Thank you, I appreciate your video and explanation for how to do this properly. I'd disassembled mine, and couldn't figure out how to put it back in the housing considering the T-valves. Everything is back together and working great.
Thank you very much! Pool tech spent 2+ hours trying to re-seat gear table...he gave up! 2nd tech found your terrific video and had it back together in about 4 minutes and working great. You are pool heros!!!
Wow thanks Greg, you just saved me $75 to have a tech come find out what's wrong. I took the gear assembly apart, reseated everything and my pop-ups work great!
I am having trouble removing the metal band on the top cover. The black handle on the screw unwinds but there is a nut at the base that ive loosened and yet the band will not pop loosen as it has in the past. Tried a couple taps to no avail. Please help with tricks to remove band without damage. TIA!
Good evening, i just took about an hour and replaced the low profile gear kit. I watched the video closely and didn't miss a thing. When I ran it, it became stuck in one position, which was what I was trying to fix in the first place. I looked in it while it ran with a high power light, the impeller was spinning, but the gears stayed stationary. Looking a previous comment about reseat the gear table I was wondering if perhaps I didn't push it down hard enough although I looked thru the hole while I did it and it seemed to seat........thoughts please
@@yabruf Yes both end gears spin and it's properly seated on the gear table. Have installed the new "ClockWork" 4 times, still gets stuck at one of the pop up locations, doesn't make any sense Everything is new................and Yes I have the unit seated correctly.
I've worked on pools all of my adult life and you sitting there with no water in that thing try doing it in a flower bed when it was done at a water level when the pool is full and that thing is full of water A&A needs to have their butt kicked for ever putting this on the market nothing but trouble with a capital T!
Thank you, I appreciate your video and explanation for how to do this properly. I'd disassembled mine, and couldn't figure out how to put it back in the housing considering the T-valves. Everything is back together and working great.
Thank you very much! Pool tech spent 2+ hours trying to re-seat gear table...he gave up! 2nd tech found your terrific video and had it back together in about 4 minutes and working great. You are pool heros!!!
Wow thanks Greg, you just saved me $75 to have a tech come find out what's wrong. I took the gear assembly apart, reseated everything and my pop-ups work great!
Very glad to hear.
googla stars! Thanks, I couldn't figure it out until I watched your video.
Very helpful TY.
Why do the rebuild kits come with a two part epoxy?
I am having trouble removing the metal band on the top cover. The black handle on the screw unwinds but there is a nut at the base that ive loosened and yet the band will not pop loosen as it has in the past. Tried a couple taps to no avail. Please help with tricks to remove band without damage. TIA!
How do you take out the Ts!!! I wish you showed that. I cant get them out
Great stuff thanks.
Good evening, i just took about an hour and replaced the low profile gear kit. I watched the video closely and didn't miss a thing. When I ran it, it became stuck in one position, which was what I was trying to fix in the first place. I looked in it while it ran with a high power light, the impeller was spinning, but the gears stayed stationary. Looking a previous comment about reseat the gear table I was wondering if perhaps I didn't push it down hard enough although I looked thru the hole while I did it and it seemed to seat........thoughts please
One of your gears my be stripped.
Could you spin both gears at the very ends of the assembly and turn the entire gear table?
@@yabruf Yes both end gears spin and it's properly seated on the gear table. Have installed the new "ClockWork" 4 times, still gets stuck at one of the pop up locations, doesn't make any sense Everything is new................and Yes I have the unit seated correctly.
The things on the bottom will not stay up/open so I can seat the gears... Any tips for me?
thanks very helpful.
Nice Job
I've worked on pools all of my adult life and you sitting there with no water in that thing try doing it in a flower bed when it was done at a water level when the pool is full and that thing is full of water A&A needs to have their butt kicked for ever putting this on the market nothing but trouble with a capital T!