It’s not as slim as the FG Knot..! You can’t cast with the Alberto knot but you can with the FG …. If this guy knew to taper cut the mono and finish wrapped the tapered end,… you can cast it all day long with no hiccups and will not catch through the smallest of guides…! This guy has several channels doing the same knots over and over…. Look at his right thumb,.. there is a very small dark spot behind the thumb nail… this guy is quadruple collecting of more on the same shit…!
One of the best presentations on utube, thank you 🙂 Those knots where the mono doubles back should not go through the guides of the rod, they will affect your cast. FG & SC for the win!
I really dislike all knots that end up having a fluoro tag end sticking out in the direction of casting. Once trimmed, that little piece poking out ends up being hard and catches on the eyelets - if you're casting gently it can completely ruin the cast.
i think u want to pull on the fg after making 1 hitch after the weave the strength in the knot is the braid biting into the mono, not the hitches after
Brother, good morning from Crete, Greece, tell me, I am working with pe 0.3 thread and leader 0.165mm, what knot do you recommend for these cross-sections. And also, in the snap, what knot should I make? Thank you very much, be healthy
I have used the Alberto knot for years and it has served me well but is it a little bulky. I playing with the FG knot and will try it next week on a 4 day charter.
This line is very strong and stretches great when setting the hook or fighting and bringing in the big fish. For the value of the line which isn’t much this is the right line for you if you want to save money and catch fish.
Good point maybe on spinning reel cause of the casting In a pinch I’ve done a triple surgical and it’s worked fine catching whites and strippers a double uni on the moving boat ol line to line Dacron knot works also
I've multiple Q... Why do my braidline breaks from the wired leaderline when i cast the lure!?, what lbs is good for 30-40gms lure?! And does florocarbon leader should be lighter than the mainline?!
For inshore spin fishing, I have never had a failure with a well cinched up 4 x through Surgeons loop. Never once. It must be said in lines 30 pound flouro to 30 pound braid and lighter... Paul v Reenen Originator of Unfair Lures.
Развлечения
Danke!
Thank you 😁
0:01 Alberto
1:56 Albright
3:06 FG
6:32 SC
10:17 Carrot
12:46 Yucatán
14:16 GT
❤❤❤❤❤❤❤❤
Thanks sir
I love them all,but prefer the Alberto.
3:06 FG👌👍
Slick way to tie the FG. You did good. I like it. Thanks
👌👍
my favorite, Yucatan. Great video!
I like the Alberto, slim and strong.
It’s not as slim as the FG Knot..! You can’t cast with the Alberto knot but you can with the FG …. If this guy knew to taper cut the mono and finish wrapped the tapered end,… you can cast it all day long with no hiccups and will not catch through the smallest of guides…!
This guy has several channels doing the same knots over and over…. Look at his right thumb,.. there is a very small dark spot behind the thumb nail… this guy is quadruple collecting of more on the same shit…!
if only my fingers still worked that well!!!! this guy has great dexterity in his fingers!!
One of the best presentations on utube, thank you 🙂
Those knots where the mono doubles back should not go through the guides of the rod, they will affect your cast. FG & SC for the win!
But they do go through
@@jimbo6134exactly, that's his point, lol
And Theo SF jnot?
FG KNOT the best of the best!!!
I haven't seen the FG knot tied that way but I like it.
👌👍
amazing, loved the way you do the FG, thank you
Youre welcome
Un grand merci pour ces superbes connections que j’utilise avec beaucoup de plaisir grâce à toi !!!!😊
I really dislike all knots that end up having a fluoro tag end sticking out in the direction of casting. Once trimmed, that little piece poking out ends up being hard and catches on the eyelets - if you're casting gently it can completely ruin the cast.
I'll definitely choose Alberto and Albright methods. Thank you sifoo
Alberto and albright seems good to me❤ thank you master🙏
Great video of all the knots!
Excellent video, thxs😊
Спасибо! Очень полезное видео!👍
Thank you for the good technique.+1
Ciao da Italia sei numero uno grande
I do a six wrap surgeons knot where I pass the full leader through the loop six times, it's a super easy knot to tie and it's never let me down
Surgeon loop for me 🙌 fast easy and strong
True 😁😁😁😁
Show parabéns aí...
Felicidades Bravo por todo 👍💯
i think u want to pull on the fg after making 1 hitch after the weave
the strength in the knot is the braid biting into the mono, not the hitches after
Always thought alberto is also albright. Now i know better. Thank you.
