do this nonsense challenge with these ridiculous rules like V10 offroad hatchback but u must -15 quality slider on everytin or summit liek stoop9d. jk, do whatever you like. when it's something you have come up with yourself it comes out better! Suggestions aren't bad, but js, I've seen a ridiculous amount posted in comments here recently and some of them I'm like wtf how did you come up with that and why haha. keep it up! I'm playing Automation rn. All the best! Grant.
Love the vid but you got it backwards, larger stroke means more torque, less means more rpm. F1 cars have barley any stroke and large bores and spin ridiculously fast. Diesel trucks have massive stroke and nearly no rpm but the torque to tow a whole bunch.
"Octane not being used" doesn't mean that you need to turn down fuel mixture. It means you can increase the compression or ignition timing and get even more power, come on!
BO. SO. zo-COO. Now i would like to see a VIP Bippu style car on your Channel. Big body sedan, v8, 2 tone bottom/top paint, extreme body kit, big face deep wheels, with a bunch of chrome accents and dragging frame on flat ground. fitment is key with this style. Ultra Luxury 90's style. Most commonly used cars are Lexus Ls400's, Lexus gs300's, Toyota Crown's, Toyota Celsior's etc. any big body sedan would work. And i would love to see your take on something along those lines! Keep up the good work brotha
Not sure if you guys have the game but making drift cars in this and getting them to work without a wheel is a nightmare. even with a wheel cars tend to snap and spin out way too much. Only drift cars i managed to make were all AWD with a super low bias to the front just so you can hold more then 25degrees of angle without spinning out. Also I got the most luck with leaf suspension in the rear.
I realized that I don't like your videos so much as doing whatever you set out to do in them but for myself. I always come back a few times to figure out how you did stuff but I really love these as starting off points for builds on my own. And you almost got me to buy the supporter pack with the v16 but at least today I figured I could get by with only 12.
Technically a ‘Kaido Racer’, bosozoku is technically the biker gangs that are often mistaken as these cars, which originated more from Super Silhouette race cars of the 80s, where the people who went to watch the race decided to turn up with their cars looking as similar to the cars on the track as possible. Awesome video though!
I know I'm tardy to the party, but this style of cars is called kaido racers. Other car cultures are kyusha and shakotan. Bosozoku style is specifically for bikes. Bosozoku were Japanese veterans who formed gangs, similar to American biker gangs
Interesting that many years ago ... I drew a car that looked a lot like this when i was first learning about drawing cars ... In recent years i went back to it and added more details to the car and background... Finds out there's a whole car culture around this type of car.... It basically looks like this without the decals, hood pieces, the bumper is held on with wires and has big jet engines on the back. Funny to me...
I tried making drift cars and I recommend you try an AWD setup with around 20% power to the front to stop you spinning out. Also for rear suspension try leaf springs I had the most luck with them. Its also better to get a big engine with low power but a smooth power curve, 300hp is plenty to drift (depends on weight). and keep the tires maximum 240-260mm or the car will snap over-steer like crazy.
A word of advice: In my opinion the easiest cars to drift are German RWD cars like the I series, K series, or maybe the 800. I even made one in automation with a V8 and it drifts easily (even with a game pad!). Just try to hold a slide in an open area like grid small pure and keep trying!
If you don’t clutch kick to start a drift at speed then you’re missing out. More controllable because instead of locking the wheels to loose the rear end it gives it a jab of power. Then you can just stay modulating the throttle as you drift.
Manual locker diff is more for old school off-roading. When it comes to drifting an LSD is much more preferred. However I am not entirely sure which type of LSD.
Decrease the displacement of the V16 down to 2 liters with short stroke and average bore. Make it a high rpm engine and that should help it not spin the tires as bad.
Would be cool if you tried to build a Group 5 racecar. They look kinda similar to bosozoku cars but they're racecars. Basically high reving, gigantic turbo lag 600-800hp deathtraps from the late 70's.
i helped a youtuber for a drifitng tutorial with automation cars in beam. it still is a pain in the ass, it can be done with some skill and tuning knowlage in automation. i actually have a video or two of it , but im not here to show off myself, i dont care about my youtube. thing is, it needed probably sports tires, less camber in the back, way less, front camber could have worked and then really feather the trottle , it could work pretty nicely. reason why drifting autoamtion cars in beam is so stupidly hard is mostly because of the steering angle, pretty sure people have noticed the drift cars in beam have insane steering angle on top of the regular ones
@@haninditohaidarsatrio7393 this guy has proven that you can be better than the experienced players. So if you find yourself playing the game and just say "I'm already doing better than that youtuber..." then it's normal.
