Peter, the longest break I had was 4 years it just takes a painting or two to knock the rust off. The mussel memory come back pretty quick. Thanks for watching.
That’s funny. I last used my airbrush in 1992 and I ordered a new one today after years of digital, oils and sketching. This channel is the first one I’ve found for good tips.
I just ordered an airbrush to paint gaming miniatures, this was super useful practices to start with as I learn the basics of setting base layers on models.
Great teaching skills, sir. No pretense, no lofty attitude and you explain techniques in a way even I can grasp...yes, even this old man. Clear and concise instruction which will help me move past the training wheels. Thanks for your help, Dan. Regards, Cork
Thanks Cork, that is not only very nice of you to say but it is very helpful. It comments like yours that make want to keep making videos. keep on practicing and enjoy the journey.
Great tutorial! Getting ready to start again. It’s been a number of years. Looking to see where I’ll go with it. Retired now so have a lot more time. Anyway Great video. Thank you
@@TheAirbrushGarage yep I started in the 90’s so I remember the old ones at the Atlanta Expo .. then life happened… but I still have all 5 airbrushes and most of the paints are still good amazing… Createx and Golden. I’ll keep watching to learn some new tricks. You are such a Blessing and Legacy to the airbrush community. Happy Creating
Great video again. I’m having a problem that when I put a new needle in it’s dragging really bad on the little brass screw in the gun so when I pull the trigger back the needle is staying back
Phil. If you are talking about the needle packing nut inside the brush in front of the trigger, then it sounds like it is the wrong diameter needle. Or there is paint stuck in there.
Craig, lol. You are correct. I am not famous but I do get the most enjoyment out of teaching and helping others that want to give airbrushing a try. Thank you for such kind words and thanks for watching.
Thank you soooo much! I will learn how to airbrush thanks to your fantastic videos! I really appreciate it, and hopefully one day I will be able to inspire others as you do.
I’ve learned to paint cars, but never done airbrushing. I just bought one from a cheap website, and it didn’t work even after reducing the paint it wouldn’t spray. I bought a more expensive one from harbor freight, and it sprayed better than the other one. I was really trying to get an Iwata but the prices deterred me from that 😅. Thanks for the tips I found the airbrush rather harder than a car paint gun, but it may all be due to the airbrush gun I have being cheaper.
Kevin, the airbrush is definitely a different than a spray gun. It really is just a matter of getting the paint to flow and learning trigger control. Here is two videos that might help. ruclips.net/video/XnbRkeYBVyY/видео.html ruclips.net/video/jlm2OMU7fbo/видео.html Good luck and keep practicing.
Add reducer first is what I learned. It so the paint mixes better with the reducer. Adding paint will let the paint stick to the side of the cup. I still do the practice drill. I have been airbrushing just as long as you.
I don't know if you ever used them, but i would recommend trying acrylic inks. They have extremely vibrant colors, great coverage and need no reducer unless you want to reduce the opacity of the ink. That said, great video, great warm up routine!
Gazes, I have not used them. I have a friend that uses them on his metal art he loves loves them and they look great. At some point I may explore them. Thanks for the comment and thanks for watching.
I've only just discovered you, thanks so much for sharing your knowledge with us. I look forward to progressing through your videos and ultimately learn how to master an airbrush
David, that is very nice if you to say. All i can say is... be patient, try not to get to frustrated. An Airbrush is a finicky little tool. And...practice, practice, practice. Enjoy the journey. Thanks for watching.
@@TheAirbrushGarage Could you do a short series of step by step vids for rank beginners like me? There's nothing out there. IE: start with a simple design that comprises of easy brush techniques, then slowly introduce more complex brush work with each video?
Bent, that's what it is al about. If you think about it, every painting we do is just practice because you learn something on each one. Thanks for the comment, and thanks for watching.
ETLFC, I am not familiar with Croma but it is the same for anything you put through an Airbrush. It has to be thin enough for you to get consistent flow. Most paints are not thin enough right out of the bottle, but your airbrush tip size will play a factor as well. It really is a matter of experimenting to find that sweet spot. I hope this helps and thanks for watching.
Truth, sure. The tank can never be too big! Lol. No matter the air source, you are going to be using around 20 to 30 psi for gravity feed and around 40 to 50 for siphon. Hope this helps, and thanks for the question and watching.
@@TheAirbrushGarage you too my friend how’s everyone I hope all is well and you and the family are healthy!! I’m still going and practicing your technique and teaching everyday I’m doing a lot of Chicano art with the girls who have the clown make up on a lot of people like that and doing skulls a whole heap I just watched your video on my first skull with the peel back paper stencil ! Let’s open a tshirt and hat airbrush shop in Myrtle beach together !! I told my wife we went down there for cheer and our daughter and no one does airbrush down there !! It’s all spray paint pictures ! We’d clean up !! Seriously I hope your doing AWSOME me and the wife always pray for our family and friends to god gives you and yours health and wealth forever ! Can’t wait to see your next video buddy talk to you soon Forever your student And even longer my friend Marc
Hi Marc. I am doing well. I've been busy with family and life along with remodeling a bathroom. I am planning on coming out with a new series of videos soon. As far as starting any new business, those days are over for me. I am planning to retire in about 5 years and spending a lot more time with my grandkids. Thanks for checking in. I hope you and your family are doing well and keep on airbrushing!
@@TheAirbrushGarage my friend grandkids and family are what makes life AWSOME ! So enjoy it all I love time with mine and I just remodeled our downstairs with hardwood floors and it was an absolute crap show so I know your pain but thank you and oh I just got 2 big bottles of 4011 reducer and my wife for my birthday ( belated) ( August 1 ) she is buying me a new airbrush an Creos ps771 ( is that a good one ?) with the 0.18 needle it was either that one or a Iwata side feed TAKUMI with a 0.3 , so I’m excited !👍🏻👍🏻 ! Talk to ya soon my friend Your friend Marc
pocdabeno1974, I had no problem with the 4012 with the wicked, I used it for years. But it did not work well with there clear and Candy 2o. So they discontinued the 4012 and went back to the 4011. Eventually we won't be able to get the 4012. Thanks for the comment and thanks for watching.
