Good day to you I thanks for responding back to me.i have a 08 dodge cummins. i.m. look for new injectors. i have stock injectors stock cp3 pump. looking for 90hp. injectors. what would be the best rout to take. your the man to talk too. thanks for your help. have a very good day. J.C.
@@CUTTERUPROB im trying to make. 650.hp. not trying to make. to much big power just when need it i will have it. looking at 10mm cp3 pump and 90 hp injectors.is this the way to go ROB.
Yep correct that the way Cummins trained us on the ISL that I work on for public transportation buses where I work it’s same process for us
🙏
You make everything look easy
with the tools and know how everything is easy 🙃
How do you torque the #3 injector tube nut? That electrical connector is in the way unless I am missing something.
Does anybody know where I can get 97 dt466 injector line
Any info on the differences in injector coils? Are later different voltage? Looking for injectors to run with a CM2150 ECM
5.9 to 6.7 are different voltage. Then 18 and new is different. But I don’t know the voltages off the top of my head
@@CUTTERUPROB I have the 6.7 C5255257 piston. Any idea what spray pattern this needs?
Good day to you I thanks for responding back to me.i have a 08 dodge cummins. i.m. look for new injectors. i have stock injectors stock cp3 pump. looking for 90hp. injectors. what would be the best rout to take. your the man to talk too. thanks for your help. have a very good day. J.C.
How much power do you want to make ?
@@CUTTERUPROB im trying to make. 650.hp. not trying to make. to much big power just when need it i will have it. looking at 10mm cp3 pump and 90 hp injectors.is this the way to go ROB.
Does the connector tube need to be removed to replace the injector properly? Or does that not matter, thanks
Yes it must be removed. Injector won't come out with tube installed
👍👍
🙏