Got one of these and really impressed with the build quality. So far working perfectly with over 50miles on it. Chassis stiffness is awesome! Ran a 4000kv on 3s through it with no issues. Currently.runs holmes 550 35t with 1080 and pitbull rock beasts, excellent machine.
I built a rig off that chassis. It is pretty sweet. Turned it all around so battery is up front. Didn't use portals just scx10 aluminum axles. Used 120amp esc sensored with like 2200kv motor. Used 240 degree 35kg servo for like a robot arm, you can turn the rates down drains less energy from the system. Its a slow moving servo, but the torque and digital coreless gives it so much control. I think i ended up buying those same drive shafts for it. Bought a 6 channel radio and receiver for it for later add-ons. The tires i already had aluminum beadlocks, metal front and rear bumper. Got a plastic transmission case with hardened steel gears. Have aluminium case on the way. Weighs 7-10 pounds. Nothing gets hot on it as far as electronics go and have yet to have a brown out do to power consumption. After it was said and done, got a VW baja bug body on sale for like $20 at hobby shop, $15 in paint, $2 in tape. The total cost of my built was less than a brand new all plastic, bone stock scx10 deadbolt. When i added it up and saw that i built another a little different with front mounted motor/transmission and mid transfer case. If your able to mount that battery up front it really makes a difference. The truck is solid! Only thing different between your vid and my truck is the axle, trans case, tires (1.9's here), shocks (120mm because im not running portals), and the power system. I would run an 1/8 scale power system or a beefy 1/10 scale system. I almost burned up a 37 turn and 55 turn 540 brushed with 60amp (120 burst) esc. If you like "crawling" as much as i got into it your gonna love that truck!.!.!
I built an identical chassis bit by bit from eBay only differences are the links, portals, bumper and my chassis rails are actual SCX10 jobbies. Obviously fitted my own wheels and electronics. And dont have the diff guards on my silver axles. Havnt actually run mine yet so interested to see how it performs!
I would seriously stick a short wheel base XJ Jeep Cherokee hard body body on it as they are quite literally bulletproof And they fit literally perfect on the Scx10
Great Steve..i tell the missus no more crawlers after i bought the RGT Pro and then you go and show us this...that is freakin awesome mate!!! we need to see this one on the rocks for sure-another cool vid once again ...thank you!
@@RCTanksTrucks247 i was thinking its 600 or more. 400 is ok if you look what a plastic Axial crawler cost its even cheep 😄👍 it even has alloey rims !!!
Their flagship Ultra build is right around $830. Under half that $2000 estimate. $830 for a high quality rig with unmatched support and continuous improvement isn't a bad deal for those who can afford them. The price of admission is fairly steep but arent all premium things in life? The 410s are basically a fully upgraded truck right from the box equipped with strong and reliable parts. The ZD trucks are a conglomeration of copied/knocked off parts and outdated designs. They are similar in look possibly to some but the 2 play in entirety different leagues.
@@highlandcrawler calm down. the ultra isnt 100% metal and carbon. now imagine if vanquish made a 100% metal and carbon crawler. how much would they charge? get it now?
@@jessie38supercharged Calm down? I'm just typing an opinion and mellow as can be. Supping morning coffee and taking in some YT vids bud. Just because something is "all metal and carbon" unfortunately doesn't automatically make it better. The carbon frame is made from low grade carbon and a copycat of the scx. What's to desire about it? It offers no geometry upgrades or extra mounting options over a stock decade old Axial frame that's at least steel and weldable. I understand the bling factor of carbon but I wouldn't write home about this frame. Who wants metal rodends? Seriously lol! Have you ever ran them? Slop out in the first few runs then start falling apart shortly after then get replaced with a revo end. Whats the thread on those links? Tiny 3mm grubs that mostly everyone moved away from? There are places for metal, plastic, carbon etc. but just because a vehicle is made with the majority of one thing does not equate to automatic superiority or the best performance. The term "all metal" makes me cringe when I see it having been down that road myself years ago. Vanquish would never build a comparable rig to these as they are not targeting the same audience but I will agree with you. If...IF they did build a rig part for part in similar materials it would be exorbitant in price. Remember the Ripper? OUCH!!!
They did come pretty close with the Ripper but that's in a complete different arena to the "all metal" rigs and even the VS410s. The chassis and body sets were $1700 area iirc and runners went up over $5k. I get your point on price but I'm figuring in perceived value also. For me a $400 pile of import aluminum junk parts vs a $900 quality rig that will last me for years and be well supported is an easy choice. Say your at Axialfest or scale nats and you snap an axle. Mosey up to the VP booth and guaranteed they will have you back in action in minutes. The $900 investment just paid it forward for ya. What happens when the import breaks? There's no booth and nobody coming to your aid. Your on your own to try and source parts. Sometimes easy but sometimes maddening. Personally the choice is throw $400 in the trash vs invest $900 into my hobby. Admittedly I've thrown the $400 away in the past and learned some valuable lessons.
