You love that Ford tailgate it’s a great addition and never gets old. If I ever find an old tailgate I’m gonna steal your idea. It’s a good focal point of your videos. Love it.
That bar squeezer is the first I've seen. Without one, I've considered Putting an old bar on a hard surface and tapping along the bar gently, with a hammer to tighten the groove. I've never done it but ya done got me thinking about getting more life out of them. Great channel, with your episodes educating us in an entertaining way. Thanks!
The tool being used is commonly available for $25 to $80. Pretty neat trick. Thanks for sharing. I never throw a bar Away. I save the really worn out One for dirty jobs like flush cutting tree stumps or root Cutting.
I will probably never do that much work to save a bar and chain but it's the concept that a tough, hard working, honest guy can be so caring and tell a story with passion for the work he does. Friends it's not about the money it's about the love. Lol
I remember your old video on squeezing down bars, and general bar maintenance. After seeing that video the first time I had to go find a bar squeezer. It’s saved me a bunch of money over the years. Thanks as always for great content.
I'm 80 years old and I can tell you from experience. Never, never use your hands as a hammer. They made hammers so you wouldn't do that. Inflammatory arthurites is not fun.
Good stuff! A bar squeezer... sounds like something to squeeze limes for Tequila. I live in Florida, but your folksy tips are helpful ; specially the sharpening part. It's time to sharpen my electric pole saw.
Great content sir. Passing along the old ways is a dying art in a consumption junction throw away society. Thank you for the pro-tips , your positive attitude and cheerful demeanor. Cheers!
I use my tailgate for a work bench, aa well. But it is still on my truck, lol. Awesome work bench. I appreciate the advice with chain size and the bar pincher. Keep bucken!
I've been doing a little bit of tree work for places.That I worked at in the past and I do some sidewalk for cutting trees down for people.And the things that you're teaching me right now is actually helpful more than help.Actually because things I wouldn't have even thought of doing
Thanks Billy Ray. This will make my bar maintenance much more efficient. "Bar Squeezer" sounds like a good nickname for someone 😂. Keep up the knowledge sharing. Lovin it!
Just seeing this video. Praying your Father is doing okay. I never had much of a Dad but I miss my Mom every single day. I wish I had a Father figure like you. Thanks for sharing your knowledge.
"Like" your videos, I've been following a long time. I never had or saw that roller tool,or knew to up size from .050 to .058 to .063. Back 40 years ago, we only had one saw shop, it was 20 miles away, the owner made our chains off a roll, Stihl and Oregon. We just ran what we had, replaced a bar,only when it was bent "Bad". I did learn from experience, to put a chain that was thrown off from trimming small limbs, put chain back on loose, run saw slow, tighten a little, run slow, etc. It would wear off the burred bottom of the chain, back to cutting/work. Be Safe👍
Love you and Logger Wade. Hope to shake hands with both you guys some day. I didn’t have a squeezer so I went down with the old hammer and just gave her some nice in general all along the edge time to write out perfect. I had a bunch of old bars and thought what the hell. You gotta love RUclips! Bless you both back. I’ll let you know when I fire it up in the morning! Lol I remember doing it a long time ago when I was desperate and truthfully forgot about it. I’m no stranger to a chainsaw but it’s like having a good sighted in rifle, when your saws felling good! Lol
It will absolutely cause you to cut at an angle as will a shitty file job. Problem is you can’t trust people like that to give you correct information anymore. People don’t specialize in much these days they are just looking for a paycheck, can’t say I don’t blame them in this economy
I'm going to make a bar roller tomorrow. I have a couple of old bearings that will be perfect. Thanks for the tip. Now I have a tip for you : don't fry bacon naked.😮
I remember seeing one of those bar squeezing tools somewhere and never knew what the heck it was .. but thanks to you buckin i do now nice informative tip 👍
“Already Done, Guy”!!! Buckin’, Ironically I was subscribed to your channel, before Logger Wade’s channel! I heard you do a shout-out and went over there, once I got past the “Accent”! (I’m Cuttah’,from Maine) “Good Peoples is Good Peoples, Wherevah’ you find em’ “!!! Thanks for what you Fellah’s do, keep up the outstanding job, Friends!!!
