Most informational how to do it, I changed my audi A6 1.8T Quattro fuel pumb and did everyhing exactly how you did it and worked perfectly. That wrench idea brilliant!!! worked like a charm. Thank you for this tutorial!!!!
Sorry for the misunderstanding, I just said electrical tape as one type of tape you could use but ideally you can use whatever tape you wish. However the main point is only to protect the rubber hoses from tearing or getting damaged against the hard metal surface of the pliers. It's not for any other electrical related issue. Hope this helps! Thanks for your comment!
As long as the hum sounds like an normal electric motor then it's normal. However, if it sounds abnormally loud even if the seat installed then it could be a faulty pump.
i have replaced a fuel pump on my audi a6 c5 2.8 quattro. I used the same kind of clamps as yours , have replaced the plastic fuel pressure hose as well but it's losing the fuel pressure still. the problem is the clamps, i have used several ones but still no result... any help ?
Make sure you are using the correct size clamps for the fuel line and that the clamps are seated properly on the hose so you have no leaks. Were you getting good pressure before your fuel pump died?
I had about a quarter tank of fuel in my car and I wish I had less in it. Wear some nitrile gloves to keep your hands dry. Any more gas and you'll be splashing it all over the place.
For Anyone Looking for this.....
Fuel Pump removal tool for Audi, VW, Mercedes, BMW, and Chrysler : amzn.to/37xC6q3
Your shot of the wiring plugs just saved me hours of headache. Thank you!
Glad this video helped you! I appreciate your comment 👍
Most informational how to do it, I changed my audi A6 1.8T Quattro fuel pumb and did everyhing exactly how you did it and worked perfectly. That wrench idea brilliant!!! worked like a charm. Thank you for this tutorial!!!!
This is the best video of someone working on this car
The wrenches crossed like that worked perfectly
I have a question if you disconnected the battery why do you put electrical tape on the pliers
Sorry for the misunderstanding, I just said electrical tape as one type of tape you could use but ideally you can use whatever tape you wish. However the main point is only to protect the rubber hoses from tearing or getting damaged against the hard metal surface of the pliers. It's not for any other electrical related issue. Hope this helps!
Thanks for your comment!
Helló guys! And what is under the right black plastic?
Hey is the pump supposed to hum and whine like that? Cause my car does that… thoughtI needed a new pump
As long as the hum sounds like an normal electric motor then it's normal. However, if it sounds abnormally loud even if the seat installed then it could be a faulty pump.
i have replaced a fuel pump on my audi a6 c5 2.8 quattro. I used the same kind of clamps as yours , have replaced the plastic fuel pressure hose as well but it's losing the fuel pressure still. the problem is the clamps, i have used several ones but still no result... any help ?
Make sure you are using the correct size clamps for the fuel line and that the clamps are seated properly on the hose so you have no leaks. Were you getting good pressure before your fuel pump died?
Thank you so much!!
Do you start with no gas in tank ?
I had about a quarter tank of fuel in my car and I wish I had less in it. Wear some nitrile gloves to keep your hands dry. Any more gas and you'll be splashing it all over the place.
I kinda need help, is the return fuel line connected to anything in the tank?
Raczej nie, może lać spod dekla
I never knew that the rear seat is ao easy to lift up.
Mrci❤
You missing one thing bro
What is he missing bro?!
Maybe how to depressurize the system. Just my guess.