed to un-arm. Also location of siren wires go
to BZ- and BZ+ on the right side of rear connections.
I clear caulked the battery power switch behind the main keypad unit so it stays ON. Clear caulked battery door on main keypad unit also. We don't need to make things easy for intruders.
Cheers!!! This was defeating me for an age!!! This is an important step in configuring the device.
Cheers. I was having problem with what. What one is very important. !!! Respect
Thank you. This is very helpful. I just purchased my wireless arlarm set. Saved me a lot of time go8ng thru the booklet.
Good to hear 😀
SupremeGadgets, I just bought a same thing of this OEM security alarm. I have 1 question: The keypad require power supply and it has a on/off switch at the back of it; so if the burglar entered my house go towards the keypad, pull of the power cable and turn off the switch; then the siren will be off and there are nothing we can do for this cons ya?
This is by far, one of the best youtube videos ive watched. Thank you very much. helped me a lot. ten out of ten
Thank you
You make a nightmare a nice experience! You are so correct on the Chinese instruction book.
Thanks
Hello, everything you describe is commonly available in the user manual. I would like to know how to change the content of the sms that the alarm sends e.g. during an alarm. Somehow it must be easy. The alarm is sold in different languages and the service pins on the back are brought out. I modified all the audio messages, just look in the datasheet of the GSM modem used. Unfortunately the SMS are stored in the control processor and it also sends them to the GSM modem in PDU mode. Do you know how to do it?
Thank you Very much. Please how to connect a wired magnetic sensor? Thank you again 😊
excellent, thanks for taking the time to do this video, much better than working out the manual !!
Hi all I have set up one of this alarm it’s great but only problem is indoor sensor flash even I’m indoor when I look it’s not alarm or anything just kill battery for nothing. I read information but can’t find any information about. While alarm off and I’m indoor is this sensors can be turned off and turned on when I alarmed or not. .? Many thanks
Hi , I found your video interesting and informative , however can you possibly advise if hard wired n/o or n/c inputs can be accommodated such as a pnp proximity switch ? Thanks
Can anyone help. Every time a sensor is triggered when the system is NOT armed, it sets off the external outside alarm (the same as the one shown at 6:37 in this video). But when the system is armed the sensors trigger the host alarm inside, but that doesn't set off the outside alarm.
nice to finally find a video but the issue is a lot of the other settings have not be addressed. I want to add a doorbell. What about home zone only and away zone only. What about arming the alarm when away.
Very good video thanks. Anyone know how to turn off the loud voice and squeak box makes everytime you arm or disarm the alarm? Many thanks.
Hi Mike. How can the system be programed to the smoke detector will send an SMS signal even when the alarm in in the disarm state? Example a 24 hr. protection for panic, or fire.
Hi,
Can the talkback feature be turned off when arming and disarming?
Also can the keypad volume be altered?
Good video by the way very informative 👍
You can open it and disconnect the speaker wire, it will disable any voice from the system, I recommend to do it after you set it up so you will get feedback.
What I did was to add small on/off switch to the speaker and glued it inside the battery case so I can turn the system speaker on if I want to...
Do it at your own risk...
Very clear instructions on set up, saved ne a lot of deciphering of the manual, thanks a lot.
Where do you mount the control box? it has to be accessible in order to activate/deactivate. But, if it's accessible then so is the siren that's connected to it and all a burglar has to do is cut the wires to the siren during the delay period to stop it. This is especially true if you do not use the external box. What's the solution?
+pigsbishop99 First of all the Main Host should be mounted in every pleace that has strong signal , if u want to activate/deactivate from the panel mount it near the entrance if ur worried about cutting the wire u can add another wire and take the siren in a long distance(i tried 10m), but if u want my advise dont worry about the siren , worry about transsmision of the SMS/Call and about the distance between the wireless device and the main hot
Is there a way to disable the voice on the keypad?
Did you ever get an answer? Somehow I turn off the voice prompt and I don't know how to turn it back on. Please let me know if you find the right code to do this. Thank you.
Put a sound deading tab over the speaker holes i used a chair / furniture leg sticker
Thank you for this intro to setting up a gsm alarm sys. I find I am not too bad at reading googlenese but this one had me scratching my head for as few moments until I saw your video Thanks.
Suppose the alarm is triggered and you are not home. Does the alarm continously sound or does it sound for few minutes and then goes silent?
