STARTING SIGHT UNSEEN OUTBOARD FOR THE FIRST TIME | FULL BOAT RESTORATION PART 14
HTML-код
- Опубликовано: 6 окт 2024
- Hey guys, welcome back!
In this episode we finally get the wiring organised and turn the key on the sight-unseen outboard for the first time! will it run?
In this episode we also finish wiring the 12v dual battery system for the boat and install the inspection port and the hatch for the floor.
Hope you guys are enjoying the boat restoration series!
thanks for the Support!
►Subscribe to the channel / Angry Mack Adventures / angrymackadventures
►MY Instagram: / angrymackad. .
▼MUSIC:
►EMAIL: angrymackadventures@gmail.com
▼SOCIAL MEDIA:
• INSTAGRAM: @ANGRYMACKADVENTURES
• INSTAGRAM HASHTAG: #ANGRYMACKADVENTURES
Nothing beats the Sound of an Engine Starting 1st Go !!!
Coming along incredible !!!
Now all the fiddly bits ..... Hyd Steering , cable tidy up and fishing electronics ...
Rebuild Series is Rockin' !!!!
That's the plan michael, your on top of it :') thanks for watching my friend!!
Absolutely love this series. Well done mate
Thanks a ton! glad you enjoyed :)
Thanks for watching guys, the support for the build has been incredible, remember to SUBSCRIBE for weekly updates on the build, really helps support the channel :)
Man it's actually so inspiring to see how far you've come bro!! Loving the new camera set up as well, the quality is definitely noticeable 👍
Appreciate it Ethan, thank-you yeah this camera is soo much better :')
That engine sounds beautiful. The smile on your face says it all mate. Well done on this build, I’m stoked for you!!!! All the best from the UK. 👍🏻👊🏻
Thanks a ton!
Congratulations nick on all your hard work on the boat cheers 🎣🎣🎣
It looks great Nick. Be proud of yourself.......
Rosie DAGOSTINO Thankyou very much 😍
Top job Ladd, she is getting close now. Keen to see it out on the water 👍
Thankyou very much, me too!!
Unreal mate, congratulations. I've really enjoyed watching this mate. Cannot wait to see it up and flying.
Thanks a ton adam! more videos coming soon, hoping to finish build for summer! :)
Loving this restoration, can't wait for the next video
Yeww Coming soon! thanks for watching mate!
It runs! Good on you mate.
thanks nico, sure does!!
@Angry Mac Adventures Great series bro 😎 you have gave me a lot to think about in these 14 episodes I’ve watched. I hear want people mean when they say that a boat can be a money pit. Don’t get me wrong I’m still gonna give it a go 👍
Thanks for watching mate, def give it ago, you learn alot about your boat!
Hey mate just from seeing my dad work in cars at 8.35 the oil is gulping out of the container if you turn the container sideways it should pour out smooth doesnt matter when using a funnel bur if your ever in a pinch pouring oil there's a quick time I've being taught. Awesome series cant wait to go adventuring.
thanks for the tip Jack, ill be sure to do that next time, thanks for watching, hope your enjoying the content!
What a great engine I have a 150 and love it u will love it as well good job 👍
Right on! thanks daniel, love the etecs!
Cool Mack, sounds great!
Looks slick ,Getting close now,
thanks mate, hopefully she’s ready for summer :')
Such a good sound when it started right up Mate. Get out there fishing Brother. I wade fish mostly, no water vehicle for me but still have a great time. Peace
Its was great to hear her start up for the first time!
thanks for watching :)
Nice my man, alot of hard work and effort to get to this point keep it up!!
Thanks a lot bash, sure has been!
Sweet man.
thanks mate!
Well done.
thankyou!!
sounds good bro, you must be so happy with this build
Absolutely stoked mate, cant wait to take you out on it :P
@@AngryMackAdventures the boat won't be the only thing that will get wet :P
At 10:30 is he London uk? If not he bloody sounds it 😂
Where do you find your manual???? Looking for a manual for my 1999 200 Johnson and can’t find it anywhere
What is the connector you used from the garden hose to the flush port? Thanks and great vids.
hey mate, come with the outboard!
