I have the same exhaust and I'm having clearance issues after it passes over the axle and over the PHB relocation kit. It still doesn't have enough clearance and I've adjusted it about 5 times. It rattles like crazy off the PHB relocation bar.
Just recently purchased a 02 firebird trans am and I’m trying to upgrade my exhaust. Can I get the specs on yours. Also I’m from Mississippi as well and I travel to the Jackson area a lot. Hopefully we can connect and you could help me get my fbody right
Yes I do. Prolly gonna run it like a corvette with quad tips instead of the factory cme tips. I’ll have to try it out. If I don’t like it, I’ll change it back
Inside ain’t bad I drive a truck with no cats and down turns before the axle its only bad when you idling and just sitting there and the wind blows it but when your drivin you won’t notice it just everyone else
I did at first but yeah they’re trash. Definitely upgrade them. I got the clamps from O’reillys bc they are ten times better. They have two bolts on them and help seal exhaust leaks a lot better
I'll ask Incase anyone knows, does the differing exhaust lengths matter when it comes to power? I would think that each side of the headers would need an equal length of exhaust piping to run efficiently. Or I could be wrong and the extra exhaust piping on the left side doesn't impact anything if anyone knows the answer that would be cool.
@@_wenjo this is what the x pipe is for. The x pipe helps to balance flow between the two pipes. H pipe can serve a similar purpose as well but it provides a different sound than an x. You can also have a double x pipe
@@clutchergarage oh Yeahh looks like it would may do that eventually later on just looking get true true dual x pipe set up curently have excel rock header stock cat back setup with btr stage4 cam defently needs a good exhaust set up needs gears with this cam
That exhaust sounds freaking awesome! Some people commented that it's not loud? Love the low deep tone personally.
Damn man that exhaust looks great and your car sounds awesome
Damn my fbody looks like it’s been through the ocean underneath and his is just mint
Perks of living in the south man lol
It has the CME valance, I would love to see the exhaust with CME tips on. Sounds perfect!
It’s in the works!
@@clutchergarageever got the cme set up with this exhaust?
What cam are you running. Im currently looking.
Sounds awesome
What cam was in it at the time this vid was shot?
Is that a cammed ls1???😮
Sik as car men badass sound to it as well what cam are u running if u dnt mind me asking
I have the same exhaust and I'm having clearance issues after it passes over the axle and over the PHB relocation kit. It still doesn't have enough clearance and I've adjusted it about 5 times. It rattles like crazy off the PHB relocation bar.
The bar that comes with it kinda sucks for clearance. The umi brand relocation bars works better
What exhaust is this?
Love the sound!! I have a 2000 Z28 . What tail lights are those?
They are custom made. I’m thinking about trading them for some oems that are in good condition
Damn that sounds sweet, Does it sit real low? I'm thinking of getting this exhaust.My car isn't lowered.
Yes it’s low but my car is also lowered so I imagine it’ll do even better on yours.
@@clutchergarage Thanks for the info
Can u build me a set of pipes like that, I have 99 fire bird trans am I'm trying to do like that.
Speed engineering true duals is the same setup
Just recently purchased a 02 firebird trans am and I’m trying to upgrade my exhaust. Can I get the specs on yours. Also I’m from Mississippi as well and I travel to the Jackson area a lot. Hopefully we can connect and you could help me get my fbody right
Great set up but i think those bullet mufflers are taking away from the sound . it doesn't sound very loud at all
That's funny because i was thinking the same thing. Why isn't it loud? 🤔
I promise you man it’s loud. Video doesn’t do justice
What’s all done to the motor is there a cam in it as well besides a exhaust
What cam?
Did you take the heat shield off above the axle I can’t see in the video looks like you have the gas tank one still
Do you have to pull the heat shield off?
Where is your shop located
What sway bar and trac bar kit do you have
Cool vid. I’m in Tupelo, MS
Cool deal man! Hattiesburg
@@clutchergarage I’m up the highway from you, nice sounding car! Is it loud enough to have problems with the law?
@@badas95Z I haven’t had any issues so far. It’s loud but nothing terrible
@@clutchergarage is yours a auto or manual?
