My dude, I started a valve cover gasket replacement a few weeks ago. I got a little ambitious and took the entire plenum apart, replaced vacuum and coolant lines as they were super dried out. My buddy helped and unfortunately snapped the fittings off the vacuum switch valve. Needless to say it was a hectic situation and now, here I sit, with a box of new OEM parts and a FSM but no original pics of the disassembly. This video was a great reference. Thanks for taking the time to make it.
I have 1989 truck 3.0 same you but when buy it someone did egr delete but cruise control not working. I tried couple things but not getting back to work
Dude Since you are doing a 3.4 swap, what are you planning to do with the 3VZE engine harness? I could use it since my ‘92 has seen some serious use and I’m not talking about highway miles 😁 She’s been used in all sorts of terrain from the east coast to middle America
Hi there, can u please give some information about the v-belts as well please, and also how to tight them, and also would like to know about how many brackets are there on this engine and where are they located. I have like 3 or 4 brackets sitting outside, the guy who removed the engine was unable to install the new engine and I don't know where they go
On the timing cover it’s pretty self explanatory. Factory comes with 3 or 4 bolts on the top that your spark plug wires connect to (via plastic connector), and for the rest just put a bolt in every hole on the timing cover
I have a 4runner with the same engine. I bought it in October and the precious owner said it needs a tune-up. Should i trust a friend to do it himself? He does all the tune up on his other vehicles
Bro the Fan Shroud is vital to cooling... Just saying. The way you have it without the shroud renders the fan useless.. The shroud makes the air go through the radiator thus cooling it.. Without the shroud the air just goes around the radiator not cooling it.. I promise.
Where is the blinker relay location? I can't find it on my 93 3.0 5 speed. I have no blinkers but I do have hazard's. I bought a new blinker relay but I haven't found it yet. Some say to the left of the steering wheel, some say near vent on the left of steering wheel. The Toyota dealer's diagram shows it to the left of steering wheel.
Hey body. The problem is the guys sold the truck to me. He removed all small houses because he said not needed. But have. 2 problems A/C. Not working and cruise control but are know for a/c and cruise control need to connected to small houses. Because I tried For a/c. Install new. Relay. And nothing changes
At the 3:40 mark there is a hose that is touching the power steering fluid. I believe it carries coolant as mine blew up. Could you help me identify what that hose is so that I can order the correct one and get it swapped out? Thank you
Hello I eliminated the her and now tge truck shakes a lot and turns off and smells like gas what can I do to fix that. And sometimes there is little explosions
My dude, I started a valve cover gasket replacement a few weeks ago. I got a little ambitious and took the entire plenum apart, replaced vacuum and coolant lines as they were super dried out. My buddy helped and unfortunately snapped the fittings off the vacuum switch valve. Needless to say it was a hectic situation and now, here I sit, with a box of new OEM parts and a FSM but no original pics of the disassembly. This video was a great reference. Thanks for taking the time to make it.
Glad I could help
I own a 91 four by four and I haven’t had any major problem with it! Thanks very good information.
Enjoyed the video my friend in the middle of swapping out a seized one of these this will definitely come in handy in the next couple weeks
Great video thank you
Like your video, been running my 1988 3.0-would never in a million years delete anything og...that's some bad info!
Aye bro just questions about the EGR delete. Can you still travel a long distance with that delete?
Yes
PLUG HERE , PLUG THERE, the heck!
I will save this video in case I ever need to know where my fan shroud goes.
Thanks
Disculpe este video no c podrá traducir en español?
Is there one hard line you left unplugged on the intake? Can't tell in if you did or not??
I have 1989 truck 3.0 same you but when buy it someone did egr delete but cruise control not working. I tried couple things but not getting back to work
I did the EGR delete on my 3.0... and since it has nothing to do with cruise control... my cruise remains working great.
Do you happen to know if there is a MAP sensor and if so where is the location?
Dude
Since you are doing a 3.4 swap, what are you planning to do with the 3VZE engine harness?
I could use it since my ‘92 has seen some serious use and I’m not talking about highway miles 😁
She’s been used in all sorts of terrain from the east coast to middle America
sorry, its sold with the 3.0 , I already have a buyer, ripping the motor out this coming week
@@NuttyNu
All good, didn’t hurt to ask though
How much are these worth? I got one with 170k miles but in the future i will swap a 3.4 😜
@@webkikif sold mine for 450
@@NuttyNu $450 for the engine?
