⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCJ9xpq0qUZevSEdBSFqO2ow
Thanks for this video I was able to work with my son for repairing his window switch. Just a tip on the back side of switch to remove it you can go under the middle clip from the side and pry it then use a paint scrapper to hold it back. Once it’s in the back side it’s easier to remove front and two smaller clips holding switch.
Thank you so much for posting this ! I just replaced my window switch and it was exactly like you described . I even had the broken plastic piece fall off on my car too! Got the part off Amazon for 27 bucks . Saved me a lot of money and only took about 30 mins start to finish . Maybe less but I wiped everything down and cleaned it up just because why not . Anywhoo . Thank you for helping the world with your videos . 2011 Hyundai .
Thanks a lot this helped greatly appreciated,though it turned out to be my wiring to the door switch came loose . Didn’t have to change out switch mode.😊😮🎉
Hey guys. Do not remove the switch this way. First off both sides had a cloth tape that needed removed before you can pry the sides out. You can't pry the back side out that way. There are 9 phillips screws that need removed and the whole unit comes off the door. Then you can reach both sides of the switch to pry it out properly and not bust off the plastic you need to put the unit back in.
Thank you so much! We replaced the window switch but now the dome light is always on -as if the door is open even when it’s closed The connections look tight - any ideas?
@@tylerbuckner311 thank you. I ended up putting the old window switch back in and the dome light still doesn’t work with the doors- we have to turn it on/off manually. 🤷🏻♀️ so now I need to replace both… that’s tomorrow’s problem. 😂 thank you.
@@TheSharona10the little button on the side is probably the problem. It’s on the middle between the door frame and door itself . The rubber bumper probably is off or warn I had to use some duct tape and a rubber thing taped to my door to get it to press in to turn off the interior lights but eventually it stopped working all together
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCJ9xpq0qUZevSEdBSFqO2ow
Don’t understand why they didn’t make it so just the switch comes out without taking the panel off. Thanks for the vid!
Thanks for this video I was able to work with my son for repairing his window switch.
Just a tip on the back side of switch to remove it you can go under the middle clip from the side and pry it then use a paint scrapper to hold it back. Once it’s in the back side it’s easier to remove front and two smaller clips holding switch.
Thank you so much for posting this ! I just replaced my window switch and it was exactly like you described . I even had the broken plastic piece fall off on my car too! Got the part off Amazon for 27 bucks . Saved me a lot of money and only took about 30 mins start to finish . Maybe less but I wiped everything down and cleaned it up just because why not . Anywhoo . Thank you for helping the world with your videos . 2011 Hyundai .
Thanks for the info! This is going to save me around $400!
I love your videos for the Hyundai sonatas 2011 so helpful and specific thank you.
Thanks a lot this helped greatly appreciated,though it turned out to be my wiring to the door switch came loose . Didn’t have to change out switch mode.😊😮🎉
Hey guys. Do not remove the switch this way. First off both sides had a cloth tape that needed removed before you can pry the sides out. You can't pry the back side out that way. There are 9 phillips screws that need removed and the whole unit comes off the door. Then you can reach both sides of the switch to pry it out properly and not bust off the plastic you need to put the unit back in.
This worked perfectly for me thank you for the video only problem is that my lock/unlock buttons won’t work since I’ve replaced it on both sides.
Thank you for making the video.
Thank you so much! We replaced the window switch but now the dome light is always on -as if the door is open even when it’s closed The connections look tight - any ideas?
I think he had another video on this exact issue, I’ve watched it before just so ya know
@@tylerbuckner311 thank you. I ended up putting the old window switch back in and the dome light still doesn’t work with the doors- we have to turn it on/off manually. 🤷🏻♀️ so now I need to replace both… that’s tomorrow’s problem. 😂 thank you.
@@TheSharona10the little button on the side is probably the problem. It’s on the middle between the door frame and door itself . The rubber bumper probably is off or warn
I had to use some duct tape and a rubber thing taped to my door to get it to press in to turn off the interior lights but eventually it stopped working all together
Kinda crappy how you didn't show how you actually got the switch out of the door panel. But thanks for the video. I managed.
exactly my thoughts.
Excellent
I want to carbon fiber vinyl wrap my 2014 Sonata door accents panels. Do they come apart?
Is this the same guy that’s on talledega nights?
That's his Russian cousin 😂
Thank you all. I appreciate you.
No enseña cómo retirar la caja de mando del lado interno y dejas desinformado al cliente. Vea video de Chris Amaro!😊
DID NOT come out easy, STUFF BROKE!!!
shame its not in english.