@@emerycottle3166 no you are still right, but the main problem is how he missed a lot of power because his compression is off. But yeah, less stroke = more RPM. More stroke = more torque.
Oh my God he put a Japanese flag on his car demonetized his whole entire Channel JK in all seriousness now would really like to see you make it back to the Future DeLorean would be cool to see your take on it you have interesting artistic design ascetic
short stroke = less torque, not more. Not using your octane on a crazy car means more compression. Who the hell designs a 5.5 liter V16 and makes it run lean?
I e gotten so lost on the car builds, like I dont know what's going on with the auto flux games anymore, i just wanna see a brodozer 3.0 with like a v16 or something
@@automotiveflux oh I didnt realize that, take your time on them, I'd rather see you enjoying yourself making videos then forcing yourself to make content
The more carburetors the better
Speed
Jackson Duff Speed
@@theplayer12312 very much speed
you play my summer car yes?
do this nonsense challenge with these ridiculous rules like V10 offroad hatchback but u must -15 quality slider on everytin or summit liek stoop9d.
jk, do whatever you like. when it's something you have come up with yourself it comes out better! Suggestions aren't bad, but js, I've seen a ridiculous amount posted in comments here recently and some of them I'm like wtf how did you come up with that and why haha.
keep it up! I'm playing Automation rn.
All the best!
Grant.
Love the vid but you got it backwards, larger stroke means more torque, less means more rpm. F1 cars have barley any stroke and large bores and spin ridiculously fast. Diesel trucks have massive stroke and nearly no rpm but the torque to tow a whole bunch.
I realized that in editing, even after all this time I still make that mistake lol
Strokin!
Most of the torque on an F1 car comes from the turbo hybrid system
@@sneakysnake7695 new f1 cars definitely. Classic ones are all engine and really needed the rev range
"Octane not being used" doesn't mean that you need to turn down fuel mixture. It means you can increase the compression or ignition timing and get even more power, come on!
But the lower the ignition timing, the more cracks and pops the exaust makes! (I think)
Juan Ordóñez Galbán close but wrong direction. If you have ignition after tdc then combustion will still be happening as the exhaust valve opens
For someone who plays automation a lot more than me, you would think he would also know a lot more than me.
BO. SO. zo-COO. Now i would like to see a VIP Bippu style car on your Channel. Big body sedan, v8, 2 tone bottom/top paint, extreme body kit, big face deep wheels, with a bunch of chrome accents and dragging frame on flat ground. fitment is key with this style. Ultra Luxury 90's style. Most commonly used cars are Lexus Ls400's, Lexus gs300's, Toyota Crown's, Toyota Celsior's etc. any big body sedan would work. And i would love to see your take on something along those lines! Keep up the good work brotha
Thank you you now how to say it
You know, this channel deserves more subs for the effort you're putting in the videos
automotiveflux: ok lets try to overheat the car
the car: no radiator no problems.
I'm suggesting just like some Australian car and go for all the stereotypes 😂👍🇦🇺
P.s love the content keep it up 💪
Or maybe an American car...
@@omega1575 he has made plenty already smh
Australian car, so just like an suv thats upsidedown
The Maloo, the sandman?
A Ute with an 8L pushrotz V8 and insane performance
I have idea : make most safety and cheap in repairs in world.
Made a 11k sell price scout 800 the other day with 150hp.
Pretty fun to drive.
Me an automation nerd: sees you put forged internals on a 3litre v16.
Also me: "bro, the game cant reach 30 thousand rpm."
lol
Literally right after I learned how to drift in the 200BX
Can you make a regular grocery-getter version of this car please?
Boso cars usually use 13" wheels, with little crappy tires stretched on to 13x11ish
14””
@@Damijet definitely not 15s, 13s are accurate
@@mihailsgelmels478 give us a link with one on 13's
@@Damijet they use 12” -14 in including 13”
15 and over is technically too big to the standards of them
Probably less camber on that car would help with drifting, since you'll get some more grip when you're finishing the drift
Isnt that why they jave camber in the freont with regular in the back
Not sure if you guys have the game but making drift cars in this and getting them to work without a wheel is a nightmare. even with a wheel cars tend to snap and spin out way too much. Only drift cars i managed to make were all AWD with a super low bias to the front just so you can hold more then 25degrees of angle without spinning out. Also I got the most luck with leaf suspension in the rear.
