Welding Structural Columns in the Field! (How To)
HTML-код
- Опубликовано: 21 июл 2022
- #welding #howto #weldingtips If your gonna be a welder, your going to build columns at some point. So I figure I’d put this video out explaining the best way I know to go about it without all the fancy tools.
Here’s my Instagram- / meltinmetalmobile
Here’s some tools I used-
Neck Protecter- amzn.to/3zicvz2
Welding Hat-amzn.to/3ow3BI1
Fire Ball Tool Square- fireballtool.com/products/min... 
Развлечения
On your base plate layout, if you don't have a tape measure, you can simply run a line from corner to corner creating an "X" on the plate. Then set your square tubing corners on the lines of the "X".
That's also a quicker way to find center of a plate that you know is square or rectangular without measuring.
Thats gotta be the most time consuming way to attach baseplates just sqaure 2 lines off the plate centre for top and side of the box section clamp a piece of angle to the top line and drop it on done
Exactly
Keep doing it brother! Not many people have the balls to start a business
Glad to see you home
Great job Anthony !
Great video. great tips and advice all ways enjoy them and all ways some think new learned.big respect to you 👍👍
I’ve been welding on and off for all most 40 years!! Your videos are great and I like how you show your welds and just come right out and say,, That is a bad weld I just made and say why!… I’m very old school kind of welder and real don’t say.. I made a bad weld.. Just fix it like it never happened.. Thanks for showing that it happened.
Yo Anthony, great to see ya.......hope the Montana work is coming along.....cheers, Paul
thanks Paul!
Again always learning thanks
You bet!
Nice! I have some fireball squares as well. Awesome stuff.
Our boy is getting some sponsorship love finally, so proud 👏
good shit man that torch cut is better than pretty much everything i see at work (including my own cuts haha)
I also love my minion squares and monster squares for fabing almost anything, works great making beams and columns and knowing your shit is square without fucking around
Great video man, keep going!!🇺🇸
Useful info and vid thank you for making it
Cheers from Nova Scotia
Nice video as always man I build lots of columns at the shop I think I need some of those fire ball squares.
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire. We use this at work to weld columns as its faster than stick, however the tensile strength is greater with stick than the wire.
Finally, someone that knows what there talking about
Good video budrow!!! I like that welders cold snack sitting on your welder @ 6:19…keeps the lines straight !!!
Way to give your buddy credit for being the better welder. With that attitude, you'll quickly be the better welder.
Bro about time been waiting for him to post
Good evening everyone. Great vid brother. Vary informative.
Thanks 👍
Fireball makes some great stuff. I bet their bigger squares would work better for the heavier steel. I rarely use the small minion square. Just not enough surface area.
Love it man
Digging the sponsors 🙏🫡
That old Miller is a great machine, just needs to be dialed in and of course more cfh. Also, it looks like contact tip is too short-it needs to be even with nozzle or back a hair. I have had to cut nozzles back more than once. Get a 15ft. gun-if it doesn't have one and play with the settings. Turn both heat and ws knobs to 3/4 then put 1 hand on ws while pulling trigger with other and start listening/adjusting speed till it sizzles.
A section of angle iron works nice for the base plates if you don’t have a square
Good stuff.
Right on man just making that money 💰💰💰
Stick for the win!
"It helps to know that". I can Respect that. 👍
Ayyye welcome back
thanks brother!
Thumbs up for Fireball Tool. He's got a good RUclips channel too.
💯
Nice job.
Thanks!
When l do columns l take off all the mill scale in the weld area, Dychem and scribe the lines. Hold the plate flush with one hand and line up and tack it on. Then, weld out opposite sides and move on to the next column.
Interesting to see how you do yours young man!
Need to run a drop from your 220 in your laundry room if its fairly close. Gas is too expensive right now!
Luckily mine backs up to my garage so I just popped a hole through and made a cap in cad and 3d printed it.
Anthony, you’re getting porosity because 15cfm is only half of the minimum that you should be running. In breezy conditions, I’ll crank mine up to 40cfm with hard wire and as high as 60 with dual-shield.
Why would you use more gas with Dual Shield :/?
Can’t you also get problems from having too much gas, I know there’s a lot of variables. But running dual shield out of my garage I only run 25-30! I’ll have to try cranking it up next time at the shop
It depends on how hot you're running and how long it takes the puddle to cool. When I did structural 50 to 60 or even higher was the norm. Of course, we did 1/16 dual shield and .052 metalcored. Short arc really isn't appropriate for structural anyway.
it was 100% the wind
I agree 15 cfm to low to be next to an open door .. 30 to 35 is more the proper range .. can turn down to save gas if doors are closed and no fans running hope this helps
I use eagle arc 719 dual shield for welding structural steel. It is more expensive than stick welding but a lot faster and just as reliable. I have never been able to fully trust my bare wire mig welding in structural welding applications but dual shield is like stick welding if you lay in a good solid bead you can count on it.
