If you like the feel of the SS so much go out and find a polymer 80 an give it a whirl ....Im not a fan of the ergos on stock Glocks but the P80 grip module with OEM Glock slide I have runs FANTASTIC and feels SOOO much better than the Glock !
Shawdow more Hype than Bite to me O.G Ijuwt talked about this in my latest video. They cool but Reliability not meeting the quality over all for they they Beautiful design tho!
Bet. I'll check out your video to see what your experience is. I really wanted to like this gun because I planned to buy one buy one but the CR920 Elite.
@@love4gtsandguns I don't own one but I seen at the range the same stuff you experienced and on plenty other videos of the same stuff their just not worth it. I'll get a Glock who their trying to be 🤣🤣🤣.
@Dressed2KillTaye Gotcha. Yeah man, I'm not a fan of Glock so probably will never buy one. I have shot a bunch of them however. That SS felt good in hand and shots felt good (when it worked 😂). Not a big deal, none of them are on the top of my list. 🤷🏾♂️
@@love4gtsandguns Look into S&W New 2.0s. I feel you I Like Glocks never owned 1 shot a few. I'm a Taurus G3/GX4 guy honestly. I shoot them better than any gun I've shot so far except a G17 and that's because the long barrel..
@Dressed2KillTaye Cleary I'm a Sig guy, shoot them better than anything else. My Taurus is cool but mine is tucked away and I honestly never use it... too many other good options. S&W is ok but I've bought and sold 3 of them for different reasons. 👍🏾 I have looked at that 2.0 only because its cheap and an easy add. I need a decent cheap gun to put around the house in my tactical advantage spots.
It's not the Mags them guns high Super Tight Tolerances. Glocks have super Sloppy Tolerances that's what make them what they are and decreases Jamming and malfunctioning. PMag are used in alot of Guns their not at good as OEM Magazines feel wise but trust me Shawdow Systems is just "Not It" out the box requires i MAJOR break in period like 500+ rounds even then people get issues 😂😂😂😂😂😂.
YEP...100% correct ...Im actually on my second MR920...after sending my 1st one back and fourth to warranty services 3 times they finally gave up on my original 1 and sent me a whole new firearm ! This 1 works but /Im able to get through an entire mag without failure BUT its not 100% either ,so at this point its just an expensive range toy because I just don't trust it enough to EDC it! On the other hand I have a Polymer80 with OEM Glock19 slide that runs like a scalded ape an Id trust it with my life [it cost 1/4th or less that the SS] ! SS has GREAT customer service and believe me when its running good it feels GREAT but itll be a couple 1000 rounds w/o hicups before id carry it as my primary EDC tool !
@@cottonmouth71 it's Krazy bro I LOVE S&S but their Quality control damn near worse than Sig Sauer. People Nit honest like you. They try to Defend their Purchase if it has issues just be REAL with yourself. You a G! 🪖🥾🥾💣💣💣💣💣🔥🔥🔥🔥🔥🔥🔥🚀
@@Dressed2KillTaye At this point , i know SO many people that've had the SAME reliability issues as Ive had ...even beyond the BULLSHIT 500 round break in period [that's another touchy subject all together] IMO they need to sit down with the engineer's an redesign the entire firearm ! I THOUGHT the whole point of SS was to take the Glock platform to the next level but I can tell you for a FACT that a plain old stock Glock will NEVER give you problems and/or just flat out FAIL like the SS does AND a stock Glock will run FLAWLESSLY right out of the box without worrying about any bullshit 500 round break in period ! The fanboys are all gonna say ''the tolerances are so tight that's why you gotta break it in ....well if the tolerances are THAT tight then maybe they oughta do the break in at the shop before guys like ME spend WAY to much on a gun that just flat doesn't work the way it should ! Im sorry for the rant but this has been an ongoing issue for me since my purchase and to be honest Im so fuckin tired of it that the thing is just sittin in my safe and every time I look at it I think what a HUGE waste of time & money the whole thing has been !
Girsan All Day. She Bad Bad Bad❤🪖🥾🥾🥂👑💣💣💣💣🔥🔥🔥🔥🚀
Very nice
If you like the feel of the SS so much go out and find a polymer 80 an give it a whirl ....Im not a fan of the ergos on stock Glocks but the P80 grip module with OEM Glock slide I have runs FANTASTIC and feels SOOO much better than the Glock !
