My favorite part of whole vide is end when he says .... “Stock quarter million mile smokey oil ring caked 6 liter swinging 7k making 900 wheel through a auto....its just what dreams are made of” ...... -The Denmah 🤣
@@SloppyMechanics well, to be fair I have two less cylinders and am only running 15psi to an AWD car.... but still. Very impressive. edit: one less cylinder for that pull though.
@@SloppyMechanics I'll be starting my sloppy build soon after I get out of this apartment lease in April. Thinking of doing this same thing but on a 5.3 because I am too poor for a 6.0, but in an FC RX7. I need to find someone to help me with the fab work for the rear end though.
Yeah man, we'd love to see a track visit when he goes. This thing is sick. I liked the v8 volvo swaps even back when it was sbc/JTR conversion, LS and 9 hun at the wheel... Mind blown.. 👀
This combo on ethanol loves it. This one actually gave up early around 25psi 14 deg it stopped gaining 40whp per psi, usually they like 14psi 22deg up top this one only wanted 19
I’ve been casually shopping for a project car (casually because I’m too broke to shop seriously). I literally was just looking at a Volvo wagon for $450. Hmmm......
@sloppy Mechanic: Is that "smoke" coming out at high RPM because the LS motors use low tension piston rings or is this a normal occurrence under boost? Love your vids , keepem' coming!
@@SloppyMechanics fuck, I'm so envious of guys who are out in the garage doing this shit. I'm 39 with a wife & 2 kids and I don't have any time or money to have fun. Someday I hope.
That car would straight destroy people’s dreams where I live. They would take a hit against him in a new mustang or something and take it back to the dealer the next day.
well, if you're within driving distance of allentown pa (depends on what your definition of driving distance is) and you want me to tune whatever you have, you can email into sloppymechanics@gmail.com formally summarizing your project and request to schedule some tuning, at that point since this is not my full time thing and i only do it for fun, i go through the emails when i can, we figure out if its something i can tune, and then if it is something i am interested in tuning, and then we can setup a day *only sunday mornings right now* if all of that criteria can be satisfied and you are still interested then we go ahead and floor the thing
so i hear lol ive been on struggle street with it. im using your base tune with snake eater 160s instead of the 210s. i've had to change everthing to get it anywhere close to drivable. should have just bought the 210s i guess lol
Working on street tuning my first turbo truck. gen 3.5 lq4. 300k miles VS 78/75 SS2 On straight 93 pump. About 12psi right now. Should I go for the 14# 14*?
Steven Fletcher I’d like to know as well. I have my gen3 6.0 on 17 psi. 7875 turbo and makes 711/779. Pretty sure I’m at my limits with this one.3” downpipe.
Yes meaning the entire short block is factory, that is what stock bottom end means, below the heads is all stock, this car also has stock cylinder heads with just cam/springs
its a totally stock longblock with a cam, and springs, never opened, it has stock rings yes, the only other thing it has different is a ls6 car intake to close the hood as the truck one is too tall
im always scheduling, just depends on who, what, if i can or want to, if it works out for both people etc etc. i wrote a reply to someone else with a c10 in these comments so not sure if that was you also, but... like i explained to him i just do this for fun, so i may not be able to cater to everyone but you can email in to sloppymechanics@gmail.com and we can try to set soemthing up
I think all of the 6.0 LS engines will make that kind of power based off of what I've been seeing here. The Gen 4 style rods I believe is the style of rod that is more durable again from my understanding but they came earlier in the 6.0's than the other LS engines just when exactly that happened I'm not sure.
Duncans Garage 04 and up should have the good rods. 04 is a dice roll, if it has 13mm exhaust manifold and lifter valley bolts it's pretty likely to have the gen4 rods
My 6.0 w/ VS Racing 69mm on 12 psi ran a 13.2 in the 1/4 mile LMAO. Tuning myself, I'm guessing idk wtf I'm doing based on my time... 14 degree of timing and 11.1 AFR
It spools up very very slowly, mainly because of my torque converter.. I'm guessing if I could flash it at 3500rpm in boost before taking off, my time might be a lot better
What's your 60'? I have a 4.8 and 76/65 and it gives me 3psi by 2400. Am also learning to tune myself. Cant get out of the hole to save my life, i see my 14psi limit at around 5000ish i think. Nbs silverado so it's heavy, shit 60', ran 15.6 lmao had same setup in a lighter car, different timing, 8psi, 2.3 60', ran 12.5@117.