Nice! But I wonder about the width. On an scx10, the skid plate is wider than the cross braces, so how does this line up? Does it have a narrower skid plate than standard?
Hi. I buyed two kits on rcmart, for crawling. Good chassies and good waith to it. I used two jeep cheokees bodies in hard plastic, who works well. One with a bed, other closed
I've been thinking about getting this rc for a good while now. But I'm new to the crawling thing so I don't know if I want to spend that much money on a new rig
Great chassis .. super cool .. great engineering .. love it .. how about an old Land Rover body .. I'm a Land Rover fan .. an original. keep up the good work and vids
thanks for sharing your knowledge and experience! awesome product, and you nailed it in the assembly. I may be getting one of those in a few months. Cheers, mate!
That looks nice, but as a critic, i noticed that there are some countersunk holes in the carbon, i do belive that it would be good to seal the carbon before use, it looks raw.. But as always, nice video :)
Sweet looking rig Steve. It's a bit pricey for right now. Although I'm thinking about it. I really do like it. Can you let me know about how heavy it is ? I think with that front bumper you are limited as to what kind of body you can use. Probably going to be a big one. Let me know. Love your vids keep rollin
Tires are copies of the old Venom Creeper tires. With all the great tires on the market its interesting that they chose to copy and include a decade old design???
How long did it take you to receive that bad boy? Really nice and always appreciate everything you do brother. Trust your honesty man cause not a lot are real about there reviews.
First off it's a trail truck Second metal doesnt slid on rocks Third front shock is missing bottom Fourth front axle is clocked wrong Fifth front bumper wouldnt let you climb shit . Terrible junk.
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Get it here ➜ bit.ly/35Tn6hG
Check out the huge range of cars ➜ bit.ly/3491rBs
An old school Defender body would look sick and that grill looks like its made for one.
Yeah man definitely looks similar
Got one of these and really impressed with the build quality. So far working perfectly with over 50miles on it.
Chassis stiffness is awesome! Ran a 4000kv on 3s through it with no issues. Currently.runs holmes 550 35t with 1080 and pitbull rock beasts, excellent machine.
Awesome, thanks for the info. Definitely seems like it would be able to handle the power.
I built a rig off that chassis. It is pretty sweet. Turned it all around so battery is up front. Didn't use portals just scx10 aluminum axles. Used 120amp esc sensored with like 2200kv motor. Used 240 degree 35kg servo for like a robot arm, you can turn the rates down drains less energy from the system. Its a slow moving servo, but the torque and digital coreless gives it so much control. I think i ended up buying those same drive shafts for it. Bought a 6 channel radio and receiver for it for later add-ons. The tires i already had aluminum beadlocks, metal front and rear bumper. Got a plastic transmission case with hardened steel gears. Have aluminium case on the way. Weighs 7-10 pounds. Nothing gets hot on it as far as electronics go and have yet to have a brown out do to power consumption. After it was said and done, got a VW baja bug body on sale for like $20 at hobby shop, $15 in paint, $2 in tape. The total cost of my built was less than a brand new all plastic, bone stock scx10 deadbolt. When i added it up and saw that i built another a little different with front mounted motor/transmission and mid transfer case. If your able to mount that battery up front it really makes a difference. The truck is solid! Only thing different between your vid and my truck is the axle, trans case, tires (1.9's here), shocks (120mm because im not running portals), and the power system. I would run an 1/8 scale power system or a beefy 1/10 scale system. I almost burned up a 37 turn and 55 turn 540 brushed with 60amp (120 burst) esc. If you like "crawling" as much as i got into it your gonna love that truck!.!.!
I can smell the scents of the newly unboxed rubber wheels .
I built an identical chassis bit by bit from eBay only differences are the links, portals, bumper and my chassis rails are actual SCX10 jobbies. Obviously fitted my own wheels and electronics. And dont have the diff guards on my silver axles. Havnt actually run mine yet so interested to see how it performs!
Awesomeness
Nice kit in my dream😂😂😂
Very nice. The slanted bumper actually goes onto the rear.
Hmm looks weird
I would seriously stick a short wheel base XJ Jeep Cherokee hard body body on it as they are quite literally bulletproof And they fit literally perfect on the Scx10
It is a great looking chassis, with that bumper its a shame no one makes the M715 Kaiser Jeep truck body.
Great Steve..i tell the missus no more crawlers after i bought the RGT Pro and then you go and show us this...that is freakin awesome mate!!! we need to see this one on the rocks for sure-another cool vid once again ...thank you!