I’ve been having problems with the cold start injector
Hi there, can u please give some information about the v-belts as well please, and also how to tight them, and also would like to know about how many brackets are there on this engine and where are they located. I have like 3 or 4 brackets sitting outside, the guy who removed the engine was unable to install the new engine and I don't know where they go
Can you show me the input and output coolant hoses for the heater core in the engine bay. I plan to do a backward flush to get the heater working-thx,
Quein me puede decir donde van conectadas las manqueras de vacio de este mismo motor tengo una linea que noce donde va colocada ?
Needed to see what bolts go to where on the timing cover
On the timing cover it’s pretty self explanatory. Factory comes with 3 or 4 bolts on the top that your spark plug wires connect to (via plastic connector), and for the rest just put a bolt in every hole on the timing cover
I have a 4runner with the same engine. I bought it in October and the precious owner said it needs a tune-up. Should i trust a friend to do it himself? He does all the tune up on his other vehicles
yes, if he is knowable in engine tune up, you should be fine
Yep, and these really are great engines.
Won’t win a drag race but will still be running when the race car hits the junkyard
What is the advantage to getting rid of the egr?
Ok thanks
Bro the Fan Shroud is vital to cooling... Just saying. The way you have it without the shroud renders the fan useless.. The shroud makes the air go through the radiator thus cooling it.. Without the shroud the air just goes around the radiator not cooling it.. I promise.
ok, putting it on now
Have you considered doing a cross over exhaust delete.
No. I did a 3.4 swap
Where is the blinker relay location? I can't find it on my 93 3.0 5 speed. I have no blinkers but I do have hazard's. I bought a new blinker relay but I haven't found it yet. Some say to the left of the steering wheel, some say near vent on the left of steering wheel. The Toyota dealer's diagram shows it to the left of steering wheel.
Below drive kick panel
Hey body. The problem is the guys sold the truck to me. He removed all small houses because he said not needed. But have. 2 problems A/C. Not working and cruise control but are know for a/c and cruise control need to connected to small houses. Because I tried For a/c. Install new. Relay. And nothing changes
You don’t need AC or cruise control. You’ll be fine. Those are useless
What was or why was the egr deleted and purpose for deleting the EGR Valve??? Please help n respond THANK YOU GREATLY...
JUST DO IT
How come you keep the stock air filter? Should you change it so its not restricted?
stock it better
At the 3:40 mark there is a hose that is touching the power steering fluid. I believe it carries coolant as mine blew up. Could you help me identify what that hose is so that I can order the correct one and get it swapped out? Thank you
That’s the AC line
@@NuttyNu Okay, certainly not the source of the coolant blow, thank you!
How do you replace the distribuidor for a 1990 toyota pick up v6 3.0
What would cause the engine to stay at a high idle and sometimes fluctuate?
Coolant. Bleed it. Or may be low
Have you had video you remove your alarm from your PU?. I want to remove it completely from my PU too but I don' t have a guide line. Thanks.
What alarm ?
@@NuttyNu car alarm which you mentioned you would do it in Summer?
I never ended up doing it
@@NuttyNu Thanks
Where did you purchase your stainless clutch cylinder line?
eBay.
Hey dude You don’t have cruise control. Issue after you dine egr delete
No cruise control isn’t effected by it
Hey man, what rpm does your engine idle at?
shy of 900rpm
Hello I eliminated the her and now tge truck shakes a lot and turns off and smells like gas what can I do to fix that. And sometimes there is little explosions
you might have forgot something ? I would go and double check
Put it back to stock like Toyota intended it to be
👍👍👍👍👍👍👍👍👍👍👍. ❤️❤️❤️. 🌳🌎.
I have a 1994 Toyota t100 4x4 DX,5 speed 3.0 motor,and i was thinking about selling it
If anyone ever needs parts contact us 👍 we are and all social media platforms we also offer free shipping on certain items @yodagang
J'ai un 4runner 1995 qui me fait peur quand il marche pendant un kilometre le moteur éteint aide moi svp