Correct - Warm ups are VERY important - every artist and athelete from musicians, dancers to baseball and football (you name it) do it before a live performance and remember YOUR live performance is on the canvas you working with
Thanks for the comment and letting me know what you would like to see. Keep a look out in the next few weeks for that video, just a reminder I upload a new video every Saturday. Thanks for watching, much appreciated.
great videos. Thanks. I have a question. Is it possible to paint oil paintings with an airbrush where the main medium is linseed oil? The pigment should be very transparent to have the right viscosity. What parameters should the airbrush and compressor have for this type of work? thanks a lot
Adaam, I have no idea as I do not work with that type of medium. But, an airbrush will spray anything that can properly flow through it. Since it is oil based paint, make sure the brush is solvent proof, meaning it has the Teflon needle packing and not a rubber O ring because you will need a solvent cleaner to clean oil based paint. Most brushes are solvent proof, but make sure before you buy one. hope this helps.
I know this is sort of an off comment but I’ve been searching out content that is not political. I’ve always been an artist and want to spend my attention on something wholesome. This is one of the first videos I’ve found with this new goal in mind. Thank you. Can’t wait to get a brush. Should speed up my crafting and give me a new medium to practice.
Thorny, that is is so nice of you to say. If you decide to jump in to airbrushing just remember to take your time, practice a lot and you will do amazing things. If you ever have any questions I am always willing to help. Thanks for watching.
Hi Nina. I spray at 27 p.s.i. It is a combination of trigger control and speed. If you are having problems at that pressure, take it down to 15 p.s.i. and add a few more drops of reducer. I hope this helps, and thanks for watching.
Joshua, I am assuming you are using water-based paints like Createx Illustration colors. I personally would use protection with my 9 year old. Here is a link for what I would use amzn.to/3uw51IG an exhaust fan with a filter would also be helpful, but the mask at a minimum. I think that's awesome your daughter wants to give airbrushing a try. If you ever have any questions, just let me know. I hope this helps and tell her I said to be patient and practice, practice, practice. Thanks for the question, and thanks for watching.
JP, one of the biggest reasons for tip dry is shutting the air off and then the paint. Air on, paint on, paint off, air off. And you will minimize tip dry. I hope this helps. Thanks for the question, and thanks for watching.
Dan, I am an Amazon guy for the most part but I do like Spraygunner as well. Here is a link to the water trap. amzn.to/3pKEJwH Thanks for the question and watching.
Hi Dan, I just found your channel yesterday. I'm over in the UK and I'm loving your videos - you are teaching with sincerity and not arrogance, which is brilliant. I'm no artist at all, and I've just started my airbrush journey, so I'm happy I found your channel.
Lainey I am so happy to hear you like my videos and welcome to airbrushing. You don't have to be a great artist to be good at airbrush and I bet your better than you give yourself credit for. Remember,,,, just be patient, practice and you will get it. Thanks for watching.
Thx for the video. To clarify, when you make dagger stokes, you get the thinner part of the dagger by moving the gun closer to the surface, or by reducing the air flow? or by a combinatino of both?
Arsen, both. As you move closer to the surface you are also in the process of triggering the air off at the end of the stroke. Make sure the brush keeps moving after the paint is shut off. And! At the end of the stroke only shut off the paint not the air. Hope this helps and thanks for the question and thanks for watching.
Cnd, I have heard of people using a lot of different things. Early on I have tried just water and then water and dish washing soap but I have found and always recommend using the suggested reducer that the manufacturer specifies. In my case using Createx I use 4011. It really is not that expensive and it last a long time.
Generac43, it was a 2 cylinder Master here is a link amzn.to/3NVez5p. I now use my 2 gallon Fortress. I have a review on that as well if you're interested. Thanks for the question, and thanks for watching.
43rocket, not sure what next to line means but overspay is very minimal because of the small volume of paint being sprayed and the low airpresure. If you are referring to the atomized dots of paint outside a pass with a spray gun then no. Airbrushes are designed to spray in a circular pattern and can produce very fine lines. Hope this answered your question. If noted me know. Thanks for the question and thanks for watching.
Yes that is normal but you can get a fine line by getting close to your substrate. Also, air pressure and how fast you move your airbrush will play a roll. So basically the closer you get to your surface the tighter the line should be.
@@TheAirbrushGarage should I mix paint in the airbrush or outside in a separate cup? if you dont put thinner in brush first the paint wont be thinned enough?
Rocket, it really is a matter of preference. I do it both ways. If I am spraying a straight color I mix in my brush. if I am trying to match a color I will mix in a cup.If I mix in my airbrush I mix, backwash, mix. I try to put reducer in first but if I don't I doesn't really matter. Thanks for the question and thanks for watching.
Hey Dan it’s Marc again hey I just looked and I texted you I was missing my rubber O ring on my Iwata eclipse and damn I looked on my Iwata hi line HP CH AND THAT WAS MISSING THE O RING ALSO BEHIND THE HEAD CAP !! What the hell I spent $300 on that and they ripped me off for the O rings on both my Iwata guns!! I’ve been running them with no O rings behind the head cap !!
Good morning brother Dan, I noticed you said in between your tutorial exercises. You can do little projects to see how far you’re coming along. OK my question is I have a Canon 98 pound 18 by 24 drawing pad. I was told 140 pound drawing pad is better. The 98 pound 18 by 24 drawing pad is what I’m doing my exercise tutorials on dots, daggers and lines ect. OK this is the question what weight drawing pad do I need to be using in order to do the clearcoat and where do I get the clearcoat from to make the finish shine or glossy!!!🎣🎣🎣
Sounds like the paper you are using is fine and as long as it is glossy paper you can clear coat it. For doing actual projects on an airbrush paper I use a product called Tera Slate. As far as clear on small projects I just use krylon in a can.
@@TheAirbrushGarage Hey brother Dan, this is not glossy dull and soft. It’s like kind of heavy 98 pound drawing pad ahh it’s like thick corn bread paper I use to use in elementary school you know when you was learning your ABCs. But it’s okay I think I will go and buy me a Gesso canvas. Already prepped for airbrushing then I can clear coat that right. I will check on the Tera Slate what clear coat do I use for the canvas and the Tera Slate. Thanks brother Dan!!!🎣🎣🎣
@@TheAirbrushGarage I seen the Terra Slate I will order me some which size do you use 8 by 11 Dan. Also I see 9 by 12 water color drawing pad 140 pounds.
@@TheAirbrushGarage Thank you brother so much. I have a color wheel now and Steve Driscoll flesh tone set. I have some everything brother 3M super 77 a bunch of different French curves. Bunch of Createx Wicked colors a Kodak mini LD projector Lunma 75 $169. 18 by 24 stencils I have been ordering a lot of stuff cause I want this airbrushing BAD brother. Thank you again brother I don’t wanna go-on-and-on.!!!🎣🎣🎣
Kaine, I spray createx white sealer over it and reuse it. Now...if I was going to paint something that I was going to employ scratching techniques I would use a fresh canvas. Thanks for the question and thanks for watching.
