K30 Trail Build, 40" Tires on 5" lift
HTML-код
- Опубликовано: 4 сен 2024
- This week, we install 40" @MaxxisTiresUSA RAZR MT's on 17" @battlebornwheels beadlocks. The 1982 Chevy Squarebody K30 is finally on the ground again! #k30 #squarebody #fullsize #offroad #garagebuilt
For another great channel, check out Clint McMillan (Crack Haus Customs) @clintttm
Contact me: pootsgarage@gmail.com
Tupelo,Mississippi watching u
Sierra watching from Tampa, Fl here and your funny af I love it. ; ) ...
Bamberg South Carolina!! ❤.
Love the video and truck and tires and wheels 👍💯 watching from Hamlin, New York bro
Hell ya, thanks a bunch
Rupert, Idaho. And I’m in the process of putting a 6 lug 14 bolt semi float rear axle in my 86 k10. It’s going to be on a 6” lift and 37x14.50 on 15x14 Bart wheels. Going to make a good mud truck just a slow process.
Sounds like an awesome project
The tires & wheels look GREAT! Can’t wait to see how it looks after trimming. THANKS for including pics of my junk too!
Thankyou!
Tucson here. Love the build. Basically the suspension and drivetrain I wanna do to my 76 Burb. Those Battle Borns are beautiful.
Milton,Florida
I wouldn't be able to walk for a few days if I tried that. They look great. Can't wait to see the fenders all trimmed out. That is one tall truck. Great job. Keep having fun. We use liquid instead of beads for the RV tires.
I can barely move this morning. Now I gotta go to work 😭
Miramar, San Diego California
Vernonia Oregon here. Liking the build. working on a 73 K20 my self
Tallassee Alabama. My last rock crawler was a K5 with M1008 axles, 6 inches of suspension lift, 2 inches of body lift, and 44 inch TSL's. It did require quite a bit of fender clearancing with the sawzall. Truck worked awesome on the trails. I ran a 454 on propane with a th400/203 range box/205 doubler setup. Being able to do a front only dig to bring the front end around can be a huge advantage on the trail.
Sounds like a beast
Awesome rig. Working on my own 85’ crew dually 4x4. 35’s on 16.5
Wow man that thing looks KILLER with the wheels & tires installed!! 😜😜😜🤘🏻
Thanks!
@@PootsGarage hey bro I don’t think you’ve added me to your map yet so hit up Statesville NC buddy!! 😁😎👍🏻
@@gimmefuel7268 I will get it on there
NICE LOOKING TIRE & WHEEL SET UP.....GOONA BE SICK ONCE ITS ALL DONE
Make sure to watch the newer episodes, it’s turning out great!
Right on man I feel you with the back workout beadlocks take for ever to do but the look and work amazing, so happy for you that the truck is on the rims and tires now looks great
Thanks, three days later and I still feel it!
@Poots Garage true but look how long you have been working on this truck with a vision of how it will look ....and now you can open the garage door and enjoy the view , can't wait for the next videos
San Juan,Texas.
Looking forward to hearing if you like these tires. Galt, CA
So far so good, cant wait to get them out more. I also keep bringing the pressure down further and further.
Hey bro thanks for posting up my truck!! 😁😎 I feel kinda “internet famous “ now! Lol You got something good going here. Keep it up! 👍🏻👍🏻
Hey I spotted Willow.😸 Go rest that back and have a beer. That was a lot of work. Good Job!!!
Two days later and I’m still feelin it
That's crazy to hear someone from Jasper ga we are small town in mountains
I’m in shock of all the random places too, it’s pretty cool
Love the tires and BTW that black and silver suburban is absolutely gorgeous 😂
Lol, of course you’d love that one
I’m from Neptune New Jersey Monmouth County representing!!
😎🤘👍🔥💯
Jacksonville Florida
Looking good!! Irregardless if you have to trim that’s a sick truck man!!
Possum grape Ark. I have a 6 inch lift with a 3 inch body lift on 38 inch tires ,05 Chevy cat eye!
Nice, I like those trucks.
