THE CASE RETURNS, DEMO ARRIVES AND THE NEW MASSEY HAS SOME STUPID REDESIGNS
HTML-код
- Опубликовано: 30 сен 2024
- In this video our Case 895 returns with more than just a clutch!! The new Massey 7615 she some very weird new designs that make no sense, and the new Demo arrives
You can also follow us on
Instagram: / ifarmwefarm80
Facebook: / ifarm-wefarm-101507381...
Donations Paypal paypal.me/IFar...
We buy all our Tractor Parts from Contact John Conaty Tractor Parts
www.johnconaty...
Parts fitted to the Case
Clutch pack www.johnconaty...
Flywheel and ring gear
www.johnconaty...
PTO seal kit and bearings
www.johnconaty...
4 Wheel drive shaft bearing and carrier
www.johnconaty...
www.johnconaty...
3000L Diesel Tank built and supplied to us by TankFab.co.uk
They supply tanks to suit to suit everyone from 500L upwards
Check them out here
/ tank-fab-ltd-106238958...
A lovely video. The case still looks modern for a 30-year-old machine.
For the lift arms on the Massey if u want it to go up slow and accurate den use the wheel on the side of it
I seen ur massey 6470 in martins garage the other day Adrian and if u put the lift of the tractor in lower u can use the wheel beside it to lift up and down ur link arms
No worries with AdBlue on the Case 👍😂
Ah, the faithful Case returns, great to see her back. Nice update, with the full compliment and the addition of the quad trailer will get you back to max efficiency. As a gardener i know what you mean, enjoy the rain Adrian 🌧 🌱
For the lift arms use the wheel on the side Adrian
The buttons are more so for ploughing/powerharrowing etc, set your height and depth with the controls on the side pillar and you just press up or down them on the left arms
probabley an idea to buy a trailer big enough to put the quad in the back off if you need to take the quad somewhere
Yes I have no be already, my 10ft nuggent is there
You can use the wheel behind the 3 buttons for the lift arms to lift and drop them by turning that wheel
Tool box is poor alright when muck builds up on it need a Vise grips to open it.
I was used to the levers for the arms. That was perfect I thought.
That case is in some shape definitely been looked after, she's like me doesn't look anything like her real age👍
Thank you for sharing Adrian. Always enjoy your explanation of Ireland farm life. Hope your country is recovering well fro Covid-19. All the best. 👍🐄🐄🚜
U should have your spool valve lever in floating position Adrian maybe u do but it looks like u didn’t. Great video. Keep up the good work. 😀
Yes it normally is, probably too busy giving out about them link arms 😜
@@IFarmWeFarm happens to the best of us😀
Delighted to see the case back🤪
Do you not have skid pads on your mower
Hello i have been watching your videos for some time now and i must say they are as entertaining and educational as I have seen. Your some man for one man Adrian. Keep up the good work and hope you have a long and successful life in all you do.
Cheers Denis 👍
There should be a small wire that goes down to the battery for the dash check around the battery box it may have broken off .
I was passing through Monaghan the other day and everyone was doing hay, was it a similar story up in Monaghan
Nice one Adrian, great to see the case back, great wee tractor, no noise or vibrations in the Massey, i used to top fields on a 20 diesel, the teeth would be shaken in your head, good stuff!
The newer masseys have gone back to the rocker switch and the tool box is on top of the desiel tank
The old case what a beautiful old girl. Love it.. hope all is well and you and your family are keeping well and safe. All the best Martin from the 🇬🇧.
And yours Martin, thank you
Trying out the disc mower myself this year after hearing you raving on about it so much 😉 let the cows graze down the field first then cut it, let them back in an hour or two later and they cleaned it out fierce well, regrowth is fierce even and responded way faster than the topper
Father is concerned that there is nothing to cool down the bed of the mower when using it though as when cutting silage the bottom of the grass being wet is what cools it but you have none of that with the topping
Never had any issues with the bed heating up, it shouldn’t happen really. There’s no comparison in a topper and mower when it comes to a faster regrowth. 👍
Another thing if not fitted already soft ride on loader put it on mine new year much better ride with loader on with or without load lift rams get less of a hammering 😉
keep up the good vids ! You made my day
There is no way that tractor is 1991. Two good to be true
Hi there.