@PahelBrunis it depends on the price point. The $40 brush is not equivalent. But there has been better competition surfacing lately to compete with the major names I did a review on a brush that I think is equivalent to my eclipse and has a better price point and you get more accessories with the brush than you do with the eclipse. Here is a link. If you get a chance, check it out. ruclips.net/video/RFi3cxS-SFQ/видео.htmlsi=tAPkjkmnvpH1TMwG
I'm trying to learn how to defeat tip dry on the needle of the air brush. I've tried everything I could look up! Still platters and or just no paint flow. Even "ready to spray" primers just have not worked. Anyone have a tip?
William, alot of people comment about their concern about the work on the wall. They are all throughly cleared and have been there for years. I have them there for a back drop. I appreciate you giving my videos a look. I appreciate it very much.
Ronald, the canvas that art stores sell are pre-primed with an acrylic gesso. I never buy un prepped canvases. I have seen others prep canvases with their own gesso but that would be on raw canvas. Not sure why someone would do that. It is just to easy and cost effective to buy pre-prepped online or in an art store. Thanks for the question and thanks for watching.
Hi Dan. I bought my first airbrush (Iwata NEO) and I'm having issues with splattering. It's fine, but its there and I can't seem to get it to go away. I'm using the Tooty compressor from Spraygunner running around 15 psi. Any feedback would be appreciated.
Try 18-25 psi mix your paint well enough , and make sure the needle is not blocked by any paint also try not to let go of the air hard either that will cause a splatter as well , best of luck
Adequate, a reducer is to thin the paint or to put it another way it is it increase its viscosity. If your paint is too thick, the reducer thins ot out to make it flow better. Hope this helps. Thanks for the question, and thanks for watching.
@@TheAirbrushGarage Thanks for answering so quickly I really appreciate it. Also do I need to add thinner to paint if I am using a primer or airbrush straight flat colours?
@Ade Adegoke it just depends on the flow. If it's not coming out of the brush "nicely," then reduce "thin" until it does. You will get good at ot. It just takes practice and time. There is no magic formula. Lol. If you ever have any questions just let me know.
Question: I build plastic model airplanes. I need to paint the panel lines of the plane. I can’t seem to follow the straight panel lines. My pattern comes out wavy. Any suggestions ? Thanks.
Art, yes. There is a misperceptuon that airbrush needs to be freehand. In reality a method should be chosen to achieve the desired effect. With that said... In your case I would tape off each panel line and simply spray the desired color. You can see this methid in my rivet video. Or you can use a straight edge from a free hand shield. Hope this helps and thanks for the question and thanks for watching.
Judemichael, wow I did not pick up on that. Yes, I miss spoke. It is of course .35. Being a one man show is tough sometimes. Thanks for the correction and thanks for watching.
@@TheAirbrushGarage completely understand..I've said things like needle cap when I meant nozzle cap or vice a versa.. You have real good tutorials man , don't sweat it..
Just be wary of brand fanboi-isms. Iwata's are Illustrator brushes mostly and are designed and used over seas as such with Inks and water based media. The .3 or .35 like the eclipse are good for acrylics but nothing much thicker like enamels, which at .3 almost need to be way over thinned to push through. Iwata brushes popularity and small needles were why Testors enamels got such a bad rep, that and people not knowing how to properly thin enamels. Iwatas weren't designed for thicker Enamels and luckily I have amassed a large stash of formerly tossed Iwata Airbrushes because people thought they were ruined by the enamels being left in them. I still find gunked up ones for 5 bux at goodwill or thrift stores that are basically brand new. Basically you decide what you are going to work with and get an appropriate Airbrush for said needs. .5 needle units are for thicker media and can still get fine details but are best for large area painting. .1 to .18 are for inks mainly, washes and water colors. .2 to .35 works will all media up to Acrylics and Lacquers and thinner Oils (Not Thick oils or enamels), though inks can be used they will require PSI adjusting and in this mode mostly broad coverage use. .5 for Enamels and Oils. This isn't Holy scripture just a general guideline, you can use your brush for many medias out there but will have to play with mixing ratios and PSI just note you can thin only so far before pigment loss and paint types not behaving correctly. In no way is Iwata better or worse than Badger, Paasche and other mid range brand equivalents, all are quality tools and some simply have a better value per dollar in their packages than others. Iwata is like Apple, you pay a lot more for the branding for what's included. You can't go wrong with having an Eclipse lying about, though my Patriot 105 with all 3 needle sets is my main workhorse and the H&S Infinity I have for the small detail work as I mainly paint MOdel Cars/Planes and wargame mini's, the Eclipse is just too large in most cases other than coating and shading.
Animalyze71, Wow! Love the the break down and review. You obviously have been doing this a long time and I appreciate you sharing you thoughts and experiences. Perspectives such as yours helps out other viewers that visit the channel. Thank you for taking the time to share this. Much appreciated.
What other namebrand paints do you think is good for beginners. And I will be painting guns other kinds of hardware around the home on paper on canvas, etc..
Hi Robert, I have only used createx paint since I started 20 something years ago. If Createx is not what you want to use, i would research paints like Velero and No name. Thanks for the question, and thanks for watching.
Thank you so much for the information. I got into this to do firearms so I was going to use mostly Cerakote or Duracoat, but after watching your videos and other videos, I would like to try more although I do not think I am as artistic as you all, but I thought as I am getting older I would like to try. I subscribed to your channel and will be watching all of your videos. You have a great technique and teaching ability.
Thank you, Robert. That is very nice of you to say. You do not need to be an accomplished artist to airbrush. What is important is that you learn some tricks and techniques and learn to work with the paint that you are going to use. If you ever have questions, just hit me up.
Fred, I have videos reviews on all the airbrushes I use. I break down each brush and take a look at each component. Check them out if you get a chance. Thanks for watching.
Soheilia, it sounds like you have a tankless compressor. It only delivers air when you press the trigger. So yes, that is normal. Thanks for the question and thanks for watching.
Right from the beginning I don't want to finish this video. The first thing you should add if you're going to mix in the cup is reducer. I mean it's literally basic physics😢
I am not sure about the physics part. lol. But I have been doing it both ways for so long it is just my opinion that it really doesn't matter. Once both are in the cup I mix it with a little mixing stick and the a quick back wash. That's what works for me. Regardless of which one goes first it still needs to be mixed before it gets sprayed. I do appreciate your method and perspective. Thank you for the comment and thanks for watching.
