Very professional. Great job with the video, speaking, and craftsmanship working with the tools! One of the best do it yourself maintenance videos I have seen.
This video on how to do this is the best that I have seen. It has helped to eliminate the fear that I have about performing such an action. Thank you for a great video.
Thank you so much! I'm glad to hear it's helped eliminate any fears. It's pretty straightforward process as most transmission fluid and filter changes go, its just that pesky exhaust pipe lol. If you have any questions just let us know! Thanks for watching and commenting 🙂
This video is the only reason I even had hope of being able to do this in my 2017 6L80. Start to finish today 1.5 hr from loosening the 1st bolt to refilling. Thank you so much. You saved me an absurd amount of money from local shop.
I also think this is the best video that I have seen for this procedure. I have seen one where it called for using a tie down strap to pull down on the exhaust to get the pan off but it never talked about removing the heat shield. I am going to be doing a filter change soon and this video has been an excellent help.
I have used youtube for many repairs/projects. It can be great, but it can also create nightmares. I try doing most repairs on my own, but certain ones aren't worth the hassle. I was doing my research and read many comments that the pan would not come out easily for some. At that point you're left with removing other things or using a ratchet strap which can create other issues. I called my local transmission shop and asked what they charge. With parts/fluid and labor it's only $170. Likewise, I once rotated my tires, to find out the shop I get my tires rotates them for free. As far as this video. The transmission gasket does not need replaced unless obviously damaged. They are meant to last the life of the transmission. The filter seal many people struggle to remove, does not need to be removed, unless it's leaking. I get not everyone has access to local shops that may be reasonably priced, but don't screw your vehicle up, by trying to DIY it to death. Your time is worth something, so instead of spending hours doing something another man can do in 30 min, spend the money and get outside and play catch with your kids.. lol
He's right it does work, just scoop most of the fluid out so your not volleying with that.. and have a little patience. I know this works on 6L80 transmission on most of the later Silverados, Tahoes, Suburbans, Vans, etc. even at least the last 3 generations of some. This is by design! If your space is closed up, there's a good chance your exhaust has made contact with something like the ground and is bent or possibly your transmission is hanging down lower for some reason, like rear tail mount is worn out or crushed. I'm posting this to hopefully help others, not for arguments sake. Pan Removal Trick: I have 2018 Tahoe 6L80 trans. and the pan will come right out! Not sure if your ride will have it (i know most do), but I removed the heat shield on passenger side of pan (2 bolts). Then I was able to slide the pan over to passenger side about 3 inches, then twisted the front of the pan towards the driver side and it came right out! Removing the little heat shield gives you lots more room. If you look at the back of the pan (shallow end), there is a little raised area on the bottom about 3 inches from the passenger side, that spot is the point that will allow you to move passed the exhaust y pipe (cross over pipe). Hope this helps!! 👍
This is the best video I've ever seen for the trans oil change. Didn't know about the gasket, and the method shown to removing it was perfect. Great job!
This is one of the best videos that I have seen on replacing the filter and seal on a 6L80 transmission that I have seen. It makes the task so much easier. Today I replaced my oil pan and filter on my 2014 Silverado. The pan came right off with ease. And went back on the same way. The hardest part was replacing the filter seal. I didn’t pay close enough attention to the install. I didn’t invert the socket and I bent the seal and had to buy another one. Thanks to the creator.
I've done a bunch of transmission filters on the 6L 90 if the filter stays in the gasket with no issues you don't need to replace it if it will fall out easy then replace it but if it's a firm pop in with the new filter leave the old gasket in there.. you run the risk of damaging stuff if you try to pry it out
Thanks for the tip of putting the 15/16” socket on backwards on the extension. I have driven hundreds of seals on my farm equipment and never thought of that. Big flat surface instead of a lip. 😊
Perfect, the VERY best on You Tube for this procedure. Was expecting the pan removal fight so many other channels preach about. Your approach, sliding, twisitng etc. made me say, well it can't be that bad, lets do this. And sure enough your technique nailed it, done in about 2 hours... thanks much for the calm, explicit step by step explanations. You rock Sir!
Awesome video! Very bright and close up to see exactly what you did. Making following ur steps that much easier. What look like took you an hr took me 6 hrs. I had some hiccups. The rachest strap on the exhaust was all i needed to clear the exhaust with the pan didnt have to loosen any bolts. I wouldnt of been able to get it done with out this video thank you!
I watched this video three time. First to see how you did it. Next One for taking the cover off. Then again when I was stuck trying to get it back on. Working on a 13 suburban. It did fit but if I had not seen you do it I would have given up and pulled the exhaust loose. Many thanks man👍
Great video, and I like how you showed how to maneuver the pan to one side and twist and it came out easy. I am going to try this. I just did mine but did not remove the pan. I am going to try your method. and going to buy that transfer pump. Thanks for making this video.
I did mine WITHOUT dropping the pan out of the vehicle. My 2018 silverado has the exhaust Y-pipe running under the rear of the pan so you cannot drop it out. After some manipulation , I swung the pan over to the RH side of the truck about 3". Pop the filter neck out of the pump first. No messing with exhaust pipes , or transmission mounts ,heat shields , jacking anything up at all. Swing the filter neck around the case and lift it out. BTW , that GM pan gasket is reusable. It does hold about 7 to 8 quarts when doing this.
great quality video! i have to do this in my near future and i got a lot of good information from your video, i appreciate you posting this. just a tip with my own personal struggle while trying to find a transmission leak i have: i saw in the owner's manual they have a cold level check procedure where you idle and check the level at 80 F - 90 F which you can achieve by just idling (when its warm out anyway, not sure about when it's cold out lol). it would just verify safe operating level prior to when you drive around and heat the fluid up to do the more accurate hot level check at full operating temperature like you did.
Thanks for the tip! I'm glad you found our video helpful and informative. If you have any trouble getting your pan completely off you may have to pry or ratchet-strap the exhaust a couple centimeters down. There are a few videos on RUclips detailing how to do that, but hoping you're just fine. Thanks for watching and commenting! 😊
Nice job,when you put the seal in I use a bit of petroleum jelly or grease to make it stick to the socket to avoid cleaning it again after dropping it,then wipe it off when it's in place.You can also use grease to keep the gasket in place.