Rich Halsey very nice car sir. It inspired me to purchase a 1987 740 just last week. I have several questions for you. Did you use an 8.8 with stock control arm position? Did you use the stock hat in the fuel tank? Do you happen to have any build videos because I’m sure I will have dozens more questions as I work on this swap over the winter...
@@benjaminholt4292 Thank you! I built the car initially with the stock control arms but with the drag radials and as the power got higher, it began to rip the bolts out so I installed a custom ladder bar suspension in it. I am using the stock fuel hat. I did modify it with a -8 bulkhead for the feed line though.
Rich Halsey thank you for the response. I found you on Facebook. Sent you a friend request. Hope you don’t mind. My car will have a lower power level. Kind of a “don’t BS me” clone. We will go with stock mounting points to start with. Great to know about the hat as well. My 02 Camaro was a pain. Ended up costing a small fortune because I was not happy with stock plastic...
Because they feel their engine of choice is superior somehow or they just have money to burn or some ridiculous combination of the two. The budget friendly parts is what I think has made me a chevy fan over the years. I've built countless SBC's and now this LS movement has me wanting to jump in and fiddle with it again!
The best part of our hobby is that there's more than one way to the top. It's boring to see the same thing over and over and over again. While no, there's not too many different platforms that respond so well to mods for so cheap, there's plenty of good choices for the non LS people. I am all for anything that makes power. Minus electric cars. They are fast af but have no soul.
I forgot one, thanks to Damien for reminding me. Some people just want to be different. There honestly probably more but I think these are the big ones... And yes Damien it would be really boring if everyone was running a turbo LS
@@zero2583 Yep I just got to that part, thank you. Would still like to know where to get the injectors cheap! I'm poor lol. And if the rings are gapped
@@bloodcamarosexmagik4223 I would get them from Viren at VS Racing. Not worth it to risk knockoffs. they're only $540ish which is cheap for 210lb injectors if you ask me.
My favorite part of whole vide is end when he says ....
“Stock quarter million mile smokey oil ring caked 6 liter swinging 7k making 900 wheel through a auto....its just what dreams are made of” ...... -The Denmah 🤣
Don't need to sell you things that don't work.
And after blowing up the built 5.3!!! 😆
Loving the idle at the seven minute mark thank you Denmah
that is a weird looking redblock
16v swap
That awkward moment when a volvo wagon makes 100whp more then your car with only 7 of it's 8 cylinders working.
On low boost...
@@SloppyMechanics well, to be fair I have two less cylinders and am only running 15psi to an AWD car.... but still. Very impressive.
edit: one less cylinder for that pull though.
@@SloppyMechanics I'll be starting my sloppy build soon after I get out of this apartment lease in April. Thinking of doing this same thing but on a 5.3 because I am too poor for a 6.0, but in an FC RX7. I need to find someone to help me with the fab work for the rear end though.
That would be awesome on the street. Picking on the rich guys new cars they think is fast...
we need a video of this on the mexico streets 😉
im sure he can do that!
@@SloppyMechanics I would love to see his suspension set up too
would love to watch it beat on some blower swap cobras/GT500
thanks for the sharing your knowledge and also putting tunes out there for people to look at. I appreciate it
Rich is raising the 7/9 game to new levels! Well done! Thanks Matt for doing an in depth on this Wagon Mafia beast!
Yeah man, we'd love to see a track visit when he goes. This thing is sick. I liked the v8 volvo swaps even back when it was sbc/JTR conversion, LS and 9 hun at the wheel... Mind blown.. 👀
The stuff dreams are made of... truth.
*loads video*.
*instantly likes*.
*profit*.
The best that ever did it!🖐️✌️
Winamp! It whips the llama's ass!
Me seeing SBE and 26lbs...16°... Instantly crawls down thought provoking worm hole...