K, when I am spraying water based in my case Createx through an Airbrush, I choose not to wear a mask. Now, if I am spraying it through a spay gun, I will have a respirator and ventilation.
@@TheAirbrushGarage I just bought one today but never saw anyone wearing a mask. I will consider it, thx for your feedback. Keep up you good work, appreciate it
This guy is createx's puppet. To get his commission 'buy the reducer dont make it" distilled water is perfect reducer, research for yourself dont trust him
Well....that is not true. I get no commission, nor am I sponsored by anyone. I only put out there what I truly believe in and what works for me. Manufacturers of paint spend a lot of time and money to formulate reducers and additives that work best with their paints..
Yknow I've looked at the 4011 thinner and I'm not sure the numerous on the cleaner and they're both exactly the same as far as what they're made of , don't know if they have any ingredients not listed but what they do list are the same even the same ratio of the listed ingredients...they are also differently priced.....what gives? I just buy whatever of the two is cheaper , whether it's reducer or clnr.
Scott, I have never used the cleaner. I use the 4011 as my reducer and cleaner. The 4011 is compatible with all of the createx paints. Just stick with that and forget the rest. Keep it simple. Thanks for the question, and thanks for watching.
I see you’re doing a 1 to 1 reducer to paint. But you’re painting on canvas. I make wood fishing lures. I’ve noticed that 1 to 1 is WAY to thin. It seems I can’t add more than about 10% reducer to 90% paint. What are your thoughts on this? Also when I add pearlescent mixture to colored paints my gun starts off fine and then begins To sputter when it sprays. “Sputter” is the only way I can explain it. It’s not longer a nice even spray it sputters even when holding it fully down. Any thoughts or help would be appreciated. Thanks for the videos
TommyGunz327, I typically use around 10 to 20 percent as well. But for people just starting out it I find it is easier to use a thinner mix. As someone get more experience the amount of reducer can decrease with less trouble and everyone will find a different sweet spot. Now if I am using a brush with a .18 or .2 needle I will be about 1 to 1 with the Wicked colors. Thanks for the comments and thanks for watching.
@@TheAirbrushGarage thanks for the reply. I have 2mm 3 mm and 5mm needles I always use the 3. I just can’t figure out this sputtering. When it starts to sputter I clean the whole airbrush gun and most of the time it won’t fix it. Maybe it’s something with the pearlescent mixture/ particles idk. Thanks though
@TommyGunz327 I have had trouble spraying pearls and metallic through my .35. Usually, when you are spraying those types of paints, it is not for detail it's to spray a base, so I use my .5.
![BRASIL vs. URUGUAY [1-1] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/-hWBAuxF1eY/mqdefault.jpg)
It's been 40 years since I've airbrushed. Your practice techniques brought back memories of how I use to warm up. Great video.
Peter, the longest break I had was 4 years it just takes a painting or two to knock the rust off. The mussel memory come back pretty quick. Thanks for watching.
That’s funny. I last used my airbrush in 1992 and I ordered a new one today after years of digital, oils and sketching. This channel is the first one I’ve found for good tips.
I just ordered an airbrush to paint gaming miniatures, this was super useful practices to start with as I learn the basics of setting base layers on models.
LGB, I am glad you found the video helpful. Best of luck with the airbrush. Just be patient with it. Thanks for the comment and thanks for watching.
Another great one I just have to gkeep getting the practice in
Thanks, Dan. Just keep at it, and soon you will be doing amazing things.
Had to return for a refresher! Thanks again for everything you do! 😃
TAAS, that is so nice of you to say thank you.
I am about to buy an air brush, but before I do I wanted some info. Thanks so much for sharing!!!! I will now embark on my new learning curve
Hi Chad and Jillian, What airbrush are you thinking of buying and what type of work are you interested in doing?
Great teaching skills, sir. No pretense, no lofty attitude and you explain techniques in a way even I can grasp...yes, even this old man. Clear and concise instruction which will help me move past the training wheels. Thanks for your help, Dan. Regards, Cork
Thanks Cork, that is not only very nice of you to say but it is very helpful. It comments like yours that make want to keep making videos. keep on practicing and enjoy the journey.
Just got my airbrush for Christmas (2022) and am really looking forward to using it! Thanks for the tips!
Great tutorial! Getting ready to start again. It’s been a number of years. Looking to see where I’ll go with it. Retired now so have a lot more time. Anyway Great video. Thank you
Asharay, I am glad you liked the video. I'm sure you are going to do great. Enjoy retirement. Thanks for watching.
@@TheAirbrushGarage yep I started in the 90’s so I remember the old ones at the Atlanta Expo .. then life happened… but I still have all 5 airbrushes and most of the paints are still good amazing… Createx and Golden. I’ll keep watching to learn some new tricks. You are such a Blessing and Legacy to the airbrush community. Happy Creating
Great video again. I’m having a problem that when I put a new needle in it’s dragging really bad on the little brass screw in the gun so when I pull the trigger back the needle is staying back
Phil. If you are talking about the needle packing nut inside the brush in front of the trigger, then it sounds like it is the wrong diameter needle. Or there is paint stuck in there.
great for me to learn I dont think you are a famous air brusher but you briallent teacher thankyou
Craig, lol. You are correct. I am not famous but I do get the most enjoyment out of teaching and helping others that want to give airbrushing a try. Thank you for such kind words and thanks for watching.
So useful. Really appreciate the way you provided the details in a way that was easy to understand. Great video.
Thank you, CM. I am glad you liked the video. Thanks for watching.
Thank you soooo much! I will learn how to airbrush thanks to your fantastic videos! I really appreciate it, and hopefully one day I will be able to inspire others as you do.
Thank you that sphere looked great and it was so simple .
RL, I'm glad you liked it. Thanks for the comment and thanks for watching.
@@TheAirbrushGarage I just subscribed and looking forward to your content great video
Dagger stroke tutorial was wicked! Thanks Dan!
Thank you, if there is other topics you would like to see please let me know. Thanks for watching.
Dan - The Airbrush Garage
I’ve learned to paint cars, but never done airbrushing. I just bought one from a cheap website, and it didn’t work even after reducing the paint it wouldn’t spray. I bought a more expensive one from harbor freight, and it sprayed better than the other one. I was really trying to get an Iwata but the prices deterred me from that 😅. Thanks for the tips I found the airbrush rather harder than a car paint gun, but it may all be due to the airbrush gun I have being cheaper.
