Most of the questions are silly because the answers were right in the video. I don't blame him for not answering them. Also every installation cost is different because of amount of water, pressure (head), amount of labor, trenching, transportation, etc. Did you think it would be cheap to move a big piece of machinery and building materials to a place in the middle of nowhere? Duh!
@sehonggi Hi.... We have only just turned this on full time. The vidio was taken during commissiong and we tested it to just over 20Kw for a short time to make sure everthing was good. The design is 14.9Kw and I hope it will run at that output for many years. Cheers Martin
@sehonggi The length is 800 meter the diameter is mixed just what ever I could get hold of that was not to expensive. 500mm down to 315mm Cheers Martin
I have heard that induction motors could be connected to the grid and used as generators with a prime mover. Like to see the three line diagram and control schematic of this installation. Great job to all involved in this nice hydro unit. Thanks for sharing.
Hi pelton242. you did a good job on this thing. I'd like to build one too. May i know where i can buy this electronic load controller like yours. Your help will be greatlly appreciated. thanks
How is this induction motor generator power? Looks like 3 phase, right? But how was it modified? Normally for this work, a permanent magnet generator is used to generate power. But this is different.
Dear Sir, I am very interested in your hydro power. Now I start to build my own hydro power. I want to know some information from you. 1-Water head 3M 2-flow 1000L/S How many out put it will be?30KV? I like your Turbine very much. Where do you buy it? Thanks
Really guys? Who built it, call me, how much? Go to the freakin company site, which is in the title of the video, and shown several times in the video on the info plate installed on the equipment (Gilkes, if you haven't figured it out). Just looking at this you can tell that this is a very expensive set-up and not well suited for an average homeowner or remote site.
Actually is generated 500,000 kwh so far so its getting better value for money every day, right it was expensive but ultimately it will seem very cheap.
@@pelton242 So that's about 60,000 us dollars worth, over what time and what kind of maintenance is there? My point is that for an average home this might not be worth the trouble. However, I am hoping our next place might be able to install a system suited for our use, which is fairly small. Thank you for responding but I was amazed at the ignorance of some comments and couldn't resist saying something.
Hi, i'm not well knowing about Micro Hydro Generator but i hope someone answer me , i notice that Q about 40L/sec and the head H about 70 meters and the rated power is 14KW , how the mathematic formula works ?
P = n p g Q H P = Power in Watts N = Hydraulic Efficiency (Assume 75%) p = Density of water (1000kg/m³) g = Gravitational constant 9.81 Q = Quantity of water m³/sec H = Head m (160 meter) 95,353w = 0.75 * 1000 * 9.81 * 0.081* 160
Hi Mr Tayyab I'm glad you like this hydro generator. Its been working for about 9 months and has generated 85,000 units of electricity, we are delighted with it. You can contact me at ashfieldfm@aol.com Regards Martin
Good video but I think you need a disclaimer saying: "WARNING you may have an epileptic fit due to the wrong frame rate being used to record the video". 50hz, frame rate wrong. But the video is 8 years old, so let you off lol
Hi, Pelton242, I am very much interested in your hydro power. May I know what is the cost and it can run TV, Refrigerator, Components and fluorescent tube lights?
+Andrew Watts 3kW peak is pretty low. Most people have electric showers, etc. They're easy 7-15 kW. Which makes complete sense when you have free electricity! Why pay for gas or oil heating!
Very nice to see a clean setup with the governor
Most of the questions are silly because the answers were right in the video. I don't blame him for not answering them. Also every installation cost is different because of amount of water, pressure (head), amount of labor, trenching, transportation, etc. Did you think it would be cheap to move a big piece of machinery and building materials to a place in the middle of nowhere? Duh!
@sehonggi Hi.... We have only just turned this on full time. The vidio was taken during commissiong and we tested it to just over 20Kw for a short time to make sure everthing was good. The design is 14.9Kw and I hope it will run at that output for many years.
Cheers
Martin
Can you give me the price this package ( turbine, generator, pvc system.... )...and how to order it ?
Is this still running? What's the price on this full package? and Who do you purchase from? Thanks.
@@holmes1427 this will run forever ! try Gilkes
@@@martinfoster288 whats d price on this?
@sehonggi The length is 800 meter the diameter is mixed just what ever I could get hold of that was not to expensive. 500mm down to 315mm
Cheers Martin
Hi sir.
Good n nice job.
Can you tell me the height ??
Best wishes
That is the cleanest setup I have seen on youtube. Nice job. Is this a package unit ? (pelton wheel, governor, generator?) Who built?
@sehonggi Hi.... yes it is grid tied, it is just a induction motor being pushed.
Cheers Martin
I have heard that induction motors could be connected to the grid and used as generators with a prime mover. Like to see the three line diagram and control schematic of this installation. Great job to all involved in this nice hydro unit.
Thanks for sharing.
@@generatorjohn4537 Not actually got a drawing but its just a 3 phase motor being pushed with some capacitors in line to help power factor. Good Luck
Now THAT is a flywheel!
Nice setup!
good job
Very nice. I like this system. Can you tell me about the price this system ? More details about capacity, velocity and the high of water column.
Awesome system!
Nice...Nice...!
did you have enough water supply for full year electricity production ?