Thanks for your instruction and wisdom! WE will pray for your fathers health. I always learn so much from your videos. Please keep up doing such good content.
Yessir buckin, ive been wanting to get one of those there tools...looks perty slick❤thank you for sharing your knowledge with us pal😊😊 always willing to learn new tricks💪💪 you rock brother, much love from the Barth family
I've always used my vise to close my bar up some. I've never used one of those bar squeezers. I might have to invest in one. Thanks for the tip. Another good video as always.
Hey, I was throwing old bars away anyway. Why not try to to better with a bar tool I need experience with to use properly. No risk, possible gain makes sense to me. Additionally, the tail gate work bench got a smile from me.
Great video I’ve done lots of bar cleaning and filing but never seen that rig you had for pinching them tighter great idea . I’ve watched logger wade a bit . Man look at where you came from 600 to 516 000 subscribers it says who you are I love hearing what you have to say be safe !! We do love the shout outs everyone does . I’m the same with the glasses I sweet like that as well an they steam up to bad
@@Timberjack.loggers FYI, put one drop of dish soap on the inside surface of each lense of you glasses. Squeegee the soap over the surface of the lenses with your finger. Then buff dry with a lint free cloth or tissue and your lenses will not fog up, reapply down the road. This is what firefighters do to keep their SCBA face piece/mask from fogging up.
Love the tips brother been along time my friend! So glad to see ya and hear your voice buckin! Your the absolute master when it comes to filing and sharpening there’s no doubt about that! I’ll Never forget the first time I heard get the gullet 5 years ago now! As always keep a handle on it brother! 🍀❤️🪓🪓
Thought my 28” bar was slightly bent as it wouldn’t perform in big wood. New chain same result put on new bar then realized just how much slop was in the old one. Off to get some .058. Thanks for the lesson Buckin.
Love what you do! So much knowledge! Wish I had some of it, have a good size dead tree that has fallen over but hung up. It crosses my path out the backyard to my deer stand. Probably a 75° angle just wish I could get it down and not get the saw stuck. It's a good size oak.
Hi Doug here in Ontario .... in my experience I too have never tossed a bar unless it's bent or pinched so bad it looks like a road map of Normandy..... there is always most likely a way to tune it back .
Big fans of ur channel BBR. The wife & I, sister & brother-in-law are are hauling our campers thru Ohio to see you @the Paul Bunyan Show. What days are you going to be there? We maybe only able to make one of the days. Be kind. Jeff splitting logs in the Alabama heat. 😅
Eight swipes on new chain 7/32 and 1/2 swipe on new raker before i go cut. first i debur the rails then i do the sqeeze which creates a dove tail in the groove then i run it on the bar rail dressing table and smooth and square the rails so the side straps have nice place to run on which also gives the drive teeth a new place to run against. thanks billy. built a squeezer off yer pic thanks again!
I built my bar squeezer out of a pair of vice grips two nuts two bolts two skateboard bearings in the 1116 open and box end wrench it's weird looking but it works
Hello Buckin and Hello Members Im so happy to be Part of this Community. By the way....i sell my first big load of Firewood. Like you said Buckin....it take time but it will....passion, patience, hard work, to be honest and always be kind is the secret🥰 A good week to all of you🤗
Billy we want to see you compare round file to square file in different wood. Maybe show exactly how much better a good hand filing can be over stock. It’s what the people want! I always find my saw runs best when the dept gauges are higher. I don’t like a grabby chain and you’ll know when you do a bore cut into a log and she’s jumping
I wished I had known of such a tool 30 years ago. I used to lay my bar on an anvil and peen the gap shut. I usually waited too long to do the tune up, so I always had to square up the top of the bar after peening it to fit the chain. Dad two brothers and I all heated with wood for 30 years or more. Now days I burn shelled corn in a pellet stove. It's much easier on this old man, when I can fill a bulk bin with an auger and use gravity to deliver it to the basement thru a 3 inch PVC pipe.
