This was my dream, to put 335d or 330d engine inside my 06 Le Mans Blue M tech 120d. But my country has a shitty law forbidding putting a bigger engines into the same chassis, so i planned to buy 116d in Poland and they do the work (one company these swaps) and provide me clean papers for importing it. But life happens, i am father now and i am driving c class WAGON. But i am not giving up, once i have a budget i'll do it.
Looks like there’s more space in the engine bay than my 130i had with an N52. The 436M’s look good on the E8x. Shame they’re boat anchors because I quite like the design.
So funny you say about boat anchors, as I mentioned a very similar thing to harrison about them as well! But defo suit the car & the engine looks like it should be there from factory 💪
@@wds_originals they’re a good looking wheel but so god damn heavy. I thought they suited my M140i well but I seemed to be in the minority because most other owners hated them. The channel that collects dirt did my head in though. 😂
@@samcourt6228 your not wrong, and I would also agree if I owned this car but it’s Harrison’s & his preference, they certainly look the part on this 130d imo! 👍
Hy, do you have wiring diagram? I swap e81 118d n47d20c 2010 with bmw 325d m57tu2 2008. the engine runs, however, not from the injection, I think there is something wrong with the cables, also because the control unit doesn't indicate the accelerator.
hi there great swap can you help me here please? I have an e92 320d n47 same as you did and I have m57 from e60 2003 cast iron block, what engine mounting brackets should i use please, yours is not the m57n with the aluminium block right?
Personally I’m not a fan of 2 posters, and due to the layout in my garage this is perfect for me. It’s very good, I can supply these ramps if you’re in the UK. Feel free to have a look on the website Wdsoriginals.com
Hello, I have a bmw 120d with a broken engine, I have a m57d30 218km engine with e60, what engine mounts did you use? What is the gearbox from which car? Please help :)
@@wisniae36vlog95 ok so your engine should be m57n2 which has an aluminum block and you use the bracket mounts from an e9x, I have an e60 m57n which has a steel block, someone knows if they still match please?
This car was built on a budget, easily doable for £0 if you buy a donor car & sell the bits of donor car, or if you buy engine on pallet £1000 - £1500 if you do all the labour yourself. 👍
Question. Are you having negative camber issues at the left front wheel of the car? At 1:39 I could see the strut tower is slightly damaged/bent (If you look at the nuts holding the top mount the studs are not equal to each other). Im asking because I have this same exact issue and am trying to really narrow it down to this actually being the cause of the negative camber problem.
How did you handle the wiring? Were the looms plug and play and how about the ECU pins? This is a project I'm very interested in as I've got a mechanically spot on 1 series and a rotted out 330d
Luke, as with anything it’s doable, but time effort & perseverance is required, honestly wiring wasn’t too bad to get it running and driving, but if you want full abs functionality and certain other bits it would require more wiring & studying. All depends on donor car, and what age of 1 series you have, as there’s various different ecu/wiring options along the years. Hence why I didn’t show wiring in this video as I don’t want others to copy it and it be incorrect for there car! 👍
I’m afraid I don’t build cars for others, this was a good friend of mines car he needed a little hand with and somewhere to do it. Thanks for the interest though 👍
How long did you build on this car? I thought, it would be a lot harder to swap from four cylinder to a six cylinder engine. And how long was the preparing phase?
Blown up and built all in the same month, actual build time less than a week labour, parts and delays with building another car at the same time (Alpina D3 M57) accounted for the total build time. Very easy swap buddy 👍
Thanks, I have an e82 with the N47 engine. It's a shame they didn't make a 3L engine in the 1 series. I plan to swap my engine next year, I would take the N57 from the 330d or 530d. I just have my doubts about what all I need to swap. Engine unit, ABS, dashboard, etc?
@@fabianmangold664 get yourself in the m57 swap pages on Facebook, these engines are very simple & have been swapped into multiple chassis including Ford transits, Land Rover defenders, pajero’s and all sorts, anything’s doable with the correct research my friend 💪
This was my dream, to put 335d or 330d engine inside my 06 Le Mans Blue M tech 120d. But my country has a shitty law forbidding putting a bigger engines into the same chassis, so i planned to buy 116d in Poland and they do the work (one company these swaps) and provide me clean papers for importing it. But life happens, i am father now and i am driving c class WAGON. But i am not giving up, once i have a budget i'll do it.
