I TOOK MY STAGE 2 HARLEY DAVIDSON ROAD GLIDE TO THE TRACK FOR THE FIRST TIME! *1/4 MILE DRAG RACING*
HTML-код
- Опубликовано: 13 сен 2024
- I took my 2019 Harley Davidson Road Glide Special to the track for the first time! How fast did I go? Watch the video and find out! Make sure you browse the channel and subscribe! As always, thanks for watching!
Follow me on Instagram @dooworkmotorsports!
![Baby Kia - GLOVES & DRACS (BLACK AF1s) [Official Music Video]](http://i.ytimg.com/vi/ajm8LeB0qQk/mqdefault.jpg)
First time the channel great stuff and nice video. Not sure I’m going to be a race track guy but that was like a lot of fun I’m currently trying to decide if I’m gonna put a stage two on my 21 RGL. Ride safe
12.01 @ 114 is an excellent pass for a 114 !
I would be happy too !!!
Your bike is bad ass!!! I did a stage 2 on my 2019 SGS over the winter and was amazed at the defense!! Keep up the great videos.
Thanks for the support!
I 'm impressed. You're gonna surprise a lot of bikers out there. The bags will throw them off.
Commands respect for just doing it. Well done!! I have a stage 2 on a 103. Can only imagine it on a 114.
Good job!! Nice hog..
Times were pretty darn good and you did an outstanding job "piloting and shifting".
Thank You!
@@DOOWORKPRODUCTIONS Looks like maybe you installed the Flo running boards but I'm unable to make out your rear brake but it doesn't look stock or like the Flo style; can you share some details pertaining to both floorboards and rear brake pedal? Thanks
@@craigjarboe2834 Floor Boards are from FLO motorsports, and the brake pedal is from Jokers.
@DOOWORK PRODUCTIONS What cam were you using at that time? I have a Woods 22xe in my 2019 Street glide special. I believe Moonshine was able to get 150 before Harley released the new 68 mm throttle body.
Not bad for an 850lb scoot ! My 2008 V Rod stage 2 bested a consistent 11.30 @ 120 with my 220lb ass aboard. I don’t own it anymore but have myself a 2019 RG 107 stage 2 She’s my baby tho and I don’t run it hard at all. Just have a few mods aimed at reliability .
I put a128 in my '17 Limited with a Woods 22X. Now getting 141HP and 151T. Had her up to 146MPH with throttle left but lost my nerve. I'm not young and stupid anymore.
To go from a dead throttle to on it, that wasn’t a bad time at all. It’s amazing what just a cam can do in these M8’s.
Great video man, well done taking that beast of a bagger out there! Very nice bike, smart content, keep it coming! 👍
Dude that's awesome man. Ya that was a good run man. Good job. That things a beast. About to get my stage 2 as well. In the Harley shop today as we speak.
Great video. Gotta be an awesome adrenaline rush! Times are good for what's been done.
That’s really cool
Sweeet!! 12.01 is Friggen sick for a big ole gurl.
I have watched you race other bikes on the streets, I guessed you would be 12 seconds, based on all you the work you did putting a excellent stage 2 in it , nice work ! you did your homework for sure, soon as my factory warranty is up thats the cam I'm throwing on!
I got a 107 with same cam chest kit. It does rock. I'm gonna enjoy this for now until something breaks or I get beat by someone. Keep shiny side up!!
Very good results, I have a 2017 Streetglide CVO and am just ready to turn it on with a stage 2 this video solidified my thoughts.
Once you go 128 you'll never regret it. You seem a light weighted so with a 128 the power to weight ratio will be at your advantage.
Great run and beautiful bike, I was raised in Lapeer, so nice to see someone from my home town on here
12.0 is an amazing time!!! Bad ass bike, Bro! 👍
Great video! I appreciate the content. I also did a stage 2 on my 2020 Road glide, useing the Red Shift 468 cam kit. I was wondering what it would do in the quarter mile. T
hank for answering my questions.
Dang, that thing is moving! Great job!
Very cool
Video and awesome build!
Awesome run! I have a 2020 Street Glide and it's in the shop right now, getting a D&D Billet Cat 2 into 1 exhaust, pro vision tuner, Woods 22x Cam, high flow air cleaner, and gonna dyno tune it. Can't wait to get it back by the weekend! Your video has got me pumped! Nice bike
I have the same setup , it is the best I was HD dealer for years had a lot of very fast bikes over the years this bike is by far the best bang for the amount spent . After this the amount of money spent versa the extra speed it is not worth it stay with what you have . Trust me on this one.
Regardless of time, that was awesome. It's such an adrenaline rush doing that.
