The Biggest Mistake I've Made on the Mazda RX7...
HTML-код
- Опубликовано: 28 авг 2024
- Another 40 steps closer to getting the Mazda Rx7 Running again! So I made a big mistake when I put this 13B together... With the Turblown Studs, we were supposed to add sealant on the sealing washers on the back of the engine... I did not do that. So we have to pull out the Transmission, Pull each nut one at a time, and re-seal all of them...
ATV Hoist (Trans Jack): amzn.to/3XXkVXb
Quick Jacks: amzn.to/3Q62m0V
wobbly sockets to make life easy: amzn.to/44Tlsvn
Selant for washers: amzn.to/3OmsnYv
Tools For The Garage:
Special Oil Funnel: amzn.to/3oeyiCq
Coolant Burping Tank: amzn.to/3iesMfn
3/8" Socket Seet: amzn.to/3uf2dLT
1/4" Socket Set: amzn.to/2XPEd5K
3/8" Impact Gun: amzn.to/3lYfO6q
3/8" Ratcheting Wrench: amzn.to/3ueQNYu
Batteries for those electric tools: amzn.to/3zQE5A5
Floor Jack: amzn.to/39KdE4y
Jack Stands: amzn.to/2WfVWCT
Gucci Screw Driver Set: amzn.to/3EXGTPN
Hook and Pick Set: amzn.to/3kJdeBJ
Still proud of the fact that I mentioned the like button doesn’t turn blue, and you still have to add “whatever color it turns for you” to this day
I'll always say it 😭
Mine turns blue tho.
Mine goes green purple yellow then red and back to white
Mines white
It does change color. Temporarily.
My favorite thing is that you never quit... never get overly angry... always grinding. Love the varied content!
If we quit, they'll never run. We ain't got no choice 😅😅
Yeah... but what kinda fits does Tanner throw off camera? That's what I wanna see.😉
As much as I like my Subies I have to admit that this RX-7 is becoming one of my most favorite builds that I've seen on Smeedia. We had a Nissan Z31 turbo with T-Tops back in the day but I always wanted to try out the #1 competitor to the Z31. Almost purchased an FC twin turbo but the guy still had a lean on the title(this was early 90's) and I was only 16, so that was a no good situation.
Tanner the one man crew! Bummer on the setback, good thing this build can move forward now👍🏼👍🏼
Glad I caught it now, shout out to the speed academy channel because that's how I found out 😅
🥰🥰🥰🥰🥰 in love with this build as a Puertorican 🇵🇷 makes me proud and happy that you have the craft to do this rotary build that most people will put a LS on that beautiful piece of art and ruin it and you keep the 13b alive that’s a pride man 💪🏻🙏🏼
Good stuff…love your content…straight to business…no useless chatter or BS…well done!
We got work to be done 🫡
Big progress on the Rx7. Your timelapses inspired me to start taking my own! Such a vibe with music.
Eyyyy, thank you! And do it! Alqays cool to go back and watch 🔥
Getting closer 🚗💥💨🔥
Very close!
hey at least you found out now rather than later... like with the flat 6
Very true 😅
You should see the even bigger hole in my valve cover gasket on my 05 STI than before I decided "I should replace this just cause it's getting to 100k miles. How hard could it be!?" 2 months later of replacing more and more and more parts and thousands of dollars in and it's just like pouring oil right onto the floor instead.
Oh and don't forget the valve cover bolt I sheered in the head.
Tow truck comes in 30 minutes. What would have been $600 to have professionally done now requires my engine to be pulled plust a good $1k - $3k of work. Nice!
he said small build
he said just enough to make it run again
here we are with amazing content trying to make a big rx7 build XD
I mean it will run again, just with alot more power 😅
Getting so close now. 🔥 Excited to live another of my dream cars through your channel.
12:10 ah dude! That’s because you mounted in Intercooler upside down. Lol, jk. Only way to have the comp housing pointing downwards would be to redo the inlet part of the intercooler. But we’re not doing that. Full send!
Figured as much 😅 all the pics I saw of the IC piping going lower, the intercoolers were all custom 😅
Hell yah man I had surgery and I’ve been craving so car content. Thanks for the video bro
How's the healing process going? 🔥
@@Smeedia terrible lol I’m in tons of pain haha but I appreciate the video man
Awesome job man, youre making the hard stuff look easy!
Thankfully RWD cars are not too bad to drop the trans on 😅
Borg Warner makes a 90 degree compressor cover. Could work well here!
