Customer States & Mechanical Fails [Part 40]
HTML-код
- Опубликовано: 15 мар 2024
- Customer States & Mechanical Fails
Send us your videos/photos 👉 carhax-video-submission.com
In case you missed our last video, check it out 👉 • Customer States & Mech...
Credits:
/ nellandbando
/ conscious_garage_224
/ @tunedbyniuton
/ goat_m392
/ @davesautocentercenter...
/ normile1919
/ @film207tv
/ @poorpumpersociety
#mechanic #fails #customer #states
These videos are intended to be both educational and entertaining.
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years and I still use it)
s.click.aliexpress.com/e/basZfJg8
-22 pieces of a removal tool set
s.click.aliexpress.com/e/_d8Y...
-7 pieces of cheap removal tool set
s.click.aliexpress.com/e/c5FEA6Uo
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpress.com/e/cdIOzPBK
-Long Torx Screwdriver T15 T20 T25 T27 T30(use Torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpress.com/e/cDOzHHLw
Small Electric Drill Cordless Screwdriver:
s.click.aliexpress.com/e/iAkSGXm
Hooks:
s.click.aliexpress.com/e/bGDvRimM
Flexible Magnetic Pick-Up Tool:
s.click.aliexpress.com/e/btR4NInm
Rubber Eraser disk:
s.click.aliexpress.com/e/_Bf9...
(I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpress.com/e/CbIfLBK
Infrared Thermometer:
s.click.aliexpress.com/e/_d61...
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK. 
Авто/Мото
![MECHANICAL PROBLEMS COMPILATION - HOW TO STOP CATALYTIC CONVERTER THEFT [Part 28]](http://i.ytimg.com/vi/qTLslmDAxRo/mqdefault.jpg)
![MECHANICAL PROBLEMS COMPILATION - HOW TO STOP CATALYTIC CONVERTER THEFT [Part 28]](/img/tr.png)
![Customer States & Mechanical Fails [Part 35]](http://i.ytimg.com/vi/igQE5YnFV7g/mqdefault.jpg)
the legend actually walking out with an engine
I’ve done that with a bmw m20 short block, some headers and some other accessories. Longest 50 yards of my life.
Spoiler: his buddy pulling the empty cart pulled it most of the way. Dude just carried it across the finish line.
I love the "all you can carry" 😂
Watching that timing belt slip off and hearing the damage really hurt me as a mechanic 😂
me tooo .. ouch :S
The oil drain plug modification was actually pretty genius. Maybe a lockpin would be better in addition to it to make sure it doesn't accidentally open but still genius.
I have been using one of those for 20 years. They work great !
@@pat8988 I'll probably install one once my car stops having the free service and oil changes it gets after buying it new. Life will be much simpler. Thank you for confirming how good of an idea it is.
Some of them have a safety wire hole. Thinking on it, I need to get one for my bus.
I have one on my truck, its a lifesaver, the brand is Fumoto and they come with a little plastic clip to hold the latch and its also in a channel that you have to pull it out of so theres no real way for it to open accidentally
These valves are spring loaded. They won't accidentally open. The new Fumoto valves have a removable clip over the lever. These valves are made in Japan and are standard equipment on most new cars in Japan.
5:22 frame has the structural integrity of a piece of toast.
That car is made of puff pastry lol
Yummy, Baklava.
more like a croissant XD
speed holes ^^
now I know the meaning of spring break. If the spring breaks, you have to drink enough to endure the pain 😄🍻
I grew up in the NE USA, and I remember cars rotting out from the salt on the roads, but it seems newer cars are not equipped for winter weather at all.
Facts I been seeing new ish car completely rooted out bodies frames and everything else
I grew up in the NE too and we were lucky to get 60-70,000 miles out of a car before it was rotted out. I have a 16 year old Mazda 3 now with no rust at all, I think it's mostly because so much of it is plastic. Cars last much longer now, you can easily get 150,000 miles out of car these days with a little care. I have seen newer pickup trucks rusting out, but I never see rust bucket cars on the roads like we used to.