This combo on ethanol loves it. This one actually gave up early around 25psi 14 deg it stopped gaining 40whp per psi, usually they like 14psi 22deg up top this one only wanted 19
Sick combo... #VerticalHoodLife
Dyno at the house.. that's dopeness
The 2 dislikes must have been by the guys that got smoked by a Volvo lol
Or EricTheCarGuy's butt buddies!!!
Great video as always!
Built in scramble button minus the button.sloppy scramble button😁👍👍
imagine pulling up alongside this at a Redlight thinking you're fast so you take off and then you hear this 6:37 as the car comes flying pass you
This give me hope for my sbe L77 with a 94mm promod 😄
best volvo eva
Maaaai vot a buuutiful folfo..!!!
Thank You !
You've got some sweat beats on the videos lately.
new retro wave royalty free, i just dislike the silence anymore
You have spelling courses in your fewture.
@@blkmustang007 haha I didn't see that
that's so bloody awesome!
Sick!
Freaking awesome sauce
I’ve been casually shopping for a project car (casually because I’m too broke to shop seriously). I literally was just looking at a Volvo wagon for $450. Hmmm......
Back in my oil change days I would always be thinking damn you could fit a big motor in here on those rwd volvos
I have one, great cars
Hell i used to watch video of a maroon one called Volvette some 10-12 years ago i believe. Wicked car
I remember the volvette. There is a 2jz one accross the pond that spanks people
An older "round headlight" Volvo wagon (or sedan) would actually look good with the right paint, stance and wheels.
Love it!!! 💪
Sounds like he's going to need more (numerically lower) gear to mph. Cool beans.
yeah he will be right on the edge for sure, i went 143 in my truck with 3.73 and 800whp at 3850lb, but with a 28 inch tire.
@@SloppyMechanics 9's eating ice cream. ;)
WOW !
I WANT THAT CAR!....Money maker....
@sloppy Mechanic: Is that "smoke" coming out at high RPM because the LS motors use low tension piston rings or is this a normal occurrence under boost? Love your vids , keepem' coming!
worn out oil rings on high mile motors also caked still with mileage, pretty normal for old motors to smoke on decel
Winamp, damn matt, I didn't know you where that old.
34 this year
@@SloppyMechanics fuck, I'm so envious of guys who are out in the garage doing this shit. I'm 39 with a wife & 2 kids and I don't have any time or money to have fun. Someday I hope.
WINAMP WINAMP
whips the lama's ass
That was their slogan
Don't forget team speak
Any build blogs on this car? I would love to see one on the rear axle install.
Like to know about the build. Any video on it
That car would straight destroy people’s dreams where I live. They would take a hit against him in a new mustang or something and take it back to the dealer the next day.
Jeez that's nuts. How does one request to have you tune my c10 with a sloppy setup.
well, if you're within driving distance of allentown pa (depends on what your definition of driving distance is) and you want me to tune whatever you have, you can email into sloppymechanics@gmail.com formally summarizing your project and request to schedule some tuning, at that point since this is not my full time thing and i only do it for fun, i go through the emails when i can, we figure out if its something i can tune, and then if it is something i am interested in tuning, and then we can setup a day *only sunday mornings right now* if all of that criteria can be satisfied and you are still interested then we go ahead and floor the thing
@@SloppyMechanics very well. Will do.
Just curious if you pushed a aluminum 6.0 to it’s limits? What kind of power did you see?
use Spinright on the harddrive...it will fix it right up :)
How do I see more of this car? I love it.
He’s guna shoot more video since everyone wants it
hooooooooly moly that's gotta be fun to drive. what kind of trans is mated to that monster?
hey Matt do you have any more Holley tunes you can put in the tune cabinet?
not really. don't tune too many of them, super easy to use their software though
so i hear lol ive been on struggle street with it. im using your base tune with snake eater 160s instead of the 210s. i've had to change everthing to get it anywhere close to drivable. should have just bought the 210s i guess lol
twin 450s on e85 @ 900 hp Just wondering how big the lines and feed from the hat!! ??
Iirc it’s all -8 half inch
Automatic liftgate at 4:32...
Hey Matt, what would this combo tap out at on pump gas and the 210s? Not much supply of "E" up here in Alberta
Did he ever take this car to the track ?