Welding a 90 on the compressor housing might clean things up a bit and be less restrictive than 120deg coupler
I've debated it, I've seen a handful of videos saying not to do it as it puts stress on the compressor housing and can lead to it cracking. I'm not 100% sure on the validity of that though
@@Smeedia Ive had a 90 welded on a few turbos and never had any cracking. Most recent was on my sti time attack car with an efr7163
Which nuts?? Oh yeah, these nuts! You crack me up every time you say it.
Man clean what a clean build and excited to hear the first start up. Good work as always man and on being real about the game of car building. The highs and the lows 🔥🔥
Thank you 🥳 thing is coming out suuuuuuper clean!
OK, some bad news for you. There is no pilot bearing seal. I had to frame-by-frame it at 8:06 to see for sure. Without that the grease for the pilot bearing will go everywhere and it will fail in short order. Atkins will have them. Also don't know if you checked the pilot bearing that is in there or not - if it's in good shape, clean it, grease it up, and let it go. It requires a special tool to remove it. The seal you can easily install yourself with a correct sized socket. But you have to pull everything back apart :(
I can confrim thankfully that those are in there, I remember checking both of them when I had the engine torn down 😁
But if it is bad for some reason (Hoping it is not) at least dropping the trans on this thing is easy enough lol
I have to wonder when we will see a 2JZ project roll in, got the flat 4, flat 6, rotary, next need an i6 build.
Mistakes happen broski, as least it wasn’t started when you caught it
Would have been so much more annoyed if I found it when we started it 😅
Me too. Must be surgery season. Get well soon @aynun1647
Loving the progress! Looking forward to hearing the braps soon!
The braps will be a glorious sound, music 🎶 to the ears
This better be good, I was watching Rob Rom Dahm 12 rotor build! 🤭
I watched that one! Motivated me to get this video shot 😅
12 rotors and atleast 2 turbos? Dahm is crazy.
Love the content man
just drags the trans across the floor...studs and all. theres a certain mechanical fervor appreciated here.
😅😅😅
Get a cast 90 elbow. You will need to cut the compressor housing shorter and weld that cast 90 to it and clock the turbo a little more to get a smoother bend in that hot pipe to match the outlet.
Nice work!!! Quality parts for a Fd are expensive. You will see in the long run thay those parts are neccessary and in the long run save money. Those parts keep the motor happy which equals reliabilty Brap brother
I think you just wanted to do another video, thats why you didn't do the sealant on the first run ;) . We actually recently started printing those instructions out with the shipments. Any RTV that is coolant compatible works FYI. P.S. We are getting you of the first 10 UIMs ( ahead of the production run) so you can progress along !
Can't wait to see it fire up man!!
Sameeee, getting close 🥵🔥
You make me want a project car so bad but I chose to daily drive a sti so project car money isn’t really available 😂
The daily is the project car 😈👀
@@Smeedia but there’s this wrb Fozzy xt in a field 15 minutes from my house that I’m currently building up the courage to go see the owner 😂 but mods for the sti are comming very soon still deciding on a couple parts I’m very picky
Daily driven STI squad 👊
Heyy!! Firstly as always absolutely amazing video! And juust because why not. Random update!! I have to completely gut and rewire my 84 rx7. Because of your vids i will be keeping a 12a in it for now. Hope it goes well!!
Sounds like you've got a fun project ahead 🥳 those 12As can take a beating!
@@Smeedia i hope so cause the 84 it gonna be a show/track car!
Common mistake too. Don't beat yourself up too much, it's almost a Rotary Studding right of passage.
Glad I'm not the only one 😅 only caught it because I saw speed academy video where they did the same thing 😅
Man don't abuse the twig and berries like that. Glad you didn't take them/yourself out there man, made me cringe. Mad props on the progress on the Rx7 she is an 80's babies pin up
Lmao was not expecting that brace to just drop that quick 😅
@@Smeedia personally had that feeling but with a lifted jeep, it don't creep up like Dbow
shes coming along nicely. For the intercooler piping from the turbo, have you thought about moving the intake into the intercooler from coming off the top of it, and clocking it 90 degrees to the left so you feed it from under the air filter? I know it would be a pain in the ass to weld but then you could clock the turbo lower outlet lower and have more room to work.
I did debate it but it just gets so close to the radiator hoses 😅
@@Smeedia yes but then you don't have to worry about hitting the hood and you could always try some funky pretzel looking intercooler pipe work
Tanner you still jdm gob!
Can you move the intake lower? If you can get that filter lower in the v-mount area that would make room for the turbo hot side tubing.
