I have a 2020 FLHT 107. After a ton of research I ended up with the Red Shift 468, fullsac MX header, S&S MK 45 slip ons, power vision and Arlen ness big sucker. 100 hp / 110 torque smooth curve no dips. It’s so much more fun to ride. I looked into the 475 but it definitely works better on 114 and bigger engines specially high compression. Sounds great, congratulations!
Thank you for watching! I was looking into the red shift cam also. Moonshine Harley Davidson did an awesome video on cams.... I narrowed it down to the s&s and the redshift... and the reason why I went with the S&S was the shop that I go to was having a sale on the 475 haha
Best bag for buck S&S 475 cam… and I would spend the extra money on the whole cam chest and a a good tuner . With those two things you can see a 20% gain in HP and torque…
Sweet ride! I recognize the road you were on, river road in edge water in route to Ft Lee(I thought you were making a right by interstate park at one point, or at least it used to be interstate park. :), old stomping grounds for me. I do love the sounds the 475 makes in idle. Enjoy the new power!
Thank you for watching.... Yes it was interstate park beautiful area. It feels like a totally different bike now. And yes I agree the 475 sounds awesome!
Nice review just did stage 2 on my ultra 107 HD torque cam S&S oil pump cam plate lifters. I found it really wants to be ridden now at 3k and up. Funny you said the same the meat of the powerband is now 3-4.5 k rpms
Thanks for watching. if I'm not on the highway going 70 80 usually around town I'm in a lower gear than usual because I keep the RPMs around 3,000. it's something to get used to for people that been riding Harleys all their life because the torque is down low but if you ride a sport bike it's almost the same because the power on the sport bike is higher in the rev range.
Good review. Ever since I put in my 475 cams.....I CAN’T HEAR JACK!!!...haha. Oh well but it sounds badass and garnishes the admiration or disgust of the people that hear it. Deuces ✌🏼
I have a 2022 SGS and looking to do a Cam. My stock SG is pretty peppy and don't want to lose that. I also don't want to blow my ears out all the time as well as my girls ears. I don't go away on long trips all the time but I will do some of them.... Is this cam going to be too much.... The only issue is that I drive aggressively... Maybe go with the 465c from S&S
@@M_J_Glide_22 With either cam you’ll get a lot more pep then stock. If you put on some 2 into 2 Khrome Works exhaust it has a nice deep rumble when you get on it and it isn’t annoyingly loud. And get it properly tuned with a power visions the Haley tuner is garbage. Stage 2 is the best bang for your money. Definitely won’t be disappointed Thanks for watching
Great review, I did the 475 cam in my 107 and you were right on with the power range. I put the Legend Revo A’s on the rear of the bike and it feels like an entirely new bike! I’m looking at the Legend Axeo for the front end
Thank you... I appreciate it. Before I decided to go with the 475 cam I watched alot of RUclips and read too many articles lol. Best bang for buck... I have been pushing off the suspension cuz adulting gets in the way... Priorities I guess haha Thanks again for watching!
Does your bike ever feel sluggish or wants to die when upshifting from a stop? My cammed street glide stalled twice at a red light when i was trying to accelerate
I don’t think it’s the cam you might have to get it tuned correctly… if you are using the SE tuner with a 475 cam. The tuner can’t handle that cam … I would go with power visions or thunder max tuner
@@HudsonMoto i bought the bike used from a harley dealership, previous owner had it cammed, im taking it back to the dealer so they can have a look at it, thanks
Hello. That's a nice bike. I have a question. My motorcycle is fltrx which was shipped in 22 years. I usually run from 1500 rpm to 3500 rpm. What kind of camera is right for me? 475? 465? Does 475 have a severe fever? I want to change the camera and feel the vibration and sound more shaky than the pure sound and vibration. Like an old bike. Is the 475c cam effective after 2500 rpm? Does the 465c cam have a good effect from 1500 rpm? Thank you for reading the question and please reply. Have a nice day.