If your watching this and you don’t have a dipstick there is I rubber plug under that heat shield. With a little harbor freight pump you can get the oil out that way. Be sure to measure it and return the same amount back in that hole. I pulled my pan and changed the filter and gasket also. As another tip replace fluid with mobile one synthetic LV ATF HP BLACK label only. And that can stop early onset Chevy shake. OEM fluid trashes the torque converters. Hope that helps somebody
Awesome! Glad to hear everything worked out for you. I'm still not quite sure why some vehicles have the clearance and some don't but I'll keep searching. Thanks for watching! 👍
In other videos folks struggled badly with removing the pan, I've seen a couple vids where they "had to" jack up the transfer case and pull down the exhaust for room, yet you were able to get it out w/o any of that. You seemed to be on the right track removing the heat shield, or at least I think so.Those two bolts are way easier than jacking the tranny up by the transfer case.
Thank you, I refused to believe it was necessary to do all of that to remove the transmission pan. The heat shield might give that half an inch more of clearance to slide it over but I figured to show it since thats what I was seeing down there. Hope yours goes as smoothly, thanks for watching! 🙂
This video is amazing great job. I personally would have used amsoil and also drain the lines to get full benefit of having all old oil out of tranny and new one in.
I can tell every DIYers outhere that this do not work like that on every truck; my pan never had the required clearance without jacking the trans, losening the trans bushing bolts, strapping thr exhaust + losening the exhaust manifold flange nuts. It would not clear without losening the exhaust. You are a lucky guy that the pan came off like this. Go buy a loto ticket haha
Haha! Thanks for your comment. Honestly wasn't sure if it would work or not, but managed to squeeze it out relatively quick. I guess the old "your mileage may vary" applies with this project 😉
Sorry to hear that! You could try a pry bar and force the exhaust pipe downwards or use a ratchet strap with a jack. You could also loosen the bolts up by the exhaust manifold on each side, I don't think you need to remove the bolts completely but not sure. Hope this helps you and good luck!
I’m glad I’m seeing this comment. Because I just spent way too long rewatching the exact way he does it and trying for that thing not to be even close to coming out.
ive never seen a pan come off before with out using a 2x4 jammed into exhaust pipe to pry and lower it a 1/4 inch . hmmm . maybe they changes the pipe a touch for 2015 ??
Exactly, If you let the oil drain by gravity for 24 hours, the fluid that is in the torque converter will be drained and then you can make a complete change of the transmission fluid.
@@TrickShiftGarage update: reused the old bolts when torquing to 80ft lbs and one of them snapped. Had to get a new replacement one. Then I realized you said inch and I had it set to foot
This may be a silly question but i need to know. Does the transmission need to be in drive with the emergency brake on to check the fluid? Like the old days. (2017 sierra 6 speed 5.3)
I been wanting to do my transmission oil changes on my 2016 suburban this videos just made me go do it my only concern was if i hade to losen the support but your transmission looks just like mine the pan should come right out i think 😅
We're glad you found motivation to get your transmission oil change done! I wasn't sure if I had to loosen the exhaust pipe or mount either. It's been a mixed bag between having no problems to having clearance issues, hopefully yours go smoothly as mine went! Good luck! 👍
@TrickShiftGarage questio do you think it's a good idea to put some lucas transmission oil as well? and do I need to buy a pound per pressure rachet or it's optional am doing the oil change this week end
Total was about $100, mostly on the Dexron VI fluid, then filter and gasket. But I also bought a new set of bolts since one was missing. Thanks for watching! 👍
I don't know if it was from the factory as I bought mine at 82k miles but I remember a couple of the bolts were pretty loose when I was taking the pan off, strange. Thanks for watching and commenting! 😊
Hi, i hope some one can reply to my comment sotranmy transmission broke, so i got a mechanic putting a used transmission, but before installing it, new oil and filter was gonna go in, but at the moment of reming the oil and the pan, the mechanic told me that oil look very dark, and smell burn, and he no longer feel good abt installing it, is a very dark oil bad ? Is a burn smell bad ?
So I should do a trans flush ? Got my truck at around 123k miles I’m at 155k now I’m about to install a bypass so I can run cooler but all I’ve been seein about trans flush is after you do it won’t run good and you’ll be needing a new trans
@@chris1k_ yea that was my concern I had a good feeling I probably waited to long thanks for the info . What’s it cost to rebuild these 4l80’s these days ?
This video gave me the confidence not to ratchet down the exhaust, but for the life of me i couldn't find the right angle to get it out as easy as he does.
You can do it! 😊 I think the trick is sliding the pan toward the passenger side and inch or two and then rotate the front toward the driver side while moving it down out of the way. But if all else fails, the ratchet strap method should get the job done. Thanks for watching! 👍
Have you had any brake issues Because my brake pedal drop to the floor and at low speed it jerks but I have change the brakes lines and pads rotor booster but is still doing the same thing 01 Silverado 1500 4 wheels drive
Hello! Thanks for commenting! I've hadn't had any brake issues so far with my truck. If your brake pedal is dropping to the floor, I suspect a bad master cylinder. Check the whole system over for any leaks. If there is no leaks, I suspect the seals are bad inside the master cylinder. I hope this helps you, good luck! Thanks for watching 😊
Try loosening (not removing) the exhaust bolts up by the exhaust manifold or using ratchet straps to pull the exhaust down enough to get it free. Those are the tips that I heard to use. Hang in there it will come out! 👍
Hey is it possible to know which one is the temp sensor on this setup because I ordered a harness that’s different than this one and idk if it’s the white harness or the whole brown harness can you please help me out
Some of the other videos show using different prying devices to get the pan off. Obviously you did not need them. Also does that round gasket need to be changed every fluid service? Finally how much did you save doing it yourself as opposed to taking it to the dealer?
Hello! It's recommended to replace the round gasket for the filter on each change. I spent about $130 for the fluid, filter and gaskets (including the pan gasket). The Chevrolet dealership nearby quoted me $515 for this job. So overall, you would save around $400 by doing this yourself. Hope this helps! Thanks for watching! 😊
I noticed you cut the video of when you were rotating the pan and pulling it out. That white plastic piece keeps you from pulling the pan off. Surely you had some trouble with that. Why didn't share it? How did you get past that. I was never able to and it looks like you pipes are in the exact same place as mine. Just wondering.
