I spent almost 3 hours trouble shooting with software and the bios and it turned out to be the off/on switch! Thank you for this video or else I wouldn’t have figured it out!
Thanks for this. I have been in to my computers for many years and i have never been interested in RGB, so my knowledge of how this works with regards to the control of hubs is limited. Building a building a PC for my teenage niece and we are going all out on ARGB so this saved mucking about in manuals and reading loads of guides before buying hub n other bits n bobs.
to let CORSAIR ram work 1 you have to go to icue setting / software and games and active software integrations / 2 in MSI center /mystitc light /mystitc light settings /active third party RGB . do system restart . and will work i have on and works find you have to do system restart .. thanks
Hi DRAGONFLY, that’s good information. You do want to ensure that the software integrations is selected in icue as well as the third party RGB setting in mystic light. I had tried that, to no avail. But you got me thinking, I had been using signal RGB on this PC, and I had it starting automatically, I was shutting it down before loading icue and MSI center, but wasn’t working. I did find today that if I prevent signal RGB from ever loading in the first place it now works as expected! Haha. So, if you have signal RGB starting, prevent it from starting and reboot, mystic light will work properly. Perhaps I’ll do a follow up video specific for to Corsair. Thanks for pointing out the steps for Corsair!! Thanks for watching!!
My MSI RGB mouse and keyboards won't show in Mystic Light after an update. I've uninstalled/reinstalled the center but still doesn't show. Anyone have any ideas?
I know you covered mystic light I have had my msi computer for 6 months now but all of the sudden the lights went out and I can't get them to come back any ideas that could help would be awesome
AntEsport sx3 cabinet comes with argb light and rear mounted argh fan , These argb s can be controlled via reset switch(which is conncted to the hub (which is hidden)) but after using Mysctic light to control argb which worked fine but after turned off mystic light ,reset switch does not control the argb
Hi i also have the msi mystic light software. i plugged argb fans into a hub then the hub into the argb header on the motherboard. but in mystic light i cant control the fan colors
I have an issue with one of my AIO fans. The RGB works for the most part but on one of the fans quarter of the fan decides to light up sometimes or not at all in that section. Not sure what is going on
What happens when you start PC after shutdown? Does your color settings apply on power on? Or does it apply only after software starts after Windows starts? Thanks
I was able to connect my corsair ram kit's leds to mystic light using icue (corsaire vengeance rgb pro), and make an all sync setup on mystic light (mb : x570 - a pro). The problème is that the rgb stuffs are no longer working as intented, as soon as i turn off my pc. Same story upon starting the PC, rgb are doing their thing, until windows actuallyt lights on and open mystic light, which finally talkes controle again after a good minute. I would like to know if there anything i can do to make sure my RGB works as intented (according to mytic light configuration) from the moment i start the PC, till i shut it down.
I don't have that mystic light toggle at the top! I have to open the program separately for some reason and so I can control all together with the mouse and keyboard. So frustrating since its a new MSI computer!
Can u connect a aio cooler and fans on a rbg hub, and would they still work ,or so you need the radiator fans on the aio cooler plugged directly into the motherboard? Because mine do not change color, I have a z490 gaming plus and I plugged the radiator fans into a hub both the power and rgb ,and i did so with another 6 fans but none of them are changing color
I have an Asus Moba, and a MAG MSI C360 liquid, i installed this app but msi center doesn't show me Mystic Light on the pannel, someone has the same issue with moba that is not from msi? thanks alot
i have msi aegis but only 2 things show up on led list JRGB1 and JARGB v2 1 why are the 4 big lights not controllable??? what am i missing? im a computer novice
This "scrapware" does not work on my Z790P-wifi motherboard. If i try to start it from the MSI Center - an endless waiting begins. It shows rotating load icon and nothing happens. Reinstalling of mystic light and the MSI Center does not help. My RGB lights is working with default settings, enabling sleep function when my monitor goes off. But sometimes it cant wake up at all(all RGB is off) or only channel 1 wakes, leave another channel off. Restarting of MSI LED Keeper service can help to reinitialize LED controller and bring my RGB devices alive again.