Personally I would go with the s&s 475 cam. You increase your horsepower and your torque. Peak torque hits at 3500rpm. If you want your peak torque to come in a little lower then 3500rpm. I would get the Redshift 468 cam by zipper’s performance. You can not go wrong with either one. And to get the best results make sure you get it professionally tuned. Thanks for watching
@@HudsonMoto 22nd year road glide special on pv3 Is there a content of 475 cam? Or should I download it separately and transfer it to the pv3 and connect it to the bike and flash it?
I haven’t really don’t an actual test but with mixed driving I would get about 200 mile a whole tank… when I went to Tennessee last summer on the highway I got about 220. That’s cruising at 75 80
Thank you! I know it's my bike but I'm still in love with the color lol... And now since I installed the 475 cam it sounds like a Harley lol .... Thanks of watching !
@@Chase-Chase I usually go to the bikes and breakfast at The 9W market in palisade NY it's right over the board of NJ NY... It's the first Sunday of the month.
Thrashin supply MX 1in High Bed bars and thrashin supply 6in straight risers... Thanks for watching I also did a review on the handle bars check it out on my channel
@@HudsonMoto assuming u meant "don't have the baffles in"? Lol .. I took mine out. It's louder but more raspy. Not sure if I like it. Urs sound good in video
Earplugs? Cold? You have on a ton of gear man,no snow on the ground can't be that cold. Spend a few bucks get a 6 speaker Rockford fosgate sound system.
@@HudsonMoto Rockford fosgate sends a template to cut out your speaker lids so you wont need new ones. That amp they sale with the purchase fits in your fairing and can power up to 8 speakers. I went with 6 speakers myself. 6.5" Uppers, 6.5" lowers, and 6x9's in the bags. The lowers I bought OEM painted from hogworkz for $360. I could add 2 more 6x9's in the bags but I would need a special lid to house duals in each one. Dont need them anyways. You can hear me coming from about 5 blocks away or something stupid.
@@HudsonMoto I just put my bike in the shop. Going with 21" RC components savage eclispe wheel, matching left rotor, matching air cleaner, advanblack OEM Painted 21" wrap fender and chin spoiler, and a slayer derby cover.
@@HudsonMoto don't think I can upload a pic in the comment section on a youtube thread. Go check out Rc Components wheels. Really awesome line of eclipse wheels.
I love Harley Davidson bikes, I have owned 3 in my lifetime with my current one being a M8 107 Street Glide special. But here and now in 2023 HD bikes are overly complicated and outdated designs. Pushrods, primary chains, lifters, 3-hole oil fill, and drainage. The discontinued engine by Victory now owned by Polaris did away with all the parts that caused problems as did other bike manufacturers such as eliminating pushrods, eliminating primary chain, using full counterbalancing, full water cooling, smooth shifting manual transmission with no clunk sound, chain driven overhead cams. HD has just been trying to sell the outdated 1940s/1950s design forever until they came out with their Revolution Max format that will take over the entire line if HD is to move forward with a less labor intensive power plant.
All RUclipsrs have this one thing in common.....they lose me in the preamble. Too much chatter, instead of getting right into it after the intro. I'm not sure whether this to lengthen the time of the video. But I think it makes more sense to miss the audience with all the jibberish, and irrelevant commentary. I'm willing to BET that their listening audience will magically increase by very noticeable margins.
Can’t wait to start my Stage 2-Up builds. Good stuff bro 🤟🏽
Best upgrade for the money! You will enjoy it when you get it done! Thanks for watching
@@HudsonMoto absolutely! Looking forward to it
I have a 2020 FLHT 107. After a ton of research I ended up with the Red Shift 468, fullsac MX header, S&S MK 45 slip ons, power vision and Arlen ness big sucker. 100 hp / 110 torque smooth curve no dips. It’s so much more fun to ride. I looked into the 475 but it definitely works better on 114 and bigger engines specially high compression. Sounds great, congratulations!