My mate has 135d manual
@@DuBstep115where did he build it. Please tell him to post a video here tag me
@@jeffderschwatzer4560 Sorry, it was 130d making 500hp watch?v=FejJ59QDUZw
Swapping it to a 120d is alot more work, you need to have a 123d because whole driveline and gearbox etc is the same as 330d
Can you please share any info for Polish company that can provide that service...I'm interested of making that swap...
Weapon, with the BBK too!
That’s my dream! I have 120d but with m57 it will be a great car! But expensive procedure
should have corner weighted the car before and after. would hve been interesting to see the weight gain and balance of the car 😀
Awesome job what engine mounts,front subframe did you use?
Do you used any immo emulator?
No?
What propshaft/gearbox did you use?
Did you have to change the front slam panel? And apart from engine what else is needed?
Looks like there’s more space in the engine bay than my 130i had with an N52.
The 436M’s look good on the E8x. Shame they’re boat anchors because I quite like the design.
So funny you say about boat anchors, as I mentioned a very similar thing to harrison about them as well! But defo suit the car & the engine looks like it should be there from factory 💪
@@wds_originals they’re a good looking wheel but so god damn heavy. I thought they suited my M140i well but I seemed to be in the minority because most other owners hated them. The channel that collects dirt did my head in though. 😂
@@samcourt6228 your not wrong, and I would also agree if I owned this car but it’s Harrison’s & his preference, they certainly look the part on this 130d imo! 👍
@@wds_originals they do look good….my favourite wheel on the E81/7 though is the 216 but I am biased having had a 130 LE.
I like the original 208M's. They look good if they are refurbed Shadow Chrome like the E39 M3 Color.
Hy, do you have wiring diagram? I swap e81 118d n47d20c 2010 with bmw 325d m57tu2 2008. the engine runs, however, not from the injection, I think there is something wrong with the cables, also because the control unit doesn't indicate the accelerator.
Have you sorted this issue? I got same problem
Did you made car runing?
Beautiful 🤩
Hi when you got the shaft cut and joined did you have to get it balanced ?
Just hope you do a pdf file about the wiring
I'm about to build the same car.....what engine arm did you use....what did you do for the prop shaft donut use m57 one or does stock 120d work
Great, can you also help with tips on swapping m47 into 118i
hi there great swap can you help me here please? I have an e92 320d n47 same as you did and I have m57 from e60 2003 cast iron block, what engine mounting brackets should i use please, yours is not the m57n with the aluminium block right?
Salut le swap est il possible avec un moteur de 530d 218cv ?
ECU and all the stuff must be also swapped. What's with the wires work??
Where do u boys get the wiring loom from
Hello - lease make a video for us on the Wiring Harness conversion from Engine to the Chassis Wiring harness
Which engine brackets didn’t use mate?
Hi quick question was this engine from a e90 or e53
Did you use the original gearbox and rear diff sett up
Please help, what engine arms?
Hi do you offer these as a conversion? Looking for someone to put an m57 into a e82.
Hi there i got a 2003 m57 euro5 and i also got 2012 f20 whats the chances of getting it starting in that do u think.
What wire did you connect to get the tachometer work? :)
How do you find the lift? Don't know if you go for one of yours or a 2 post
Personally I’m not a fan of 2 posters, and due to the layout in my garage this is perfect for me. It’s very good, I can supply these ramps if you’re in the UK.
Feel free to have a look on the website
Wdsoriginals.com
did you use a M57D30TÜ2 as they are made from aluminium so lighter and better handling?
Yes that is correct, we did indeed 👍
What make/model is the vehicle lift?
Hello, nice swap well done. What's gearbox did you use?
E9x 330d box 👍
Can this engine fit in a 316d 2010 e90?
Yes, but you’d be better off just buying a 330d
I’m looking at doing the same, is it on stock drive shaft and subframe? Thanks
Prop was custom made, and 1 series subframe yes 👍
@@wds_originals could you tell me where you got the prop made by any chance?
@@georgefitzpatrick1272 Heathrow prop shaft services 👍
What did you do for the prop shaft?
Heathrow prop shaft services made a custom prop, 330d front half 320d rear half with length change.
@@wds_originals how much did that cost you
@@logic128 £150ish from memory
Hey what differential do you used
Stock 2.0d Diff, the ratio’s are very similar 👍
Hello, I have a bmw 120d with a broken engine, I have a m57d30 218km engine with e60, what engine mounts did you use? What is the gearbox from which car? Please help :)
Full M57 engine and running gear including mounts from an e91 330d 👍
what year is the e60?