Bonjour, quel est le bruit en décibels.
Svp
Merci
how much price dollar
Don't EVER press the "Fault" button or else you're admitting to your mistakes.
Hi pelton242. you did a good job on this thing. I'd like to build one too. May i know where i can buy this electronic load controller like yours. Your help will be greatlly appreciated. thanks
Pretty nice , but can you tell what is the cost of this system?
what is your drop on this
How is this induction motor generator power? Looks like 3 phase, right? But how was it modified? Normally for this work, a permanent magnet generator is used to generate power. But this is different.
Where is this 🤔🤔
Scotland UK
this genarator was a three phase or single phase??
Super hydro.... ! ;)
very nice......
Really wish I could afford to do something like this and live out in the middle of nowhere. Peace and quit
How much does the full system cost?
What would the total cost be today?
It's can run 4 inches Summersiple I have to build at my home
hi pelton 242
Please how is the hieght of the penstock and how much is the cost ?
Is it still working?
Dear Sir,
I am very interested in your hydro power. Now I start to build my own hydro power. I want to know some information from you.
1-Water head 3M
2-flow 1000L/S
How many out put it will be?30KV?
I like your Turbine very much. Where do you buy it?
Thanks
we also make micro hydro power elc ,.
dhavamanitechnologies@gmail.com
Do you have this turbine's selling link?
wondefull
Really guys? Who built it, call me, how much? Go to the freakin company site, which is in the title of the video, and shown several times in the video on the info plate installed on the equipment (Gilkes, if you haven't figured it out). Just looking at this you can tell that this is a very expensive set-up and not well suited for an average homeowner or remote site.
Actually is generated 500,000 kwh so far so its getting better value for money every day, right it was expensive but ultimately it will seem very cheap.
@@pelton242 So that's about 60,000 us dollars worth, over what time and what kind of maintenance is there? My point is that for an average home this might not be worth the trouble. However, I am hoping our next place might be able to install a system suited for our use, which is fairly small. Thank you for responding but I was amazed at the ignorance of some comments and couldn't resist saying something.
May i know the cost of Altenator
260volts?
I like this. Can design it for me.
How is the cost. Do it for 30 kwt
Hello sir please.please give all details about unit.
What is the AL looking wheel on the other side of the motor
Its a shaft governor used for island mode.
Good
Hi, i'm not well knowing about Micro Hydro Generator but i hope someone answer me , i notice that Q about 40L/sec and the head H about 70 meters and the rated power is 14KW , how the mathematic formula works ?
P = n p g Q H
P = Power in Watts
N = Hydraulic Efficiency (Assume 75%)
p = Density of water (1000kg/m³)
g = Gravitational constant 9.81
Q = Quantity of water m³/sec
H = Head m (160 meter)
95,353w = 0.75 * 1000 * 9.81 * 0.081* 160
👏
Power trong from water 🌧
hi pelton242 good day what is the setup cost please
how many liters per second of water?
Nvm, 40L per second
Very good... I am from Indonesia... How much it's ?
good product,how much price dollar
warum das nicht mehr genutzt wird versteh ich nicht ist das unweltfreundlichste überhaupt
How much head pressure
78m about 8 bar
woooowww cool
i need the price FOB your warehouse CA or WA or if you you have other in the east coast is better.
where can i order the turbine and the generator???
Did you finally order it? How was the experience?
Hi, can it power a welding machine
14.9 kw is more than enough to run a welding machine.
Thanks
merhaba bu santralin toplam fıyatını ögrenebılırmıyım
abb made in Philippines
wtf,you cant read anything on it.You could have wright it down in the description
Hello pelton242 :
This is a great video ! I really like it !
Can you tell me what is inside the silver box ?
Best Regards
Z
electronic load controller would be inside it i believe
Think about it, it's hard for the shafts and coupling.
INFORMACION
Terjemahan ke bahasa indonesia
Hi Mr Tayyab
I'm glad you like this hydro generator. Its been working for about 9 months and has generated 85,000 units of electricity, we are delighted with it. You can contact me at ashfieldfm@aol.com
Regards
Martin
kindly provide contact
Now... Go run a crypto farming operation maaaaaayte
Good video but I think you need a disclaimer saying: "WARNING you may have an epileptic fit due to the wrong frame rate being used to record the video". 50hz, frame rate wrong. But the video is 8 years old, so let you off lol
Sir I want to purchase one hydro power turbine 62.5 kw
So plz contact with me soon as possible
bạn cho biết áp lực nước và tốc độ dòng chảy, chiều cao cột nước để đạt 14.9kw. vui lòng gửi vào email: haquangcao99@gmail.com. cảm ơn bạn.
Can you tell me about the pressure of the water height and velocity to capacity 14.9 kw.Please send to haquangcao99@gmail.com
Hi, Pelton242,
I am very much interested in your hydro power. May I know what is the cost and it can run TV, Refrigerator, Components and fluorescent tube lights?
This thing is outputting 20 killo watts. That is 20 000 watts, you could run 6 to 7 houses with it. ( 3 kw per house on peak)
+Andrew Watts 3kW peak is pretty low. Most people have electric showers, etc. They're easy 7-15 kW. Which makes complete sense when you have free electricity! Why pay for gas or oil heating!