I realized that I don't like your videos so much as doing whatever you set out to do in them but for myself. I always come back a few times to figure out how you did stuff but I really love these as starting off points for builds on my own. And you almost got me to buy the supporter pack with the v16 but at least today I figured I could get by with only 12.
"oh good we can put in a 5L V16"
I don't think good is the word I would use to describe that idea
16 carburetors for the win!
Idea, flattest torque curve possible
Easy, f up the fuel mixture and compression and exhaust, (literally everything) and it would just say 0 across the chart.
Not really a challenge.
Small turbo tuned for boost with a low BOV
Hold your buff horses, baba.
Bosozoku literally mean "Violent Running Tribe"
Hello fellow donut media watcher
#MoPowahBabeh
Aka thunder tribe
Technically a ‘Kaido Racer’, bosozoku is technically the biker gangs that are often mistaken as these cars, which originated more from Super Silhouette race cars of the 80s, where the people who went to watch the race decided to turn up with their cars looking as similar to the cars on the track as possible. Awesome video though!
one of the nicest looking one imo
automation said we will not have another 5 decker bus
edit: what does this thing look like through a digital wind tunnel
I know I'm tardy to the party, but this style of cars is called kaido racers. Other car cultures are kyusha and shakotan. Bosozoku style is specifically for bikes. Bosozoku were Japanese veterans who formed gangs, similar to American biker gangs
Bosozoku fan showcase? That would be one dope showcase
Good so when it rains the water goes straight in the motor and it will make a great yard ornament
Interesting that many years ago ... I drew a car that looked a lot like this when i was first learning about drawing cars ... In recent years i went back to it and added more details to the car and background...
Finds out there's a whole car culture around this type of car....
It basically looks like this without the decals, hood pieces, the bumper is held on with wires and has big jet engines on the back.
Funny to me...
You should do a bosozoku showcase
I tried making drift cars and I recommend you try an AWD setup with around 20% power to the front to stop you spinning out. Also for rear suspension try leaf springs I had the most luck with them. Its also better to get a big engine with low power but a smooth power curve, 300hp is plenty to drift (depends on weight). and keep the tires maximum 240-260mm or the car will snap over-steer like crazy.
A word of advice: In my opinion the easiest cars to drift are German RWD cars like the I series, K series, or maybe the 800. I even made one in automation with a V8 and it drifts easily (even with a game pad!). Just try to hold a slide in an open area like grid small pure and keep trying!
Lol my 94 dodge 1500 drifts fine 😂 what're you talking about.
if this helps, its pronounced bo-so-zo-ku
8:00 shinyodd
Nope, just some guy who tried putting a small bus on top of their rice mobile.
Dont you compare shinyodd to this guy.
I got the game 2 days ago and made a 800cc v12 that has 200kw and 12000rpm with almost no problems
Yeah but I bet the engine costs more than a new ford fiesta.
Hardly a challenge when you bump the quality to max.
If you don’t clutch kick to start a drift at speed then you’re missing out. More controllable because instead of locking the wheels to loose the rear end it gives it a jab of power. Then you can just stay modulating the throttle as you drift.
Love how it looks like something from gta5
Manual locker diff is more for old school off-roading. When it comes to drifting an LSD is much more preferred. However I am not entirely sure which type of LSD.
Video picture : says 8 carburetors and 16 intakes
me: damn son how did you find this
This car is looking sick!
That V16 is just a fucking airplane engine
You definitely deserve more subs
Less*
Its not rice,its a masterpiece
Make a car to hotlap the ultimate low-speed handling circuit. Monaco.
Bōsōzoku Bugo?
Decrease the displacement of the V16 down to 2 liters with short stroke and average bore. Make it a high rpm engine and that should help it not spin the tires as bad.
You can change the tyre pressure in Beam and it's very handy for balance.
Would be cool if you tried to build a Group 5 racecar. They look kinda similar to bosozoku cars but they're racecars. Basically high reving, gigantic turbo lag 600-800hp deathtraps from the late 70's.
What about a rino BIG R ?
where the hell do you get your bodies from?
oh! great Yankee car!😆
夜露死苦！（よろしく！）（Nice to meet you!）
just realized you sound nearly like Bladed Angel
lol
*MO PWAH BABEH*
Bōzōku is basically ricers on an infinite budget and on cocain
Make ahh ..... Interior crocodile alligator, I drive a Chevrolet movie theater (look up the song )
It's an oldie but a goldie
When its 2020 and people still can't structure a joke properly.