Kevin, the airbrush is definitely a different than a spray gun. It really is just a matter of getting the paint to flow and learning trigger control. Here is two videos that might help. ruclips.net/video/XnbRkeYBVyY/видео.html ruclips.net/video/jlm2OMU7fbo/видео.html Good luck and keep practicing.
Doubles thumbs up. Thank you!
Thank you, Kurt's. I appreciate you watching. Just give me a shout if you ever have any questions.
Add reducer first is what I learned. It so the paint mixes better with the reducer. Adding paint will let the paint stick to the side of the cup. I still do the practice drill. I have been airbrushing just as long as you.
Thank you for the comment. And yes that is great advise, thank you for pointing that out. Thanks for watching.
Waiting for my air brush and equipment to learn these techniques. You are easy to listen to and I hope to learn more.
I don't know if you ever used them, but i would recommend trying acrylic inks. They have extremely vibrant colors, great coverage and need no reducer unless you want to reduce the opacity of the ink.
That said, great video, great warm up routine!
Gazes, I have not used them. I have a friend that uses them on his metal art he loves loves them and they look great. At some point I may explore them. Thanks for the comment and thanks for watching.
I've only just discovered you, thanks so much for sharing your knowledge with us. I look forward to progressing through your videos and ultimately learn how to master an airbrush
David, that is very nice if you to say. All i can say is... be patient, try not to get to frustrated. An Airbrush is a finicky little tool. And...practice, practice, practice. Enjoy the journey. Thanks for watching.
@@TheAirbrushGarage Could you do a short series of step by step vids for rank beginners like me? There's nothing out there. IE: start with a simple design that comprises of easy brush techniques, then slowly introduce more complex brush work with each video?
@@davidcadman2182 David, excellent idea. I will. Thank you.
Got to get home and start practice😊
Bent, that's what it is al about. If you think about it, every painting we do is just practice because you learn something on each one. Thanks for the comment, and thanks for watching.
thanks for sharing your knowledge and all your great videos, they have been super helpful stepping into airbrushing
Do I need to thin chroma polyurethane airbrush paint? If what should I use. If it’s a matter of what I am painting fishing lure
ETLFC, I am not familiar with Croma but it is the same for anything you put through an Airbrush. It has to be thin enough for you to get consistent flow. Most paints are not thin enough right out of the bottle, but your airbrush tip size will play a factor as well. It really is a matter of experimenting to find that sweet spot. I hope this helps and thanks for watching.
Thanks for sharing your knowledge bud!! I really appreciate it.
Thanks Eagle Eye. I really appreciate your support for the channel.
Great explanations!
Glad it was helpful!
You give me some nice ideas to go on practice lidel by lidel thanks for that ❤
Martijn, I am glad you liked the video. Thanks for watching.
Dan could you do a video on what airbrush ti buy. One much like the one you did on compressors. Thanks t plaisted
Will do
Nice instruction. Can I use my shop air shop compressor for a small gun like this? Thanks
Truth, sure. The tank can never be too big! Lol. No matter the air source, you are going to be using around 20 to 30 psi for gravity feed and around 40 to 50 for siphon. Hope this helps, and thanks for the question and watching.
@@TheAirbrushGarage Thanks I have a good air compressor water and dirt traps on it.
This is brilliant. Thanks for the clear help.
ZX6ROD, This is where it starts. Just keep practicing and before you know it you will be creating some really cool stuff!
When I saw you mix in your cup, I knew you were the guy for me
Steze, lol. Thanks. Enjoy the channel. I really appreciate the support.
Hey Dan question all powerful AIRBRUSH OZ ! I ran out of 4011 reducer can I use distilled water until I can get to hobby lobby ??
Sure, it works better with illustration than it does with Wicked. Good to hear from you.
@@TheAirbrushGarage you too my friend how’s everyone I hope all is well and you and the family are healthy!! I’m still going and practicing your technique and teaching everyday I’m doing a lot of Chicano art with the girls who have the clown make up on a lot of people like that and doing skulls a whole heap I just watched your video on my first skull with the peel back paper stencil ! Let’s open a tshirt and hat airbrush shop in Myrtle beach together !! I told my wife we went down there for cheer and our daughter and no one does airbrush down there !! It’s all spray paint pictures ! We’d clean up !! Seriously I hope your doing AWSOME me and the wife always pray for our family and friends to god gives you and yours health and wealth forever ! Can’t wait to see your next video buddy talk to you soon
Forever your student
And even longer my friend
Marc
Hi Marc. I am doing well. I've been busy with family and life along with remodeling a bathroom. I am planning on coming out with a new series of videos soon. As far as starting any new business, those days are over for me. I am planning to retire in about 5 years and spending a lot more time with my grandkids. Thanks for checking in. I hope you and your family are doing well and keep on airbrushing!
@@TheAirbrushGarage my friend grandkids and family are what makes life AWSOME ! So enjoy it all I love time with mine and I just remodeled our downstairs with hardwood floors and it was an absolute crap show so I know your pain but thank you and oh I just got 2 big bottles of 4011 reducer and my wife for my birthday ( belated) ( August 1 ) she is buying me a new airbrush an Creos ps771 ( is that a good one ?) with the 0.18 needle it was either that one or a Iwata side feed TAKUMI with a 0.3 , so I’m excited !👍🏻👍🏻 ! Talk to ya soon my friend
Your friend
Marc
I’m bout to start airbrushing journey thanks for this video and tips subscribing !!
Julio, thanks for watching and subscribing. I will do my best to put out helpful and informative content.
Thanks for the tutorial and tips! I am about to start my journey in airbrushing and you are a good teacher. I have subbed and will be watching. 😀
Thank you for the kind words. Let me know what you would like to see for future videos. keep practicing, thanks for subscribing and watching.
I personally like working with the 4012.
pocdabeno1974, I had no problem with the 4012 with the wicked, I used it for years. But it did not work well with there clear and Candy 2o. So they discontinued the 4012 and went back to the 4011. Eventually we won't be able to get the 4012. Thanks for the comment and thanks for watching.
Thanks! I love your videos
Correct - Warm ups are VERY important - every artist and athelete from musicians, dancers to baseball and football (you name it) do it before a live performance and remember YOUR live performance is on the canvas you working with
Hi Dan, good video, I would like to see a video on the thought process in shading and highlighting,thank-you
Thanks for the comment and letting me know what you would like to see. Keep a look out in the next few weeks for that video, just a reminder I upload a new video every Saturday. Thanks for watching, much appreciated.