Thank you senior for sharing your knowledge with us, healthy greetings from Indonesia
You,re welcome brother 👍👍👍
@@BarracudaFishingKnots02BFK 👍👍👍 Tekn's Brother
Albright is good 👍🏻 short and thick! I'm sure it has a nice personality too 🥲
I like the JW knot. ( just wing it.)
Genial 💯
That Yucatan is ultra.
10:17 It's not a carrot-mahin knot. It looks like an alberto knot made with the leader and not the braid. But, why not? I'll try it!
alberto my choice and very strong.. thank you so much
👍👍👍🙏
Cool. You should buy a scale and test strength of each
thanks for the knowledge senior may I know what size PE thread this is
Good job
Brother, good morning from Crete, Greece, tell me, I am working with pe 0.3 thread and leader 0.165mm, what knot do you recommend for these cross-sections. And also, in the snap, what knot should I make? Thank you very much, be healthy
Yucatan 👍🏻
Great!
Fg knot è così lungo e spesso che è ottimo per spaccare l anello del cimino durante un lancio a surfcasting
I have used the Alberto knot for years and it has served me well but is it a little bulky. I playing with the FG knot and will try it next week on a 4 day charter.
FG is very smooth casting.
Интересно 👍
Bacana demais amigo
Твои руки хорошо работают
El numero 4 es algo paresido al fg, mi pregunta es la siguiente, es igual de fuerte?
Elinize sağlık güzel video
💯👋
Alberto is the easiest to tie and yet very thin/compact.
SC is the old Yucatan knot with a rizotto kind of finishing.
3:06 timestamp for the FG
Relix knot❤
Im always using albright because its to simple 😂
Bel video, sarebbe interessante vedere i carichi di rottura e in che occasione è preferibile uno all'altro ❤
👋👋👋👋👋
This line is very strong and stretches great when setting the hook or fighting and bringing in the big fish. For the value of the line which isn’t much this is the right line for you if you want to save money and catch fish.
🔥👍👌🎣
I always a few half hitches on the fg to cover the end of the leader. Doesn’t snag the rod guides
Fg ο καλύτερος κατά τη γνώμη μου
Relix knot nyimak 👀
I use a lot of these knots. But i also fly fish and wonder sometimes why people who use braid dont just make a loop to loop connection.
Good point maybe on spinning reel cause of the casting In a pinch I’ve done a triple surgical and it’s worked fine catching whites and strippers a double uni on the moving boat ol line to line Dacron knot works also
The braid will cut the flouro.
I like brother
Number 4 nice . 8.40 sec
Thats not how I've ever seen anybody tie the Albright knot before.
Nós peferito já vou copiar um já perdi iscas fasendo de qualquer geito
As if double uni knot didn't make the list
What's the best for tai rubber technique
The simple Albright has never failed me yet...
Same goes to me
❤❤❤❤❤❤
❤❤❤❤
🤩
여러영상봤지만 매듭영상의 바이블이다 존나잘묶네진짜
Fg knot nomer one😅
True 😅😅😅
I've multiple Q...
Why do my braidline breaks from the wired leaderline when i cast the lure!?, what lbs is good for 30-40gms lure?! And does florocarbon leader should be lighter than the mainline?!
Sir !..on the Alberto and albright ...how many loops around when im using light line for instance...4lb flouro to 5lb braid...ty 😊
I do 6-8, works fine.
Try 10-16 depending on line diameters
FG. For ever
i take it you do that for a living?...
nice
Thanks omar 😁
👍
🙏
That style FG not time won’t work unless you’re using industrial cable like that as a leader
Why does the SC knot and the Yucatan knot turn out totally different when the knot is tied the same way other then how you finished the SC knot???????
Is this the normal Albright knot or the better one??
It's the better one, improved.
3:59
FG is the best
And Tony Pena?
Muy bien los nudos pero esa musiquita no chinguen
Takes a lot of practice to learn these knots
You left out the Rufus knot :(
Those FG coils were NOT set lmao
La magnesia San pellegrino è più veloce
There is a better way to tie the fg knot
12:30 쓰메끼리 한국산 실화냐?
For inshore spin fishing, I have never had a failure with a well cinched up 4 x through Surgeons loop. Never once.
It must be said in lines 30 pound flouro to 30 pound braid and lighter...
Paul v Reenen
Originator of Unfair Lures.
Agree !
GT is the best, jam knots over chinese finger traps any day 😂
😠😡😡😠😠😡😡😡😂😂😂
That wasn't a correct GT
A GT knot uses a Bimini loop, not a fucking gay uni knot. Video maker is a fucking dumbass. Don’t tie his “GT knot” it’s weak as fuck.
For terminal tackle you can’t beat a double San Diego jam on 60-100lb mono
j knot is better.