Bucking, thats a cool tool some feller invented to fix his bars out in the sticks. But ive got a way to improve it into a commercials tool There is a tolerance the blade can ride in the groove right well the center line of the tool has a gage set to stop you from putting too much pinch past the point the blade sits to tight but no more then nessary for each type of chain your using. What would make more since is a bat made with a higher carbon steel that it doesn't bend but more carbon could work harden. There are different levels of hardness of steel by adding carbon to molten metal, that why some metals do not bend like a roll pin or dowl pin its a higher carbon steel thats been heat treated. But the more carbon it gets brittle and can chip easier. Also if the teeth were carbon tipped you could cut metal with them and they would stay sharp longer. But lets say we reinvent the chain saw with carbide insert, a tooth breaks or chips you flip the insert or change it. The bar and chain guides are a tool steel and don't wear out as fast. No more stopping to sharpen a blade. You could use the same blade for months and not have to work on it but it would cost more money to start with. Both the bar and chain. Just keep it oiled and clean. Stainless steel bar and tool steel chain with carbide teeth. That would change the industry.
my tailgate has been sitting around for about 6 months, not anymore, I'll be making a work bench for the barn! Thanks BBRS! Loving your videos as I'm learning something new, I have a Stihl 16 inch for around the ranch, don't laugh I'm 65, grandma of 8 mom of 2 live alone and do what I can! Your tips are saving me money! Can you tell me the best brand chain to buy? 🤠
Lay bar flat on workbench. Gently run right angle grinder with light grit flapper wheel along sides of both rails to remove any burrs and ONLY to remove any burrs. Burrs are the primary reason that the Bar Rail Closing tool leaves an inconsistant width to the bar rail groove. Turn bar over and repeat. Put bar in vise and use Bar Rail Closing tool to close rails in small increments. Check the tightness after each pass with a short piece of BRAND NEW chain (preferably spin up 6 or 8 drive links with no cutters) in the appropriate gauge. When the chain just barely passes freely through the tightest area on the bar, stop. Repeat for other side of bar. Remove bar from vice and place bar rail grinder in vice. Run both sides of bar through grinder until rails are perfectly even. Or find an old Bar Shop somewhere (good luck on that one) and do all that stuff on the Bar Shop. That's what I've been doing for the last 40 or so years after lots of trial and error (took about 17 years) and it seems to work pretty well. I can remember paying just over 30 bucks for a 36" Oregon bar! My income was about the same as now back then too! We used to cut scale when I was young and the wood was a lot bigger too. There, now I'm an author too! LOL
that doesn't work for long, only the top of the kerf is bent in, and the heel of he chain is still sloppy so it will wear out instantly. You can grind down the bar before doing it so that the stock kierf is guiding the bottom of the chain.
Only way I'll scrap a bar is if the sprocket is not replaceable and it's very messed up. Guide rails can be ground flat, de-burred and tightened up quite a few times before the chain starts to bottom out.
Hey Buckin' Billy Ray! Great video as always. Quick question: Something is going on with my oiling system. Stihl farm boss. When I test the oiler by holding the saw up to a piece of wood and running up the RPM, nothing. Oil is everywhere behind the clutch cover however. I checked for leaks by running the saw without the cover. Everything good but the oil just runs everywhere except following the chain to the end of the bar. New bar, no different. Are my chains worn? After watching this video I'm thinking there might be too much slop in the chain groove from worn chains??