Stays continuous
@@Heckle174how do you know
@@radon_officially That is what mine did.
I had tested it.
Furthermore, I received a text when the alarm was triggered, and on arriving home a while later... it was still going
@@Heckle174 oh
Very helpful, much appreciated 🙌🏿
hi super video..can u please tell me how to set up the exterior wireless alarm with the center? also any idea why it wont keep the time every time i push all the right keys, it doesnt keep the time.... thanks a lot...
That was amazingly helpful. Thank you so much. We were trying to make it much more complicated that it actually was. We do really need to know how to add the additional siren though. We are using it internally for extra noise by one of the potential entry doors. I agree it doesn't seem suitable for external use.
Nice video guide. how do you add or remove saved phone numbers?. Is it possible to view the saved phone numbers?
Do you need to insert the sim card pin? I have the sim card from the portuguese operator MEO, and the indication of the activated network does not appear
Do you not have to register the sim also fixing the outside alarm without mains power how long do the batteries last?
Just a little tip: There's more than one variant of these systems floating around. I misplaced the original instructions and got perplexed when some of the codes from the manual I downloaded wouldn't work. The default password is different too (6666 vs 8888).
It doesn't help there's no make/model written on the systems either. So download more than one manual if you find some of the codes don't work as expected. It's a case of trial and error.
Great walk through. Most grateful. Otherwise instructions poor altho Amazon now provides a PDF. Any ideas how I can get other compatible PIR's?
Does anyone know if you can add the sim after the unit has been set up and how this is done. is it just a matter of inserting it and setting up the numbers?
You can insert later... instructions are clear in the book .
I have a couple of questions
1. Will this system work In a country outside of the us? I have a vacation home in Mexico but live in the USA.
2. Would I be notified if the alarm goes off in my cellphone my phone back home in the USA?
3. Can I activate and deactivate the alarm by phone? For example if the alarm goes off
+Live to inspire hi. Unfortunately I don't have any experience of this system outside of using it in the UK. I can't see why it wouldn't work in Mexico though with a Mexican SIM. I would think you'd be able have it call your US cellphone so long as you add the country code to the beginning of the number while setting up the alarm. And finally yes you can activate/deactivate the alarm through your phone by calling/texting the alarm. Hope that helps.
can you please explain about presetting in gsm to get massages and calls
What the reviewer describes as a battery compartment on the siren is in fact where the pairing button is situated. No batteries go in there. What he calls clips for wiring sensors are in fact resistors which are used when wired sensors are used.
Good video can i ask does this need a sim in to work
You need a SIM to use the phone features
Hi - very good video and thanks. Unable to set the panel user code on mine. Wondering if mine is faulty or if there is a master reset code that resets back to factory settings ie unscrews everything. Many thanks
Thanks for this but would like to know more about sim card - my GSM didn't come with one - and do I need to do anything to my phone to receive text messages - app download?
What kind of sim card do I need? And how do I connect it go my phone?
same doubt here, if you have the answer, please, tell me. Thanks!
You can use any sim card, but I recommend a prepaid card. (must be a mini sim.) Important thing is to remove the sim pin.
Thanks I was given a panel the same as this but no instructions to speak of. Any idea where I can buy the key fobs?
No sorry best just looking on eBay :)
Thank you. You made it a lot easier to set up then the book.
Great to hear!
great video but i cant seem to get the alarm to arm and disarm with a code i just have to push arm or disarm buttons ive tried the instruction 38 then a code but wont accept thanks
Yes you certainly helped won’t be up to the door and the Pir sensor and also said about the time for basically i’ve got my System up and running but what you did not say about the sim card before powering up the system so now I’ve got to watch your video again deleting all my settings I’ve got to take the battery out and powersupply got put your sim In the first before power when out the system why did you not explain this I spent hours working on it it would’ve saved all of the time so thank you for it
Superb Video. Thanks very Much. Got my Alarm set up so easily following your directions. God Bless You Mate.
I do the sensors always flash with the red light or do they only light up when they detect movement because I have a cheap one and even when not in use because the door sensor as always got the red light on so after change the battarys every week
Where can I find the manual you are using. There is no manual with the unit I received, just an incomprehensible and ironically-named "Quick" Installation Manual.
