If you need to splice steel cables, check out this simple hack! #tipsandhacks #tipsandtricks #youtubeshorts #shorts #constructionhacks #constructiontips
Consider the tip for when you don't have the correct connectors on hand. I believe that it is much easier for you to have nuts and bolts at home than steel cable connectors. Thanks for watching.
This costs more money, more time and more resources to accomplish, if you’re going to get all this stuff from the store go ahead and get the connectors and do it the right way
that's a brake cable or gear cable for bicycles that sucks you can buy a new one that wouldn't fit through the sound cable cover anyway you buy a new one if it snaps that's nonsense
Kkkkkk. Faaaala, Fabio... Encare a dica como conhecimento, apenas. Não é sempre que temos os dispositivos ideais para executar um serviço, então aí vem as "gambiarras"... Abraço e obrigado por ter assistido!
That's one of the objectively worst ways to butt join two wires. The best way is a wire splice. The second best is a poured socket, then a couple of swaged collars (eg Talurit) then a pair of high quality (asymmetric) cable clamps, then two common cable clamps. Then come a whole variety of halfassed, "shade tree", poorly conceived and amateurishly faired botches like this one.
You could also just pick up a cable clamp from the hardware and do it.
Yes, Jason. However the tip is to join the steel cables when you don't have the correct connectors.
Thanks for watching.
🤦♂️🤦♂️🤦♂️
😟 😕 🙁
Haha what the fuxk these are getting out of hand
kkkkkk... don't be mean, Nicky...
Thanks for watching!
Se essa é a mais simples, não quero nem ver a mais complicada!!!!!😂😂😂😂
Kkkkkkk. Então deixa eu corrigir, Gustavo: TALVEZ a dica mais barata...
Abraço!
It's the worst way to connect cable. Just take 5% copper welding rod and mapp gas then weld it together. Thats way save you money and time...
Perfect. However, the video shows a tip that you can use in a situation where you don't have the ideal resources.
Thanks for watching.
@@brestore its not usable, half a day to do that thing and after 3 days u will throw it to trash because all this will be in rust.
👍🤛
Imagina a mais complexa
I was interested until the tips touched, I'm out
Ok.
Thanks for watching!
God that's so awful and ugly too.
kkkkkk.
Thanks for watching, David...
Jesus Christ 😂 show these people the correct way since we gotta go to the store to get allthread and hex nuts
Consider the tip for when you don't have the correct connectors on hand. I believe that it is much easier for you to have nuts and bolts at home than steel cable connectors.
Thanks for watching.
@@brestore when you don’t have the correct connectors you go and get the correct connectors
This costs more money, more time and more resources to accomplish, if you’re going to get all this stuff from the store go ahead and get the connectors and do it the right way
Ok. Thanks for watching.
Ok. Thanks for watching.
А ниче что это не кабель А трос
Ok.
Спасибо за просмотр.
that's a brake cable or gear cable for bicycles that sucks you can buy a new one that wouldn't fit through the sound cable cover anyway you buy a new one if it snaps that's nonsense
Ok.
Thanks for watching!
Simples demais 😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅
Kkkkkk. Faaaala, Fabio... Encare a dica como conhecimento, apenas. Não é sempre que temos os dispositivos ideais para executar um serviço, então aí vem as "gambiarras"...
Abraço e obrigado por ter assistido!
Ка́белей???
?????
Болт в районе 10р гайки в районе 5р. Специальное алюминиевый хамутик - 5р!!!
Привет MrNoni. Я ценю ваш комментарий. Однако совет предназначен для ситуации, когда у вас нет правильных разъемов.
Спасибо за просмотр.
Top!
🤗🤗🤗 Valeu!
Đi mua mẹ day mới đi cha
Cảm ơn đã xem!
Какое напряжение? Герметиком обмотай
Извини. Я не понимаю Ваш вопрос.
@@brestore обычный узел и в трубку, обжал, пользуйся. Даже термоусадки хватает для 3мм
Спасибо.
у меня глаза лопнули от этой вакханалии
Kkkkkkk... Прости, но я не понимаю!
Спасибо за просмотр!
Быстрей и надёжней запчасти сплесень!
Спасибо за просмотр, Ahtoh!
Быстрее переплести...
Спасибо за просмотр!
Матвеев срочно проверить
Спасибо за просмотр, Ivan!
Уже проверял. В этом видео улучшение от доктора😅
Спасибо за просмотр!
That's one of the objectively worst ways to butt join two wires. The best way is a wire splice. The second best is a poured socket, then a couple of swaged collars (eg Talurit) then a pair of high quality (asymmetric) cable clamps, then two common cable clamps. Then come a whole variety of halfassed, "shade tree", poorly conceived and amateurishly faired botches like this one.
Ok.
Thanks for watching.
There is no way its gonna break 😂😂😂😂😂
Yes, Nick!!!
Thanks for watching!
Чувак, это называется трос
Привет, друг! Спасибо за информацию. Я буду исследовать об этом. Для меня (tether) это криптовалюта...
Спасибо за просмотр!
А че так гиморно, в крепеже в продаже есть надежные скреплялки таких тонких тросиков, стоимость двести рублей за ведро😮😮😮😮😮😮
Привет Фелекс!
Совет для тех случаев, когда у вас нет доступных разъемов.
Спасибо за просмотр!