Did he change out the fuel line to run the corn or naw?
he swapped the feed to half inch, stock hat and line was a we bit small
Working on street tuning my first turbo truck. gen 3.5 lq4. 300k miles VS 78/75 SS2 On straight 93 pump. About 12psi right now. Should I go for the 14# 14*?
Looking to build one just like it for my Firebird and was wondering the best year 6.0 to use and love your informational vids man 👍🏻🦅🦅🦅🦅
On the sloppy site he says don't be dead set on getting a 6.0, so consider the 4.8 or the 5.3 😁
what brand 3 bar map sensor are you using and is it direct plug in?
EFI source sells one
Hey Matt... I assume Gen 4 bottom end or 3/4 hybrid?
yeah 3.5 like 2005 engine
@@SloppyMechanics cool
Is this a gen 3 LQ4? trying to figure out a safe limit for the rods in my LQ4 swapped S10.
Steven Fletcher I’d like to know as well. I have my gen3 6.0 on 17 psi. 7875 turbo and makes 711/779. Pretty sure I’m at my limits with this one.3” downpipe.
3.5
Can you define SBE please? Factory Pistons / rods too ?
Yes meaning the entire short block is factory, that is what stock bottom end means, below the heads is all stock, this car also has stock cylinder heads with just cam/springs
Are you in PA ? I live beside Harrisburg...
How is there so many views and not that many likes come on guys dont you love power
What would you say it would make if the converter was unlocked?
Usually 10% or less on a tight converter car so like 815?
Sloppy Mechanics ok just curious, thanks!
When you said smokey 6 0 you meant smokey smokey lmao
This ones not even that bad
Great video. What ECU is being ran here?
P59 stock ecu from like 2004-07 Tahoe Silverado etc
A v8 volva!
Would you prefer a Honda?
What is the boost controller set up?
AEM Tru Boost
Is this a gene 3 or 4 motor. Thanks
its a 3.5
Does he still have the exhaust coming through the stock muffler
Yes sir!
@@richhalsey7067 do you have some photos of the ladder bar set up? I want to do something similar to my 940
Rich Halsey I seen this car at the sloppy tuning class we took. did an amazing job with it
@@seaneldridge8206 Thank You!
Oh and are the rings gapped?
never opened
Jesus. 28lbs and unopened. Crazy shit there.
Using Worn out motors has to be a big part of this magic.
@@offroadspecialties7383 Lol yeah they do the opening for you
:O what the fuck...
Stock cam and rings?
its a totally stock longblock with a cam, and springs, never opened, it has stock rings yes, the only other thing it has different is a ls6 car intake to close the hood as the truck one is too tall
@@SloppyMechanics seems she loves the boost in her life
Hey dude I’m in NJ your nearby right are you taking new customers I have a 4.8 C-10 in stock tune
Amazing. .how your setups work. Do you know if this is a Gen 3 or 4 motor?
sar 94 not sure 99 Silverado stuff
On my channel back aways im making an egr delete plug oh and my motor dolly for backyard power washing I have major AADD
im always scheduling, just depends on who, what, if i can or want to, if it works out for both people etc etc.
i wrote a reply to someone else with a c10 in these comments so not sure if that was you also, but... like i explained to him i just do this for fun, so i may not be able to cater to everyone but you can email in to sloppymechanics@gmail.com and we can try to set soemthing up
Sloppy Mechanics I wasn’t sure if did this full time thanks for the comment oh love your channel
What year 6.0 did u say is the one to make the power like that was it the year 03 and up?
I think all of the 6.0 LS engines will make that kind of power based off of what I've been seeing here. The Gen 4 style rods I believe is the style of rod that is more durable again from my understanding but they came earlier in the 6.0's than the other LS engines just when exactly that happened I'm not sure.
Duncans Garage 04 and up should have the good rods. 04 is a dice roll, if it has 13mm exhaust manifold and lifter valley bolts it's pretty likely to have the gen4 rods
Do you know what RPM this beast makes MBT around, per chance? Thanks!
I would have to look probably 4800-5200 as a guess
Thank you for the info man. I’m interested in where Cameron’s Crown Vic eventually sits too. Looking at stall speeds for the converter.