Those are some numbers to be proud of bro.
That's a beautiful bike and it shits & gits it.
Good video man.
peace
Thank You!
You run a fueling vented dipstick or the trask breather at all? Im doing a similar build and not sure what one to go with.
I run the A1 cycles one..
That's a great time! Good job!
Take your bike to Moonshine HD in Franklin, TN...
Well done!!! She RIPS!!
You may be able to 'quick shift' without the clutch if you are able to apply some pre-load to the shifter..? Easier said than done but maybe worth trying..?
Bro with a couple adjustments and you on the back I can guarantee to get a better time with it.
Took a while but you finally got there
Thanks, good info!!!! Safest of Travels my Brother
Your build sounds great. I’m trying to decide between the S&S 465C and 475C cams for stage 2.
I love the sound and performance from my 475C!
@@DOOWORKPRODUCTIONS Me too I did the same
I have a 2019 RG with the S&S 465c No complaints whatsoever. Great cam and easy on valve train.
@@richporak Thanks, I’m more concerned about reliability than HP, so I’ll go with the 465C. Many people say that you need to change the valve springs if you use the 475C. If I want a reliable bike with 200hp, then I’ll buy a VMax.
Really nice bike and you did well at the track.
Impressive
Much respect. Good job.
Will say I am impressed AND surprised!!
I'm putting the same S&S 475 cam in my 2022 114 Fat Bob next month. Also gonna be dyno tuned using a Power vision 3.
Should run pretty well with my 157 lb ass on it!
I put the multi plate recluse clutch in mine , use a little clutch as you leave make another half second come off your time slip
I know that track I'm going to be taking mine up there in October and do a couple of passes on my bike after seeing yours I'm probly going to be 11s I'm guessing
6:17 ... at last!!! Someone who puts the camera where we can all appreciate a much better view.
Very cool-I would never have thought a Harley could do a 12 sec. 1/4 mi but I learned a bit. You were getting a lot of looks from everyone near you when you were setting up and getting into position.
I love my Harley, but if I want to go fast I take my Yamaha, but between the two? I prefer to go cool. And what’s cooler then a Fatboy Lo in Denim Black w/ nickel finish 103 ci? On my score card- Nothin! But Dude, I must say that’s one sweet Road Glide! Rock On!
Yamaha don’t make anything fast … low 9s busa tho
I'm wandering if maybe. U would've smoked the tires would it have spun at 2500rpm.. beautiful bike..sounds great...
Awesome video. I'm pretty sure I'll be satisfied only with stage 2
Awesome video, yeah I wonder with a drag slick on the back how much faster you would have been?? Speed is addicting, lol . But you know how that goes!!
I think you could have gotten into the 11’s.
I’ve got an 18 sg with the Harley 114 stage 4, zippers 472 cam, d&d billet 🐈 that was dyno tuned with powervision. It made 125/131 but haven’t got it on a track to see what it can do. Currently in the shop waiting on a new trans because mine exploded 😭
nice video i hace a 2017 streetglide .i did a fueling 472 cam made a good difference in the bike with just a cam.then i installed a s&s 124 kit picked up another 20hp and torque you wont regret it if you ever decide to do a 128 i have not been outrun yet i have raced alot of harleys to.i have put about 5000 mi on the bike since i built it no problems i did upgrade oil pump and vented my dipstick
Pretty impressive for what you have done to it. Did some racing back in the day with a 427 chevelle, ran 11.40s with it. Didn’t think your bike would go low 12s. Have a 2019 107 rg stage-1. Have that same cam chest kit ordered for it, but it has been back ordered since March. Looking foreword to installing it when I get it. Again, nice job with your bike...keep the good videos comin!
Thank You!!
That was dope!!
Don't take your fingers all the way off the clutch lever in between shifts. It's like when you are shooting a competition. Your finger never leaves the the trigger, from shot to shot.... Looks like a fun day!
Wondered if you checked into the Aluminum 55mm intake manifold yet, I think it's a better piece
Nice job, Bro! I did the same cam, oil pump...etc on my 2019 Fatboy 114. Want that hawg to shoot out from underneath you? Do what I did....get a Horsepower Inc throttle body and intake. Get their air cleaner and external breathers as well. Take it to a reputable dyno-tuner and you'll be shocked at its performance.
how much did those upgrades cost you?
Nice job on a bagger! I'd be super happy with those times as well! Great vid!
Man...thats a GREAT time and killer launch for first time for sure!!! Racing at a strip is A LOT different than the street!!
Sweet road glide!!
A beautiful machine and very impressive how that bike stayed up with that rocket . A cruiser against a spot bike ya to different classes and it stayed close to the rocket 🚀.