Specifically, the method you show to set a disarm code does not seem to work. I go through the procedure, but still I can disarm it just by hitting the "disarm" button. Second problem is the SIM Card. I bought one and activated it, but apparently it needs some "APN" settings before it will function, and I haven't the slightest clue how to do that. And finally, of course, thanks for the command codes in this video, but there are many others I imagine that I will want to use, but I need the manual to look them up I think.
Thank you for a very clear and helpful video!
Could you tell me how to go about setting"home mode"? I know it's set via the lightning bolt on the key fob, but when I press it, it arms the alarm but goes off soon as one of the passives is activated, I thought pressing the button is all that is required but appears not, any help would be great
I am wondering this also as I am running into this also. Any advice?
Can you buy additional sensors for this system and from where?
Is it possible to do a walk test to check that everything is working without setting of the alarm each time it is triggered?
Hello , first of all thank you for the top video!The installation of the sim card does not work for me. Must the card on the post (Germany)be activated?
Hi. I think the SIM will have to be activated yes
Could you tell me how to wire the siren?. The back of the panel has speaker positive BUT NO negative
What’s the factory resetting process
It's there a way to add multiple phone numbers to dial when the alarm is triggered. Maybe one after the other if the first isn't answered?
Does one need to pay a monthly sim card plan?
What about time delay from breach of security to sending text or telephoning ? Is that the same as key pad entry with pin number or is that something different. Also do you have a list of all codes my book seems have gone walkabout. You would think by now the manual would have been updated to make sense ?
Hello could you help how do set time for when Your enter your home so you have enough time to turn alarm off ??
Hi Mikey....thinking of getting one of these kits...see you have had it a few years now...how reliable has it been.
I presume you don't need to use the SIM card part of it if you don't want to.
Is that correct in that you cant set the alarm to turn off if triggered after a certain time....would it sound for hours and hours if your not home....that would not be good.
Nick.
nickjaxe you are correct, I just bought this system and my main concern is having the alarm sound for hours if for any reason I stay out of my home for long time while working, it would be awesome if I could set the alarm to sound just 40 seconds when activated
@@garyzamudio9586 Hi Gary...so thats not good...I suppose I could buy an extra key fob and give it to my neighbor for them to turn it off it it triggers...but still far from ideal.
Have you installed the Alarm yet Gary...if yes be interested in your feed back.
I was good to buy the smaller external sounder...did you choose that option.
nickjaxe I haven't heard about the smaller external sounder, I install the normal version and it works well, I Don t install any SIM card just the alarm system with out it, and works very well, the siren is very loud but for me is hard to understand why the makers of this system put many options to personalize the system but dot put the option to stop sound the alarm after some seconds, now I believe my only option left is activate the SIM card to get message in my phone that way I can go back home in case alarm is activated but I would prefer do not. mess with SIM card thing because I read reviews about it say in is difficult
Sorry, yet another question....How do I set a bed time set where I want everything on (Door Switches and PIR's) apart from the sensor at the top of the stairs so we can walk about freely to the bathroom at night?
It sounds like it should be on the HOME ALARM set but with the PIR's working apart from the one I have mentioned?????
good review on alarm set up.
Hello. Can you tell me if you can put the device on silent mode and how is this procedure done? Thank you
just a question? what way up does the pir fit ? the writing on the back and the mounting bracket suggests the window being on the bottom with the led above .. what you think?
Got the alarm system and thanks to you it works fine, but how do I keep the light on the screen,as it was on all the time but now it's gone off.
Good presentation but did not show solar alarm set up which I am having problems with. My solar siren is charged switched on and I have tried to programme but it is activating when alarm is in disarm mode please help
Always use the outside siren when purchasing the alarm system it helps heaps
Hi what happens if say the thief's brake in then switch the alarm control box off or even rip the sensor down and turn it off there's enoght time to do it
Good video on an intimidating user manual, there is actually a good English manual on one of the US sites which is in very understandable English. Still pondering about making the external strobe waterproof and fitting, but as you say no one takes a blind it of notice of external sounders unless they are forewarned that the house is unoccupied. So will probably rely on te GSM to warn of any intrusion. Thanks again for the very helpful review.
Url please Jim.
can you be able to connect Vibration sensors with this system? do they have to be wired or connected to the system through radio?
This unit accept 10 sec voice recording. Do you know under which condition this voice recording is heard after host sounds alarm? When the unit call the preset numbers does not announce the voice recording message.