I will check that out.
Shawdow more Hype than Bite to me O.G Ijuwt talked about this in my latest video. They cool but Reliability not meeting the quality over all for they they Beautiful design tho!
Bet. I'll check out your video to see what your experience is. I really wanted to like this gun because I planned to buy one buy one but the CR920 Elite.
@@love4gtsandguns I don't own one but I seen at the range the same stuff you experienced and on plenty other videos of the same stuff their just not worth it. I'll get a Glock who their trying to be 🤣🤣🤣.
@Dressed2KillTaye Gotcha. Yeah man, I'm not a fan of Glock so probably will never buy one. I have shot a bunch of them however. That SS felt good in hand and shots felt good (when it worked 😂). Not a big deal, none of them are on the top of my list. 🤷🏾♂️
@@love4gtsandguns Look into S&W New 2.0s. I feel you I Like Glocks never owned 1 shot a few. I'm a Taurus G3/GX4 guy honestly. I shoot them better than any gun I've shot so far except a G17 and that's because the long barrel..
@Dressed2KillTaye Cleary I'm a Sig guy, shoot them better than anything else. My Taurus is cool but mine is tucked away and I honestly never use it... too many other good options. S&W is ok but I've bought and sold 3 of them for different reasons. 👍🏾 I have looked at that 2.0 only because its cheap and an easy add. I need a decent cheap gun to put around the house in my tactical advantage spots.
It's not the Mags them guns high Super Tight Tolerances. Glocks have super Sloppy Tolerances that's what make them what they are and decreases Jamming and malfunctioning. PMag are used in alot of Guns their not at good as OEM Magazines feel wise but trust me Shawdow Systems is just "Not It" out the box requires i MAJOR break in period like 500+ rounds even then people get issues 😂😂😂😂😂😂.
The material of the mags suck and the feed lips may have weakened. 😂 Giving it the benefit of doubt.
@@love4gtsandguns it's been a common problem fam for Year's 🤣🤣🤣🤣
ruclips.net/video/YQbyRa_-pgc/видео.htmlsi=zBVmjCr-S7E4Dq34
YEP...100% correct ...Im actually on my second MR920...after sending my 1st one back and fourth to warranty services 3 times they finally gave up on my original 1 and sent me a whole new firearm !
This 1 works but /Im able to get through an entire mag without failure BUT its not 100% either ,so at this point its just an expensive range toy because I just don't trust it enough to EDC it!
On the other hand I have a Polymer80 with OEM Glock19 slide that runs like a scalded ape an Id trust it with my life [it cost 1/4th or less that the SS] !
SS has GREAT customer service and believe me when its running good it feels GREAT but itll be a couple 1000 rounds w/o hicups before id carry it as my primary EDC tool !
@@cottonmouth71 it's Krazy bro I LOVE S&S but their Quality control damn near worse than Sig Sauer. People Nit honest like you. They try to Defend their Purchase if it has issues just be REAL with yourself. You a G! 🪖🥾🥾💣💣💣💣💣🔥🔥🔥🔥🔥🔥🔥🚀
@@Dressed2KillTaye At this point , i know SO many people that've had the SAME reliability issues as Ive had ...even beyond the BULLSHIT 500 round break in period [that's another touchy subject all together]
IMO they need to sit down with the engineer's an redesign the entire firearm !
I THOUGHT the whole point of SS was to take the Glock platform to the next level but I can tell you for a FACT that a plain old stock Glock will NEVER give you problems and/or just flat out FAIL like the SS does AND a stock Glock will run FLAWLESSLY right out of the box without worrying about any bullshit 500 round break in period !
The fanboys are all gonna say ''the tolerances are so tight that's why you gotta break it in ....well if the tolerances are THAT tight then maybe they oughta do the break in at the shop before guys like ME spend WAY to much on a gun that just flat doesn't work the way it should !
Im sorry for the rant but this has been an ongoing issue for me since my purchase and to be honest Im so fuckin tired of it that the thing is just sittin in my safe and every time I look at it I think what a HUGE waste of time & money the whole thing has been !
Shadow system guns look nice but won’t eat any ammo .. you like me not a Glock guy and I wouldn’t buy shadow system firearms