hi i have a problem, i have a config with an Corsair carbide Spec omega + x2 rgb fans, corsair ddr5 rg, tehrmalright peerless assasin rgb and a 3070ti rgb The ram + cooler + 3070ti are detected on msi mystic light But the 2 corsair fans and the spec omega aren't detected I've tried to instal icue but if i do that the ram are not detected on mystic light but only on icue (and i prefer mystic than icue), the spec omega is detected on icue But the x2 rgb fan aren't detected on icue too ... They was working before i install icue, the moment i've installed, they turned off the rgb, and i cannot put them ON (nothing detect them), they work but not the rgb Do you have an idea to fix that ? i've tried to delete icue and msi center but nothing changes...
Mine says waiting for SDK intianlization and doesnt do anything ever just keeps saying that .. When i built my pc few mouths ago they worked for a few weeks then stopped the mystic light page would glitch and not show any rgb or allow me to click on it and now it keeps saying that its initialization im so annyoed is there another way
Can anyone explain how to properly set up this ARGB stuff? I have a DeepCool LS720 which has the pump and the fans ARGB all daisychained with only one 5v 3pin connector to the motherboard, so I paired it with an Arctic P14 ARGB fan - since my motherboard has only TWO 5v connectors - and the rest of the fans are connected to a Thermalright ARGB hub which is connected to the second ARGB connector of the motherboard. In the SELECT ALL all the effects work simaltaneously but there are pauses betheen some effects like 6 to 16 seconds (during which all the ARGB stuff is off), and if I chose the 1 JARGB and set it and then the 2 JARGB and set it too only the fans ARGB works - the AIO's ARGB goes off.
I have Ant Esports 1100 gaming cabinet that comes with pre installed rainbow fans with molex and 3 pin connector. Currently all fans are connected and powered by a molex connector and they light up and spin. My doubt is what is the 3 pin connector that comes out of each fan. Should I connect it to my Jrainbow headers on my msi mother board
And no - you should not connect it to Jrainbow, Your fans are the FRGB = Fixed RGB - meaning they just light up and spin and you have no other control over them.
hi, do you know if i can change the colors of this motherboard? i have this motherboard and mag coreliquid b240 m and i dont know if i can change the rgb colors of those pieces. help me please
Hii ukk81, that's a great question! Unfortunately the mag coreliquid b240 is not supported in Mystic Light. This setup doesn't appear to make any USB connection back to the board. The FAQ from MSI shows that it defaults to the Rainbow Lighting Effect and that no other color effects are supported (AUTO RGB is what they are calling it). You could swap out the fans for a set that is supported by mystic light (or another vendor) if desired. I hope that helps!! Good luck, keep having fun and thanks for watching!!!
Frustrated - just received a new ibuypower gaming pc yesterday. Initial startup all lights worked in MSI Center/Mystic Light. After I updated windows, drivers, etc. the DRM lights on both cards stopped working. They are recognized by default in MSI Center, but are ghosted out. I can’t figure out how to get them back on… ugh 👨🚒🚒
Is there any motherboard that doesn't just offer pre-made modes in their ARGB software, but where I can also create my own effects? I just bought an Asrock board, and I can't even articulate how much Polychrome Sync sucks. So I want to return the board and get something with decent RGB software where I can create my own effects.