Hello, I need help making the wired connection work, do you have a video explaining how to connect and configure correctly the wired back of this alarm system. Thanks
Hi, My question might have been answered already but I'm slightly stuck. When I'm asleep in bed I want the alarm to go off instantly if the sensor is intruded or someone tries to enter. Then I want about 30 seconds to type in the code when I come home in the evenings without the alarm going off. Is it possible to have both as I just seem to have the beeping without any siren for both which doesn't make much sense if someone intrudes the siren doesnt go off... but when I try and change it, I get the siren the second I come home in the evenings. What codes etc do I press to change all this? Many thanks!
Hi, do you know how turn off voice or put lower?
Hi there.If I wont to connect my bike to the alarm with a single core cable around the bike and then connect into one pair of wired contacts will I need a resistor as well and if so what size.Thank you Mike
good to see the full demo. Thank you..
is there a user manual online to download. This would help. Thanks in advance.
i just bought one and i need help because one of the sensor is not working. when i lock it and i walk in room it just goes beep beep beep and nothing happends. The other 2 the alarm goes off but thats only because i set it at 23 then a random number 09 and pressed hash key so it must be set up with right zone. But i cant set this last one to that zone because I cant delete it cos i dont no what number it is set at. What can i do help me ?
Was there any problem with pick up range for the switches and PIR's? My PC Wi-Fi struggles through walls and distances beyond 7 metres. Suck it and see I suppose.
Really informative, thank you....One question though, my alarm came with all passives etc already paired to the control box. How can I set external door contacts on a different zone to internal passives? Thanks
The Grocer You can set the external door contacts by programming to a zone number of your choice.
1. Type the Admin password then press # key. Example - [6666] + [#]
2. Type [23] + [ZoneNoOfChoice] then press # key. Example - [23] + [ZoneNoOfChoice] + [#]
3. Press the button on the door unit, you should hear "Coding Complete"
4. Press [*] + [#] when complete.
FlyingBassMan
Thank you very much :)
Hi great video, please can you advise does this GSM system allow me to have a part system i.e. downstairs on and upstairs off (like when I go to bed). Thank you.
nope, no partion
Thank you very much. This video & user manual helped a lot ❤️
Thanks for this.. Very informative... The big box with the red bubble that you did not use has a siren in it doesn't it? I have a system like this on order so I can't check that myself.
Hi my friend... there is the instruction book somewhere in the INTERNET in a pdf ??
cool video. but is the alarm loud enough? because i would hang it in my seperate garage.
I have what looks like the same GSM Alarm System. Everything seems to be working OK with the external siren wire connected. Without this siren connected I hear nothing from the Alarm Control Panel (ACP). I thought there was a way to make the speakers in the ACP sound the alarm,. Is there an advantage putting different door sensors on different zones (or is it even possible)?
Hi Many Thanks for very helpful Video. Could you please also explain how to setup the Small Siren ? Thanks
How to stop the loud bleeps when pressing buttons or turning alarm on. Please
does this system require high speed connection or land line. Or can it use only the cell towers through my mobile phone.
Is it possible to arm only 1 zone ? For example just to arm the garage ?
How do i create an entry point ie the door. as all the contacts and pir's go into countdown during arm any info please.
Can someone please explain how to wire up the small indoor siren ? What connectors on the back of the alarm box do I use ?
Hi. I have this system. Do you know How to off twice beep by siren when you unlock? Can I add extra siren to system? Thanks
Do you not know how to set the bell box i am stuck on it done everything else gonna seal it with clear silicone so it is dry
Mines stopped detecting the IR sensors after a few months. Tried Batteries were replaced and tried removing/re-adding them but neither is detected when I trigger them. Both my IR sensors were indoors so I don't understand why they stopped working. My guesses is it's something faulty with the panel, doubt both sensors would go bad.
Just bought this system for my house. My only problem is if I arm the host and not turn on the senosr on app the system doesnt work. Also if I disarm the host when the sensors are on the alarm will still come. How can the system work through the host
excellent explanation , well done
Many thanks!
Thank you for your gsm alarm system tutorial. Can you show us how to wire wired door contact, PIR and how to use those resistors. Thank you
Thank you so much for posting this Very useful video. Can I just ask do you need to keep topping up the sim card. I have a 99p lycia mobile sim which I purchased from my local newsagents but it's not quite working. Where am I going wrong?