Falcon F16v5 Part 1: Enclosure Preparation

Поделиться
HTML-код
  • Опубликовано: 28 сен 2024
  • Falcon F16v5 Assembly
    This year I’m adding a new Falcon F16v5 pixel controller to my display.
    In this video we prepare a Cableguard CG enclosure to take a Falcon F16 pixel controller. We drill out holes for cables, we mount a fan in the cover of the CG1500, and we install cable glands and ethernet bladders.
    Parts
    Falcon F16v5 pixel controller
    Enclosure - Cableguard (CG) 1500
    Fan - Redux Noctua 80x80mm, 4 pin PWM, 12V; NOCTUA NF-R8 redux-1800 PWM (purchased from Amazon)
    Bud IPV-1116, Large Air & Moisture Vent
    Meanwell 350LRS-12 (purchased from Holiday Lighting)
    APC Surge Protector for Ethernet Data Port (10/100/1000 Base-T Ethernet lines), ProtectNet (PNET1GB) (Amazon) x2
    Blue Spades Terminals
    12AWG Black Wire
    12AWG Red Wire
    Inline Fuses 12AWG with 20 AMP fuses
    F16 mounting plate and hardware
    PG21 Waterproof Cable Gland x3
    PG13.5 Waterproof Cable Gland x1
    CAT5 Bulkhead Controller Housing Extension Cable x2
    1” vent (Maurice Franklin Louver-1" Round White Polypropylene Plastic Louver with Insect Screen System)
    “Tailpipe” - 2 Way 3/4" 45 Degree Elbow PVC Fitting
    ConnectX female pigtail x15
    Power Cord
    Wire for hanging controller
    Tools
    Phillips screw driver
    Small Flat head screwdriver
    Power Drill/screwdriver
    Assorted drill bits, spades, hole borers
    Wire Cutters
    Crimping Tool (for terminal spades)
    Wire Strippers
    Multimeter
    Magnifying glass

Комментарии • 1

  • @tazo1jd
    @tazo1jd 5 месяцев назад

    Are you using windows 11 ? If So How do i connect to a cat 5 to controllers ? How do i change the adaptor settings For the IP addy?