Hi Oozaru85, that's a great question and something that has plagued everybody. In my opinion, all of the RGB software from the major motherboard Manufacturers (Gigabyte, Asrock, MSI and ASUS) is sorely lacking. It all good for basic setups, but nothing too fancy. Asus software is the closest thing I can think of that would give you the ability to creat your owen effects. I agree, Im not a major fan of Polychrome Sync other than basic color changes. Check out Signal RGB, it will work with the motherboard RGB controllers and give you some additional abilities using the CANVAS, but you are not likely to find a full featured softare giving a deep level of control. For that, I'd recommend Corsair Products, from there you can highly customize each LED in your PC. Lian LI and Thermaltake have decent solutions, but I don't love their software either. iCUE is ideal for getting alot of control and even that is far from perfect. That requires an investment of their fans and controllers though. Good Luck and Have Fun!! Thanks for Watching!!
why does msi center say its not working due to not being opened with an administrator account when it is? i cannot utilize mystic light because of this
Have loads of issues with this. Once the SDK updates it causes an issue with Windows Updates on my Z790 MPG Edge have to uninstall. Signal RGB is good but does not really cover what I want. In theory ICUE should work but does not see my board
Hello i have a deepcool ls 720wh and i want to connect the rgb fans from it to deepcool 5v to12 v convertor to my msi z 390 a pro motherboard . Is it possible if i connect the rgb cable coming trough the convertor to "jrgb1" port from my motherboard ?
Not sure if this will help. My DeepCool GAMMAX GTE cpu fan only changes color if I use the sync option. This software doesn’t show a fan selection. Just mobo and ram. My PC was prebuilt by NZXT. It also came with NZXT Cam and same issue.
Hi ThooperHero. That's a great way to sum it up....Simple Yes, if you keep it simple with Mystic Light, it does a decent Job, i'm happy with it for controlling onboard RGB and the onboard Ports, simple....haha. Thanks for watching, Have Fun!!!
MIS Center and Mystic Light are a joke. It is 2024 and they still have problems. I mean constant problems, even after all these years of updates. It is unreal how this company operates.
I love the SignalRGB one but it kept making a dingdong noise. I believe it was my keyboard but couldn't work out why or how to fix it lol. As if it was connecting and disconnecting.
Mystic light is very buggy. I can get it to work, but other days it does not work because the software STK breaks during updates. So what I have done now is buy ARGB splitter. Set this to the 3 pin RGB mount on my motherboard and just use the remote control provided to set the theme I want the colours I want put the remote away and I never have to do anything again no need for software.
Hi JustMyFish, I agree, the software from all the motherboard manufacturers leaves alot to be desired. Are you saying that you are setting the motherboards lights using a remote from another controller by connecting it to an RGB header on your motherboard? Can you give me more details on your setup? Motherboard model, the splitter and remote you used as well as what port you plugged it into. I haven't considered doing that, but if that works, it's brilliant!! Thanks for watching!!!
Hi solomani, you said it....grrrrr! My thoughts exactly!! I can get it to work, but 'flaky' becomes the word of the day....haha. Thanks for watching!!!
@@HardwareArtisan I got it working by doing what you suggested in your other video. Use msi to set the colors, disable auto start on msi, uninstall icue, reboot, reinstall icee and got it all working. See if it’s stable but so far looks good 👍 thanks 🙏
Hi yigitarslanertuna6773, I would start with ensuring your microphone can record sounds, try using sound recorder as a test and make sure it's picking up your voice. If it is, but 'hey lucky' doesn't work and it's enabled. Maybe try re-installing the application. Good luck, have fun and thanks for watching!!!
I did the firmware update. I followed the instructions. Now none of my led lights on the board will come on. I have tried to re scan but I get no options to reload the firmware. This system seems very jank. DO NOT UPGRADE your firmware. I haven't tried the board headers yet, but I'm not hopeful.
if your mystic light isnt picking up your ram , say corsair vengance . you have to download icue & have it running , then mystic light will detect it . still not that good i think. theres only 1 colour scheme that works with your mouse saying that , i cant get signal rgb to detect my ram so i stick with mystic light , but signal rgb is much better.