Hi there friend. Thanks for the tips, and a question... if a fixed nose sprocket wears a little, and the chain touches the bar nose instead of keep resting on the sprocket teeths...do you recommend some filing to the bar nose, so chain rest in the sprocket again? (Keeping the nose round and smooth) I've no replaceable sprocket, neither nose, and the body of the bar are fine... what should you do in that scenario? Thanks!
❤ That bar squeezer tool.. but it should have a lock on the adjustment.. Work it on and work it off.. Do not adjust while adjusting.. Just my thought.. Ignore it.. 😂
Hi Bucking I’m 74year old and still doing tree work not climbing logging splitting ‘ love it well done sir
Keep it up
I too am 74 years old and I am so thankful I can still run that chain so I enjoy it!👍
I like your wall mounted tail gate that's a good idea .
You love that Ford tailgate it’s a great addition and never gets old. If I ever find an old tailgate I’m gonna steal your idea. It’s a good focal point of your videos. Love it.
That bar squeezer is the first I've seen. Without one, I've considered Putting an old bar on a hard surface and tapping along the bar gently, with a hammer to tighten the groove. I've never done it but ya done got me thinking about getting more life out of them.
Great channel, with your episodes educating us in an entertaining way. Thanks!
that Tailgate workbench is Sick ! 12:10
And, u know... 0:00
The tool being used is commonly available for $25 to
$80. Pretty neat trick. Thanks for sharing. I never throw a bar
Away. I save the really worn out
One for dirty jobs like flush cutting tree stumps or root
Cutting.
I will probably never do that much work to save a bar and chain but it's the concept that a tough, hard working, honest guy can be so caring and tell a story with passion for the work he does. Friends it's not about the money it's about the love. Lol
I really enjoy your videos. My dad passed away last thursday at 85 yeard old. He was still bucking wood at that age. Your video help me get through.
Buckin is one of the guys that helped me with my depression some years ago.
Glad yer here
Sending condolences for yr loss..😢🙏
I remember your old video on squeezing down bars, and general bar maintenance. After seeing that video the first time I had to go find a bar squeezer. It’s saved me a bunch of money over the years. Thanks as always for great content.
Great bar maintenance video! Bars aint cheep. Getting the most life out of one makes very good sense !
I'm 80 years old and I can tell you from experience. Never, never use your hands as a hammer. They made hammers so you wouldn't do that. Inflammatory arthurites is not fun.
I chop sticks in the tree every day and regret it
Thank you for this reminder. I am 34 and I really need to stop using my hands as hammers.
I'm 66 and man do i understand sure hope the younger generation understand and not have to pay for it later
Good stuff! A bar squeezer... sounds like something to squeeze limes for Tequila. I live in Florida, but your folksy tips are helpful ; specially the sharpening part. It's time to sharpen my electric pole saw.
Too late! LOL.
Great content sir. Passing along the old ways is a dying art in a consumption junction throw away society. Thank you for the pro-tips , your positive attitude and cheerful demeanor. Cheers!
All these tips and tricks, keep on rolling. Thanks Buckin
You bet
I use my tailgate for a work bench, aa well. But it is still on my truck, lol.
Awesome work bench.
I appreciate the advice with chain size and the bar pincher.
Keep bucken!
As always great advice Buckin. Thank you. Cheers from HB NZ
I've been doing a little bit of tree work for places.That I worked at in the past and I do some sidewalk for cutting trees down for people.And the things that you're teaching me right now is actually helpful more than help.Actually because things I wouldn't have even thought of doing
Thanks Billy Ray. This will make my bar maintenance much more efficient. "Bar Squeezer" sounds like a good nickname for someone 😂. Keep up the knowledge sharing. Lovin it!
Great video and great information Buckin . Love this video ❤. I Enjoy watching you .
Dang, BBR, I learned a new trick! Thanks! Also, I never imagined that you had parents. I thought you fell out of a tree. :)
Just seeing this video. Praying your Father is doing okay. I never had much of a Dad but I miss my Mom every single day.