Love the dude that doesn't want it to "get over 10" when his dog is fueling his car. He's just being funny, but some people really do that.
I once saw a guy put $2 of gas in their car and then walk into the station and buy a $5 lotto ticket. He told the cashier, "when only you got 2 ones and a five, you gotta make priorities."
If the lotto makes your list of priorities, you're too dumb to drive, but guaranteed to have your car shown in one of these videos.
that video at 5:05 was one of the harder things i have had to watch and hear in a while
"And that's how taking my car in for a timing belt, turned from a $1300 job, into a $27,000 loss for the shop.
Man, that VR6 was all kinds of hoopajooped. At least the engine mounts were totally gone.
It’s called VR-sick
Replace that mounts and that's ok
The mounts are toast but I’m pretty sure one of the wrist pins is gone as well
Wasn't that some sick chain slap?
@@MarkMyWordsXx sounded like that, as well.
4:06 Hey, cut him some slack! He hasn't completed his mechanic's apprenticeship yet! 😆
"If you can't find em, grind em" - motto of the driver at 9:00
Synchromesh driver in a Road Ranger. Takes a special skill to do that to an Eaton Transmission!!
@@Pissedoffdetective some super ignorant who isn't able to shift properly ... supposedly a "professional" ...
Lol the dog
3:07 I always heard a Rotary engine but a rotary Power Steering, that's wild.
5:05 what happens when you have spare parts left over LOL
one vital part was left out, it was the disc on the crank to stop the belt walking off LOL
engine is either a CA18DE, RB20DE or RB25DE
6:14 so that's petrol version of regenerative braking
But if it fills up when you don't use the brake...
We might've found the solution to all our problems! 😁
Fuel stations hate this one easy trick! Go to 7:10 to see it in action.
2:45 when you have a forklift but not a slide hammer
0:50 is a Freon canister not helium.
3:08 deserves a spot on customer describes noise compilation. “My car sounds like someone sawing wood”
Solution to a leaking DEF tank: remove the DEF tank, permanently.
as a truck driver myself, I agree!
1:03
BRRRTT.. BRTT.. BR.. BR.. B-B-B-B
Gio-gio!
Golden Wind!
I just... love it... when people can take handfuls of the frame off with ease.
The peacock only knows metric scale
It's interesting how many of these problems never happened to cars without computers!!!
Ask the guy who just discovered the oil funnel in his filler!!
Not really, back in the days ppl were more aware of taking care of their cars, let's talk about the Nissan with his oil change after 60 000 MILES!!!
Sure the sensor and computer crap issues wouldn't have appeared without computers, kinda obvious xD
3:12 Thats a MK8, a beloved Mk7 would never do such crap :)
Thats the saddest part of this clip
5:28 ok kids remember metal is never soft . . . 😳 rust on the other hand is softer than you might think 🤔 😮
8:16, all engines should have a oil drain like this. Maybe have some sort of security device, or safety on it, so it can't be opened accidentally or maliciously.
Maybe make it so you need a specific tool to open it. Like, you could put some sort of socket over a hexagon shape and turn it to make it open.
Those are racing drains. They are also sold for diesel trucks. I've considered buying one.
I have one on my Subaru. It has a plastic retainer clip that prevents it from being opened accidentally. Makes oil changes a breeze. Doesn’t have any protection from someone with knowledge and malicious intentions opening it, but the chances of that being an issue are next to none, imo
Fumoto valves have a slot that the lever fits in, so they can't be opened accidentally. There's enough spring pressure that in order for vibration to open them, you'd likely have to be in an accident that destroyed your car anyway. They are awesome for the DIYer. I put them on both my car and my truck, saves a lot of time, hassle and mess when changing the oil. Mine have a little flange on them so you can pop a bit of hose on the end, so there's zero splashing. Now if they could just find a solution for changing my oil filters, which make a giant mess.