@@MrDwa22Kapitlu13 2005
@@wisniae36vlog95 ok so your engine should be m57n2 which has an aluminum block and you use the bracket mounts from an e9x, I have an e60 m57n which has a steel block, someone knows if they still match please?
Did you have to swap over to the m57 ecu?
Yes, coding needs to be done to write the m57 ecu with the 1 series modules etc too 👍
Diesel power !!!!!!!!! SUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!
Hello! What engine mounts did you use?
E90 330d mounts 👍
@@wds_originals Thank you for answer :) Do you also have the electric servo on the 1-serie? how did you do the servo pump on engine? :)
How much would the whole project cost rough estimate?
This car was built on a budget, easily doable for £0 if you buy a donor car & sell the bits of donor car, or if you buy engine on pallet £1000 - £1500 if you do all the labour yourself. 👍
@@wds_originals was curious to know, thank you
How much HP can the M57 engine handle tho
All depends on supporting mods etc, they have been know to push 600hp plus, but that’s with some work 👍
We have in Romania 1024hp 1600nm . search CompleteChip Iasi ( 1 series ) . 8.3s 1/4mile !!
As much as you have the money. There is no fixed limit.
Question. Are you having negative camber issues at the left front wheel of the car? At 1:39 I could see the strut tower is slightly damaged/bent (If you look at the nuts holding the top mount the studs are not equal to each other). Im asking because I have this same exact issue and am trying to really narrow it down to this actually being the cause of the negative camber problem.
The car was a friend of mines who borrowed my workshop/facilities and knowledge, I can’t say I noticed and he has since sold the car. Sorry
@@wds_originals welp. Really appreciate the reply anyway! Bit concerning tho to see this on more e81/87. Thought it was only an e36 issue.
How much does it cost?
This car will be for sale soon….
@_harisonnnn on insta, his car not mine 👍
What where the costs of this build i want to do this to
How did you handle the wiring? Were the looms plug and play and how about the ECU pins? This is a project I'm very interested in as I've got a mechanically spot on 1 series and a rotted out 330d
Luke, as with anything it’s doable, but time effort & perseverance is required, honestly wiring wasn’t too bad to get it running and driving, but if you want full abs functionality and certain other bits it would require more wiring & studying. All depends on donor car, and what age of 1 series you have, as there’s various different ecu/wiring options along the years. Hence why I didn’t show wiring in this video as I don’t want others to copy it and it be incorrect for there car! 👍
there are few projects around the web, is it possible to convert it to xdrive?
Anything is doable with the right connections and deep pockets buddy
@@wds_originals Usually the problem is can you fit it without cutting anything thus making it illegal to register
How much would u charge to do this for someone else
I’m afraid I don’t build cars for others, this was a good friend of mines car he needed a little hand with and somewhere to do it. Thanks for the interest though 👍
How long did you build on this car? I thought, it would be a lot harder to swap from four cylinder to a six cylinder engine. And how long was the preparing phase?
Blown up and built all in the same month, actual build time less than a week labour, parts and delays with building another car at the same time (Alpina D3 M57) accounted for the total build time. Very easy swap buddy 👍
Thanks, I have an e82 with the N47 engine. It's a shame they didn't make a 3L engine in the 1 series. I plan to swap my engine next year, I would take the N57 from the 330d or 530d. I just have my doubts about what all I need to swap. Engine unit, ABS, dashboard, etc?
@@fabianmangold664 get yourself in the m57 swap pages on Facebook, these engines are very simple & have been swapped into multiple chassis including Ford transits, Land Rover defenders, pajero’s and all sorts, anything’s doable with the correct research my friend 💪
What engine brackets did you use? I know you weren't able to show that but was it just bmw engine arms and mounts? I am assuming also 330d box used?
@@fabianmangold664 use m57 my friend, N57 is super expensive and not as strong as M57
Pure evil
Hi this is exactly what I want to do can u do it for me pls lol u have an email or anything to enquire?
I’m afraid I don’t build cars for other people, thank you for your interest but this is not something I offer I’m afraid.
Did you use the rear diff from the m57 engine
No, the 120d diff ratio was very similar to the m57 diff so had a custom prop made and job done 👍