New SUB'r.
Your fuel pump...
Is the fuel tank in that box, or is it in the shed\somewhere else.?
If it's in the box itself, how big is it.? Cos it looks awful small to me.!
LOVE THE VIDS
KEEP'EM COMING
RICH(UK) 🥰🥰🥰.
The best time of the week
The ferguson 20 will be a handy tractor for the power washer 👍
Fergie 20 pto not strong enough to give sufficient pressure on power washers
@@MOOBOOSE why wouldn't it? I'd be very concerned about the engine in a tractor if it couldn't run a pressure washer at 540rpm
If shes not blue she'll not do plenty strong enough to run a washer at 540 👍🏽
Nice 👍 to see the case back Adrian keep them coming stay safe 👩🌾👩🌾👌👌🚜🚜🇬🇧🇬🇧🏴🏴
Fine looking wee case tractor best one I've seen in a long time
Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.
I've been waiting on this 😎⭐ that case is a nice wee tractor 🚜🚜
Yeah great video. Great to see the enthusiasm you have for the case. That tractor was brand new when I left Ireland. Those were the type lift arms on the case I was used to but without the adjustable length. I see all modern tractors have what the Massey lift arms are like. Looks way easier.
That trailer is handy for moving baby calfs from sheds
Adrian, we’ll worth the money. If you tried to buy a Telehandler, with the money you spent, you wouldn’t get much of a machine!
Did you replace the input shaft that had splines 1/2 worn where it connected with clutch?
Yes that’s the one 👍
Hi Adrian, thanks for all the great videos, can you send me the link for the new oil tank u got, thanks Peter Finnegan here from monaghan
Some of your implements are catagory 2 but you’re tractor is catagory 3 for example your fert spreader tips in when you let down a good hydraulic top link with check valve helps to solve that issue
Sunday is here and so is Adrian ✅ best day of the week 💚💚
Glad to see the Case back, it's an honest tractor, no laptop needed, been tededing with the older of the fleet of the next doors with an John Deere 2030 and Pheasant tedder compared with the ALOT YOUNGER brother John Deere!!! still love Massey's and my International's/ Case, because I grow up with them.👍
Super video, great to see case back,bought a 4210,biggest mistake I've ever made,near broke me,unlike int 674 which still is very reliable tractor.
Your not the first to say that, they were i little more troublesome in fairness. Them 674 were brilliant, drove one for years on a farm I worked on
Greetings from the Bronx, Adrian. Been following the channel since the Celt article showed up on my Facebook. Spent my childhood summers on my uncles small dairy farm not too far from you. Great stuff! Informative and entertaining. Keep em coming 👍🏻
Cheers lad 👍
The tool box is the same as the ones on the fendts and the lift inside is pretty awkward in the fendts aswell
The tyres on that massey look very well adrian.
A quad trailer is really handy for 🐑 sheep. Looks like a neat wee trailer.
Re the case dash. I'd a similar issue on my own 4230. There was a small brown wire that needs to be attached to the negative pole of the battery. Keep up the good work.
I will look for that this morning for sure, thanks for the tip mate 👍
The rocker is for pre set up and down work ie. Ploughing Harrowing using your new grass sower if you activate the down motion you can use the roller controller it's much safer and easier to control
Loved the vlog today looking forward to seeing the next one
Super quad trailer we have 1 super job 👍
Great video
Some massey sir
Grate video adrian our boys just love them.
I have a feeling the trailer could be staying for a lot longer you seem to like it all ready 👍👍
Ya I fear that myself 🙈🤣, we’ll c how it’s goes. Thanks Dean 👍
Hi adrian. Any chance of a school bag being added into the merchandise section.. great videos...
I’m looking into that this week, have had loads of requests for them so there definitely something I will speak to our embroidery company about for sure.
First
Second
Good stuffy as always. Good to see the case back. 👌
No lights on the trailer?
What was wrong with the dash
That’s some trailer
One question about that nugent quad trailer when your driving over bad ground has it hit off the box thats on your quad just that i see the way u have it??