Stick welding just so much fun ta do. And never gotta shield
good job
Thanks
if you like doing flat just get some 90/10 and do spray transfer its slick, need 30+ cfh
FIREBALL TOOLS SQUARES💯💪🏾
short circuit mig doesn’t like the heavy mill scale on thicker base plates. i would definitely grind that off before your layout. inspectors in california didn’t like us using mig for that anyways so we ran t8 flux core.
spot on, most of the work in florida can be done with t11 (no wind worries and vs feeder) i worked in california post northridge and ran t8 when it was spec'd. didn't like it as much as t11 but it has it's place.
A little naughty trick my boss taught me to hide porosity which u probably shouldnt be doing is to keep ur voltage the same but judt turn ur wire speed down quite alot and weld over the porosity or pinholes. That way it wont build up the weld anymore than it is itll instead just fill in them aero bubbles
MM77 Approved 👍🏼👍🏼
Right on!
How you doing Anthony hope you having a good day great video
Same to you
for close-ups, have you tried pulling your camera further away from the object and zooming in the lens?
if extra strength is required I would bevel the outside edge on square tube for more surface area and then run two more passes...some triangle supports too if needed...
I agree! 🤝
triangle supports? gussets? no need to bevel that tube. it's only 1/4 inch wall.
Do you mess with any Tig on pipe? Love the vids keep ‘‘em up bro 👍
1’ 1/4 angle works as well 🤙🥵
the column master himself! how are ya brother
Nice. Do you recommend a second pass on those welds? Just wondering because it was some thick steel.
I like to use white out my guy. It doesn’t fade as quick as sharpie, you should try it out. The white out pens on Amazon work perfect.
good tip
You can also use the torch with just acetylene on low, put it on steel and that black soot goes away at 250°
Erik, buy yourself some soapstone. you can sharpen it with just about anything. they have it at harbor freight. it is universally used by guys doing metal fabrication, shop of field.
@@newage3397 I have used soapstone, it’s just easily erasable. I like white out but I think there both versatile tools in fab.
hi, i went to amazon to see if the world had changed since i last used a white marker. anything with a felt tip has not worked for me. the soapstone i buy by the gross , it's inexpensive, and i leave it all over so i never have to go looking. lol.
thanks for the reply.
Busy busy👊🤠🤑
More Montana videos!
Like too score the plate with cutting disc
That works great too!
get some gasless flux wire for the mig and just run a wire wheel over it. the ol cheap strong but dirty wire
Stop yelling at me 😭😂
Good work bud , take it easy!
Hey Anthony what made you go into welding and how did you start??
Are you back in Florida? Looks like some Spanish moss in the background. Aaaaand, you need to post more homie! Also, I was 69th like.🤘🏼
hard to build a house and make vids! im still in mt this was a old video I just got around to edit it
i've never seen anyone use anything other than soapstone. (except on youtube) i have to take that back. erik uses the felt tipped steel markers and i have used them but i have also found that nothing with a felt tip lasts very long and if you happen to get the tip wet it's over. if they work for you then go for it. they are 7.00 dollars apiece and a stick of soapstone about a quarter.
Yo man what naics code did you use for mobile welding
Thanks for the video! What tool do you recommend for accurately cutting the tube to length in the field?
I just use a speed square and a grinder. I get the best results
How do I make porosity a profit or benefit instead of a liability? Rhetorical question
Here is a trick I learned to protect my toes. Cut half way from one side and then cut from the other side and finish the cut in the middle. It will always fall straight down.
I'd have to bevel that square tube per blue prints, you always measure off the holes of the base plate to center it.
no need to bevel anything here. what blue prints are you speaking of, i'll bet you there aren't any. no need to do it any differently than they are doing it. they will be setting anchors last unless you see some embeds that i don't.
I worked in a legit shop fitted/ welding on the line 1/16th metal core preheated base plates for 30 mins that weighed over 600 lbs to beams that weigh more then your vehicle. And installed/ certified to do so in the field to weld. Your thinking is invalid.