Awesome to see the engine start up! One MAJOR step to getting it into the water. It already looks like a new boat, looking forward to seeing the console completed with guages, chartplotter(s), and the all important steering wheel. Am I correct to assume that you're going for hydraulics instead of wire for steering?
Thanks for watching Nathan! yes defiantly something out the way, and to push onto the next task! Yes the dash is the next thing to finish off once i install the steering wheel! :)
Yes going hydraulic Hydrive system in the boat :)
How’s it going, your videos are awesome and I also have a 2008 Evinrude Etec 150 and I was wondering if you could help with a link where you found your installation guide. Thank you
4Reel Fishing Hawai’i hey mate thanks for watching! Absolutely
I used this
www.manualslib.com/manual/829732/Brp-Evinrude.html
At the end of the build can you do a price check list of everything
Yes definitely something im going to do, im keen to see what it adds up to!
Century batteries recommend that the starting cables go on to the main battery posts , not on the threaded posts .
thanks for the note mate i didn't know this!, i will look into it. If thats the case i'll definitely be changing the terminals to the main posts, thank-you!
Nice. But after all that work, you install a 2 stroke?
Wingster Rod hey mate, ahh just personal preference, I like the way 2 strokes perform. The hours/condition/price of this outboard it was a no brainer to buy. And of-course I didn’t have the extra $15,000 to buy a new 4 stroke, but definitely in the future this boat will get the upgraded engine it needs. Thanks for watching 🙂
hit any open edges of wood with epoxy. that hole you installed the oil tank in will rot at the edges if you dont do this. i use west system clear penetrating epoxy
Oh yes great idea I’ll be sure to do this, thanks for watching :)
@@AngryMackAdventures I just finished replacing a whole floor because of rot so always to stay ahead of it if you can
Boat looks awesome.
What year is the Evinrude ?
It's reasonably quiet and smooth compared to my 115 Mercury which sounds like a dirt bike.
Is ur outboard a 2 stroke
Hey danny, 2006
@@mistakez4855 mine is
Good vid but that connector is only for cold flushing, otherwise you have to use muffs
Hi Jacky, thanks for the note, i didn't have muffs for the video but definitely be purchasing some for future engine flushing, thank-you for watching!
@@AngryMackAdventures no problem man there really good engines amd great build man aswell
How much did it cost in total, excluding the outboard?
Hi Luca, there will be a full video on cost and hours in the near future, need to add everything up :') but for full boat restoration inside and out doing the work yourself with trailer may be cheaper then you think !
about how many hours do you think went into this total?
hey mate, i lost count at 200 hours :') but i will do a breakdown shortly on costing and hours (roughly)
@@AngryMackAdventures Great, I am thinking about restoring my 1982 wellcraft V20 and I just want to see about how much it would cost
@@AngryMackAdventures 😮 200+ wow that’s bloody crazy, I’m shocked.
Couldn't you just extend oil line all the way to the primer instead of using that brass fitting
Hey mate thanks for watching! needed that extra 100mm to run neatly with the fuel line, something i will be change in the future, just working with what i got and keeping eye on budget :)
No more evinrudes are being made
:( very sad
yeahh that's a shame, i wasn't happy when i heard the news, they are wicked engines!
Why wasn’t there water coming out of the telltale
Yeah I was wondering the same thing. Might wanna look into that cause I know some evinrudes like mine have the part where he put the water into just to flush the motor, like push water through the motor backwards. Pretty sure it’s like most motors and your supposed to put towards the leg and waters meant to come out of the telltale. Might be a different type of motor but should definitely look into it.
Hey Guys thankyou for the concern, on first start up ( when recording) i had a long hose running to the motor so had minimal pressure, and engine was only running for approx. 2 minutes. Since this video i had started it again with more water pressure and water was exceeding through telltale, impeller is healthy but before going out onto the water, outboard is getting full service and check over :) Also i rang evinrude dealership and they said to use muffs to properly flush engine instead of using the flush port, so ill try this also.
thanks for watching!
The flush port / tell tail is only for flushing the power head “without” the engine running!