I too had fine dust behind the filter, only I checked mine after the first half tank. I switched the o-ring on the shaft that holds the filter from the inside to the outside and it tightens the filter down nice and snug, no more dust. Just need to remember when pulling it off no to lose that little o-ring.
It looks like it's cutting better very cool easy mods, dang those chips, looks like you got the chain sharpening down pat for sure, very neat video wtg
Compression release, chain adjuster no good on my neotec 892. No other problem but the release valve dented the piston and pinched the top ring, had to scrape the bump out of the ring groove to free the ring. Got new Stihl part.
I have the 660. Is that a 32” you have on it? Do you find that the oiler is enough for that size? What fuel/oil mix did you put in now that it’s broken in?
@@Man-Time I bought a set on Amazon and figured I'd try out the 8 pin. My 660 has a 25 inch bar and seems great with the 7 pin but thought I'd try and see. I'd like to buy a dual port muffler next. It's already got two ports in the muffler but one is in the side and the other in the front cover. I see the front covers with two small pipes in front and they look cool and maybe will help with power also. An old man that seems to know his saws built it for me and did the transfers and all that. It's actually a screamer
Yeah that’s what it’s all about. Try it and see what’s up right. It might be awesome. I like to dig the dogs in and let the saw eat. Your style might be different and wood is probably different.
I'm in East TN and cut all kinds of wood. Mostly oak and pine and a lot of wild cherry. Some red cedar as well. I bought a 25 inch bar and think I'll do this muffler mod when I get home from this semi truck. Thanks for making the videos
Use the Stihl HD2 filter and throw the baffle thing out
I too had fine dust behind the filter, only I checked mine after the first half tank. I switched the o-ring on the shaft that holds the filter from the inside to the outside and it tightens the filter down nice and snug, no more dust. Just need to remember when pulling it off no to lose that little o-ring.
Great advice! I’ll have to give that a shot
It looks like it's cutting better very cool easy mods, dang those chips, looks like you got the chain sharpening down pat for sure, very neat video wtg
Compression release, chain adjuster no good on my neotec 892. No other problem but the release valve dented the piston and pinched the top ring, had to scrape the bump out of the ring groove to free the ring. Got new Stihl part.
Yeah I don’t trust the clones of any brand anymore. Thanks for sharing your problems the the neotec!
Get the pro flow poild air filter from Neotec.
I have the 660. Is that a 32” you have on it? Do you find that the oiler is enough for that size? What fuel/oil mix did you put in now that it’s broken in?
It is a 36” and no I didn’t think it got enough oil. Did a video on how to modify the oiler and now it does the job. 40:1 red armor since day 1
The price was right on those mods. I usually chuck that air deflector deal-e-o away - I can't understand what's it there for??
The deflector is a hard stop for the air box and air filter. That way you don’t deform it when tightening down the air box
@@Man-Time I'm running an OEM filter so I've Filed-13 mine and haven't noted any deformation...
I ended up chunking mine and you’re right. No deformation or change. Maybe better sealing but I ran a layer of grease around the sealing surface
Are you still going to build that 660 you got off eBay that turned out to be a clone saw
Oh yeah! It lower on the priority list for sure but it will happen
@@Man-Time fair enough
What tooth rim sprocket would you recommend for a 25 inch bar on the ms660?
I haven’t ran a saw that likes an 8 pin better than a 7.
@@Man-Time I bought a set on Amazon and figured I'd try out the 8 pin. My 660 has a 25 inch bar and seems great with the 7 pin but thought I'd try and see. I'd like to buy a dual port muffler next. It's already got two ports in the muffler but one is in the side and the other in the front cover. I see the front covers with two small pipes in front and they look cool and maybe will help with power also. An old man that seems to know his saws built it for me and did the transfers and all that. It's actually a screamer
Yeah that’s what it’s all about. Try it and see what’s up right. It might be awesome. I like to dig the dogs in and let the saw eat. Your style might be different and wood is probably different.
I'm in East TN and cut all kinds of wood. Mostly oak and pine and a lot of wild cherry. Some red cedar as well. I bought a 25 inch bar and think I'll do this muffler mod when I get home from this semi truck. Thanks for making the videos
Hello tu as aussi des problème s de pompe à huile ?
is this chainsaw still working or already broken?
Yeah it’s still going strong