KA1 0.2ohms Z2 Mesh Coil Recotton (GeekVape Zues Z Subohms)

KA1 0.2ohms Z2 Mesh Coil Recotton (GeekVape Zues Z Subohms)
Recotton of KA1 0.2ohms Z2 Mesh Coil
Please Like, Comment and Share
#GeekVape
#ZuesZsubohm
#Meshcoil
#Ka1
#Recottonmeshcoil
#vafesafe
#geekvapesetup
#2021subohms

[@MpetersenTamTD]

Ok, you showed all the easy stuff. Now show how the hell you got the center piece out of the outside piece ORIGINALLY. Once it;s loose this is a piece of cake. I've tried on one of mone for days and it just will not come out. Show how you did it. The angled driver with a hammer tap is not it for sure. It need to be extracted styraight out or it siezes inside the outer shell.

[@gagipro92]

Same here, won’t come out.
Did you find a way?

[@vapinggaming]

AGREED. The only other video I found, the guy made some roughly made custom nippers to do a reverse grab from the inside where they can kind of hook on to the inner edge for some resistance. Otherwise... I'm sitting here at a loss.

[@sparkiz7108]

​@@vapinggaming easy to remove need small hex tip and couple times hit not to hard in center middle corner

[@vapinggaming]

Can you show you ORIGINALLY removed the inner shell? Your method shown here, as everyone has stated, is impossible on the first dismantling.

[@saifululum3095]

membuka coilnya serem, dari master coil tidak ada tool bawaan yaa gan

[@SiRafael]

Hello, can you give me the link where you bought this cotton? Im looking for strips like that and can't find. Very good job!

[@itsmeremember1435]

Online shop.. Loc.???? Are you in the PH?

[@phuongluu578]

Thanks a lot. May i ask, you just recotton but keep the used coil right? If it's correct i must think about how to clean mine old coil ( the web metal part).

[@itsmeremember1435]

Yes thats right.. if your mesh coil is in a good condition just clean it and put it back again.. on my video is an option too.. hehehe btw.. thanks

[@nicholasclarke4474]

Wh@ up n d house my nigga..... finally I just might have found a bloke who knows how to rebuild the coils of a geekvape aegis x with zeuss tank yeah boy fuckn a..... one thing I'd love to know is where you get the cotton strips from I've been looking everywhere..... radical horse thanks for th@ now ill save the video to its own playlist.

[@fendyphang6041]

What kind a rebuild kit the one u use for

[@itsmeremember1435]

I use pnp vm6 rebuildable coil.. just search it or order it from online..

[@agusmulyana-xp8ej]

Ka kapas rbk yg saya beli kurang lebar jadi liking terus mohon saran nya atau ling untuk beli rbk nya

[@-65_racing-official91]

how many millimeters do you use a hex wrench?

[@rickchristiangalfo9600]

Pwede poh makita Kung saan Naka point Yung dalawang stang ng strip kase po sakin nag check atomizer eh Baka Mali lagay ko

[@itsmeremember1435]

Wag nyo po pag sabayin ung dalawa.. Kahit san don pwd maging + or -
Ung isa fold mo plabas.. Tpos ung rubber white and ung isa fold mo sa ibabaw sa rubber pgkatapos ung gold plate na pang lock nya

[@rickchristiangalfo9600]

Okay poh thanks

[@javevy5330]

Saan nkkbili sir Ng coil lng nya?

[@itsmeremember1435]

Vm6 pnp rebuildable coil po.. search nyo lng po sa shopee..

[@russeldazzle8823]

Anung coil yang pinalitan mo idol?

[@itsmeremember1435]

Rebuildable pnp coil idol.. ung VM6 0.15 ohm

[@reignelevenn2008]

san ka nakabili ng rebuild kit? pwede pa send ng link?

[@itsmeremember1435]

Shopee lng po.. Search nyo lng pnp vm6 rebuild kit

[@GenjiGaming-rt9jk]

Ang hirap tanggalin boss ayaw talaga matanggal ng coil

[@itsmeremember1435]

Gnun tlga un boss matigas sa una.. Pero mahanap mo ung kiliti nya sandali lng un

[@Sinchon07]

what rbk you use

[@itsmeremember1435]

Vm6 rebuildable kit

[@itsmeremember1435]

PNP

[@stevengoldgetter]

What kind of cotton are you using i cant find any like it?

[@itsmeremember1435]

Im using rebuildable kit from PNP Coils VM6

[@gtavunexpected6272]

Boss ano size gamit mo pang bend?

[@nasibiryani]

How much cotton you used in single rbk?

[@nasibiryani]

ive used 5 sheets but its leak after 1 hour

[@itsmeremember1435]

You dont need more strip of cotton.. You need to do is to cover all 4 holes outside of the coil.. Try to see on 4:22.. Sample video.. Ill make it sure that it cover well to prevent leak

[@nasibiryani]

@@itsmeremember1435 nah, i never noticed that when rebuild the coil😌, im only pay attention to the inside base

[@nasibiryani]

@@itsmeremember1435 did you ever do the dual mesh coil?

[@nasibiryani]

@@itsmeremember1435 thanks for the advice, maybe I'll try later👍👍👍

[@jgaming9646]

lods may link kaba sa shoppe kung anong cotton gamit mo 😁

[@itsmeremember1435]

shopee.ph/product/260233711/3757789706?smtt=0.68944847-1635227302.9

[@vanxtine1234]

Sa anung rebuild kit yang ginamit mo idol ?

[@itsmeremember1435]

Sa mga pnp coil rebuildable idol.. ung 0.15ohms gmitin kasi flavored tlga pra sakin

[@junai9249]

pakek rbk apa tu mad

[@nasibiryani]

Drag x vm6

[@shuramuren]

san nakakabili sir?

[@itsmeremember1435]

Order po from shopee

[@MpetersenTamTD]

@0:44. NOPE! Not how it works.