My arm blocked the camera view completely as I was rotating the pan around so I cut that out so you wouldn't have to see my arm, sorry! Basically I slid the pan over toward the passenger side first, the lowered it what I could and rotated the front portion toward the driver side. Just go slow and it should come out. Hope this helps!
Thanks for the clarification. I was never able to remove the pan completely. I just cleaned everything in place. Awkward, but I got the job done. Thanks for doing the video. Gives the rest of us confidence to do the job and save some money.
If i may ask what was the milage on your truck when you did this video? and have you had any problems with this 6L80 transmission to date? as they are prone to issues
I had about 92-93k miles on her at the time the video was made. I haven't had any issues to date. I have heard about bad torque converters and such but I guess I've been lucky thus far lol. Thanks for watching ☺️
Nice video. I have a 2020 Suburban 6speed. My trans stick level at 150f is right on the hot 2nd dot. I noticed yours in right on the "H" within the hash marks. Am I over full?
Thank you! Personally, I always change the filter gaskets even though they are a pain to replace. That gasket seals the unfiltered transmission fluid from the filtered fluid, so it's important to keep that seal tight, which is why I always change it out with the filter. Hope this helps, thanks for watching! 👍
That will remain with the new fluid unfortunately. Another fluid drain would get more out of it though. A flush would totally clear it out. Thanks for watching! 👍
Is your truck a 2WD or 4WD and what engine does it have? The exhaust clearance issue some have experienced make me question what's different and is mine like yours?
Love the video, specially how you show exactly what you are doing. how many miles did your truck have when you changed the oil? is this the first one you've done on the truck?
Thank you! The truck had around 92,000 miles when I did this and yes, this is the first time I've done it on the truck. It wasn't too bad with the fluid transfer pump, made it less messy lol. If you have any other questions feel free to ask. Thanks for watching and commenting! 🙂
Sure, you could do one at that mileage. You could check the fluid condition (and level) first to see if it's necessary. We have a video on how to do it here: ruclips.net/video/b2Fugi0o2ko/видео.html Basically if the fluid is brown or black with little to no amount of red tint, it's time to change it. If the fluid is mostly red still you have some time. Hope this helps!
Yes, it could be your transmission fluid level is low or the condition of the fluid is bad. We have a video walking you through this process here: ruclips.net/video/b2Fugi0o2ko/видео.html If it doesn't solve the jerking at stops than you should probably take it in to get diagnosed. Hope this helps and thanks for watching! 👍
@TrickShiftGarage what is happening is that when i drive is good when i co e to a complete stop and it's my turn to go i give it a bit gas and it takes a sec or 2 then it jumps into gear and it feels like someone bumped me in the back !!! Weird
Awesome vid man! Ty! 07 Escalade here and looking to do this soon. I noticed you just used drive on ramps to get under there? Also? After you added the fluid, did you immediately back the truck off the ramps for fluid check? Or did you cycle the gears then back off the truck off the ramps? Im debating whether I can complete this with ramps only? Or do I need to jack up rear of truck as well and complete job as leveled as possible? Is the fluid you used full Sythetic? Thank you!
Thanks man we appreciate it! Glad its been helpful for you! Yes, I used just drive on ramps, those were bought at harbor freight lol. You shouldn't have to lift the rear of the truck to have access to the transmission pan, you should be able to get by with just the front ramps. After, I added the recommended 6 quarts, I backed it up off the ramps and took for a test drive, being gentle with it because i suspected the fluid level might be low. Once I came back from driving it around, I cycled through all the gears, holding them for a few seconds each, then putting it back in park and the checking the fluid level. I was indeed low so put 2 more quarts in, cycles theough the gaers again, the checked the fluid level and it was finally at a good level. I think I lost 8 quarts due to the truck fluid draining from the torque converter when I let it set for a few days after using the fluid extractor. Either way, it's always a good starting point to put back in the same amount of fluid that drained out, but still always check the fluid level afterwards. The fluid I used was AC Delco's Dexron VI which uses a synthetic based blend but either should work just fine, as long as it meets GM's specifications to be licensed as "Dexron VI". There are better fluid (Amsoil, Valvoline...etc) that use full synthetic formula, its really just up to you and your budget. Hope this helps, if you have any more questions just let us know! Good luck! 👍
Appreciate that share! Hey, when you removed the old transmission filter gasket, were there some knicks left on the mating surface after the removal? Thank you!
No, there wasn't any knicks, just make sure to be very careful and gentle not to gouge or carve the aluminum (i.e. whole chunks are missing) or the seal won't seal properly. If you lightly scratched or scuffed the surface, it should be fine and still hold. I know taking that seal out was a bit sketchy but sometimes you have to work with the tools you got and make the best of the situation. Make sure to clean up the surface area with brake cleaner on a rag and just wipe it all clean. 😊
@TrickShiftGarage actually, I realized you already figured you needed all 8 qts because the torque converter carries some too, but a good rule of thumb is to always replace what you took out. Thanks for the great video sir!!
It's still in there. You can always drain the fluid again to get more of the old fluid out. If you want all the fluid replaced a flush is needed. Thanks for watching! 🙂
Great video but I’m shocked you went back with AC Delco transmission fluid. Most people use Mobile 1 Synthetic LV ATF HP (Blue Label). It eliminates all the shudder, vibration and hard shifts most of these transmissions have.
Thank you! I wanted to make this video serve as a general reference so went with the factory fluid. I haven't had any shudders or hard shifts, so was fine with using AC Delco. However, I will definitely use a better quality fluid going forward like Mobil 1 or maybe Amsoil or Valvoline. Thank you for your suggestion, greatly appreciate it. 👍
Dropping the pan was not as simple as shown in the video. No mater what angle I turned the pan after taking the heat shield off it would not clear the internal components of the transmission nor the exhaust. I had no other choice but to remove the two 15mm bolts connecting my 4x4 transfer case to the crossmember and jacking it and my transmission up 1-1.5 inches up while at the same time using my neighbors bottle jack, a couple of 4x4 pieces of lumber and a heavy duty ratchet strap I pulled the exhaust 1/4-3/4 of an inch down too get the pan to properly clear and come out. 3-3-1/2 hours later I was able to finish the job but not without gaining a few more gray hairs that I don’t want at my tender age of 33. As a warning to others looking to give this a try it’s a going to be a hit or miss if this will work or not and I recommend having a few extra tools laying around because once you get started your committed till the end. Good luck, I hope it works better for you then it did for me.
