How to Rebuild PnP VM5 Coil Head with VAPJOY DIY Rebuild Kit | Tutorial
HTML-код
- Опубликовано: 13 сен 2024
- VAPJOY DIY Rebuild Kit for VINCI VM5 0.19ohm. It includes 10pcs Ni80 Mesh Coils 0.19ohm, 40pcs Cut cotton and 1 Rod.
VAPJOY Rebuild Kit comes with more thicker brass screwing plate for more durable usage.
Please watch our tutorial video before your rebuild, any question, feel free to contact us:
For Technical support: vince@vapjoy-ecig.com
For wholesale: wholesale@vapjoy-ecig.com
Stay tuned and more DIY Rebuild Kit will release to fit other pod too.
Thanks
i bought one of this kit i was a little hesitant since i didn't knew if they could work but damn this rebuild kit is awesome the only hard part is trying to pry the vm6 coil they hard to open but other than that im happy i bought this before this i was using the wotofo pnp coil but they hard to find unless you order from their website and that's a lot of money thank you vapjoy you guys rock
@Mirtto what you mean the mesh and the cotton?
Good job!!!
thank you, my dear friend.
Is it Compatible with new pnp x coils ?
Find the rectangle on the inside for …. What?
Hello! tell me which kit is better suited for recovering ASPIRE AVP PRO COIL?
When would this be necessary?
Is the process of rebuilding the vm4 coil is the same as the vm5 and vm6?tnx!
sure, almost same, as long as you take care the direction when nail inserted through the coil head.
@@vapjoy84 ok, tnx!
Tem para o xros de 0.8 ohms ???
Got vaporesso xros rebuild coil?
we don't released it yet. thank you concerns.
No, could not turn it so the hole was open, not buying rebuild kit unless I can make it happen on an old one.
does your vapjoy cotton suitable for voopoo vm6 (0.15ohm) coil too?
vm6 is same as vm5. both can use Vapjoy M size or L size cotton.
@@vapjoy84 my country only sell one size? did not indicate what size? for vinci(X) / rpm / caliburn / koko / boost.. so.. can fit?
@@AJ-lb8tu That's standard M size
@@vapjoy84 so can fit! so i'll place my order.. thank you very much for your reply..
can i make it on voopoo vm6 coil
Nakakainis panoorin nanginginig yung kamay hahaha
How many time you can do this in a coil? Hindi ba nag kaka dent yung coil while holding it with plies and tweezers?
when use plier hold the coil head, it should make too hard or the coil metal will bent, just make sure it not turn than it is enough
strength to hold it.
Where can I buy this? can't see it on your site
send email to us and you will guaide to buy.
pwede ba sa smok nord yan boss?
smok nord is with other RBK, You check our previous video
Where can I buy one at?
aliexpress.com
Купил такие на 0.2 ом. Но у меня дома есть Geekvape z coil на 0.2 ом. Разобрал его и увидел что сетка идентична этой. Решил заменить для него. Я не криворукий и сделал все идеально (не отличить от оригинала.
Только вот нюансы.
Работает более менее на 35-40 ват. Вкус никакой. Чувствуются какие-то непонятные вкусы.
Второй нюанс, на 50 ваттах спираль краснеет и получается гарик. В общем использовать невозможно к сожалению.
Pede po ba sa drag x yan
yes, it compatible with VINCI VM5 and vinci vm6
When your products came out on the aliexpress site, I was happy. But he didn't have time to place an order. Now, delivery to Russia is not available. Why? What for? for what? Now you have to order wotofo
this because Russia law forbidden seller ship vape product to Russia from aliexpress store.
if you need the product for rebuild, you may contact us by email, and we will solve the shipping issue, thank you.
@@vapjoy84 great news for me. thanks!
pwede poba yan sa vinci x lods?
fit for PnP VM5 or PnP VM6 coil head rebuild.
where can i contact you
vince@vapjoy-ecig.com