Thank you for watching! I was looking into the red shift cam also. Moonshine Harley Davidson did an awesome video on cams.... I narrowed it down to the s&s and the redshift... and the reason why I went with the S&S was the shop that I go to was having a sale on the 475 haha
100/110? Left a lot on the table, definitely with the torque.
I enjoyed the video and congrats on the 475 choice! Love it in my bike too! Just liked and subscribed 🤘
Thanks man appreciate it! Same here! Awesome content!
@@HudsonMoto 🤙
I Have the stage 1 done now doing my research on what cam I want! for the stage 2
Best bag for buck S&S 475 cam… and I would spend the extra money on the whole cam chest and a a good tuner . With those two things you can see a 20% gain in HP and torque…
Sweet ride! I recognize the road you were on, river road in edge water in route to Ft Lee(I thought you were making a right by interstate park at one point, or at least it used to be interstate park. :), old stomping grounds for me. I do love the sounds the 475 makes in idle. Enjoy the new power!
Thank you for watching.... Yes it was interstate park beautiful area. It feels like a totally different bike now. And yes I agree the 475 sounds awesome!
Nice channel. Harleys and photography are a great fit.
Thank you! I appreciate it!
Nice review just did stage 2 on my ultra 107 HD torque cam S&S oil pump cam plate lifters. I found it really wants to be ridden now at 3k and up. Funny you said the same the meat of the powerband is now 3-4.5 k rpms
Thanks for watching. if I'm not on the highway going 70 80 usually around town I'm in a lower gear than usual because I keep the RPMs around 3,000. it's something to get used to for people that been riding Harleys all their life because the torque is down low but if you ride a sport bike it's almost the same because the power on the sport bike is higher in the rev range.
What GPS is that. Mine doesn't notify me of police ahead on my 202p rgs
The app is waze and I'm using Android auto. Thanks for watching
Good review. Ever since I put in my 475 cams.....I CAN’T HEAR JACK!!!...haha. Oh well but it sounds badass and garnishes the admiration or disgust of the people that hear it. Deuces ✌🏼
Yeah, definitely sounds bad ass! Thanks for watching
I have a 2022 SGS and looking to do a Cam. My stock SG is pretty peppy and don't want to lose that. I also don't want to blow my ears out all the time as well as my girls ears. I don't go away on long trips all the time but I will do some of them.... Is this cam going to be too much.... The only issue is that I drive aggressively... Maybe go with the 465c from S&S
@@M_J_Glide_22 With either cam you’ll get a lot more pep then stock. If you put on some 2 into 2 Khrome Works exhaust it has a nice deep rumble when you get on it and it isn’t annoyingly loud. And get it properly tuned with a power visions the Haley tuner is garbage. Stage 2 is the best bang for your money. Definitely won’t be disappointed
Thanks for watching
The exact video I needed to see!!! thank you!!
You’re welcome! Thanks for watching
sweet bar set up. That's exactly the set up I have on my 19 Road Glide. I just ordered the 475 cam and have a bassani road rage 3 stainless coming.
Thank you! The bar setup is great I feel like I have more control. And when you add the 475 the engine will come alive! Enjoy! Thanks for watching!
Great review, I did the 475 cam in my 107 and you were right on with the power range. I put the Legend Revo A’s on the rear of the bike and it feels like an entirely new bike! I’m looking at the Legend Axeo for the front end
Thank you... I appreciate it. Before I decided to go with the 475 cam I watched alot of RUclips and read too many articles lol. Best bang for buck... I have been pushing off the suspension cuz adulting gets in the way... Priorities I guess haha Thanks again for watching!
I did the same with the rear but holding off on the front til I do my fat tire kit.
nice chem trail right above that bridge.. guess yall have them too! I went with legend and wish I did ohlins
Thanks for watching! So many suspensions to choose from I can't decide
Chem trails all over NZ aswell, funny the things we see while just doing homework on motorcycle upgrades hehe
What kind of pipes did you put on that 114 I like the 475C Cam but I'd like to know what kind of pipes you had thank you
Bassani road rage 2 into 1 full system thanks for watching.