Ah ok, thanks for letting us know, I'm still not sure why some trucks can and others can't but I'll keep searching. Thanks for watching and commenting! 🙂
If you have a 2017 Silverado, it won't be this easy. There's not enough clearance to remove the pan. Need to drop the exhaust or just take it into the dealership. I was able to replace the filter and most of the fluid, but didn't clean it as planned. I could not remove the pan despite hours of trying every which way. It was getting dark so put it back together.
I'm not sure. It did take some jiggling and turning in order to clear the exhaust pipe. I think removing the heat shield on the passenger side helps some by allowing the pan to slide to that side before rotating toward the driver side. That's what worked for me. Thanks for watching! 🙂
@@TrickShiftGarage one guy put a ratchet strap on the C.Converter to kind of cause that exhaust pipe to have a little more clearance not sure if it was on the Sierra or Silverado. But thanks for the great video. liked and subscribed....
Love the video, but I think I am probably the only person who has a complaint. 2015 Chevy Silverado 1500. Removing the pan is simple up until you try and shimmy the cover off. Maybe a different type of exhaust system it looks the same but the clearance is not because I can't for the life of me get the cover on as it is snagging on that corner device that youre clearlyy shimmying around in the video. There seems to be a 1/4" difference. Did you drop the exhaust pipes at all?
No exhaust modification, it's all stock. It really is a mixed bag, some are able to work it out and some can't. Either way, hope you can get yours out. Thanks for watching! 👍
I watched 8 videos about this transmission job so far. Your video is by far the most clear and easy to understand. Thanks for sharing!
You're very welcome, we're glad that you found the video helpful. Let us know if you have any questions and thanks for watching! 🙂👍
Very professional. Great job with the video, speaking, and craftsmanship working with the tools! One of the best do it yourself maintenance videos I have seen.
Thank you so much for the kind words! Glad you found the video helpful to keep your truck going for many more miles. Thanks for watching! ☺️
This video on how to do this is the best that I have seen. It has helped to eliminate the fear that I have about performing such an action. Thank you for a great video.
Thank you so much! I'm glad to hear it's helped eliminate any fears. It's pretty straightforward process as most transmission fluid and filter changes go, its just that pesky exhaust pipe lol. If you have any questions just let us know! Thanks for watching and commenting 🙂
This video is the only reason I even had hope of being able to do this in my 2017 6L80. Start to finish today 1.5 hr from loosening the 1st bolt to refilling. Thank you so much. You saved me an absurd amount of money from local shop.
Thanks for watching and taking the time to leave a comment!
I also think this is the best video that I have seen for this procedure. I have seen one where it called for using a tie down strap to pull down on the exhaust to get the pan off but it never talked about removing the heat shield. I am going to be doing a filter change soon and this video has been an excellent help.
I appreciate the very thorough explanation and attention to detail. If only every tutorial video on youtube was made like this! Thank you!
You're very welcome! Thanks for watching and commenting! 😁
This is the best damn instructional video I've ever seen. Nicely done. Thank you for all of your time and effort giving us this information. You rock.
We're glad you found this video helpful, thanks for watching! 🙂👍
Agreed with the others that this the most clear and straightforward video on RUclips. Doing my fluid change tomorrow with confidence now!
Wow... this is the third video I've watched and the only one that the pan is actually removed. Bravo!!
This is by far the best video on RUclips demonstrating this process.
Thanks for watching! 🤟
I have used youtube for many repairs/projects. It can be great, but it can also create nightmares. I try doing most repairs on my own, but certain ones aren't worth the hassle. I was doing my research and read many comments that the pan would not come out easily for some. At that point you're left with removing other things or using a ratchet strap which can create other issues. I called my local transmission shop and asked what they charge. With parts/fluid and labor it's only $170. Likewise, I once rotated my tires, to find out the shop I get my tires rotates them for free. As far as this video. The transmission gasket does not need replaced unless obviously damaged. They are meant to last the life of the transmission. The filter seal many people struggle to remove, does not need to be removed, unless it's leaking. I get not everyone has access to local shops that may be reasonably priced, but don't screw your vehicle up, by trying to DIY it to death. Your time is worth something, so instead of spending hours doing something another man can do in 30 min, spend the money and get outside and play catch with your kids.. lol
He's right it does work, just scoop most of the fluid out so your not volleying with that.. and have a little patience.
I know this works on 6L80 transmission on most of the later Silverados, Tahoes, Suburbans, Vans, etc. even at least the last 3 generations of some. This is by design!
If your space is closed up, there's a good chance your exhaust has made contact with something like the ground and is bent or possibly your transmission is hanging down lower for some reason, like rear tail mount is worn out or crushed.
I'm posting this to hopefully help others, not for arguments sake.
Pan Removal Trick: I have 2018 Tahoe 6L80 trans. and the pan will come right out! Not sure if your ride will have it (i know most do), but I removed the heat shield on passenger side of pan (2 bolts). Then I was able to slide the pan over to passenger side about 3 inches, then twisted the front of the pan towards the driver side and it came right out! Removing the little heat shield gives you lots more room. If you look at the back of the pan (shallow end), there is a little raised area on the bottom about 3 inches from the passenger side, that spot is the point that will allow you to move passed the exhaust y pipe (cross over pipe). Hope this helps!! 👍
Thanks for all the tips, much appreciated! 😊👍
This is the best video I've ever seen for the trans oil change. Didn't know about the gasket, and the method shown to removing it was perfect. Great job!
Thank you! Glad you found the video helpful. Thanks for watching! 🙂
This is one of the best videos that I have seen on replacing the filter and seal on a 6L80 transmission that I have seen. It makes the task so much easier. Today I replaced my oil pan and filter on my 2014 Silverado. The pan came right off with ease. And went back on the same way. The hardest part was replacing the filter seal. I didn’t pay close enough attention to the install. I didn’t invert the socket and I bent the seal and had to buy another one. Thanks to the creator.
Cuánto es la presión de aceite en transmisión, la mía llega a 60 PSI, será correcto?