Watching from Clarksville, TN! Badass setup bro!
Jacksonville, al (between Birmingham and Huntsville)
My back hurts after watching that. I think the next step is to have a beer. Nice work cousin!
Ontario California
Athabasca Alberta, nice square body!
Stringer Mississippi with 85 K10
I’m from Littlefield Texas, and just recently moved to Conifer Colorado, I have an 86 M1008 as and a 84 K20, I hope to swap the axles into the k20, I like the content you are putting out
Thanks! The M1008 axles are awesome
Wheeling west Virginia
Johnson City, Tn..
Lookin sweet!!
Aww those tires are cute!!!!😂😂😂
Hey now, you gotta start somewhere!
These tires have been awesome on my m1028 chevy on 33s
Good to know
Watching from Whittier, CA
Colorado Springs, Colorado
Mine is on a 5 or 6 inch lift and on worn out 38.5s the previous owner did already trim the front fenders I’m curious to see if I can put 39.5s on it with the 15s it’s just a somewhat daily now not seeing much off-road mostly a “truck use” truck
Ding Dong, Texas
I’ll be honored to add that pin 😅
Watching from indio cali.
Hey bring it down to Lahontan and test it in the sand. I do off-road recoveries locally I'll bring the deuce out to keep you outta trouble haha oh and pin silver springs 😂
Hell ya, I hear about people getting stuck out there all the time, I need to check it out.
Moses lake washignton
Love it. Beaumont Ca.
new sub watching from McCall Idaho
Glad to have ya
Ruidoso downs NM
Black river falls wis
We are in Kent, Washington!
Shouts out pnw I’m in/from Olympia
@@ChevyHalfTon Nice! I love Olympia, we just moved to Las Vegas 2 months ago!
Looks killer. I’m doing 5” lift on my 87 suburban right right now. But I went with the tension shackles instead of the shackle flip. I’ll probably stick to a 37” or smaller, I don’t want to cut my fenders if I don’t have to. When you ordered your springs, did you do stock location? Your fitment seems to be pushed forward on the front axle a bit. I ordered 1” forward for the front springs and 1” back for the rear on mine.
I have a 6.2ls, 6L80E, NP205 and one ton axles I’m swapping in also.
I ordered the springs with the axles 1” forward and back also. Your project is going to be awesome, that engine and trans will be 👌
Pittsburgh pa
Medicine Hat Alberta Canada
Georgetown,CO
Great where to order these alloy rims ?
Dennehotso az
40" too big for s 5" lift. 35" would be perfect
What gears are you running for the 40s? Would mine be ok with 4.56 and 40s kind of a daily drive won’t see dirt but occasionally it’s already trimmed up for 38.5s 5.3 ls slight cam turbo 400 transmission and np208 t case and 14 bolt rear Dana 60 front
@@peytonmathis7460 mine is 4:56’s too. It actually drives real good around town and cruises at freeway speeds. I’d prefer lower gears for off-road, but my granny gear transmission makes up for it.
@@PootsGarage I’m really debating going to 40s just for the heck of it I gotta get tires anyways and my axles need rebuilt as well so I’m also debating going to. 37s and 4.10 but not really sure which way I want to go, 40s + axle seals and leave gears = badass looking truck and still practical but probably would need to trim more. Or 37s + 4.10 gears = no cutting still looks badass just not as much and still be more practical. Both would probably come out about the same price so I dunno
mesquite nv were did you get the cross over steering?
Offroad Design (ORD)
I have a feeling that those tires are way to big.I have been restoring these Square Body trucks for over 35 years and had every tire size known to man.37 13.50 on 17 in wheels seem to be about perfect with minimal Body trimming. I Always trim the front fenders below the side marker lights.Come up 4 inches from the bottom of the fender and slice.This is just my 2 cents worth.Oh yea now it won't get through the garage door.
They are definitely too big 😂. But I’ve always planned on lots of fender trimming, so we’ll make ‘em work!
Fort morgan colorado
Hudson wi
What about the gears???? Lol
Its got 4.56's in it. We'll see how they perform. Since this truck has the granny gear it may just work out.