That's as low as it can go with all the shrouding in there 🥲
SOOOOO CLOSEEEEEE🥳🥳🥳
SUPER CLOSE 🫡🔥
BRAAAAAAP
can't wait to hear that baby rip dude! Lookin sexxxy 🥰
Thing is going to make some sweet sweet sounds 🔥🥵
Can you not get one of those mesh turbo cover instead of the filter?
I can but I only use those when I can't run a filter
Tig questions, when welding your bov flange on, what type filler rod did you use, what color tungsten do you use, what do you set your amps to? I have a friend's Lincoln Tig 200 and it will not Tig aluminum for sh*t! I'm not the best Tig welder but I know I'm not this bad. The material is clean, argon is set good, filler rod I got 2 kind I tried, tried 4 colors of tungsten I keep striking out. And I never get the right sound you get either, and yes it's set to ac.
I turn my amps all the way up and just use the foot pedal to control heat. For filler rod, I use 3/32. I'd have to look to see what specifically I have. I've been using the blue tip, but I've seen better results with grey
@@Smeedia first thank you for the reply man! And I will hop on the devils site and order the blue tungsten tonight. Far as the filler rods I got my choices are 4043, and 5356. For the amps that's sort of what I do but I got feet issues so for me it's easier at times to figure out the closest seeing if I can do I can just WOT that bitch and try to start stacking dimes. But that's usually done easier with steel not aluminum I'm finding out. Haven't welded alloy sense high school (2001) and that was using the schools really nice big Miller machine and over 20 years ago so I don't remember the settings and things weren't digital. Lol anyways thanks again for the help!
Instructions unclear, my sub button turned into a sedan.
Silver sedans
You bought something to significantly clean it up? Is it a vacuum cleaner?
I do need a new one, mine died 💀
@@Smeedia I wasn't sure whether to give that one a thumbs up for the comment or a thumbs down for the vac dying.
Do you sell Subarus by chance? Asking from Missoula Montana.
Not necessarily, but o can build you whatever you want 😅
Sorry to bother you man but where you able to free up some time for subiefest cali? If not I understand but if you do go I promise you it's going to be an epic year🎉🎉🎉
Sound know tomorrow 🫡
@@Smeedia❤❤
@@Smeedia If you end up at SoCal Subiefest imma beg you for a Cameo 🤣😅
Nice video
Would you be interested in installing and reviewing our latest T-style head unit that we've designed specifically for the WRX STI 2015-2021? This product is the newest on the market, boasting a style unlike any other aftermarket head units, and bearing similarity to the 2022+ WRX STI. If you're intrigued, we can send you a sample for your evaluation.
Hondabondht or permatex ultra grey. Doing it in the car sounds terrible just pop the motor out
Dropping the trans was easier 😅 the engine such a PIA to get in and out because of how deep the engine bay is. Standard hoists can't reach all the way 😅
@@Smeedia gotta get the harbor freight extendoo
hey man, so im currently flocking the dash in my sti, and i was just curious as to how your dash in the sti has held up after this long?
Still going strong with no issues 🫡
@@Smeedia love to hear it , currently having actual hell trying to get the dash back in🥲
2 minute squad! 😂
GANG
is it just me or did he forget to torque the flywheel bolts
got them torqued and locktited down, had to take the camera out from under the car because there was not enough room with my 1/2" TQ Wrench lol
@@Smeedia THANK GOD
hood exit
2:22
Disengage!!!!
How do you not end up with cut hands or forearms? 😂
I honestly don't know 😅
😎👍🏻👍🏻🔥
TOM!!!!
You can’t go under the turbo
For the piping?
Instead of going over go under. That may help with the hood space
like button turn sedan for anyone else?
My guy get some sleep!!! Relax!!!
I got work to do 😅
FIRSTTT
🥳🥳🥳🥳
Coming together plus parts from 🦘🌏🇦🇺 Cube makes some amazing goods.. Keen to see her running shortly.
Curious brother... Not even being able to start it but with the amazing progress you've made. Would you be willing to sell it? I know your goal is to expand personal knowledge on a variety of cars, I guess secondly what is your one car to rebuild and no amount, would you sell it? With love bro! You're awesome!
I'd like to keep it for a bit but everything has its price. Tbh I'd sell it for $55,000 once all said and done if someone had the cash
@@Smeedia Brother, It's weird that you take time to respond to comments. I truly am grateful you take time to chat with us. I wish you nothing but happiness and love, may your dreams come true!
“Nuts and dick”
🫡
Our original front line workers
😂
😂😂😂😂
I heard "diff" and nothing more
😂😅😂😅