@@TheAirbrushGarage good to know!👍✌
Excellent video 💯Thanks
Thank you very much ❤
Retro, I am glad you liked the video. Thanks for watching.
Thanks this was helpful!
Pro tip, never leave finished pieces behind your workspace.
Thanks mike
great videos. Thanks. I have a question. Is it possible to paint oil paintings with an airbrush where the main medium is linseed oil? The pigment should be very transparent to have the right viscosity. What parameters should the airbrush and compressor have for this type of work? thanks a lot
Adaam, I have no idea as I do not work with that type of medium. But, an airbrush will spray anything that can properly flow through it. Since it is oil based paint, make sure the brush is solvent proof, meaning it has the Teflon needle packing and not a rubber O ring because you will need a solvent cleaner to clean oil based paint. Most brushes are solvent proof, but make sure before you buy one. hope this helps.
I know this is sort of an off comment but I’ve been searching out content that is not political. I’ve always been an artist and want to spend my attention on something wholesome. This is one of the first videos I’ve found with this new goal in mind. Thank you. Can’t wait to get a brush. Should speed up my crafting and give me a new medium to practice.
Thorny, that is is so nice of you to say. If you decide to jump in to airbrushing just remember to take your time, practice a lot and you will do amazing things. If you ever have any questions I am always willing to help. Thanks for watching.
excellent vidéo Dan !
Laurent, thank you so glad you liked it. Thanks for watching.
Thank you! :)
How do you get such tiny and crisp lines without any overspray? Are you having to constantly adjust your psi or you keep it at a constant 30?
Hi Nina. I spray at 27 p.s.i. It is a combination of trigger control and speed. If you are having problems at that pressure, take it down to 15 p.s.i. and add a few more drops of reducer. I hope this helps, and thanks for watching.
My 9 year old wants to get into canvas airbrushing. Do I need a booth or PPE? We have a little nook where we dont mind if she makes a mess.
Joshua, I am assuming you are using water-based paints like Createx Illustration colors. I personally would use protection with my 9 year old. Here is a link for what I would use amzn.to/3uw51IG an exhaust fan with a filter would also be helpful, but the mask at a minimum. I think that's awesome your daughter wants to give airbrushing a try. If you ever have any questions, just let me know. I hope this helps and tell her I said to be patient and practice, practice, practice. Thanks for the question, and thanks for watching.
Thank you!
Good stuff thank you
Thanks Brian. I appreciate you watching.
What’s the reason for keeping air flowing all the time when airbrushing
JP, one of the biggest reasons for tip dry is shutting the air off and then the paint. Air on, paint on, paint off, air off. And you will minimize tip dry. I hope this helps. Thanks for the question, and thanks for watching.
Wow! Ty
Hi Dan; where can I get the water separator like the one you use on your airbrush? Thanks.
Dan, I am an Amazon guy for the most part but I do like Spraygunner as well. Here is a link to the water trap. amzn.to/3pKEJwH Thanks for the question and watching.
Hi Dan, I just found your channel yesterday. I'm over in the UK and I'm loving your videos - you are teaching with sincerity and not arrogance, which is brilliant. I'm no artist at all, and I've just started my airbrush journey, so I'm happy I found your channel.
Lainey I am so happy to hear you like my videos and welcome to airbrushing. You don't have to be a great artist to be good at airbrush and I bet your better than you give yourself credit for. Remember,,,, just be patient, practice and you will get it. Thanks for watching.
Thx for the video. To clarify, when you make dagger stokes, you get the thinner part of the dagger by moving the gun closer to the surface, or by reducing the air flow? or by a combinatino of both?
Arsen, both. As you move closer to the surface you are also in the process of triggering the air off at the end of the stroke. Make sure the brush keeps moving after the paint is shut off. And! At the end of the stroke only shut off the paint not the air. Hope this helps and thanks for the question and thanks for watching.
Can I use nail polish remover as a reducer? I'm also considering using dish soapy water?
Cnd, I have heard of people using a lot of different things. Early on I have tried just water and then water and dish washing soap but I have found and always recommend using the suggested reducer that the manufacturer specifies. In my case using Createx I use 4011. It really is not that expensive and it last a long time.
@@TheAirbrushGarage okay thanks
Do you remember what air compressor you were using at the time for this video?
Generac43, it was a 2 cylinder Master here is a link amzn.to/3NVez5p. I now use my 2 gallon Fortress. I have a review on that as well if you're interested. Thanks for the question, and thanks for watching.
@@TheAirbrushGarage great! Thanks for your reply.
aways get some overspray next to line, will this be the case for airbrushes?
43rocket, not sure what next to line means but overspay is very minimal because of the small volume of paint being sprayed and the low airpresure. If you are referring to the atomized dots of paint outside a pass with a spray gun then no. Airbrushes are designed to spray in a circular pattern and can produce very fine lines. Hope this answered your question. If noted me know. Thanks for the question and thanks for watching.
@@dancuccurullo8453 yes I get some overspray next to a straight sprayed line all the time with black createx paint.
Yes that is normal but you can get a fine line by getting close to your substrate. Also, air pressure and how fast you move your airbrush will play a roll. So basically the closer you get to your surface the tighter the line should be.
@@TheAirbrushGarage should I mix paint in the airbrush or outside in a separate cup? if you dont put thinner in brush first the paint wont be thinned enough?
Rocket, it really is a matter of preference. I do it both ways. If I am spraying a straight color I mix in my brush. if I am trying to match a color I will mix in a cup.If I mix in my airbrush I mix, backwash, mix. I try to put reducer in first but if I don't I doesn't really matter. Thanks for the question and thanks for watching.
Hey Dan it’s Marc again hey I just looked and I texted you I was missing my rubber O ring on my Iwata eclipse and damn I looked on my Iwata hi line HP CH AND THAT WAS MISSING THE O RING ALSO BEHIND THE HEAD CAP !! What the hell I spent $300 on that and they ripped me off for the O rings on both my Iwata guns!! I’ve been running them with no O rings behind the head cap !!