Does your bike ever feel sluggish or wants to die when upshifting from a stop? My cammed street glide stalled twice at a red light when i was trying to accelerate
I don’t think it’s the cam you might have to get it tuned correctly… if you are using the SE tuner with a 475 cam. The tuner can’t handle that cam … I would go with power visions or thunder max tuner
@@HudsonMoto i bought the bike used from a harley dealership, previous owner had it cammed, im taking it back to the dealer so they can have a look at it, thanks
@@HudsonMoto you were right, harley techs said problem was the tuner, im going to try one of those tunes, thanks
Awesome! You will definitely feel the difference once it’s tuned correctly!
3000 is nothing, rev that girl out!!! Cam sounds amazing.
Haha will do! Thanks for watching
Hello. That's a nice bike. I have a question. My motorcycle is fltrx which was shipped in 22 years. I usually run from 1500 rpm to 3500 rpm. What kind of camera is right for me? 475? 465?
Does 475 have a severe fever? I want to change the camera and feel the vibration and sound more shaky than the pure sound and vibration. Like an old bike. Is the 475c cam effective after 2500 rpm? Does the 465c cam have a good effect from 1500 rpm?
Thank you for reading the question and please reply. Have a nice day.
Personally I would go with the s&s 475 cam. You increase your horsepower and your torque. Peak torque hits at 3500rpm.
If you want your peak torque to come in a little lower then 3500rpm. I would get the Redshift 468 cam by zipper’s performance.
You can not go wrong with either one. And to get the best results make sure you get it professionally tuned.
Thanks for watching
@@HudsonMoto Thank you for a good idea. I wish you more video and development.I'm rooting for you from South Korea.
Thank you 🙏🏼. I appreciate you.
@@HudsonMoto 22nd year road glide special on pv3 Is there a content of 475 cam? Or should I download it separately and transfer it to the pv3 and connect it to the bike and flash it?
@@HudsonMoto Is there a menu of 475 cam of my bike in pv4?
Thanks mate , good video !!
Thank you!
What bars are they . I need them !
Thrashin supply MX style 1in high bend bars.
What’s the difference in your gas mileage now that you have the S&S 475 cam?
I haven’t really don’t an actual test but with mixed driving I would get about 200 mile a whole tank… when I went to Tennessee last summer on the highway I got about 220. That’s cruising at 75 80
I phukn love road gides. Nice ride man
Thank you! I appreciate it!
Thanks!
Looks good, sounds great!
Thank you! I know it's my bike but I'm still in love with the color lol... And now since I installed the 475 cam it sounds like a Harley lol .... Thanks of watching !
What kind of hand guards are those?
Memphis shades. Thanks for watching!
@@HudsonMoto I’m in Bergen County, any bike nights or meets around?
@@Chase-Chase I usually go to the bikes and breakfast at The 9W market in palisade NY it's right over the board of NJ NY... It's the first Sunday of the month.
What mufflers are on your bike?
Bassani road rage 2 into 1
Awesome, love it. What bar set up is that you have?
Thrashin supply bars and risers with Arlen Ness grips... Thanks for watching
Nice What size bars are those
Thrashin supply MX 1in High Bed bars and thrashin supply 6in straight risers... Thanks for watching I also did a review on the handle bars check it out on my channel
Very nice!
Thank you for watching!
Hi what tuner u used?
Power vision
@@HudsonMoto dynoed or auto tune?
My bike is dynoed by Get Lowered cycle and it’s a custom map
Did you change or keep your stock head pipes?
I got a Black Road Rage 2into1 System w/4" Straight Muffler. No I did not keep my stock head pipe
What do think about that windshield? Is it good on the highway?
I'm a shorter rider so it works for me It's a 6.5 in lip... I'm 5'7"
@@HudsonMoto Ahhh ok thanks, I am 5’11” so I might need a taller one.