Haha sorry mate 😀👍
Get that beast on the rocks Steve. I want to see it perform please. Great videos as always!
Thanks man
WOW!!!! looks like a beefy rig for sure Steve can't wait to see how it preforms on the trails/rocks thanks for sharing happy bashing my brotha
Much appreciated man.
Black Troopy body!
Very nice set of chumpers you got there
Haha thanks man
Wow only 400 USD. May have to get one. Cant wait to see it go👍
Decent price for what you get
@@RCTanksTrucks247 i was thinking its 600 or more. 400 is ok if you look what a plastic Axial crawler cost its even cheep 😄👍 it even has alloey rims !!!
"It's like shit to a blanket" - bahahaha I'm dying.
😀
You've got enough room to actually run a servo winch just behind your bumper mount
Just ordered this thinking about getting a Land Rover or nice old power wagon like body👌🏼
Sweet
If this was made in america it would cost $2,000. coughVanquishcough
Their flagship Ultra build is right around $830. Under half that $2000 estimate. $830 for a high quality rig with unmatched support and continuous improvement isn't a bad deal for those who can afford them. The price of admission is fairly steep but arent all premium things in life? The 410s are basically a fully upgraded truck right from the box equipped with strong and reliable parts. The ZD trucks are a conglomeration of copied/knocked off parts and outdated designs. They are similar in look possibly to some but the 2 play in entirety different leagues.
@@highlandcrawler calm down. the ultra isnt 100% metal and carbon. now imagine if vanquish made a 100% metal and carbon crawler. how much would they charge? get it now?
@@jessie38supercharged Calm down? I'm just typing an opinion and mellow as can be. Supping morning coffee and taking in some YT vids bud. Just because something is "all metal and carbon" unfortunately doesn't automatically make it better. The carbon frame is made from low grade carbon and a copycat of the scx. What's to desire about it? It offers no geometry upgrades or extra mounting options over a stock decade old Axial frame that's at least steel and weldable. I understand the bling factor of carbon but I wouldn't write home about this frame. Who wants metal rodends? Seriously lol! Have you ever ran them? Slop out in the first few runs then start falling apart shortly after then get replaced with a revo end. Whats the thread on those links? Tiny 3mm grubs that mostly everyone moved away from? There are places for metal, plastic, carbon etc. but just because a vehicle is made with the majority of one thing does not equate to automatic superiority or the best performance. The term "all metal" makes me cringe when I see it having been down that road myself years ago. Vanquish would never build a comparable rig to these as they are not targeting the same audience but I will agree with you. If...IF they did build a rig part for part in similar materials it would be exorbitant in price. Remember the Ripper? OUCH!!!
@@highlandcrawler but what if vanquish made an all metal and carbon kit?
They did come pretty close with the Ripper but that's in a complete different arena to the "all metal" rigs and even the VS410s. The chassis and body sets were $1700 area iirc and runners went up over $5k. I get your point on price but I'm figuring in perceived value also. For me a $400 pile of import aluminum junk parts vs a $900 quality rig that will last me for years and be well supported is an easy choice. Say your at Axialfest or scale nats and you snap an axle. Mosey up to the VP booth and guaranteed they will have you back in action in minutes. The $900 investment just paid it forward for ya. What happens when the import breaks? There's no booth and nobody coming to your aid. Your on your own to try and source parts. Sometimes easy but sometimes maddening. Personally the choice is throw $400 in the trash vs invest $900 into my hobby. Admittedly I've thrown the $400 away in the past and learned some valuable lessons.
pinion gear was moosh aluminum, replace it with hardened steel if you want it to last.
A proline metric body sick on that
Nice! But I wonder about the width. On an scx10, the skid plate is wider than the cross braces, so how does this line up? Does it have a narrower skid plate than standard?
Waiting for part 2
Hi. I buyed two kits on rcmart, for crawling. Good chassies and good waith to it. I used two jeep cheokees bodies in hard plastic, who works well. One with a bed, other closed
Very cool. Rcmart has some awesome stuff and at great prices
I've been thinking about getting this rc for a good while now. But I'm new to the crawling thing so I don't know if I want to spend that much money on a new rig
For the price of these you can't go wrong if you plan to fully hop up in the future.
Spettacolare!!!... gran bel video!!!
Nissan 1991 GQ patrol like the one in my profile pic would look cool on there
Yeah man, nice one 👍
That's badass
Great build so far,nice video.
Great chassis .. super cool .. great engineering .. love it .. how about an old Land Rover body .. I'm a Land Rover fan .. an original.
keep up the good work and vids
Much appreciated brother
thanks for sharing your knowledge and experience! awesome product, and you nailed it in the assembly. I may be getting one of those in a few months. Cheers, mate!