Which Panhard bar relocation are you using
Speed engineering
Sounds killer. Much better than the y pipe setup. Do you plan to run a cme?
Yes I do. Prolly gonna run it like a corvette with quad tips instead of the factory cme tips. I’ll have to try it out. If I don’t like it, I’ll change it back
Check out Google ls1tech couple people have done it before. I'd recommend the 3inch cme I have if you can find them
Where’d you get your taillights from??
Is this speed engineering true duals? How much is your car lowered and how much ground clearance do you have?
1 1/2 inches and honestly maybe 5 inches. It isn’t much at all. I’m going to try and tuck it up higher but I haven’t had time here lately
@@clutchergarage thanks for responding. Would you recommend it?
Does someone know if this exhaust differs in tone compared with the tsp true duals out the back?
Did you mod your tail lights?
🔥
Nice you also have the infinity tailights. I made some for my Trans am
Sounds freakn awesome. Its a camero . Dont be a wanna be. With a corvette exhaust 😊
Hello! Question….debating on getting true duals, but how bad is the exhaust smell inside the car w/o cats?
Inside ain’t bad I drive a truck with no cats and down turns before the axle its only bad when you idling and just sitting there and the wind blows it but when your drivin you won’t notice it just everyone else
Appreciate it
did you use the stock clamps it came with? i read they were not that good and if you changed clamps which ones did you go with?
I did at first but yeah they’re trash. Definitely upgrade them. I got the clamps from O’reillys bc they are ten times better. They have two bolts on them and help seal exhaust leaks a lot better
@@clutchergarage thanks for the info
@@clutchergarage Have A Link To Those Clamps ?
Where did you get that exhaust Kit?..Did you make it yourself!?
www.speed-engineering.com/shop-by-vehicle/1998-02-camaro-firebird/exhaust/true-dual-exhaust-kits/ls1-camaro-firebird-true-dual-exhaust-rear-exit.html
Headers ?
I noticed non-OEM rear springs. Is the car lowered? If so, how much?
Inch an a quarter
What motor /cam 😳
What exhaust kit was this? Texas speed?
Link in description
How exactly did you mount that hanger by the drive shaft cause I'm missing that part from my kit???
Or was that custom?
It comes with the kit. You have to go inside the car and pull up the seat and undo the seatbelt lock and use the bolt and hanger provided
@@clutchergarage thanks for responding, guess I'm giving TSP a call
@@angel1320. this is the speed engineering kit so it may be a tad different. I’d call customer service and ask about it.
Work torque arm is that you are using?
Umi
I'll ask Incase anyone knows, does the differing exhaust lengths matter when it comes to power? I would think that each side of the headers would need an equal length of exhaust piping to run efficiently. Or I could be wrong and the extra exhaust piping on the left side doesn't impact anything if anyone knows the answer that would be cool.
Nah man. If it makes a difference at all, it isn’t enough to even notice a slight difference in power. But good question
@@clutchergarage thanks man, That was the one thing I was never able to get an answer on.
@@_wenjo no problem at all
@@_wenjo this is what the x pipe is for. The x pipe helps to balance flow between the two pipes. H pipe can serve a similar purpose as well but it provides a different sound than an x. You can also have a double x pipe
Tail lights? Where can I get them?
Smokey Customs built mine! He’s on instagram!
Isn't he rear bumper aftermarket?
Nah it’s factory only on slp models
Whats size are the headers 1¾ or ⅞
I bet if you replace those bullet mufflers with just a three inch pipe your car would be alot louder 👌
I honestly about being loud. Just wanted a clean tone. I’m more than likely going to change from this setup. It scrapes on everything
@@clutchergarage can I run this same setup on an 83 third gen Camaro ?
@@howardthedon9310 No
Can. You put cutouts on the x pipe ?
Prolly could. Really need a good exhaust guy. More than likely would be a pain in the tail. Lol
@@clutchergarage oh Yeahh looks like it would may do that eventually later on just looking get true true dual x pipe set up curently have excel rock header stock cat back setup with btr stage4 cam defently needs a good exhaust set up needs gears with this cam