I've done a bunch of transmission filters on the 6L 90 if the filter stays in the gasket with no issues you don't need to replace it if it will fall out easy then replace it but if it's a firm pop in with the new filter leave the old gasket in there.. you run the risk of damaging stuff if you try to pry it out
@@anthonyc6571that's what I was wondering the whole time! I wasn't going to jack with it I was just going to leave it
Dorman makes a pan with a drain plug. Makes life much better.
Thanks for the tip of putting the 15/16” socket on backwards on the extension. I have driven hundreds of seals on my farm equipment and never thought of that. Big flat surface instead of a lip. 😊
First video i have seen where you did it without prying the exhaust down. Thank you!
Perfect, the VERY best on You Tube for this procedure. Was expecting the pan removal fight so many other channels preach about. Your approach, sliding, twisitng etc. made me say, well it can't be that bad, lets do this. And sure enough your technique nailed it, done in about 2 hours... thanks much for the calm, explicit step by step explanations. You rock Sir!
Great Job you Definitely have the Right Temperament for being a Mechanic. So many Mechanics I know are just a Miserable SOS.
Thank you, I appreciate the kind words 😊
Awesome video! Very bright and close up to see exactly what you did. Making following ur steps that much easier. What look like took you an hr took me 6 hrs. I had some hiccups. The rachest strap on the exhaust was all i needed to clear the exhaust with the pan didnt have to loosen any bolts. I wouldnt of been able to get it done with out this video thank you!
I watched this video three time.
First to see how you did it.
Next One for taking the cover off.
Then again when I was stuck trying to get it back on.
Working on a 13 suburban. It did fit but if I had not seen you do it I would have given up and pulled the exhaust loose.
Many thanks man👍
Glad you found the video helpful. It's a tight space for sure. Thanks for watching and commenting! ☺️
Great video, and I like how you showed how to maneuver the pan to one side and twist and it came out easy. I am going to try this. I just did mine but did not remove the pan. I am going to try your method. and going to buy that transfer pump. Thanks for making this video.
I did mine WITHOUT dropping the pan out of the vehicle.
My 2018 silverado has the exhaust Y-pipe running under the rear of the pan so you cannot drop it out.
After some manipulation , I swung the pan over to the RH side of the truck about 3".
Pop the filter neck out of the pump first.
No messing with exhaust pipes , or transmission mounts ,heat shields , jacking anything up at all.
Swing the filter neck around the case and lift it out.
BTW , that GM pan gasket is reusable.
It does hold about 7 to 8 quarts when doing this.
great quality video! i have to do this in my near future and i got a lot of good information from your video, i appreciate you posting this. just a tip with my own personal struggle while trying to find a transmission leak i have: i saw in the owner's manual they have a cold level check procedure where you idle and check the level at 80 F - 90 F which you can achieve by just idling (when its warm out anyway, not sure about when it's cold out lol). it would just verify safe operating level prior to when you drive around and heat the fluid up to do the more accurate hot level check at full operating temperature like you did.
Thanks for the tip! I'm glad you found our video helpful and informative. If you have any trouble getting your pan completely off you may have to pry or ratchet-strap the exhaust a couple centimeters down. There are a few videos on RUclips detailing how to do that, but hoping you're just fine. Thanks for watching and commenting! 😊
Nice job,when you put the seal in I use a bit of petroleum jelly or grease to make it stick to the socket to avoid cleaning it again after dropping it,then wipe it off when it's in place.You can also use grease to keep the gasket in place.
Definitely don’t put those things in a system that uses transmission fluid. Use transmission fluid to lube your seals
If your watching this and you don’t have a dipstick there is I rubber plug under that heat shield. With a little harbor freight pump you can get the oil out that way. Be sure to measure it and return the same amount back in that hole. I pulled my pan and changed the filter and gasket also. As another tip replace fluid with mobile one synthetic LV ATF HP BLACK label only. And that can stop early onset Chevy shake. OEM fluid trashes the torque converters. Hope that helps somebody
2017 Chevy Suburban Premier - This worked perfectly. The pan had plenty of room to come out in my case. Thank you!
Awesome! Glad to hear everything worked out for you. I'm still not quite sure why some vehicles have the clearance and some don't but I'll keep searching. Thanks for watching! 👍
What engine? I have 2018 silverado 4.3 v6 lt
@@antoniostewart9650 The 5.3 V8.
@@antoniostewart9650NO CLEARENCE ISSUES WITH 4.3. PAN WILL COME OFF EASILY
Good step by step, easy to see what’s involved in the fluid change. Good video.
Thanks for the kind words, glad you found it helpful. 😊
Harbor freight has a fluid vacuum that uses an air compressor to generate vacuum. Worked flawlessly on my suburban.
Thanks!
You're very welcome! Thank you so much for watching! 😊
Best tutorial on youtube! Thanks man!
Thanks for watching and taking the time to leave a comment! 🤟
In other videos folks struggled badly with removing the pan, I've seen a couple vids where they "had to" jack up the transfer case and pull down the exhaust for room, yet you were able to get it out w/o any of that. You seemed to be on the right track removing the heat shield, or at least I think so.Those two bolts are way easier than jacking the tranny up by the transfer case.
Thank you, I refused to believe it was necessary to do all of that to remove the transmission pan. The heat shield might give that half an inch more of clearance to slide it over but I figured to show it since thats what I was seeing down there. Hope yours goes as smoothly, thanks for watching! 🙂
I like the make shift seal insertion tool. Nice job!
This video is amazing great job. I personally would have used amsoil and also drain the lines to get full benefit of having all old oil out of tranny and new one in.
Agreed, can't go wrong with Amsoil! Next time I'll go for it 😉
I can tell every DIYers outhere that this do not work like that on every truck; my pan never had the required clearance without jacking the trans, losening the trans bushing bolts, strapping thr exhaust + losening the exhaust manifold flange nuts. It would not clear without losening the exhaust. You are a lucky guy that the pan came off like this. Go buy a loto ticket haha
Haha! Thanks for your comment. Honestly wasn't sure if it would work or not, but managed to squeeze it out relatively quick. I guess the old "your mileage may vary" applies with this project 😉
I second this comment. I am currently stuck with my pan laying on my exhaust and my pan will not “finagle” out like you did. Mine is hung.
Sorry to hear that! You could try a pry bar and force the exhaust pipe downwards or use a ratchet strap with a jack. You could also loosen the bolts up by the exhaust manifold on each side, I don't think you need to remove the bolts completely but not sure. Hope this helps you and good luck!