Right now, I am absolutely *HATING* Mystic Light Sync. I have two sets of fans plugged into 2 JARGB V2 headers (which I guess is what they call JRAINBOW now). I'm not able to change everything individually, as literally all documentation I have read. My four case fans? All four are always doing the exact same thing at the exact same time. My MSI brand cooler? Everything doing the exact same thing. It is literally the single most boring thing. When I choose color ring? All four fans do the exact same thing at the exact same time. If I don't set the 'cycle' much, much lower? There is a _massive_ delay. In my Mystic Light software, both ARGB headers have what looks like the outline of an RGB strip. This software is frustrating, there is no documentation for it, and if this motherboard itself as whole wasn't as good as it is, I'd be pissed about my purchase.
Hi Erick Resendiz, what gpu do you have? If it's another brand, it can be fiddly to get it to show up under mystic light. Try installing the rgb software for that device and then try mystic light. If it's an msi gpu and on the supported list, I'd make sure drivers are up to date and that you have the latest version of mystic light. Just a few things you can try, let me know what you find!! Thanks for watching!!
I hate RGB on PC's. I have 9 fans, 4 memory sticks, cpu cooler,motherboard and corsair rgb water pump and ZERO show up on the msi mystic light screen..they just all do their own rainbow flash with NO WAY TO CONTROL THEM ....ugh
HI moneymaker-xg2oz, ok, ok, fair enough!!! It's adequate if all I ever need to do is change the light on the motherboard, but I can't disagree with your sentiment, haha! Thanks for watching!!
dont buy there junk had asus sent back there software sucks too, update everything and half my lights would not work and motherboard would not detect, git msi and no problem.
I spent almost 3 hours trouble shooting with software and the bios and it turned out to be the off/on switch! Thank you for this video or else I wouldn’t have figured it out!
Thanks for this. I have been in to my computers for many years and i have never been interested in RGB, so my knowledge of how this works with regards to the control of hubs is limited. Building a building a PC for my teenage niece and we are going all out on ARGB so this saved mucking about in manuals and reading loads of guides before buying hub n other bits n bobs.
Thank you so much for this! I just built a computer for my daughter and you saved me hours of time of research and tinkering.
to let CORSAIR ram work 1 you have to go to icue setting / software and games and active software integrations / 2 in MSI center /mystitc light /mystitc light settings /active third party RGB . do system restart . and will work i have on and works find you have to do system restart .. thanks
Hi DRAGONFLY, that’s good information. You do want to ensure that the software integrations is selected in icue as well as the third party RGB setting in mystic light. I had tried that, to no avail. But you got me thinking, I had been using signal RGB on this PC, and I had it starting automatically, I was shutting it down before loading icue and MSI center, but wasn’t working. I did find today that if I prevent signal RGB from ever loading in the first place it now works as expected! Haha. So, if you have signal RGB starting, prevent it from starting and reboot, mystic light will work properly. Perhaps I’ll do a follow up video specific for to Corsair. Thanks for pointing out the steps for Corsair!! Thanks for watching!!
My MSI RGB mouse and keyboards won't show in Mystic Light after an update. I've uninstalled/reinstalled the center but still doesn't show. Anyone have any ideas?
Thanks a lot me, really clear and straight to the point video, helped me a lot
I know you covered mystic light I have had my msi computer for 6 months now but all of the sudden the lights went out and I can't get them to come back any ideas that could help would be awesome
Same help
Mystic Light doesn't show up on my main page, what do I do ?
AntEsport sx3 cabinet comes with argb light and rear mounted argh fan ,
These argb s can be controlled via reset switch(which is conncted to the hub (which is hidden)) but after using Mysctic light to control argb which worked fine
but after turned off mystic light ,reset switch does not control the argb
Dude, I need to thank you. I didn't know how to do that. I want to thank you
Hi i also have the msi mystic light software. i plugged argb fans into a hub then the hub into the argb header on the motherboard. but in mystic light i cant control the fan colors
hi! Did you fix your issue? how about using other 3rd party software?