I wish I had a Father figure like you. Thanks for sharing your knowledge.
"Like" your videos, I've been following a long time. I never had or saw that roller tool,or knew to up size from .050 to .058 to .063. Back 40 years ago, we only had one saw shop, it was 20 miles away, the owner made our chains off a roll, Stihl and Oregon. We just ran what we had, replaced a bar,only when it was bent "Bad". I did learn from experience, to put a chain that was thrown off from trimming small limbs, put chain back on loose, run saw slow, tighten a little, run slow, etc. It would wear off the burred bottom of the chain, back to cutting/work. Be Safe👍
Love you and Logger Wade. Hope to shake hands with both you guys some day. I didn’t have a squeezer so I went down with the old hammer and just gave her some nice in general all along the edge time to write out perfect. I had a bunch of old bars and thought what the hell. You gotta love RUclips! Bless you both back. I’ll let you know when I fire it up in the morning! Lol I remember doing it a long time ago when I was desperate and truthfully forgot about it. I’m no stranger to a chainsaw but it’s like having a good sighted in rifle, when your saws felling good! Lol
My saw shop said: "If you’re not cutting professionally, chain slop doesn't matter". I call BS and am now looking for a bar roller.
It will absolutely cause you to cut at an angle as will a shitty file job. Problem is you can’t trust people like that to give you correct information anymore. People don’t specialize in much these days they are just looking for a paycheck, can’t say I don’t blame them in this economy
I'm going to make a bar roller tomorrow. I have a couple of old bearings that will be perfect. Thanks for the tip. Now I have a tip for you : don't fry bacon naked.😮
I remember seeing one of those bar squeezing tools somewhere and never knew what the heck it was .. but thanks to you buckin i do now nice informative tip 👍
I joined the channel tonight,been watchin you for years and learned so much!! lv it. Thanks for all the positive videos and atatude its great.
Buckin great show and great advice 👍
Thanks for sharing Johno Darwin NT
“Already Done, Guy”!!! Buckin’, Ironically I was subscribed to your channel, before Logger Wade’s channel! I heard you do a shout-out and went over there, once I got past the “Accent”! (I’m Cuttah’,from Maine) “Good Peoples is Good Peoples, Wherevah’ you find em’ “!!! Thanks for what you Fellah’s do, keep up the outstanding job, Friends!!!
Good bar sharp chain and we are set to go. Nice details on chain and bar maintenance. 👍♥️
Right on
Like the Loggers trick Buckin. I'm always learning on this Channel. Good to see your Dad. Thank you Mathew .
I try
The tailgate on the shop wall is badass
Thanks for your instruction and wisdom! WE will pray for your fathers health. I always learn so much from your videos. Please keep up doing such good content.
Yessir buckin, ive been wanting to get one of those there tools...looks perty slick❤thank you for sharing your knowledge with us pal😊😊 always willing to learn new tricks💪💪 you rock brother, much love from the Barth family
Any time
Long time sub! 1st ever comment. Buckin your videos are so helpful your message is even better. Keep it up love ya Buckin!
Good man comments are always appreciated ♥️♥️
@@martyrutter3630 look forward to meeting you on lives. Where ya from?
@@granthyslop4404 Live in Laurel Delaware. I hope to be at the Bunyan again this year.
@@martyrutter3630 sorry marty, I know you. This was supposed to be for the other guy 😆
And you became a member. Wow ! Thank you . Sincerely
I honestly did not know such a tool existed. Ive tapped with a hammer to close up the channel. Never too old to learn something new.
How might Eric be ??
@BuckinBillyRaySmith rolling out to work. Wheels don't turn I don't earn.
@@EricChmelarskygood man
Outstanding teaching from The Master 🙌
Love you all...❤❤❤
Dr/Lt. Bradley
Our pleasure!
I've learned so much from your videos. Thanks Billy.