It’s never happened, even with the last trailer which is more or less the same clearance wise. I wouldn’t worry about that at all
@@IFarmWeFarm just wondering 👍👍
Great to see the Case back, would you not use a hydraulic top link?
Not for mowing, we have a few for other machines but I like to set the mower with a top link
The Massey looks fantastic great purchase!!!
Just collected my Mf 390 2wd 3k hours amazing condition. Future classic
Did you ever consider a loader on the new massey
No not really, it would be very awkward around our tight yard
Hi Adrian check the multi plug under the dash on the bulk head for your dash problem thats were id start they give trouble
Adrian we have the 7614 I moved the tool box to the top of diesel tank. Should be 2 bolts holding the metal plate on just bolt it on through their. As for the lift arm buttons double press the up one and it works.
Had the joy of new Massey 7719 last week drawing bales never had so much comfort nicest tractor I ever drove a tip buy yourself a sparex hydraulic top link have one 10 years now never use old one again
Great video again guy's. Hardly use my toolbox on Massey ferguson too.😅🌟
Great to see the Case on duty for ya lad.....! Lovely wee trailer for sure Adrian and the side off option will be sooo friggin handy at the fencing and feeding ! Rain came wooo hooo!
Great vid Adrian.The Case looks spotless.Stick a straight pipe on her she,ll look d job👍
Preferences on a quad trailer
1) centre mount axle
2 ) big enough to put the quad in the trailer to take it for repairs or to another farm etc 👍🏻
The lift feature is for safety but if you hit the up/down button the second time it should stop the lift from movement instead of hitting neutral 😀
Can I ask 3 questions about the trailer if fully laden does it stand level , has it a stand of its own if you take the quad bike off ? Can you fit a 2nd quad onto it, take it down to a 2nd farm . 3rd question if fully laden your taking the quad off how easy is it weight wise ? Thanks 🙏
You must be the tidiest farmer on the whole island 👌 a credit to your craft
Love the look of the case fresh wee tractor, the Massey is a beast...looking forward to another vintage restoration vlog
In inside camera shots of the Massey are very nice Adrian and as you say on Instagram the big red bonnet 😎👍👍 great videos Lad keep them coming
We have a couple of 77 masseys and for the tool box idea we take them all out and leave them out because lost the one on our very first 77 so we have one in the cab 👍🏻
What type of mower is it you’ve got looking for a one like this and don’t know the name
Well wear with the Massey Adrian and the Case is looking very nice 👍
I’d say your glad to have the case back. Cracking video as always Adrian. Keep her lit.
You don't have to press the button for the link arms every time there should be a setting to change it
The little swiffler thing on the top link throw that away and get a hydraulic one it will make a big difference and it will be handier
would be good to see the dash repair on the case when you get the fella in to look at it
great content as normal
Great video Adrian as always. 🤗👍
I had a 5130 case and it was something to do with the alternator that the dash did work right
pleased to see the case back job well done massey looks nice blenty of power
Well done great video 👍 lovely handy tractor hope it goes well for you
He worst pain known to mankind - a lynch pin snapping closed on your finger 😳😳😳😳😳😳
Oh ya, I agree with that 👌👍
Great video Adrian the case looks great
The tankfab diesel tank is an impressive bit of kit.
Case back Adrian your flying now 👌
Flotation tires on her make seem easy to pull
Life is so much easier when you have the proper tools for the job. Comfy & quiet is so much easier at the end of the day 👍
GET A HYDROLIC TOP LINK. There soooooo much handyer than the normal one
I have 3 or 4 here, I much prefer a top link for mowing though
Adrian the demo trailer is very nice
John Conaty is fantastic. Earlier this year we had to replace some body work on our 4200 series massey, everything in stock and delivered the next day. Super job.
I went to secondary school in Kells with John Conaty in 1967.Whenever we meet we have a chat about old times..I bought plenty of bits and pieces from him over the years including a Case MX150..
Great video 👍 nice trailer 👍
Hydraulic top link
Great video Adrian tidy spot
How many cows do you have?
The tractor will get dirty topping
Very good 👍look forward to next one