Mystic light doesn't show up for me, what should I be doing?
same here
same here
I don't know if anyone here still cares about this, but probably can download it with msi center, just an assumption
Could be Mobo compability, fan compatibility (like proprietary fans), or just the software being junk.
I have an issue with one of my AIO fans. The RGB works for the most part but on one of the fans quarter of the fan decides to light up sometimes or not at all in that section. Not sure what is going on
What happens when you start PC after shutdown? Does your color settings apply on power on? Or does it apply only after software starts after Windows starts? Thanks
This is what I’m wondering too
I was able to connect my corsair ram kit's leds to mystic light using icue (corsaire vengeance rgb pro), and make an all sync setup on mystic light (mb : x570 - a pro). The problème is that the rgb stuffs are no longer working as intented, as soon as i turn off my pc. Same story upon starting the PC, rgb are doing their thing, until windows actuallyt lights on and open mystic light, which finally talkes controle again after a good minute.
I would like to know if there anything i can do to make sure my RGB works as intented (according to mytic light configuration) from the moment i start the PC, till i shut it down.
i have an asus prime motherboard just hooked up some rgb lights can i use this software to control my lights?
I don't have that mystic light toggle at the top! I have to open the program separately for some reason and so I can control all together with the mouse and keyboard. So frustrating since its a new MSI computer!
Is there a way to save the RGB light settings so they will run when you're not running windows? ie running, Ubuntu?
Msi rgb software failed to install. And the Microsoft store based application seems not available
Well, do you need an ARGB case fans for this?
im using msi b250m arctic mortar and the msi companion doesnt have mystic light, how to install?
Can u connect a aio cooler and fans on a rbg hub, and would they still work ,or so you need the radiator fans on the aio cooler plugged directly into the motherboard? Because mine do not change color, I have a z490 gaming plus and I plugged the radiator fans into a hub both the power and rgb ,and i did so with another 6 fans but none of them are changing color
Do you know if the Gaming Gen 3 variant has a Jrainbow? I can't find it
I have an Asus Moba, and a MAG MSI C360 liquid, i installed this app but msi center doesn't show me Mystic Light on the pannel, someone has the same issue with moba that is not from msi? thanks alot
did u fix it? i got a Msi b450m-a pro max and it doesnt show to install Mystic Light
i have msi aegis but only 2 things show up on led list JRGB1 and JARGB v2 1 why are the 4 big lights not controllable??? what am i missing? im a computer novice
This "scrapware" does not work on my Z790P-wifi motherboard. If i try to start it from the MSI Center - an endless waiting begins. It shows rotating load icon and nothing happens. Reinstalling of mystic light and the MSI Center does not help. My RGB lights is working with default settings, enabling sleep function when my monitor goes off. But sometimes it cant wake up at all(all RGB is off) or only channel 1 wakes, leave another channel off. Restarting of MSI LED Keeper service can help to reinitialize LED controller and bring my RGB devices alive again.
hi i have a problem, i have a config with an Corsair carbide Spec omega + x2 rgb fans, corsair ddr5 rg, tehrmalright peerless assasin rgb and a 3070ti rgb
The ram + cooler + 3070ti are detected on msi mystic light
But the 2 corsair fans and the spec omega aren't detected
I've tried to instal icue but if i do that the ram are not detected on mystic light but only on icue (and i prefer mystic than icue), the spec omega is detected on icue
But the x2 rgb fan aren't detected on icue too ... They was working before i install icue, the moment i've installed, they turned off the rgb, and i cannot put them ON (nothing detect them), they work but not the rgb
Do you have an idea to fix that ? i've tried to delete icue and msi center but nothing changes...
i update bios on my old b450 tomahawk max II and dragon center and open rgb dosnt detect anything but still work on msi center weird
It worked! Thanks a lot im def giving a like and sub🤙
Mine says waiting for SDK intianlization and doesnt do anything ever just keeps saying that .. When i built my pc few mouths ago they worked for a few weeks then stopped the mystic light page would glitch and not show any rgb or allow me to click on it and now it keeps saying that its initialization im so annyoed is there another way
just installed msi center clicked gamer and theres no option for mystic light??