Great tips Buckin, thank you!
I've always used my vise to close my bar up some. I've never used one of those bar squeezers. I might have to invest in one. Thanks for the tip. Another good video as always.
Hey, I was throwing old bars away anyway. Why not try to to better with a bar tool I need experience with to use properly. No risk, possible gain makes sense to me. Additionally, the tail gate work bench got a smile from me.
Interesting, always learning something new with buckin😊
🖐
I’m a lady and love watching you. ESP without your shirt. Haha
Great video I’ve done lots of bar cleaning and filing but never seen that rig you had for pinching them tighter great idea . I’ve watched logger wade a bit . Man look at where you came from 600 to 516 000 subscribers it says who you are I love hearing what you have to say be safe !! We do love the shout outs everyone does . I’m the same with the glasses I sweet like that as well an they steam up to bad
Always good to see your name friend. Logger wade is the business
@@Timberjack.loggers
FYI, put one drop of dish soap on the inside surface of each lense of you glasses. Squeegee the soap over the surface of the lenses with your finger. Then buff dry with a lint free cloth or tissue and your lenses will not fog up, reapply down the road. This is what firefighters do to keep their SCBA face piece/mask from fogging up.
@@johndimech8945 I will try that thanks
Love the tips brother been along time my friend! So glad to see ya and hear your voice buckin! Your the absolute master when it comes to filing and sharpening there’s no doubt about that! I’ll Never forget the first time I heard get the gullet 5 years ago now! As always keep a handle on it brother! 🍀❤️🪓🪓
Thought my 28” bar was slightly bent as it wouldn’t perform in big wood. New chain same result put on new bar then realized just how much slop was in the old one. Off to get some .058. Thanks for the lesson Buckin.
Hi Buckin another great video Thanks for the comic relief for bar wear and maintenance - love it WHBH&BK
AKA Liquid sunshine. Thaanks for the tips Buckin greatly appreicated.
Man love that tailgate idea to make a bench out of it.
Great job and great video, i sometimes Draw File my bar just to get it back square and not rounded over
Love what you do! So much knowledge! Wish I had some of it, have a good size dead tree that has fallen over but hung up. It crosses my path out the backyard to my deer stand. Probably a 75° angle just wish I could get it down and not get the saw stuck. It's a good size oak.
Careful brother
Great content! I love seeing you do what you do best! 👍
Hi Doug here in Ontario .... in my experience I too have never tossed a bar unless it's bent or pinched so bad it looks like a road map of Normandy..... there is always most likely a way to tune it back .
Great stuff as usually. Thanks Buckin
That tailgate table is friggin AWESOME!!!
Big fans of ur channel BBR. The wife & I, sister & brother-in-law are are hauling our campers thru Ohio to see you @the Paul Bunyan Show. What days are you going to be there? We maybe only able to make one of the days. Be kind. Jeff splitting logs in the Alabama heat. 😅
The main benefit of dressing bars is to reduce groove depth. Then the bottom of the drive link is in unworn part of the bar.
Eight swipes on new chain 7/32 and 1/2 swipe on new raker before i go cut. first i debur the rails then i do the sqeeze which creates a dove tail in the groove then i run it on the bar rail dressing table and smooth and square the rails so the side straps have nice place to run on which also gives the drive teeth a new place to run against. thanks billy.
built a squeezer off yer pic thanks again!
If your dealer can swedge & grind the rails, even better.
Morning Buckin ! Thats a slick unit you have there ! I’ll be trying an 063 in my fave pioneer bar now after seeing this
You got it
Thank you Billy for sharing brother 🙏😁
Hi bucking love your videos I am going on holiday to Vancouver tomorrow can wait to see your country 👍
Learned me something new today. Thanks Buckin’👍
You bet
Love this content. I always wondered if I should buy one of those tools.
Put dish soap on ur safety glass it helps not fogging up
Like seeing u use that squeezer there eh! I will keep an eye out for one... from New Brunswick keep on bucking
Thank you, this video was a great help.