@@ReadTheShrillI bought the fumoto valves as well. Looking to get the silicone funnel with w plug in bottom for filter removal
5:23 makes me hungry somehow
"sir, your car is ready"
*Shows the customer a pile of rust*
😭
So that's what Flex Seal is made of!🤣🤣🤣
I have with several cars from the 90s onwards that the fuel guage is VOLTAGE SENSITIVE. If you KNOW THE TANK IS FULL, BUT GUAGE READS LOW, CHECK YOUR ELECTICAL SYSTEM.
yep, most of the times there is some ground issue ^^
Loved the Dog at the end.🤣👍💖
1:04 Is that dubstep i hear? 😂
0:27 OMG the brackets belong into the spring!! You squeeze the spring not the whole Mc-Pherson-Unit.
Like the Dog at the end haha
The car is made of nachos 05:18
@09:53 Franklin from GTAV took chop out for some gass.
I came here to see the dog. Worth it.
Dude, that oil plug to faucet retrofit is freakin AWESOME. I’d be tempted to do the same if my drain plug wasn’t so close to the oil filter.
Thx dude
Forbidden milkshakes AND the forbidden nachos, all in one video
No way a Nissan engine replacement is 20-30k, that's more than the car is worth.
He was basically saying you ruined the car
The end was worth it😂
That first scene i thought that guy lost a finger
same...
Very entertaining.
That very first clip is what happens to so many modern, technology laden vehicles if the 12v battery goes bad. That's why it all just shut off at the end.
That VW had a cam played through the sound system 😂
Gas-pumpin' woofies be da SHIZZLE!
1:26
Erm, a WHAT!?🇦🇺🇦🇺🇦🇺
customer states he is denying repairs
I don't understand how some cars rust so bad... Like, I've had the same 32 year old Camaro in Utah on salt roads for 17 years and that sucker is in great shape. I'm working on rebuilding it now.
You take care of your car.
If you drive your car everyday for long enough for it heat up then there is much lesser chance fir rust. I have 2011 Camaro here in Poland(a lot of salt during winter) when I was doing minimum 60km trips daily I had zero dust issues over cars lifespan but as soon as I stopped using it as daily it started to rust after year of driving it once a month. So yeah, rust is often sign of car sitting outside not being daily driven.
Having a garage makes a huge difference, having proper letngthy trips also. And washing it at least once a week during winter time as well. So there is much you can do, which others don't. Greetz from Austria from the Alps :))
Rod knock? Naw I put a playing card in the fan motor
Wow keren sharing nya sahabat 🙏
That was one awesome dog, but I betting his nails did number on the paint.
the stuck injector on the Peugeot is something not to uncommon, had to Diesink EDM out 4 injectors on a head once as a favor for a friend of the department manager
that steering wheel at the start!!! I had one of those PC joystick steering wheels, but it was a chinese scam, it did that exact movement!! 🤣
It is a common problem when your rack is cpu assisted. There are many videos like that. American vehicles too. I mean, I don't want that in my car.
@@MarioAPN I ain't ever touching a car that has an ECU or other computer garbage. It's a tin box with a spinning wheel damnit, what are these electronics doing here, they're not spinning no wheels.
@@dimitar4y well, I like to touch it a lot, just on the right places. 🙃 600HP from 2.0 TFSI with a lot of boom-boom sounds from exhaust makes me very happy.
@@dimitar4ywell I guess you won't be driving any GM cars, for example Chevy Cruze has electric power steering and drive by wire.
@@tomtom1541 ugh, drive by wire. F that noise.
4.50
NEVER SEEN A SHIFT KNOB LIKE THAT BEFORE
0:48 wow a new form of glue bet the engine loved that
When oil starts to look like a chocolate delicacy, I think you've gone too far on changing it
Wtf was in that oil????😂😂😂
I needed a carhax video this morning haha
Hope you enjoyed it!