Good morning brother Dan, I noticed you said in between your tutorial exercises. You can do little projects to see how far you’re coming along. OK my question is I have a Canon 98 pound 18 by 24 drawing pad. I was told 140 pound drawing pad is better. The 98 pound 18 by 24 drawing pad is what I’m doing my exercise tutorials on dots, daggers and lines ect. OK this is the question what weight drawing pad do I need to be using in order to do the clearcoat and where do I get the clearcoat from to make the finish shine or glossy!!!🎣🎣🎣
Sounds like the paper you are using is fine and as long as it is glossy paper you can clear coat it. For doing actual projects on an airbrush paper I use a product called Tera Slate. As far as clear on small projects I just use krylon in a can.
@@TheAirbrushGarage Hey brother Dan, this is not glossy dull and soft. It’s like kind of heavy 98 pound drawing pad ahh it’s like thick corn bread paper I use to use in elementary school you know when you was learning your ABCs. But it’s okay I think I will go and buy me a Gesso canvas. Already prepped for airbrushing then I can clear coat that right. I will check on the Tera Slate what clear coat do I use for the canvas and the Tera Slate. Thanks brother Dan!!!🎣🎣🎣
Yes you can clear your art work on canvas. And unless I am doing a motorcycle or a vehicle I just use Krylon clear gloss in a spray can.
@@TheAirbrushGarage I seen the Terra Slate I will order me some which size do you use 8 by 11 Dan. Also I see 9 by 12 water color drawing pad 140 pounds.
@@TheAirbrushGarage Thank you brother so much. I have a color wheel now and Steve Driscoll flesh tone set. I have some everything brother 3M super 77 a bunch of different French curves. Bunch of Createx Wicked colors a Kodak mini LD projector Lunma 75 $169. 18 by 24 stencils I have been ordering a lot of stuff cause I want this airbrushing BAD brother. Thank you again brother I don’t wanna go-on-and-on.!!!🎣🎣🎣
Thanks
will you bin that canvas or clean it up?
Kaine, I spray createx white sealer over it and reuse it. Now...if I was going to paint something that I was going to employ scratching techniques I would use a fresh canvas. Thanks for the question and thanks for watching.
Thanks for the "tutatorial."
Thanks Steve, much appreciated.
Paint on, paint off, Blood in, blood out😂.
Thanks man.
Pahel, lol. Thanks for the comment, and thanks for watching.
@@TheAirbrushGarage I have a question.
Is there a significant difference between the performance of an Eclipse and a generic version of it?
@PahelBrunis it depends on the price point. The $40 brush is not equivalent. But there has been better competition surfacing lately to compete with the major names I did a review on a brush that I think is equivalent to my eclipse and has a better price point and you get more accessories with the brush than you do with the eclipse. Here is a link. If you get a chance, check it out. ruclips.net/video/RFi3cxS-SFQ/видео.htmlsi=tAPkjkmnvpH1TMwG
@@TheAirbrushGarage Thank you for the fast response .
New Subscriber! Great info!
Thanks FF, I appreciate the support.
I'm trying to learn how to defeat tip dry on the needle of the air brush. I've tried everything I could look up! Still platters and or just no paint flow. Even "ready to spray" primers just have not worked. Anyone have a tip?
Hi Rob, sorry to hear you are having problems. Take a look at this video. Let me know if this helps. ruclips.net/video/XnbRkeYBVyY/видео.html
Great
Good tutorial but wounder how the finished work piece is going behind the job your doing.
William, alot of people comment about their concern about the work on the wall. They are all throughly cleared and have been there for years. I have them there for a back drop. I appreciate you giving my videos a look. I appreciate it very much.
Does createx sponsor you?
Createx does not, but they do send me things like banners and shirts.
Hey was that just plain canvis or preped
Ronald, the canvas that art stores sell are pre-primed with an acrylic gesso. I never buy un prepped canvases. I have seen others prep canvases with their own gesso but that would be on raw canvas. Not sure why someone would do that. It is just to easy and cost effective to buy pre-prepped online or in an art store. Thanks for the question and thanks for watching.
Hi Dan.
I bought my first airbrush (Iwata NEO) and I'm having issues with splattering. It's fine, but its there and I can't seem to get it to go away. I'm using the Tooty compressor from Spraygunner running around 15 psi.
Any feedback would be appreciated.
Increase your air pressure to 25 psi.
And make sure your paint is reduced enough.
@@TheAirbrushGarage thanks, Dan!
Try 18-25 psi mix your paint well enough , and make sure the needle is not blocked by any paint also try not to let go of the air hard either that will cause a splatter as well , best of luck
Sorry am a newbie, what is a reducer?
Adequate, a reducer is to thin the paint or to put it another way it is it increase its viscosity. If your paint is too thick, the reducer thins ot out to make it flow better. Hope this helps. Thanks for the question, and thanks for watching.
@@TheAirbrushGarage Thanks for answering so quickly I really appreciate it. Also do I need to add thinner to paint if I am using a primer or airbrush straight flat colours?
@Ade Adegoke it just depends on the flow. If it's not coming out of the brush "nicely," then reduce "thin" until it does. You will get good at ot. It just takes practice and time. There is no magic formula. Lol. If you ever have any questions just let me know.
I am from Québec,so am pack franchement Maubert you havé à tranlator?
Question: I build plastic model airplanes. I need to paint the panel lines of the plane. I can’t seem to follow the straight panel lines. My pattern comes out wavy. Any suggestions ? Thanks.
Art, yes. There is a misperceptuon that airbrush needs to be freehand. In reality a method should be chosen to achieve the desired effect. With that said... In your case I would tape off each panel line and simply spray the desired color. You can see this methid in my rivet video. Or you can use a straight edge from a free hand shield. Hope this helps and thanks for the question and thanks for watching.
@@dancuccurullo8453 ruclips.net/video/w5guQ5LaW2s/видео.html
Use a black sharpie, works awesome and the fine tip follows the panel line valley.
You mentioned a few times the needle or line width size as 3.5 mm...Do you mean .35mm?
Judemichael, wow I did not pick up on that. Yes, I miss spoke. It is of course .35. Being a one man show is tough sometimes. Thanks for the correction and thanks for watching.
@@TheAirbrushGarage completely understand..I've said things like needle cap when I meant nozzle cap or vice a versa..
You have real good tutorials man , don't sweat it..
What surface are you spraying on
Francisco, thanks for the question. That is stretched canvas. Thanks for watching.