Yep, just took a stab at it and mine would not clear. Had to be innovative to say the least
I’m glad I’m seeing this comment. Because I just spent way too long rewatching the exact way he does it and trying for that thing not to be even close to coming out.
What a great video and attention to detail! Glad I subscribed! Happy New Year sir!
Thanks for the kind words, and I'm glad you found the video helpful. Happy New Years to you! 😊
ive never seen a pan come off before with out using a 2x4 jammed into exhaust pipe to pry and lower it a 1/4 inch . hmmm . maybe they changes the pipe a touch for 2015 ??
Perhaps so...or maybe it was already bent down before I bought the truck 😂
Awesome, thanks for sharing. Was there any reason you didn't put the pump extractor in the pan to pull the remaining fluid out?
You made that look so easy, thanks for sharing
Thanks for watching and taking the time to leave a comment! 🤟
I tried this and failed, but I will keep trying when the times come. Thanks for sharing
Exactly, If you let the oil drain by gravity for 24 hours, the fluid that is in the torque converter will be drained and then you can make a complete change of the transmission fluid.
Do you have to use the recommended HP transmission fluid or can you use the standard dextron 6?
The standard Dexron 6 is fine, thanks for watching! 🙂
@@TrickShiftGarage update: reused the old bolts when torquing to 80ft lbs and one of them snapped. Had to get a new replacement one. Then I realized you said inch and I had it set to foot
This may be a silly question but i need to know.
Does the transmission need to be in drive with the emergency brake on to check the fluid?
Like the old days.
(2017 sierra 6 speed 5.3)
thank you much about to do this coming weekend and it really gave me a better understanding of how to do properly.
You're welcome. If you have any questions just let us know. And thanks for watching ☺️
Thank you sir! Best tip: "take your time"...Appreciate the help.
You're welcome, glad to be helpful. 👍
I been wanting to do my transmission oil changes on my 2016 suburban this videos just made me go do it my only concern was if i hade to losen the support but your transmission looks just like mine the pan should come right out i think 😅
We're glad you found motivation to get your transmission oil change done! I wasn't sure if I had to loosen the exhaust pipe or mount either. It's been a mixed bag between having no problems to having clearance issues, hopefully yours go smoothly as mine went! Good luck! 👍
Thank you I think am all for it because am not trying to pay over 300 for just the transmission oil change
Lucky, I called my local Chevy dealership and got quoted 500 for this job, so glad to be able to help you save money. Let me know how yours goes! 😊
@TrickShiftGarage questio do you think it's a good idea to put some lucas transmission oil as well? and do I need to buy a pound per pressure rachet or it's optional am doing the oil change this week end
Did you notice much of a difference when you installed the K&N air filter?
Was already installed when I bought the truck so can't say I felt much of a difference in power, but it does sound awesome! 😎
Great Video I will be changing out the transmission fluid on my 2016 Silverado
Thanks! Glad you found our video helpful and if you have any questions just let us know. Thanks for watching! 😊
First time I've seen removing the heat shield. Can't wait to try that at my next trans service. That pan is a PIA to remove.
Did you forget to push the white switch back in? I had the hardest time getting it to go back up during the reinstall
Your video was very well done and easy to understand
Glad you found our video helpful. Thanks for watching! 🙂
Nice informative video. I think I can do this myself. How much did you spend on parts?
Total was about $100, mostly on the Dexron VI fluid, then filter and gasket. But I also bought a new set of bolts since one was missing. Thanks for watching! 👍
You did amazing job ,I learned how to do it.
Awesome! Thanks for watching!
Great video! Where can I find that oil pan with the quart marks? Thanks!
You can find that clear pan right here: amzn.to/45C6B9u
Thanks for watching! 🙂
This is great man!
Perfect 👍🏽 Video great Voice for it also!!
Great, glad you found it helpful. Thanks for watching! 🙂
Love it. Great Video and Awesome details.
Guess thats why im a subscriber.
Tyank you my Brother.
Real good indeed.
Thank you so much for the kind words. We're glad you found the video helpful. Thanks for watching! 🙂
my 2014 was missing a bolt in the trans pan from the factory also.
I don't know if it was from the factory as I bought mine at 82k miles but I remember a couple of the bolts were pretty loose when I was taking the pan off, strange. Thanks for watching and commenting! 😊
Hi, i hope some one can reply to my comment sotranmy transmission broke, so i got a mechanic putting a used transmission, but before installing it, new oil and filter was gonna go in, but at the moment of reming the oil and the pan, the mechanic told me that oil look very dark, and smell burn, and he no longer feel good abt installing it, is a very dark oil bad ? Is a burn smell bad ?
So I should do a trans flush ? Got my truck at around 123k miles I’m at 155k now I’m about to install a bypass so I can run cooler but all I’ve been seein about trans flush is after you do it won’t run good and you’ll be needing a new trans
It shifts kinda hard sometimes and sometimes it doesn’t so I’m assuming it’s time
I also have 135k on mine and was wondering if it were too late to do a flush.
@@wayneallen9849 my trans gave out about 3 months after this sad day just had it rebuilt
@@chris1k_ yea that was my concern I had a good feeling I probably waited to long thanks for the info . What’s it cost to rebuild these 4l80’s these days ?
@@wayneallen9849 mine was 3500 I believe with a 1 year warranty
This video gave me the confidence not to ratchet down the exhaust, but for the life of me i couldn't find the right angle to get it out as easy as he does.
You can do it! 😊 I think the trick is sliding the pan toward the passenger side and inch or two and then rotate the front toward the driver side while moving it down out of the way. But if all else fails, the ratchet strap method should get the job done. Thanks for watching! 👍
was it 8 quarts because you have the deep pan?
Have you had any brake issues
Because my brake pedal drop to the floor and at low speed it jerks but I have change the brakes lines and pads rotor booster but is still doing the same thing 01 Silverado 1500 4 wheels drive
Hello! Thanks for commenting! I've hadn't had any brake issues so far with my truck. If your brake pedal is dropping to the floor, I suspect a bad master cylinder. Check the whole system over for any leaks. If there is no leaks, I suspect the seals are bad inside the master cylinder. I hope this helps you, good luck! Thanks for watching 😊
Probably just need to do a brake fluid exchange. Since you did allowed air into the brake system when changing the brake lines
2019 and after has no dip stick, what are you working on
Well, I am in the mist's of trying to take off the pan, and mine is a 2017. so far no luck in removing the pan. Ugh!
