Audi TT RS / RS3 Spark Plug Replacement | How To | Step-By-Step
HTML-код
- Опубликовано: 6 сен 2024
- Links to all parts used listed below
Super thin wrench set I used - amzn.to/3sLrTmy
Spark plugs I use Brisk Racing- www.urotuning....
Oem spark plugs - www.fcpeuro.co...
Oem coil packs - www.fcpeuro.co...
Permatex anti seize - amzn.to/3PftdFK
Rubber gloves - amzn.to/3ZeP7NS
Torques Wrench - amzn.to/3QRNNP4
Spark Plug Socket with Extension - amzn.to/45tzQex
this is surprisingly like the most clear, instructional, step by step walkthrough ive ever seen on youtube lol. left me with no further questions. thank you so much for putting this up.
Awesome 👌🏼 thank you! Glad it could help
Damn man, massive props on this tutorial!
I have a 2021TTRS that I'm slowly getting more comfortable with doing normal maintenance. Spark plugs are on my list!
Will definitely be following your steps! Appreciate it man!
That's awesome 👌🏼
Thank you for the support 🙏🏼
Everything on here was bang on except on my TTRS the wires behind the coils are bolted to the head, so no need to remove. I could not get the connector at the fill cap to disconnect….
What was wrong with the clip? Were you able to do the job?
@@teejaylc yes got it done. The plug that goes next to the oil filler cap I tried to push down the tab to get it to release and it would not go down. Rather than forcing it and trying to find another plug to replace it I just figured I would work around it.
Fantastic job on your car ! I follow you from France where I have a simpler TTS mk2, with HP pump, injectors, air intake, E85 conversion.. but I’m hardly reaching half of your output 😅
I wish one day I can enjoy enhancing an RS mk3 like yours thanks a lot for inspiration you got a new subscriber
Sorry it might not be the best place for this general comment anyways.. what a sick carbon air intake ! Tremendous look and probably very efficient shape, dynamic air quantity and temperature isolation 👍
Hello 👋
Thank you for the support! The Mk2 is a great car and I love the body style. I'm sure with your mods that are done your still able to have a great time on a drive and that's what it's all about. Keep after it and I appreciate the sub 🙏🏼
Seems simple enough cheers
🤝🏼
Thanks so much this
You're welcome!
I've been told that the connectors to the coils, being plastic, can easily break. I'm not sure if my Audi S1 has the same as yours though.
They can definitely break if your not careful for sure
Good stuff, thanks
No problem!
I need a video showing the replace of the purge valve in the front. Do I need to replace the hoses it doesn’t have any clamps on it.
You still under warranty?
@@teejaylc No.I found part with hoses attached 07k133352g but it’s on back order for a month.P04410,P050700 without engine light but higher then normal rev when start