High-Efficiency 1500W Inverter sine | JLCPCB
HTML-код
- Опубликовано: 26 май 2024
- ✅ JLCPCB's 6-20 Layers PCBs: Free Upgrade to ENIG 2u
✅ Free Via-in-Pad on 6-20 Layer PCBs with POFV
1-8 layer PCBs from $2
Get $60 coupons here: jlcpcb.com/?from=Awesome
👉Download file gerber : bit.ly/3TF1CSd
👉 BUY PCB : linhkienkichdien.com/
👉 RD6018W : bit.ly/3oMozQe
👉 ADS5012H : www.banggood.com/custlink/GGD...
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com/paypalme/phdhung
Facebook group : bit.ly/CreativeElectronic
Cooperate with me: Cooperate.hitech@gmail.com
My Facebook: / inverter.support
#Inverter #JLCPCB
#Inverter 
Наука
1tr6 full hộp, 1tr4 bo mạch, 300k mạch trắng tự hàn (gồm 1 bo lớn + 2 bo nhỏ) ❤
circuit files plz
Hi.nice project.i like all your projects because that so useful and so good🎉
well this is unexpected, i also trying to build my own high frequency inverter, well most component are the same.
what frequency did you use for stage 1 with that winding configuration? is it standart 35khz or reaching more, like 60khz, and for the lpf inductor, is the value also the standart 2-3mH? and what enameled wire diameter did you use?
Hi bro. Very nice.
Can I use eer43 for such load I have salvaged it from old UPS from APC
can you make Dc-Dc 12v to 380v that is not 24v?
Give the file to gerber, there is no file on the link.
❤❤❤
How to get in touch with you? I am very interested in manufacturing inverters
3 phase?
project documents link failed.
Friend, I would like to be able to see a project sufficient for the average load of a home, 3,000 watts for example would be enough. With the following features: that works with 48 volts DC at its input to achieve better autonomy in battery performance, that is pure sine wave, that also has a built-in MPPT solar charger sufficient for its capacity. And above all without transformers so that its efficiency is as high as possible.
Có bán mạch egs002 ko ah
😊amigo me passa o esquema daquela inversora de solda que vc fez aqui no canal
Where get transformer?
Please make single face sinewave egs002 driver boord for industrial igbt module
Sir please details in GDT transformer core size primary and secondary wire gauge and turns,
output ac filter inductor wire gauge for handle 1500 watt
EE16
Primary 50 truns
Secondary 50 truns
Quả nguồn gì xịn thế a ơi
zxd2400 em ơi. 3KW đủ luôn. liguima.com/zxd2400/3/
Please next video sir 🙏
Confidant project. I need a 6000 water
Plz share simple h bridge circuit
Hi I'm seen 5eyers ago video this boord lowe power
Big trx to make 1500watt
Sir please share pic number of the file ant pcb file
Give me 5 inverter.... How many price... Let me know 😊
Kindly share gerber files.
I don't understand. Why is Batt- connected to the transformer Center tap, the Batt+ to all Drain and mosfets Source to the transformer alternate windings?
***Edit
Realized its still going to function the same. But i am used to a conventional design of Batt- to all Mosfet Sources, Batt+ to Transformer Center tap and alternate transformer windings to Mosfets either Drains.
Its push pull topology
@@k3ggaming926 Yeah, I know it is. Just that I was used to a different setup which is different from the video.
The biggest benefit here is that you don't need to insulate the MOSFETs from each other. You only need to use a single aluminum heatsink.
However, if we set up the MOSFETs this way, we cannot drive the MOSFETs in the usual manner. Therefore, we need to add a small transformer (GDT).
@@PhdHung Thank you very much. I learnt a lot i know from your videos. Can you point to a video of calculating GDT pls. Thanks again.
HELLO SIR ,PCB GERBER PLEASE
Hi friend I'm your intelligentet fan ken you make
Fish shoker in pcb in ezee steps semple
trx winding
Tr 718
1500 watt
Plez please please
Please file share
Transforming 12 volts into 127 volts...uses a lot of Ampere
trader
It's time to get out of this shop