have you figured it out? I have the same thing
@@ezercomon6659 Never did figure it out super weird
I have a Msi case not motherboard will it work for my case but If it doesn’t what software would work with it my case is a msi mag forge 111r
Can anyone explain how to properly set up this ARGB stuff? I have a DeepCool LS720 which has the pump and the fans ARGB all daisychained with only one 5v 3pin connector to the motherboard, so I paired it with an Arctic P14 ARGB fan - since my motherboard has only TWO 5v connectors - and the rest of the fans are connected to a Thermalright ARGB hub which is connected to the second ARGB connector of the motherboard. In the SELECT ALL all the effects work simaltaneously but there are pauses betheen some effects like 6 to 16 seconds (during which all the ARGB stuff is off), and if I chose the 1 JARGB and set it and then the 2 JARGB and set it too only the fans ARGB works - the AIO's ARGB goes off.
All settled.
I have Ant Esports 1100 gaming cabinet that comes with pre installed rainbow fans with molex and 3 pin connector.
Currently all fans are connected and powered by a molex connector and they light up and spin.
My doubt is what is the 3 pin connector that comes out of each fan.
Should I connect it to my Jrainbow headers on my msi mother board
And no - you should not connect it to Jrainbow, Your fans are the FRGB = Fixed RGB - meaning they just light up and spin and you have no other control over them.
I want to be able to change each individual rgb fans on my pc but I don’t see my fans in my msi center
I uninstalled MSI center and installed Signal RGB clicked under MSI motherboard and reset motherboard and now my lights work like they should lol
hi, do you know if i can change the colors of this motherboard? i have this motherboard and mag coreliquid b240 m and i dont know if i can change the rgb colors of those pieces. help me please
Hii ukk81, that's a great question! Unfortunately the mag coreliquid b240 is not supported in Mystic Light. This setup doesn't appear to make any USB connection back to the board. The FAQ from MSI shows that it defaults to the Rainbow Lighting Effect and that no other color effects are supported (AUTO RGB is what they are calling it). You could swap out the fans for a set that is supported by mystic light (or another vendor) if desired. I hope that helps!!
Good luck, keep having fun and thanks for watching!!!
You can help us ihave problem color mother board change color and case change another color how to faxt
Frustrated - just received a new ibuypower gaming pc yesterday. Initial startup all lights worked in MSI Center/Mystic Light. After I updated windows, drivers, etc. the DRM lights on both cards stopped working. They are recognized by default in MSI Center, but are ghosted out. I can’t figure out how to get them back on… ugh 👨🚒🚒
Will a deepcool lt720 work with Msi mystic light on Argb in motherboard rgb?
It seems that corsair products just don't like working with MSI MBs bc my fans don't show up
Is there any motherboard that doesn't just offer pre-made modes in their ARGB software, but where I can also create my own effects? I just bought an Asrock board, and I can't even articulate how much Polychrome Sync sucks. So I want to return the board and get something with decent RGB software where I can create my own effects.
Hi Oozaru85, that's a great question and something that has plagued everybody. In my opinion, all of the RGB software from the major motherboard Manufacturers (Gigabyte, Asrock, MSI and ASUS) is sorely lacking. It all good for basic setups, but nothing too fancy. Asus software is the closest thing I can think of that would give you the ability to creat your owen effects.
I agree, Im not a major fan of Polychrome Sync other than basic color changes.
Check out Signal RGB, it will work with the motherboard RGB controllers and give you some additional abilities using the CANVAS, but you are not likely to find a full featured softare giving a deep level of control. For that, I'd recommend Corsair Products, from there you can highly customize each LED in your PC. Lian LI and Thermaltake have decent solutions, but I don't love their software either. iCUE is ideal for getting alot of control and even that is far from perfect.
That requires an investment of their fans and controllers though.