I just bought some fairly used mcculloch 0.050 bars this is perfect
I learned something good today. I didn't know about such a device. Greetings from Europe!
Good stuff
Good stuff
Thanks for making all the videos.
@0:10 you got a sub just from the intro performance. That's an awesome idea for the tailgate and I'm doing that at my place!
welcome
I never knew there was a tool to tighten the bar!! I dont cut many trees but its good to know!! Thanks!!!
Glad to help
I built my bar squeezer out of a pair of vice grips two nuts two bolts two skateboard bearings in the 1116 open and box end wrench it's weird looking but it works
Hello Buckin and Hello Members
Im so happy to be Part of this Community.
By the way....i sell my first big load of Firewood. Like you said Buckin....it take time but it will....passion, patience, hard work, to be honest and always be kind is the secret🥰
A good week to all of you🤗
Great job
@@BuckinBillyRaySmith thank you sir😉
Billy we want to see you compare round file to square file in different wood. Maybe show exactly how much better a good hand filing can be over stock. It’s what the people want! I always find my saw runs best when the dept gauges are higher. I don’t like a grabby chain and you’ll know when you do a bore cut into a log and she’s jumping
I wished I had known of such a tool 30 years ago. I used to lay my bar on an anvil and peen the gap shut. I usually waited too long to do the tune up, so I always had to square up the top of the bar after peening it to fit the chain.
Dad two brothers and I all heated with wood for 30 years or more. Now days I burn shelled corn in a pellet stove. It's much easier on this old man, when I can fill a bulk bin with an auger and use gravity to deliver it to the basement thru a 3 inch PVC pipe.
Thank you buckens I injoy your videos keep up the good work
Bucking, thats a cool tool some feller invented to fix his bars out in the sticks. But ive got a way to improve it into a commercials tool
There is a tolerance the blade can ride in the groove right well the center line of the tool has a gage set to stop you from putting too much pinch past the point the blade sits to tight but no more then nessary for each type of chain your using.
What would make more since is a bat made with a higher carbon steel that it doesn't bend but more carbon could work harden.
There are different levels of hardness of steel by adding carbon to molten metal, that why some metals do not bend like a roll pin or dowl pin its a higher carbon steel thats been heat treated. But the more carbon it gets brittle and can chip easier. Also if the teeth were carbon tipped you could cut metal with them and they would stay sharp longer. But lets say we reinvent the chain saw with carbide insert, a tooth breaks or chips you flip the insert or change it.
The bar and chain guides are a tool steel and don't wear out as fast.
No more stopping to sharpen a blade. You could use the same blade for months and not have to work on it but it would cost more money to start with. Both the bar and chain. Just keep it oiled and clean. Stainless steel bar and tool steel chain with carbide teeth.
That would change the industry.
they already have carbide chains
my tailgate has been sitting around for about 6 months, not anymore, I'll be making a work bench for the barn! Thanks BBRS! Loving your videos as I'm learning something new, I have a Stihl 16 inch for around the ranch, don't laugh I'm 65, grandma of 8 mom of 2 live alone and do what I can! Your tips are saving me money! Can you tell me the best brand chain to buy? 🤠
Mesh glasses are the best I love them I have used them for quite a while 😊
Lay bar flat on workbench. Gently run right angle grinder with light grit flapper wheel along sides of both rails to remove any burrs and ONLY to remove any burrs. Burrs are the primary reason that the Bar Rail Closing tool leaves an inconsistant width to the bar rail groove. Turn bar over and repeat. Put bar in vise and use Bar Rail Closing tool to close rails in small increments. Check the tightness after each pass with a short piece of BRAND NEW chain (preferably spin up 6 or 8 drive links with no cutters) in the appropriate gauge. When the chain just barely passes freely through the tightest area on the bar, stop. Repeat for other side of bar. Remove bar from vice and place bar rail grinder in vice. Run both sides of bar through grinder until rails are perfectly even. Or find an old Bar Shop somewhere (good luck on that one) and do all that stuff on the Bar Shop.