Did he already do a Honda Civic "tuning" knockoff?
i helped a youtuber for a drifitng tutorial with automation cars in beam. it still is a pain in the ass, it can be done with some skill and tuning knowlage in automation. i actually have a video or two of it , but im not here to show off myself, i dont care about my youtube. thing is, it needed probably sports tires, less camber in the back, way less, front camber could have worked and then really feather the trottle , it could work pretty nicely. reason why drifting autoamtion cars in beam is so stupidly hard is mostly because of the steering angle, pretty sure people have noticed the drift cars in beam have insane steering angle on top of the regular ones
Interesting stuff!
Looks good
You can't convince me that Bosoku wasn't supposed to look fucking dumb on purpose.
*E V E R S O S L I G H T L Y*
Bo-so-zo-ku
Where can I get this games? Especially Automation
Love it
Steam
@@automotiveflux Thank you for the answer :)
@@haninditohaidarsatrio7393 this guy has proven that you can be better than the experienced players.
So if you find yourself playing the game and just say "I'm already doing better than that youtuber..." then it's normal.
Bo-so-zu-ku
Bo~so~zu-ku or more accurately Bou-sou-zu-ku
i call those cars shin spliters
Can you build a high rew v8 formula next
Less stroke ≠ more torque. More stroke = more torque.
Most of the time
@@emerycottle3166 no you are still right, but the main problem is how he missed a lot of power because his compression is off.
But yeah, less stroke = more RPM.
More stroke = more torque.
You should try to make a WRC spec car!
How did you get the super gt kit
Artjom Kolesnikov By downloading mods from the workshop
What is it called
Artjom Kolesnikov I don’t know, i dont have Automation
Lmao then why are you replying if you dont even know anything about the game
Artjom Kolesnikov You can find the Automation workshop on Steam.
Imagen one of the carbs going bad. That's it. You just need to make a new engine at that point lol.
Oh my God he put a Japanese flag on his car demonetized his whole entire Channel
JK in all seriousness now would really like to see you make it back to the Future DeLorean would be cool to see your take on it you have interesting artistic design ascetic
400 kg of downforce front and back is probably why your top speed is lower. At least I think I remember Killrob saying that is accounted for.
Build an early 2000’s mini truck slammed on the ground but lots of horse power
Can't find the original build :(
It's in the "Building based on RUclips comments" video
@@automotiveflux Ah, thank you very much!! :D
3:50 he said 5.5L v8 (its a v16)
do a devel sixteen mod and make it red and black and make it a TRACK MONSTER! with as much turbo as possible
Do an artic snow DOMINATER!!!
Imagine having to tune those carbs 💀💀
You forgot the truck nuts
you should make one that's purple and gold
28:21 Oh god
Wait till you see shinyodd's streams good sir...
Bow-so-socc-you is how its pronounced you i belive
This car is normal compared to what shinyodd makes
I should just get automation and submit my own car at this point?
Subscriber battle?
There are challenges going on all the time on my Discord, always someone willing to battle
Make a 500hp twin turbo Prius
WAAAAAAH!
Haha Carbs go Brrrrrrrrrrrrrrrrr
What kind of carbs you been running?
Might have to go check them out.
Looks terribly lot like the hooniganfrom the front. Just gotta make it green and black
Waych figureights Bosozoko gta builds and thats how you pronounce it
A car to surpass metal gear
Yeah I feel bad for that transmission and diff too.
Imnot even sure if it would be possible to have your actual engine popping out thru the bonnet - the game will just say it is too big for the bay
short stroke = less torque, not more. Not using your octane on a crazy car means more compression. Who the hell designs a 5.5 liter V16 and makes it run lean?
He's not the best at this game to be honest even though this seems to be the only game he plays.
yes
Bo-so-zo-koo
The pronunciation is: boss-oh-zok-ooo
COOL
Does anyone know what this game is?
No idea
Its Automation when He drive the cars He convert es the cars He made to Mods to use in beamng drive
Group B?
I am 420eth and that makes it funny right?
the 20 in 420 already makes the "e" sound (sorry if im being intrusive)
The style of these cars is named "grachan".
Bosozoku is a subculture name.
Other way around, Grachan is a bōsōzoku style
Yeah, bososoku is the style of these cars, and grachan is the subculture
When ur so early ur almost not early
I e gotten so lost on the car builds, like I dont know what's going on with the auto flux games anymore, i just wanna see a brodozer 3.0 with like a v16 or something
The games stuff stopped a while ago unfortunately, not sure when I'll do another one
@@automotiveflux was it due to Covid?
@@automotiveflux oh I didnt realize that, take your time on them, I'd rather see you enjoying yourself making videos then forcing yourself to make content
BO SO ZO KU