Cut an Object Larger than your Laser Bed Lightburn Easy setup 😲 Oversized Projects 😲 Pass Through

#Laser
#Thunder
#Nova35
This is an easy way using lightburn to cut projects that are larger than your laser bed, very easy set up how to cut oversized Objects, Mainly you need refecrence points for the laser to work with all is shown in the video.

[@Kennylolwins]

Brother, everytime I am in a need of something not so trivial in lightburn, you come and deliver! I wish you the best!

[@carphotography]

Thank you and thanks for watching :D

[@karenleyland9071]

Thanks so much for the easy to follow step by step video. I have been so confused with others. I just cut my first oversized 600mm circle. Thanks Legend.

[@carphotography]

Awesome glad it could help :D

[@gilbertboyer9936]

When you're good, you're good. Thank you for lesson. Well done.

[@lynncosta9346]

Terrific! Just what I needed...

[@ClintonCaraway-CNC]

Another great video!! I would have never thought of this!!

[@carphotography]

Thank you, yes it is a pretty simple way to do it, i also worked out how to send engravings larger than the bed size so that will maybe be my next video. thanks for watching.

[@ohiogrudgeracing]

Great info, thanks for sharing!!!

[@carphotography]

Thank you

[@patrickhall7884]

Nice one!

[@carphotography]

thank yoiu

[@jeffmoyer1]

Thanks for making a nice, short video

[@carphotography]

Thanks for watching :D

[@EasyMoneyWithApril]

Thank you for this video, i needed to cut a 24" circle and my bed size is 20x28, this helped me so much and i actually understood the process because you were to the point and clear about the process. I had just one end come up a little short but i sanded it and you can't even tell. My red dot was off a tad so i know what i did wrong.

[@carphotography]

awesome, not sure what laser you have but mine i slow the speed right down so i can accurately place it. glad it helped out, thanks for watching.

[@EasyMoneyWithApril]

@@carphotography oh I totally forgot about slowing it down. I have a 60w OMtech. I’ll definitely try that on my next big project. I’ve shared your video in my laser group and several people find your video very helpful. Thanks again.

[@carphotography]

@@EasyMoneyWithApril awesome thank you very much.

[@tizianaberjaoui3274]

Great video, just was not clear on after you make the nodes, how do you get the circle to cut in half, i have tried what was suggested, but the circle does not break.

[@carphotography]

you have to hover over the node you want to break and press the letter B on the keyboard :D

[@eludinafaradneh8256]

Great video
But does this work with rdworks v8 programe

[@carphotography]

if it has a print and cut feature i cant see why not but i haven't tried it thank you

[@raymondrivera8815]

I been trying to do this with a logo and image and for some reason i can't get it to work. When i make plain circle yes but with a design or a logo in the middle i can't do it the Edit notes doesn't work only on a plain circle. I can i get to work with a design in the center and then flip it and continue the design? Thanks

[@carphotography]

it is possible with any shape, in this video here i show how you can cut and etch :D ruclips.net/video/QFNMQqFzhfE/видео.html&t

[@raymondrivera8815]

@@carphotography thank after I wrote that i figured out. Thank you for responding I'm still going to see that video. God bless 🙏

[@robertkajor3774]

If i dont put material straight will this method realign design to cut properly?

[@carphotography]

yes, it will use the reference marks to realign iti :D

[@Ticktockbbk]

Why do you send and not hit start from your pc? Just asking.

[@carphotography]

i have seen the file get corrupted as it is sent over, if you send to the laser first you can check on that screen and make sure it looks good and then it is already in the laser memory. thats my understanding :D