This is awesome!
Love the bike!!! I just bought a black on black ultra! What products do you use for washing and polishing?
Only the best! Adams Polishes!
Great Bike!... one thing for sure, I'd rather ride you bike around town and on a 1000 mi. road trip than any crotch rocket or sport bike.
You’re getting everything out of that 114” Well Tuned!
Doo wut U Doo bro! 12 second 1/4 ain't bad at all for a stage 2 RG 114ci my man! Has alot to do with the rider as you well know.
Great job! Good to see what these things are capable of
I got an ‘18 with 124 sleeper.
What’s you think could be possible?
Great running bike...proof that FM knows how to get the most out of the displacement!
Most out of displacement? I never dragged a day in my life and on my 6000 dollar GSXR 600 I ran an 11.3 at 125?
@@Kashmirknight you get your HP from RPM, Harleys get their HP from torque! And I didn’t even mention weight. I bet you don’t even understand what I’m saying! Take a physics class and then google the HP equation and then maybe you will understand! You’re trying to boast but your comment makes you look stupid to a true gearhead!
You took my comment out of context, and compared apples to oranges.
Beautiful bike! I have a 2018 Vivid black Road King with Milwaukee 107. Not quite as fast as yours though! LOL
Black bikes matter! I have a 2019 RGS with the 475C cam setup and live in the Holly area. Would love to meet up sometime, great videos!
Great pass! Surprised you didn’t pull it up. If you hooked up that would be your next issue well fun issue. What type of seat is that?? Bike is amazing!!
I don't think it came up because I only weigh 160lbs.. I have a Lucky Dave's Seat. Thank You!
I should come on up there and see what my big ass Ultra will do
Nice run! Did you lower tire pressure, a couple of lbs?
I did not.
This. If you're spinning, your tire pressure is probably too high. A stickier compound would also help.
You may need to get a Trask clutch basket.
Yeah decent did a good job
I need to get my 131 RGS down there and see what it’ll do.
Bad ass video and runs! Where did you get your helmet?
Thank You! I actually got it online a few months ago, but this design was a limited run, so they are no longer available.
good run gonna take my 128 soon
Awesome launch and shifting.
Nice bike what seat is that.and where did you get the emblem for the gas tank
This is a Lucky Dave's Step Up Seat, and the emblem on the tank is from Brian at Choice Cycle!
Pretty cool. I have a 2019 HDSGS 114. I installed a RS468. I was curious to see how you did. Awesome.
Nice job for the first time at the track, very respectful et. You’re a good street racer though!
Sweet bike man!
Nice Engine Braking at the end of the strip - but how fast ?? 12.0 @ 114 - Cool
I see ya changed the engine guard. Now you should get the fang fairing to go with it. I was thinking that when ya had the old one. But now , man get the fang !!
Love the Black 👍😎🇱🇷
Your height please?
I have the fuel moto 2-1-2 head pipe and Rinehart slip ons. Stage one. On my 2020 ultra limited
For a stage 2 maybe you could have done a little better but not by much. You did great.
Is that #1 on your tank painted or a decal? Looks sweet!
Decal! Thanks!
@@DOOWORKPRODUCTIONS where can I get a set??? and do you have multiple colors??
Also what bike lift are you using? Is that something from harbor freight?
sweetest bike bro! how high are the apes? 12, 14?
😮😮😮😮😮😮😮😮
What size bars do you have? And brand?
12" FXR Division Motorwitch Bars..
What exhaust are you running? It sounds great!
Nevermind, I guess I should've waited till the end of the video. Lol
Awesome!!! Nice launch. Next time you go to the track only use the clutch to leave. When you shirt left on the throttle hand shift and back to 100% throttle. Popping you clutch in every gear is harder on the bike and a little slower.
A few more passes and you should better your time a bit.
Sweet ride, sounds strong.
For reference my 2011 Road King 96 inch stage 1 setup with stock windshield on and bags full of crap like clothes and rain gear I ran it twice at Martin launched at 2500 hit redline every gear 13.001 @101 and then the 2nd pass I short shifted it with a time of 13.002 @ 100
Good fun, Ride Safe!
Would love to race you to see how are bikes match up. Have a ‘20 Fxbb with a ss475
What setup? Is it the factory stage 2?
Is your mean mug painted vivid black? Where did you get it?
Would have been quicker but you spun cause you werent in the groove.next time line up in the cars groove .track is slippery out of the groove
To much clutch. The hydraulic clutch only needs 1/4-1/2” pull to shift with no lift on the throttle. You can shift these like an automatic. Great job👍
Thanks for this I had no idea.