Try loosening (not removing) the exhaust bolts up by the exhaust manifold or using ratchet straps to pull the exhaust down enough to get it free. Those are the tips that I heard to use. Hang in there it will come out! 👍
Great video bro!! U got the right angles and everything very precise thanks 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks bro! Glad the video was helpful for you. Thanks for watching! 👍
Hey is it possible to know which one is the temp sensor on this setup because I ordered a harness that’s different than this one and idk if it’s the white harness or the whole brown harness can you please help me out
Some of the other videos show using different prying devices to get the pan off. Obviously you did not need them. Also does that round gasket need to be changed every fluid service? Finally how much did you save doing it yourself as opposed to taking it to the dealer?
Hello! It's recommended to replace the round gasket for the filter on each change. I spent about $130 for the fluid, filter and gaskets (including the pan gasket). The Chevrolet dealership nearby quoted me $515 for this job. So overall, you would save around $400 by doing this yourself. Hope this helps! Thanks for watching! 😊
Does the 6l80e come with regular or synthetic from factory?
I think it's regular from the factory, but I could be wrong. Thanks for watching! 👍
Great video, Ima gonna change out the fluid on mine should I also replace the filter, it’s slipping and it has 85k miles on it
Hello! Yeah, I would replace the filter and hopefully...with fresh new fluid, that fixes the slipping issue. Thanks for watching 🙂
I noticed you cut the video of when you were rotating the pan and pulling it out. That white plastic piece keeps you from pulling the pan off. Surely you had some trouble with that. Why didn't share it? How did you get past that. I was never able to and it looks like you pipes are in the exact same place as mine. Just wondering.
My arm blocked the camera view completely as I was rotating the pan around so I cut that out so you wouldn't have to see my arm, sorry! Basically I slid the pan over toward the passenger side first, the lowered it what I could and rotated the front portion toward the driver side. Just go slow and it should come out. Hope this helps!
Thanks for the clarification. I was never able to remove the pan completely. I just cleaned everything in place. Awkward, but I got the job done. Thanks for doing the video. Gives the rest of us confidence to do the job and save some money.
Thank you for the information. Great video. Hope to see more.
Thanks for watching! 🤟
If i may ask what was the milage on your truck when you did this video? and have you had any problems with this 6L80 transmission to date? as they are prone to issues
I had about 92-93k miles on her at the time the video was made. I haven't had any issues to date. I have heard about bad torque converters and such but I guess I've been lucky thus far lol. Thanks for watching ☺️
Nice video. I have a 2020 Suburban 6speed. My trans stick level at 150f is right on the hot 2nd dot. I noticed yours in right on the "H" within the hash marks. Am I over full?
I think you're fine as long as you're not over the 2nd dot. Thanks for watching! 🙂
You are a pal.
You're a pal!
Good video! Do you think it’s necessary you have to change the filter gasket?
Thank you! Personally, I always change the filter gaskets even though they are a pain to replace. That gasket seals the unfiltered transmission fluid from the filtered fluid, so it's important to keep that seal tight, which is why I always change it out with the filter. Hope this helps, thanks for watching! 👍
What about the oil in the torque converter?
That will remain with the new fluid unfortunately. Another fluid drain would get more out of it though. A flush would totally clear it out. Thanks for watching! 👍
Is your truck a 2WD or 4WD and what engine does it have? The exhaust clearance issue some have experienced make me question what's different and is mine like yours?
Its a 4WD, you can see the transfer case
Love the video, specially how you show exactly what you are doing. how many miles did your truck have when you changed the oil? is this the first one you've done on the truck?
Thank you! The truck had around 92,000 miles when I did this and yes, this is the first time I've done it on the truck. It wasn't too bad with the fluid transfer pump, made it less messy lol. If you have any other questions feel free to ask. Thanks for watching and commenting! 🙂
@@TrickShiftGarage thank you for replying. Do you recommend doing one on a 2015 sierra at 129k miles?
Sure, you could do one at that mileage. You could check the fluid condition (and level) first to see if it's necessary. We have a video on how to do it here:
ruclips.net/video/b2Fugi0o2ko/видео.html
Basically if the fluid is brown or black with little to no amount of red tint, it's time to change it. If the fluid is mostly red still you have some time. Hope this helps!
@@TrickShiftGarage awesome!! thank you. i appreciate it!
You're welcome 😁
Is it possible to do without a pump?
Nice Job, very informative and to the point! 🤝
Does it work the same on 2009 silverados?
I don't think it does as that truck uses an older platform so the layout is different. Thanks for watching! 👍
My 2014 silverado jerking at stops u think its the fluids ?
Yes, it could be your transmission fluid level is low or the condition of the fluid is bad. We have a video walking you through this process here:
ruclips.net/video/b2Fugi0o2ko/видео.html
If it doesn't solve the jerking at stops than you should probably take it in to get diagnosed. Hope this helps and thanks for watching! 👍
@TrickShiftGarage what is happening is that when i drive is good when i co e to a complete stop and it's my turn to go i give it a bit gas and it takes a sec or 2 then it jumps into gear and it feels like someone bumped me in the back !!! Weird
@Gabriel-fq1ni im getting same thing, going to try this tomorrow, its like a hard shift
That wasn’t a missing bolt but the gasket tab?
Awesome vid man! Ty! 07 Escalade here and looking to do this soon. I noticed you just used drive on ramps to get under there?
Also? After you added the fluid, did you immediately back the truck off the ramps for fluid check? Or did you cycle the gears then back off the truck off the ramps? Im debating whether I can complete this with ramps only? Or do I need to jack up rear of truck as well and complete job as leveled as possible?
Is the fluid you used full Sythetic? Thank you!
Thanks man we appreciate it! Glad its been helpful for you!
Yes, I used just drive on ramps, those were bought at harbor freight lol. You shouldn't have to lift the rear of the truck to have access to the transmission pan, you should be able to get by with just the front ramps.