@@boatboy7418 sorry, you shop guys aren't that quick. they preheated that material due to the mass. did you shoot it to be sure it was at 250/300 F before welding. don't impress me with the metal core, i have run it. i have two VS feeders with rollers that go to .072 but most of what i do is with .062 fabshield 21b or .045 NR211MP. by the way, you do not certify to 'in the field' . you certify to an AWS spec. in your case it would be D1.1 3 or 4g 1 inch plate. aws does not care if you are in or out. good luck. PS. that test is 400 dollars and you have to recertify every six months; it cost 30 dollars, they just raised it, to do the recert. did you do all that at an accredited facility?
Thermo crayon for preheat. If you can run a beam line and angle machine etc. Cdl for getting steel to the job can run a crane truck don't come at me... I did it all even draft blueprints. Sorry forgot water jet and plasma table. And cryro manifolds of high pressure all xrayed in the past. All certs payed by employers and re certs. Well till you climb to the top and just manage.
@@boatboy7418 nice, i dropped the temp sticks for an IR gun. don't get hot but no one does it all. i wouldn't stop and look at foolish videos like this if i thought i knew it all. what amazes me is the number of people that think they do know it all and actually know very little.. sounds like your dug in deep so good luck.
How has that trailblazer been holding up?? I been thinking about getting one for structural jobs
Excellent, I would buy another
Loving the videos man. Question, since this is structural, is it coded? If it is did you decide the procedure or was it dictated by the plans?
No code on most welding jobs like this. I use my better judgement to determine the process
@Meltin Metal Anthony that's what I was thinking but I figured it wouldn't hurt to ask. Thanks for taking the time to respond your videos are awesome. 👌
Cup angle makes a huge difference with wind .. I’ve welded lots of outdoor tanks .. keep the cup close put a hand near it or something.. anything to break the wind a big
Hi Anthony I'm a pipe welder in LA. How would I go about finding side work? Just want to make an extra few dollars. I have a regular job so just trying to add a little to the pot.
Run an add on craigslist 5 bucks
Single pass on your structural stuff?
what helmet were your wearing?
im going to school for welding and right now im doing TIG overhead and I hate it I prefer stick welding
To bad you didn’t have any flux core wire
Nothing pisses me off more than getting porosity with dual shield bc unlike regular hardwire it’s so hard to tell if you’re getting it until you get done with the weld and you’re like “fuckkkk🤬” 😂😂
Never seen anyone mount their generator on the back like that. It's usually a compressor over there.
I appreciate you. Thank you for sharing your skills knowledge and experience
I'm about to be building 6 of these exactly how your doing. Customer also wants me to build footers to go into concrete also. Do you build those as well? And On your wire welding 15 cfm is alittle bit low IMO I typically run around 40+ unless I'm in a shop. give that a try next time and see how it does! Keep it up love you videos.
you do not build a footing. i guess you could but it makes more sense to build a form where your column will be and then do a pour. now, you have to know what the load is on that concrete determine the l x w x h. and if it needs any rebar or wire. remember F = P x A or factor through. if you do not know what that equation is then you need to rethink sizing footings and let someone else do it.
@@newage3397 the footing is really simple to build.. I do not know what formula or whatever your talking about, but I am going to make them and install them next week. It will be a form built and about 2 ft into ground. Thanks for your input
@@outlawwelding7505 thanks for proving my point. Why two feet? You have no idea why. Doesn't surprise me because anyone that follows this guy is either green or bored. . Have you calculated the volume of concrete you'll need into number of bags to buy. I doubt it. Let's see if it's 2x2x2 that's 8 cubic feet. Cured concrete ways 150 lbs per cu ft or app 1200 pounds. Allow 10 pct for shrinkage. Oh, any rebar or wire going in there? Just a thought. Good luck with the 'build'. Do yourself a favor and watch these videos with a degree of skepticism. You may be seeing an expert here but I am not and neither are several others. Go to the previous video of this job and make note of the remark by the lead guy. "Anthony likes to make videos". That is what is known as a tell.
I've been running a successful welding business 5 years and welding much longer. My customer has a pallet of concrete so I have no reason to calculate all that shit. There is 2 baseplates with 2 ft of allthread between them (welded) and 2 ft x 1.5 inch schedule 40 pipe welded to both baseplates. That will be in the concrete with all thread stubbed out and top baseplate exposed. I am not green or bored and I warranty all of my work and am very confident that is strong enough to hold a 9 ft column. I am using 8 column for an 9 ft tall lean to that is 40 ft in length and 8 ft from house. Not sure why your trying to challenge me.. I just asked a question to see what he uses to mount his columns to.