Good Luck and Have Fun!! Thanks for Watching!!
why does msi center say its not working due to not being opened with an administrator account when it is? i cannot utilize mystic light because of this
So you can’t stack anything g like static and rain like I do on all other components that’s on Corsair
Have loads of issues with this. Once the SDK updates it causes an issue with Windows Updates on my Z790 MPG Edge have to uninstall. Signal RGB is good but does not really cover what I want. In theory ICUE should work but does not see my board
Hello i have a deepcool ls 720wh and i want to connect the rgb fans from it to deepcool 5v to12 v convertor to my msi z 390 a pro motherboard . Is it possible if i connect the rgb cable coming trough the convertor to "jrgb1" port from my motherboard ?
Not sure if this will help. My DeepCool GAMMAX GTE cpu fan only changes color if I use the sync option. This software doesn’t show a fan selection. Just mobo and ram. My PC was prebuilt by NZXT. It also came with NZXT Cam and same issue.
Signal rgb is work in gigabyte mobo....please reply
I just purchased a computer with the mystic light dash and I don't have a cycle button on mine.
Msi center doesn’t even change the colors for me only way I can change them to to manually press the led button on pc.
same did u ever figure it out
Would anyone recommend this for a B760 gigabyte motherboard. Just wanna ask incase
I´ve got a problem with the app. It makes my pc go to blue screeen, hahaha. But makes that only if I install some apps of the msi center
tyty -- was put off by the recent reviews. I just downloaded MSI Center & ONLY Installed Mystic light -- Simple yes -- though working fine for me !
Hi ThooperHero. That's a great way to sum it up....Simple Yes, if you keep it simple with Mystic Light, it does a decent Job, i'm happy with it for controlling onboard RGB and the onboard Ports, simple....haha. Thanks for watching, Have Fun!!!
Hello , what’s ur mobo name ?
Fans don't show up for me only motherboard and ram
Works 💯with lots of options
is there a away to get a solid light all one colour
Yes, LED - ALL and LED STYLE - Steady. Pick your color and apply (bottom right)
MIS Center and Mystic Light are a joke. It is 2024 and they still have problems. I mean constant problems, even after all these years of updates. It is unreal how this company operates.
doesn't work for me, my 3 fans in the front are constantly lit up in rainbow colors no matter what I set them to
Theres some specific colours that i want my PC to smoothly breath in and out of but i can not work it out! :(
I love the SignalRGB one but it kept making a dingdong noise. I believe it was my keyboard but couldn't work out why or how to fix it lol. As if it was connecting and disconnecting.
« Installation failed »
Same
Mystic light is very buggy. I can get it to work, but other days it does not work because the software STK breaks during updates. So what I have done now is buy ARGB splitter. Set this to the 3 pin RGB mount on my motherboard and just use the remote control provided to set the theme I want the colours I want put the remote away and I never have to do anything again no need for software.
Hi JustMyFish, I agree, the software from all the motherboard manufacturers leaves alot to be desired. Are you saying that you are setting the motherboards lights using a remote from another controller by connecting it to an RGB header on your motherboard? Can you give me more details on your setup? Motherboard model, the splitter and remote you used as well as what port you plugged it into. I haven't considered doing that, but if that works, it's brilliant!!
Thanks for watching!!!
I have the same issue. Msi Centre detects everything except the Corsair vengeance grrr.
Hi solomani, you said it....grrrrr! My thoughts exactly!! I can get it to work, but 'flaky' becomes the word of the day....haha. Thanks for watching!!!
@@HardwareArtisan I got it working by doing what you suggested in your other video. Use msi to set the colors, disable auto start on msi, uninstall icue, reboot, reinstall icee and got it all working. See if it’s stable but so far looks good 👍 thanks 🙏
I am facing the same problem. My corsair - vengeance ram is not showing. Can you please help me with that?
