Это видео недоступно.
Сожалеем об этом.
The ENTINA Tina 2 - Classroom Ready 3D Printer
HTML-код
- Опубликовано: 14 окт 2022
- I'm loving this printer! Check it out:
Entina Website: bit.ly/3T4IR7L
Entina Tina 2: amzn.to/3exW3Tv
Entina Tina 2 Buildplates: amzn.to/3CzIScS
I'll post my own profile once I've got it sorted out.
My Profile: {{PLACEHOLDER}}
In the mean time, you can try out the profile provided in this video…but I no longer recommend it.
• Configuration du Slice...
I have switched to Fat Dragon Gaming profile for Ender 3 and it works beautifully:
www.fatdragong...
Also, here are the start and end codes for Cura. Use 100x120x100 for build size.
START CODE:
;(**** start.gcode for TINA2****)
M104 S150
G28 Z
G28 X Y; Home extruder
G1 X55 Y55 F1000
G1 Z10 F200
G29
G1 Z15 F100
M107 ; Turn off fan
G90 ; Absolute positioning
M82 ; Extruder in absolute mode
M109 S{material_print_temperature_layer_0}
G92 E0 ; Reset extruder position
G1 X90 Y6 Z0.27 F2000
G1 X20 Y6 Z0.27 E15 F1000
G92 E0 ; Reset extruder position
M203 Z5
END CODE:
;(**** end.gcode for TINA2****)
M104 S0
M107
G92 E0 (Reset after prime)
G0 E-1 F300
G1 Z105 F300
G28 X0 Y0
G1 Y90 F1000
M203 Z30
What a wonderful channel! Keep going, because you did not come this far just to come this far. Failure is part of success! Dreaming, inventing, then hoping and dreaming some more in order to keep dreaming that's what keeps you going! Hoping to you all the best and never give up my friend!! I see you very soon and here my full support for you! ❤😊
You have a radio voice bro lol
I got the same printer. the preloaded or downloaded stuff prints really nice. Printing my own models has been tricky, the actual model looks great but the supports are so hard to get off I often chip off parts oof the model, so still experimenting. Ill try wii builder
It was a lot of fun when I had it. One of the printers I wish I had kept when I moved last year. The company has been posting lots of videos on how to use and how to repair / replace parts lately. Be sure to check their RUclips out, too.
amazing vid!
Great Video. Mine came yesterday and i instantly had some problems with the z-axis (made cracking noises) but i was able to fix this. But now i noticed a new (maybe) problem, the print bed is a little bit wobbly, is that normal or should it be tight? 😫
My bed is pretty tight in there, really. So far the only problem I’ve had is with the non-heated bed. You might contact Entina. They were really fast getting back with me when i emailed them. We don’t turn on the heat unless it is very cold and apparently the house is too cold for PLA to stick to the bed.
I have the same printer and for being a “kids printer” I think it works really well. I also have a Flashforge Adventurer 3 and so far I use both. Can I ask for the link for that skull? I would love to print it! Thanks!
Sure, it's made by Jim Overton here on RUclips:. www.crealitycloud.com/user/5021830216
The fat dragon works with this? I dont have mine yet but i want to try and make sure i know what I'm doing so i dont waste any filiment.
I can't actually remember, but I know I used their profiles for most of my printers. Just adjust for build plate. It's been a while!
What cura settings do you use, i find mine to string alot
Great video. I'm completely new this. I just got this printer myself and my first prints turned out much better than yours. Im using Ultimaker Cura though. Maybe that makes a difference? Seems to be more of a quality program than the one you were using. Anyways. I got some good pointers from your video. Thank you
I’m using Cura for several of them, but I think the profile I downloaded was bunk and apparently forces a raft no matter what support I select. I’ve switched to the Fat Dragon Gaming profiles and am getting much better results. I also use those profiles with my Wizmaker. I think next I’m going to try out the profile from CHEP for 5.0. The Fat Dragon Gaming profiles are really fantastic.
could you make a tutorial on how to open the slicer and slice the print and then print it if not that’s okay im just a kid and don’t really understand
This guy does a pretty good job of spring how it's done: ruclips.net/video/kiOeSd9k7IM/видео.html
Hi, just got this printer and video helped alot, was wondering if you got that profile sorted out? for someone reason I cant use the fat dragon profile so im stuck with the one you don't recommend anymore.
Sorry, I don’t have it saved anymore. If you take the start and stop code from the description and follow along with the French video, you’ll be good to go and can make tweaks as you go along.
What filament do you recommend?
The stuff from the big names are going to have better quality control - Anycubic, Elegoo, etc…but I had pretty good luck (especially for test prints) with the cheaper stuff from Luftzeuge. It’s cheap enough and looks good enough that I never felt like I was wasting money on printing out silly stuff.
@@RynoDBones thank you. What gauge is suitable?
@@kirishima638 1.75 is the usual.
@@RynoDBones thanks again