Just be wary of brand fanboi-isms. Iwata's are Illustrator brushes mostly and are designed and used over seas as such with Inks and water based media. The .3 or .35 like the eclipse are good for acrylics but nothing much thicker like enamels, which at .3 almost need to be way over thinned to push through. Iwata brushes popularity and small needles were why Testors enamels got such a bad rep, that and people not knowing how to properly thin enamels. Iwatas weren't designed for thicker Enamels and luckily I have amassed a large stash of formerly tossed Iwata Airbrushes because people thought they were ruined by the enamels being left in them. I still find gunked up ones for 5 bux at goodwill or thrift stores that are basically brand new.
Basically you decide what you are going to work with and get an appropriate Airbrush for said needs. .5 needle units are for thicker media and can still get fine details but are best for large area painting. .1 to .18 are for inks mainly, washes and water colors. .2 to .35 works will all media up to Acrylics and Lacquers and thinner Oils (Not Thick oils or enamels), though inks can be used they will require PSI adjusting and in this mode mostly broad coverage use. .5 for Enamels and Oils. This isn't Holy scripture just a general guideline, you can use your brush for many medias out there but will have to play with mixing ratios and PSI just note you can thin only so far before pigment loss and paint types not behaving correctly.
In no way is Iwata better or worse than Badger, Paasche and other mid range brand equivalents, all are quality tools and some simply have a better value per dollar in their packages than others. Iwata is like Apple, you pay a lot more for the branding for what's included. You can't go wrong with having an Eclipse lying about, though my Patriot 105 with all 3 needle sets is my main workhorse and the H&S Infinity I have for the small detail work as I mainly paint MOdel Cars/Planes and wargame mini's, the Eclipse is just too large in most cases other than coating and shading.
Animalyze71, Wow! Love the the break down and review. You obviously have been doing this a long time and I appreciate you sharing you thoughts and experiences. Perspectives such as yours helps out other viewers that visit the channel. Thank you for taking the time to share this. Much appreciated.
very helpful information ！
What other namebrand paints do you think is good for beginners. And I will be painting guns other kinds of hardware around the home on paper on canvas, etc..
Hi Robert, I have only used createx paint since I started 20 something years ago. If Createx is not what you want to use, i would research paints like Velero and No name. Thanks for the question, and thanks for watching.
Thank you so much for the information. I got into this to do firearms so I was going to use mostly Cerakote or Duracoat, but after watching your videos and other videos, I would like to try more although I do not think I am as artistic as you all, but I thought as I am getting older I would like to try. I subscribed to your channel and will be watching all of your videos. You have a great technique and teaching ability.
Thank you, Robert. That is very nice of you to say. You do not need to be an accomplished artist to airbrush. What is important is that you learn some tricks and techniques and learn to work with the paint that you are going to use. If you ever have questions, just hit me up.
Dude…. The overspray is sooooooo close to your nice stuff right behind you.
need a bit more detail on the gun itself i.e. tbe nozes and needles
Fred, I have videos reviews on all the airbrushes I use. I break down each brush and take a look at each component. Check them out if you get a chance. Thanks for watching.
Why my compressor goes on and off during the paint and it wont come back on, is that normal or what I’m doing wrong
Soheilia, it sounds like you have a tankless compressor. It only delivers air when you press the trigger. So yes, that is normal. Thanks for the question and thanks for watching.
Thanks for showing how to start. But you scare me. you have beautiful artwork right behind where you are spraying.
Leonard, Don't be scared. lol. they have been there for years and the are well cleared. Thanks for watching. Much appreciated.
Right from the beginning I don't want to finish this video. The first thing you should add if you're going to mix in the cup is reducer. I mean it's literally basic physics😢
I am not sure about the physics part. lol. But I have been doing it both ways for so long it is just my opinion that it really doesn't matter. Once both are in the cup I mix it with a little mixing stick and the a quick back wash. That's what works for me. Regardless of which one goes first it still needs to be mixed before it gets sprayed. I do appreciate your method and perspective. Thank you for the comment and thanks for watching.
and should have a mask!!!!!!!!!!!
hahahaah tutta la vernice sui dipinti dietro hahahaha poco professionale XD
🤣🤣🤣🤣🤣🤣
No mask needed?
K, when I am spraying water based in my case Createx through an Airbrush, I choose not to wear a mask. Now, if I am spraying it through a spay gun, I will have a respirator and ventilation.
@@TheAirbrushGarage I just bought one today but never saw anyone wearing a mask. I will consider it, thx for your feedback. Keep up you good work, appreciate it
This guy is createx's puppet. To get his commission 'buy the reducer dont make it" distilled water is perfect reducer, research for yourself dont trust him
Well....that is not true. I get no commission, nor am I sponsored by anyone. I only put out there what I truly believe in and what works for me. Manufacturers of paint spend a lot of time and money to formulate reducers and additives that work best with their paints..
Yknow I've looked at the 4011 thinner and I'm not sure the numerous on the cleaner and they're both exactly the same as far as what they're made of , don't know if they have any ingredients not listed but what they do list are the same even the same ratio of the listed ingredients...they are also differently priced.....what gives? I just buy whatever of the two is cheaper , whether it's reducer or clnr.
Scott, I have never used the cleaner. I use the 4011 as my reducer and cleaner. The 4011 is compatible with all of the createx paints. Just stick with that and forget the rest. Keep it simple. Thanks for the question, and thanks for watching.
I see you’re doing a 1 to 1 reducer to paint. But you’re painting on canvas. I make wood fishing lures. I’ve noticed that 1 to 1 is WAY to thin. It seems I can’t add more than about 10% reducer to 90% paint. What are your thoughts on this? Also when I add pearlescent mixture to colored paints my gun starts off fine and then begins To sputter when it sprays. “Sputter” is the only way I can explain it. It’s not longer a nice even spray it sputters even when holding it fully down. Any thoughts or help would be appreciated. Thanks for the videos
TommyGunz327, I typically use around 10 to 20 percent as well. But for people just starting out it I find it is easier to use a thinner mix. As someone get more experience the amount of reducer can decrease with less trouble and everyone will find a different sweet spot. Now if I am using a brush with a .18 or .2 needle I will be about 1 to 1 with the Wicked colors. Thanks for the comments and thanks for watching.
@@TheAirbrushGarage thanks for the reply. I have 2mm 3 mm and 5mm needles I always use the 3. I just can’t figure out this sputtering. When it starts to sputter I clean the whole airbrush gun and most of the time it won’t fix it. Maybe it’s something with the pearlescent mixture/ particles idk. Thanks though
@TommyGunz327 I have had trouble spraying pearls and metallic through my .35. Usually, when you are spraying those types of paints, it is not for detail it's to spray a base, so I use my .5.