After, I added the recommended 6 quarts, I backed it up off the ramps and took for a test drive, being gentle with it because i suspected the fluid level might be low. Once I came back from driving it around, I cycled through all the gears, holding them for a few seconds each, then putting it back in park and the checking the fluid level. I was indeed low so put 2 more quarts in, cycles theough the gaers again, the checked the fluid level and it was finally at a good level. I think I lost 8 quarts due to the truck fluid draining from the torque converter when I let it set for a few days after using the fluid extractor. Either way, it's always a good starting point to put back in the same amount of fluid that drained out, but still always check the fluid level afterwards.
The fluid I used was AC Delco's Dexron VI which uses a synthetic based blend but either should work just fine, as long as it meets GM's specifications to be licensed as "Dexron VI". There are better fluid (Amsoil, Valvoline...etc) that use full synthetic formula, its really just up to you and your budget. Hope this helps, if you have any more questions just let us know! Good luck! 👍
Thanks for the feedback! I have the same HF ramps ! Where did you get that clear fluid measuring bin from! Awesome to own one!
Haha, nice! HF has some good stuff. I actually got the clear container off Amazon lol, here's the link for it 😉
amzn.to/45C6B9u
Appreciate that share! Hey, when you removed the old transmission filter gasket, were there some knicks left on the mating surface after the removal? Thank you!
No, there wasn't any knicks, just make sure to be very careful and gentle not to gouge or carve the aluminum (i.e. whole chunks are missing) or the seal won't seal properly.
If you lightly scratched or scuffed the surface, it should be fine and still hold. I know taking that seal out was a bit sketchy but sometimes you have to work with the tools you got and make the best of the situation. Make sure to clean up the surface area with brake cleaner on a rag and just wipe it all clean. 😊
Sure seems like there should be heat shielding between the exhaust and transmission pan.
How are you how you doing I like your work I would like to ask you a question
I'm doing well, thanks for asking. What's going on? 🙂
Great JOB, you did an awesome step by step breakdown, I got to tackle mine now
Thanks, appreciate the kind words. If you have any questions please let us know. Good luck and thanks for watching and commenting! 👍
Excellent video thanks
You're welcome, thanks for watching! 🙂
I'd put jack stands under the front chassis for safety in case the worse happens as well as put the same amount of fluid you took out
Good call, doesn't hurt to have just in case. Thanks for watching and commenting! 🙂
@TrickShiftGarage actually, I realized you already figured you needed all 8 qts because the torque converter carries some too, but a good rule of thumb is to always replace what you took out. Thanks for the great video sir!!
What about the rest of the old fluid
It's still in there. You can always drain the fluid again to get more of the old fluid out. If you want all the fluid replaced a flush is needed. Thanks for watching! 🙂
I been doing this for the past 4 hrs. Still haven’t got it out….
i dont understand what hassle you saved with the fluid transfer thing
Yeahhh, looking back, it wasn't worth the hassle lol. Thanks for watching! 👍
@TrickShiftGarage thanks for the video, just ordered my filter and oil, glad you didn't have to manipulate the exhaust 😂
Me neither lol. It's a mixed bag of guys saying they have to move the exhaust and others not having to. Hopefully yours treats you well 🙂
@TrickShiftGarage that's what my friend told me also. Thanks again dog
You're welcome bro!
Great video but I’m shocked you went back with AC Delco transmission fluid. Most people use Mobile 1 Synthetic LV ATF HP (Blue Label). It eliminates all the shudder, vibration and hard shifts most of these transmissions have.
Thank you! I wanted to make this video serve as a general reference so went with the factory fluid. I haven't had any shudders or hard shifts, so was fine with using AC Delco.
However, I will definitely use a better quality fluid going forward like Mobil 1 or maybe Amsoil or Valvoline. Thank you for your suggestion, greatly appreciate it. 👍
Amsoil
Amsoil is what I'm leaning towards 😉
After watching Project Farm do comparisons it’s a hard pass on Amsoil for me
Muy bien explicado no busquen mas videos
Great video !!
Lol so.many videos of people prying down on the exhaust with ratchet straps. Never a good idea. Great video.
Dropping the pan was not as simple as shown in the video. No mater what angle I turned the pan after taking the heat shield off it would not clear the internal components of the transmission nor the exhaust. I had no other choice but to remove the two 15mm bolts connecting my 4x4 transfer case to the crossmember and jacking it and my transmission up 1-1.5 inches up while at the same time using my neighbors bottle jack, a couple of 4x4 pieces of lumber and a heavy duty ratchet strap I pulled the exhaust 1/4-3/4 of an inch down too get the pan to properly clear and come out.
3-3-1/2 hours later I was able to finish the job but not without gaining a few more gray hairs that I don’t want at my tender age of 33.
As a warning to others looking to give this a try it’s a going to be a hit or miss if this will work or not and I recommend having a few extra tools laying around because once you get started your committed till the end.
Good luck, I hope it works better for you then it did for me.
Your truck has way more clearance between pan and exhaust that mine. I still have to use a strap and drop it a half inch
Ah ok, thanks for letting us know, I'm still not sure why some trucks can and others can't but I'll keep searching. Thanks for watching and commenting! 🙂
If you have a 2017 Silverado, it won't be this easy. There's not enough clearance to remove the pan. Need to drop the exhaust or just take it into the dealership. I was able to replace the filter and most of the fluid, but didn't clean it as planned. I could not remove the pan despite hours of trying every which way. It was getting dark so put it back together.
How come all the videos I've seen this is the only one where the pan came right out????????
I'm not sure. It did take some jiggling and turning in order to clear the exhaust pipe. I think removing the heat shield on the passenger side helps some by allowing the pan to slide to that side before rotating toward the driver side. That's what worked for me. Thanks for watching! 🙂
@@TrickShiftGarage one guy put a ratchet strap on the C.Converter to kind of cause that exhaust pipe to have a little more clearance not sure if it was on the Sierra or Silverado. But thanks for the great video. liked and subscribed....
Love the video, but I think I am probably the only person who has a complaint. 2015 Chevy Silverado 1500. Removing the pan is simple up until you try and shimmy the cover off. Maybe a different type of exhaust system it looks the same but the clearance is not because I can't for the life of me get the cover on as it is snagging on that corner device that youre clearlyy shimmying around in the video. There seems to be a 1/4" difference. Did you drop the exhaust pipes at all?
No exhaust modification, it's all stock. It really is a mixed bag, some are able to work it out and some can't. Either way, hope you can get yours out. Thanks for watching! 👍