Thank you so much
Brand new computer, and Mystic Lighting does not work. It won't even scan for the fans and RAM that came with the computer.
my rgb isnt working and only the MB shows up in msi center. no jrainbow1 detected. this all started after my kid hit the power button
Tried mystic light and now none of my rgb works. What junk software.
What would you recommend using? I need a better software
@@beanieben6317SignalRGB...It's the best ARGB software available
Bro it works fine for me
Mine too. Worked for a week now I can’t even turn them off.
@@The_Primary_Axiom try SignalRGB or OpenRGB
I am turn on hey lucky but not listen me
What is the reason??
Hi yigitarslanertuna6773, I would start with ensuring your microphone can record sounds, try using sound recorder as a test and make sure it's picking up your voice. If it is, but 'hey lucky' doesn't work and it's enabled. Maybe try re-installing the application. Good luck, have fun and thanks for watching!!!
I did the firmware update. I followed the instructions. Now none of my led lights on the board will come on. I have tried to re scan but I get no options to reload the firmware. This system seems very jank. DO NOT UPGRADE your firmware. I haven't tried the board headers yet, but I'm not hopeful.
if your mystic light isnt picking up your ram , say corsair vengance . you have to download icue & have it running , then mystic light will detect it . still not that good i think. theres only 1 colour scheme that works with your mouse saying that , i cant get signal rgb to detect my ram so i stick with mystic light , but signal rgb is much better.
It's just ok...I much prefer ASRock's software.
Right now, I am absolutely *HATING* Mystic Light Sync. I have two sets of fans plugged into 2 JARGB V2 headers (which I guess is what they call JRAINBOW now). I'm not able to change everything individually, as literally all documentation I have read. My four case fans? All four are always doing the exact same thing at the exact same time. My MSI brand cooler? Everything doing the exact same thing. It is literally the single most boring thing. When I choose color ring? All four fans do the exact same thing at the exact same time. If I don't set the 'cycle' much, much lower? There is a _massive_ delay. In my Mystic Light software, both ARGB headers have what looks like the outline of an RGB strip. This software is frustrating, there is no documentation for it, and if this motherboard itself as whole wasn't as good as it is, I'd be pissed about my purchase.
mystic lights doesn’t even show up for me lol, guess my gpu is not compatible lol
Hi Erick Resendiz, what gpu do you have? If it's another brand, it can be fiddly to get it to show up under mystic light. Try installing the rgb software for that device and then try mystic light. If it's an msi gpu and on the supported list, I'd make sure drivers are up to date and that you have the latest version of mystic light. Just a few things you can try, let me know what you find!! Thanks for watching!!
@@HardwareArtisan I have a MSI GPU and an Asus Board(W11) and I can't get any features on MSI center
Nope my doesent find my devices, i have everything connected to a lian li chassi hub thats connected to my motherboas
I hate RGB on PC's. I have 9 fans, 4 memory sticks, cpu cooler,motherboard and corsair rgb water pump and ZERO show up on the msi mystic light screen..they just all do their own rainbow flash with NO WAY TO CONTROL THEM ....ugh
those stupid cable which goes to the motherboard is loose asf!
w
I can't believe I have to watch a 25 minute video just to change the light on my fucking motherboard...
Hi BassFlapper, I totally get that!!! Hopefully you sped it up to 1.5, got the main point and got outta there, haha! Thanks for watching!!!
@@HardwareArtisan no I didn't think of speeding it up. I'll have to do that next time :p
msi cENER SUCKS! They are gonna make me go back to Asus Hero. This is a pain in the AZZ
ADEQUATE?????? ITS GARBAGE!!!!!!!!!!!!!!!!!
HI moneymaker-xg2oz, ok, ok, fair enough!!! It's adequate if all I ever need to do is change the light on the motherboard, but I can't disagree with your sentiment, haha! Thanks for watching!!
Buy asus
dont buy there junk had asus sent back there software sucks too, update everything and half my lights would not work and motherboard would not detect, git msi and no problem.