That's what I've been doing for the last 40 or so years after lots of trial and error (took about 17 years) and it seems to work pretty well. I can remember paying just over 30 bucks for a 36" Oregon bar! My income was about the same as now back then too! We used to cut scale when I was young and the wood was a lot bigger too.
There, now I'm an author too! LOL
that doesn't work for long, only the top of the kerf is bent in, and the heel of he chain is still sloppy so it will wear out instantly. You can grind down the bar before doing it so that the stock kierf is guiding the bottom of the chain.
Only way I'll scrap a bar is if the sprocket is not replaceable and it's very messed up. Guide rails can be ground flat, de-burred and tightened up quite a few times before the chain starts to bottom out.
there was a still dealer near me who had a barshop machine. he could square up rails, close them to spec, and cut groove deeper. miss those old days
Yip
Thank you brother, I learned something new 👍👍
Hey Buckin' Billy Ray! Great video as always. Quick question: Something is going on with my oiling system. Stihl farm boss. When I test the oiler by holding the saw up to a piece of wood and running up the RPM, nothing. Oil is everywhere behind the clutch cover however. I checked for leaks by running the saw without the cover. Everything good but the oil just runs everywhere except following the chain to the end of the bar. New bar, no different. Are my chains worn? After watching this video I'm thinking there might be too much slop in the chain groove from worn chains??
0:20 ... that workbench is best ever!!!!!!!
Hey ol'kid you are just a way good man thanks for your videos my friend!!!
Very informative and well said many thanks
Hi there friend. Thanks for the tips, and a question... if a fixed nose sprocket wears a little, and the chain touches the bar nose instead of keep resting on the sprocket teeths...do you recommend some filing to the bar nose, so chain rest in the sprocket again? (Keeping the nose round and smooth) I've no replaceable sprocket, neither nose, and the body of the bar are fine... what should you do in that scenario? Thanks!
When you change pitch from .058 to .063 do you have to change rim sprocket ?
Greatest work bench ever!
would you consider using a feeler gauge? slide up and down to feel where it needs squeezing and expanding?
I usually get rid of the bars when they start getting flat. (Looking at it from the side.) It is a pain getting the chain tight at that point.
Great old school maintenance tricks!!! Any plans for the P51 under the bench?
❤ That bar squeezer tool..
but it should have a lock on the adjustment..
Work it on and work it off..
Do not adjust while adjusting..
Just my thought..
Ignore it.. 😂
Awesome tool. Is that a bought tool or home made? Is it bearings that roll that are adjustable? Very clever.
Very helpful videos you making thank you for videos
Good day Buckin and friends
How ya doin critter 👋
✌️❤️🌲🪵🪓🐝
@@MATT.MAN-PEACE-LOVE Better today Matt. Man missed yesterday live show had epilepsy act up thanks hope you’re well
@@critterg8493can’t complain man hope you are feeling better today and strength for tomorrow buddy
💪✌️❤️🌲🪵🪓🐝
@@MATT.MAN-PEACE-LOVE I just gotta rest today see what happens that’s life
@@critterg8493Prayers for you my friend for comfort and healing. 🙏♥️
Is the bar squeezer had made or is it commercially available? I Can make those!
Great tips on the bar, thanks!
Do you flat file the bar first? I have seen someone use a snow ski truing device but haven't tried myself.
I have a bar grinder
like that tool bar squeezer, do you or can you build one or send blue prints or know where to get one!..?💯💯💯💯💸
You can purchase them. On the net., look up chainsaw bar rail closer.
Hey Buckin!
What brand of file is your go to?
Love the videos as always!
Howdy Matt!
Oregon
That dude has the coolest job in the world