@@outlawwelding7505 'all that shit' lol. You warranty your work. How much liability you carrying? Thanks for that reply there are probably a couple of posters on here that will enjoy it.
"We'll adjust that with a hammer". Sounds about right😉
where can i get a fireball speed square
Fireball tools
What I would like to know is how you aquired that stair job? Whats the math thats involved? Lastly, did u consult with an engineer or architectect on the design of and layout of said stair? Thanks from a fellow metal sticker!!
don't use that stair as an example to mimic. structural detailer is going to have problems with it. did someone miss with the footing location? i have never run my stringers straight into the concrete that way.
Just asking why not 5/32 7018
😎👍
my mane
While cutting plate you should have burned out a 4 inch square for post to pass thru for condensation reasons. Also i nevet saw you check for square
Turn up the gas also I think your stick out was the wrong distance part of the bed sounded good the rest of it sounded like crap
Mark it in Sharpe scribe it then preheat till marker is gone cut it
Get some welding curtains to block the wind, and protect people from the arc rays. Like the pizza guy.
Those 250X’s are no shit. I love mine. It will run a bead to the moon and back and not bat an eye.
Name austin, just started my mobile fab buisness, and im having trouble getting work. Im handing out cards. Doing all the leg work i can. What am i missing?
Check my new video! You gotta build that customer base!
👍🤙🤘
0:10 No paint on the feet of those columns.
Try a 7024 next time jet rod for baseplate$
is it my imagination or is that first step about three inches lower than the second one. lol. that ain't going to fly anywhere but out in the middle of nowhere. i would delete the stair from the video and save the guy that is actually doing the work (i think MMA is only there to make a video) a potential problem. what's with the extra footings?
Idk if you tried but maybe increasing the cf/m of gas might help with the wind?
actually he meant cfh....and yes, 30 to 40 is what is recommended
ya you can, but I didn't want to chance cutting more weld out so trusty old 7018
Give it away
I get nervous when I see someone say "structural" and "easy" together.
Never push. Pull. Doesn't matter what you are running, mig, stick, tig, always pull. You want good penetration. If you hold your stinger at a 45 degrree angle and are pulling the proper speed your welds will always be decent. You must always get your work area setup proper though. Even underwater commercial welding has to do this, but so do regular welders, (I would say regular welders have to worry about it even more, due to wind. Use weld curtains, build you some cheap square frames with weld curtains tied to them so you can bring them with you to jobs, all it takes is 4 pieces of metal, welded together to make a box then take some plastic, or burlap, and ziptie it to the square. Put 2 legs on it (H) shaped sign with legs if you are looking from above, build 3 or 4 of them to make a box around your welding area so you don't have to fight the wind. Spend a bit more money and build them out of aluminum to make them lighter. But yeah, the wind will screw your welds up, but so will pushing and not pulling. You want good penetration, and for structural welds, I always overkill the welds if there is no blueprint.
This is just wrong you dont ever pull tig and some MIGs wont accept a drag angle either
IPM is set too high and a tad on the volts as well….. oh and 20 CFH
or wind maybe
Right
Wrong transfer modes to transfer. Short circuit get lack of fusion.
Change gas protection, there you can get spray arc... etc etc etc
As I shake my head in shame for the less fortunate.he said it's windy out.in his garage.try welding 20 floors up 20 degrees.perfect weld no bitchin it's called real life.
thats why I switched to stick pecker head 🤷♂️
that takes so much time just holding it up manually
this is the same building they were working on in another video. at the time i thought no way these guys pulled permits on the work they were doing. in florida, in a lot of the rural counties, there are lots of things done that would never pass inspection in the larger municipalities. try and do that in broward, wpb and so on and you will get tagged. of course they may have been permitted for that stair (very seriously doubt it) but i did notice that except for one quick flash there was nothing else in the video about it. so maybe the lead guy did not or the owner did not want it in the video. if you are an aspiring fabricator here is a bit of advice. get a set of plans that were accepted for a stair with platform and switchback and study them. learn about rise and run and the deviation allowed from one riser to the next. man, if those stringers don't look like some farmer did them nothing does.
Stairs take brains and experience. One of us old guys should make a video showing some of the "rules" for making stairs. Doesn't anyone know what a "Nose line" is?
I work indoors running .035 sold wire with 90/10 and I'm running 30 to 35 cfh. Is that too much? I make leak proof welds on a rotary all dang day..
I always run 15-20 in doors with good results 🤷♂️
@@MeltinMetalAnthony I'll try turning it down a little and see what happens.
Thanks for the response! Hope your new homestead is coming along.