Cheers man
That is a really sweet looking kit Steve 👍
Cheers man
Put a good old reliable Landcruiser body on it , that would suit that roo bar
Too narrow unfortunately
That looks nice, but as a critic, i noticed that there are some countersunk holes in the carbon, i do belive that it would be good to seal the carbon before use, it looks raw.. But as always, nice video :)
you have 107k subscribers how cool is that
that needs a proper truck body
Sweet looking rig Steve. It's a bit pricey for right now. Although I'm thinking about it. I really do like it. Can you let me know about how heavy it is ? I think with that front bumper you are limited as to what kind of body you can use. Probably going to be a big one. Let me know. Love your vids keep rollin
Says it's weighs 3.7kg on the website. Feels about that.
👑
Are you still doing the 4 cylinder rc build
Yeah man just need time and custom parts
is this the super cheap one on ebay? The gears look better than the redcat gears
No. This is the super expensive one (£313 no battery, no body, no Tx, no Rx, but with motor and esc) from Banggood .
that's a nice looking rig. so it's an aftermarket SCX10?
Pretty much
Hey bro very sick chassis for sure! I like it a lot! And thanks for the add on facebook brother!!
No worries brother
RC Tanks & Trucks 24/7 🤜🏼🤛🏼🤝
Awesome ♥️🧡💛💚❤👍
Why would they include two front-bumpers instead of the rear-bumpers? Hmm..
Yeah weird ay. More options I guess
Hey mate got a question would the 79 killer fit on that ?? Looking doing one ☝️
Superb chassis...love your walk thru!!!!
Much appreciated brother
Sweeeeeeeet!!! Man what u get for the price is unbeatable... that thing is all kinds of sexy... Cant wait to see it crawl... 👍👍
Cheers man
Ford Raptor hard body seems to be the perfect choice.
Nice
Thanks
Next part please!)))
Dodge power wagon would look sweet
There's a video on this by Goncalo Quinas ...
Yeah they do look good
Hi steve them props maybe zd racing props
The body from that rubbish crawler from last timw would look good, tyres remind me of the Mickey Thompson Baja Claw.
Binned that body and crawler already, haha
@@RCTanksTrucks247 Probably a smart move.
Tires are copies of the old Venom Creeper tires. With all the great tires on the market its interesting that they chose to copy and include a decade old design???
the second pumper is the rear pumper
Wich battery pack do i need for this crawler .
Have less plastic than my real LR defender
i think u can use hummer body for it and u can use the toyan v4 fs-v400a engine with water cooling and turbo charger
No chance far to small
@@RCTanksTrucks247 i am sure u can choose the right thing four build 👍👍👍
What type of battery do I need to buy for this body also does it include and controller
2s or 3s lipo and no electronics
That looks very expensive, love all metal & carbon mix.
Yeah it looks great
Too pretty to scratch 😲
Haha yeah
How about a Proline 1946 Dodge Power Wagon body?
Love those bad boys
What is the gear ratio one the axles drive shaft to hub
👍
The smaller bumper is for the rear
Who puts a stinger bumper on the back? Never seen one to one or 1/10th scale done like that.....but to each their own I guess. Lol
Don't think so. Normally they are on the front
Go on the website where he bought it from and you'll see the pictures how it comes stock so I guess they do put it in the back
@@jessealdo1696 just showing it comes with two front bumpers. Find me another picture with a stinger on the back and I'll apologize. Lol.
Can i have the name of the song in the intro please!?
How long did it take you to receive that bad boy? Really nice and always appreciate everything you do brother. Trust your honesty
man cause not a lot are real about there reviews.
Around two weeks from the initial order bro
Hey! I know this video is a little old but would you be willing to sell this truck? Thanks!
Fck me sideways, I wish I had the cash for that.
Saya juga membeli barang ini
The loop bar is the rear bar
No one uses them at the back. I haven't anyway
@@RCTanksTrucks247 Ok anyway that's what its for
IS IT WORTHIT TO BUILD? OR JUST BUY RTR?
Depends, I love building more than driving most of the time
Wher to buy full metal crawler sir
Check out the link in the description bro
I see a price at 311.00 is it the same kit
Like shit to a blanket...lmfao.
lc 70 series body
Nice
Old Bronco
Yeah man, nice and boxy looking
They are still selling this 4 years later. It costs as much as a complete rtr . Shit to a blanket indeed.
👍
Old ford body
Hey man what brand is that and where can get that, is it fit for my Axial scx10iii Gladiator...?
I am still new in this hobby
Not sure about the brand but the link is in the description
First off it's a trail truck
Second metal doesnt slid on rocks
Third front shock is missing bottom
Fourth front axle is clocked wrong
Fifth front bumper wouldnt let you climb shit .
Terrible junk.