Color of your bike is amazing 👍👍👍
@@vicmanjwYou're welcome thank you for watching! I appreciate the sub also!
Waze said watch out for the POPO lmao!!!! wow that is much much louder and faster.
Waze got my back lol.. and Yes the bike is alot louder.... My radio is useless with a full face helmet and ear plugs lol...
I use Waze all the time.
Lmao 😂 gotta put a set of speakers in the helmet
Beautiful bike, bro. What seat are you running ?
Lucky Dave’s
@@HudsonMoto it doesn’t look like a whole lot of padding but the built in backrest makes up for it. Do you still like it ?
Do u have the baffles in the pipe? ..enjoying ur videos 👍
No I do have the baffles in... The audio doesn't do it any justice! In person it sounds so good! Thanks for watching!
@@HudsonMoto assuming u meant "don't have the baffles in"? Lol .. I took mine out. It's louder but more raspy. Not sure if I like it. Urs sound good in video
The s&s475 is #1 for a reason...
Best decision I have made for my bike! Thanks for watching
Big thumbs up that is a nice nice ride take care catch you later brother
Thank you sir!
Earplugs? Cold?
You have on a ton of gear man,no snow on the ground can't be that cold. Spend a few bucks get a 6 speaker Rockford fosgate sound system.
Yes, that is my next investment for the bike the sound system sucks on my bike. Thanks for watching 👍🏼
@@HudsonMoto Rockford fosgate sends a template to cut out your speaker lids so you wont need new ones. That amp they sale with the purchase fits in your fairing and can power up to 8 speakers. I went with 6 speakers myself. 6.5" Uppers, 6.5" lowers, and 6x9's in the bags. The lowers I bought OEM painted from hogworkz for $360. I could add 2 more 6x9's in the bags but I would need a special lid to house duals in each one. Dont need them anyways. You can hear me coming from about 5 blocks away or something stupid.
@@HudsonMoto
I just put my bike in the shop. Going with 21" RC components savage eclispe wheel, matching left rotor, matching air cleaner, advanblack OEM Painted 21" wrap fender and chin spoiler, and a slayer derby cover.
@@mikepsly73 That’s awesome… That’s going to look good. Let know when it’s done I wanna see pics
@@HudsonMoto don't think I can upload a pic in the comment section on a youtube thread.
Go check out Rc Components wheels.
Really awesome line of eclipse wheels.
I love Harley Davidson bikes, I have owned 3 in my lifetime with my current one being a M8 107 Street Glide special. But here and now in 2023 HD bikes are overly complicated and outdated designs. Pushrods, primary chains, lifters, 3-hole oil fill, and drainage. The discontinued engine by Victory now owned by Polaris did away with all the parts that caused problems as did other bike manufacturers such as eliminating pushrods, eliminating primary chain, using full counterbalancing, full water cooling, smooth shifting manual transmission with no clunk sound, chain driven overhead cams.
HD has just been trying to sell the outdated 1940s/1950s design forever until they came out with their Revolution Max format that will take over the entire line if HD is to move forward with a less labor intensive power plant.
All RUclipsrs have this one thing in common.....they lose me in the preamble. Too much chatter, instead of getting right into it after the intro. I'm not sure whether this to lengthen the time of the video. But I think it makes more sense to miss the audience with all the jibberish, and irrelevant commentary. I'm willing to BET that their listening audience will magically increase by very noticeable margins.
Thank you for the feedback. I appreciate it.
Harley riding tip. Don’t ride your bike less than 3k. Even in a parking lot, a twin cylinder motor lives and dies @ 3k rpms
Thanks for the advice! Thank you for watching....
@@HudsonMoto also you bike sounds great. You’ll be putting a big bore in it before long. Power makes these bikes so much more enjoyable while riding.
That's the goal... Haha
No, this is wrong
Too bad it sounds like a lawn mower
Yup and it pulls like a tractor! Thanks for watching!
The person that wrote that more than likely has a sewing machine
lol 😂