That poor dog at the end looks terrified of its owner 😢
Looks like he has a shock-collar on so he probably is.
7:13 That's pretty serious because you're losing oil pressure every few seconds.
That frame was looking as good as an apple turnover
At 8:20,that is a Fumoto drain valve. Been using them over 40 years! Never a failure.
1:30 LOOK, IT'S DAVE!
1:34 I bought a car with automatic transmission, the oil in it should be changed every 60k km, it had 120k km and the oil has never been changed. Mechanic told me it looked something like in this video, chunks of oil stuck on the gears. Luckily he managed to clean it and it has worked pretty well another 50k, maybe it still works today, dont know, sold the car last year.
Great vlog! Good history, always enjoyed!
Can you do another one of your project videos with the green car you have
Ahhh the forbidden peanut butter
Like no.600 🎉🎉
3:14 this is a Golf MK8 !
0:52......NOS...LIKE A UNDEGROUND
5:10, they just destroyed that engine!
hi
When did they start putting in vw rotory radios😂😂😂
6:14 , looks like somebody connected their vacuum lines wrong.
Souper oil
5:23
Yea…. I’m no auto-mechanic but even I know that’s *not* good..
3:05
"Node graph out of date, Rebuilding..."
how do you even connect the brake pedal to the fuel level sensor
9.11 that's why you have to do 90 day brake inspections
surprising how many vehicles i see with frames deserving of the name "tetanus express"
2:49 He forgot the Earth strap.
The gauge on the dash go spin spin spin...
♾️ fuel
1:21 umm sir why is my oil pan leaking
How did the driver with the melted bearing not notice an issue during his pre trip?
I shut my truck down because of a spot of oil I saw on the wheel, and the shop I took it to said I saved the wheel and bearing because of that.
I borrowed a friend's truck to finish my day. Thankfully, it was parked at the same shop 🙂
Same question with the trailer brakes. I hope the driver caught that on his pre trip. Truthfully, upon seeing that the one slack adjuster wasn't even connected to the brake chamber, I would have ended my inspection right there, and never looked at the rest of the brakes as there's already a problem, and the trailer needs repairs before going out. I would have told the mechanic "You ain't gonna believe this" and left the trailer with him. I suspect that the driver probably did just that.
I get sick from watching this. my heart is bleeding.
I PEE MY PANTS!
You should try it
See i told you!
:Translate to Dry-
Let me guess that oil sludge in the beginning is a result of vegetable oil mixed in.
Stupidity of these car owners is one thing. The other is that new cars often suffer from malfunctions impossible in the old ones. In the old ones things were either built more robust, or some failing systems simply didn't exist.
I've got to try the helium bottle thing someday. With my 1977 Chevy. That has a 454. ... Did somebody, somehow, _connect a fuel line to their brakes?_ I managed to change the steering pump to brake line on said Chevy without doing _that_ at least. I think. ... Is it just me or is that dog at the end wearing a _lot_ of lipstick? That's somebody's pampered pooch there.
The guy about the Nissan is not wrong. My first car was a 2008 Nissan Rogue. Noob mistake forgetting that part of responsibilities. First the piston knocked for 2 days like at (6:35) Then I hit the highway and she hit that piston through the block. Oil EVERYWHERE. $1500 and she ran kinda better than when I got her. My engine was 160,000 before it blew. The new one from eBay only had 20,000 miles
3:10 u connect the WOOFER with AUX what u want?
The dog at the end has allergies and is paw licking. Could also be demodex mange
Same injector on my 207 is stuck.
Well well well isn't that so called - the "reliable" Alfa Romeo?
1:42 whats a Neesan I know what a Nisan is but never heard of a Neesan 😂
Dog claws on the car?? I don't think so
The Tesla is about to blow up
or what