My 6.0 w/ VS Racing 69mm on 12 psi ran a 13.2 in the 1/4 mile LMAO. Tuning myself, I'm guessing idk wtf I'm doing based on my time... 14 degree of timing and 11.1 AFR
Sounds like your turbo is still in the box waiting to get mounted.
I know right lol
It spools up very very slowly, mainly because of my torque converter.. I'm guessing if I could flash it at 3500rpm in boost before taking off, my time might be a lot better
What's your 60'? I have a 4.8 and 76/65 and it gives me 3psi by 2400. Am also learning to tune myself. Cant get out of the hole to save my life, i see my 14psi limit at around 5000ish i think. Nbs silverado so it's heavy, shit 60', ran 15.6 lmao had same setup in a lighter car, different timing, 8psi, 2.3 60', ran 12.5@117.
What does SBE mean?
it means Stock Bottom End
Thanks that makes sense
Is this gen3 or 4
3.5
@@SloppyMechanics does that mean gen4 rods/pistons but 24x? Sorry not sure what you mean.
correct, gen4 is technically a 58x with DOD oiling block, so the gen3 24x with ls2 style floaters is a 3.5. non technically technically
@@SloppyMechanics cool thanks for the reply
What is sbe ?
Stock bottom end
@@SloppyMechanics what does Denmah mean then? 🤪
@@SloppyMechanics ok thanks
@@grabasandwich denmah is sloppy mechanics i believe. The dudes forum name or something
What cam & springs is he using?
LJMS st 2 cam and BTR 660 springs
Rich Halsey very nice car sir. It inspired me to purchase a 1987 740 just last week. I have several questions for you. Did you use an 8.8 with stock control arm position? Did you use the stock hat in the fuel tank? Do you happen to have any build videos because I’m sure I will have dozens more questions as I work on this swap over the winter...
@@benjaminholt4292 Thank you! I built the car initially with the stock control arms but with the drag radials and as the power got higher, it began to rip the bolts out so I installed a custom ladder bar suspension in it. I am using the stock fuel hat. I did modify it with a -8 bulkhead for the feed line though.
Rich Halsey thank you for the response. I found you on Facebook. Sent you a friend request. Hope you don’t mind. My car will have a lower power level. Kind of a “don’t BS me” clone. We will go with stock mounting points to start with. Great to know about the hat as well. My 02 Camaro was a pain. Ended up costing a small fortune because I was not happy with stock plastic...
Passenger blinker fluid looks low
7cyl
makes you wonder why people waste time and money with any other kind of engine?
Because they feel their engine of choice is superior somehow or they just have money to burn or some ridiculous combination of the two. The budget friendly parts is what I think has made me a chevy fan over the years. I've built countless SBC's and now this LS movement has me wanting to jump in and fiddle with it again!
The best part of our hobby is that there's more than one way to the top. It's boring to see the same thing over and over and over again. While no, there's not too many different platforms that respond so well to mods for so cheap, there's plenty of good choices for the non LS people. I am all for anything that makes power. Minus electric cars. They are fast af but have no soul.
I forgot one, thanks to Damien for reminding me. Some people just want to be different. There honestly probably more but I think these are the big ones... And yes Damien it would be really boring if everyone was running a turbo LS
@@justplanefred I currently do in fact run a turbo ls but the car was born with the platform so it's what I stuck with lol.
olov244
I’m cool with everything except for front wheel drive builds. There is not much gayer than a front wheel drive burnout.
Ridiculous and unnecessary. I want it.
This is friggin' awesome. What fuel pump? And where are you guys getting the cheap 210's at?
Dual 450's. He gave all the specs after the dyno pulls
@@zero2583 Yep I just got to that part, thank you. Would still like to know where to get the injectors cheap! I'm poor lol. And if the rings are gapped
@@bloodcamarosexmagik4223 I would get them from Viren at VS Racing. Not worth it to risk knockoffs. they're only $540ish which is cheap for 210lb injectors if you ask me.
unopened longblock, other than cam and springs, buy the 210s from viren unless you are feeling risky
Sleeper... Go make some money and bruse egos...
should've been the redblock or a whiteblock, not this v8 shite ;)