EGS002 Indestructible Version V4.0 | JLCPCB
HTML-код
- Опубликовано: 10 янв 2024
- 1-8 layer PCBs from $2
Get $60 coupons here: jlcpcb.com/?from=Awesome
👉Download file gerber : bit.ly/3TF1CSd
👉 BUY PCB : linhkienkichdien.com/
👉 RD6018W : bit.ly/3oMozQe
👉 ADS5012H : www.banggood.com/custlink/GGD...
Here is a very durable version of EGS002; it is highly resistant to damage when used correctly. If you want the project files, please contact me.
If you like my video, give me a cup coffee. Thank you very much.
Donate : www.paypal.com/paypalme/phdhung
Facebook group : bit.ly/CreativeElectronic
Cooperate with me: Cooperate.hitech@gmail.com
My Facebook: / inverter.support
#Inverter #JLCPCB
#Inverter - Наука
Perfect small pcb ,🎉.well done for this design👍
This is so amazing, small and simple
Really you are creativity
This is the first time I see you and it won't be the last
Because you really deserve all the appreciation and respect
And this is my first comment in this video
I am your friend
Hani
from Egypt from Cairo
Mạch điện bạn thiết kế rất đẹp và hoạt động tốt
Awesome Video... 👍👍👍👍
Nice
GOOD JOB
Thanks
Super🙂very nice
Thanks
Amazing bro ❤
is the Gerber file open for download just asking?
Ngon đó a
Hi dear,
Thanks for sharing such an AWESOME project as usual.
I tried to download the gerber file using the provided link but it gets me to JLC PCB page.
Can you please share the proper link to download the gerber file.
Awaiting your earliest response.
Thanks & kind regards
Most of the problems with EGS002 boards arise because of the way the design tries to stop the inverter under shutdown conditions. Apparently the best way to address this while retaining the EGS002 board is to intercept the shutdown signal to the FET driver chips. To quote from OZTULES "Providing you ground the pin 13's of the 2110, you will have no problems. I did that by cutting the 393 off, shorting pin 1 to 4.. there are probably more elegant ways to do it, but that works...."
Explain it better, I cut and pluck only the 2 legs 1 and 4 of the Lm 393 leaving the LM 393 on the board with the other pins on, plus pin 4 4 torn off will turn off the 393 losing the functions of the same, apply me better. Thank you
That's also a good idea.
Can you show some schematic of what idea you are implementing please regarding the 393 and the advantage & dis advantage if any..@@aurismarsolar
i was told to remove R7 and C21, and short,jump, the C21 pads on the board, because some EGS002 have burned before, do you think that by doing that it will be better now?
you have just cut-off legs 1 and 4 of the LM393, nothing else? @@aurismarsolar
Yes, that's it; what i do, i REMOVE R7 AND i SOLDER OVER C21 ( bridge both sides of C21, this way eliminatinc C21 , bridging both pads; you may remove C21 or leave it there, same thing, this way PINS 3 and 6 of the LM323 are GROUNDED, it NO LONGER works, no more IFB, no more protection for the extreme HIGH current, but that's the price to pay, that«s what i want, i use FUSES on the outside power wires and i had no more disasters of blowing IGBTs , EGS002, even 1n4148 diodes!!!
Can you create a board that can be combined with other units so they can be run in parallel? Can you create some kind of communication between them for global error detection, current sharing, activating or deactivating units based on current demand, etc?
Nice design 👌. Could you please send file gerber. Thanks
👍👍
A question, can this driver be used in the 4kv and 6kv inverter?
❤❤❤❤❤
WHICH TYPE OF EG8010 IC YOU SHOULD USE IN YOUR PROJECTS FROM THESE FOURE TYPES ( A,B,C,D).
By the way, where can I purchase the already assembled circuit?
Hi bro, I would really appreciate you if you share Gerber files or a guide to build it. This is so amazing!
Where is the Gerber file please
How can I get that assembled version? Or how can I get the diagram to send it to be made and the list of components it uses?
Where can I get gerber files for the tlp250 version?
Where is the Gerber file?
I have made one of these inverters too. With 6000va ups transformer, big heavy, and a bunch of toroid inductors in parallel. The thing does work better than expected, still less efficient than I would like.
It would improve with toroidal transformer, oversized windings, and oversized toroidal choke.
THis would probably mean 15 watts on idle and 94 percent efficiency over all loads.
But I
Ithink igbts are more efficient, at 25khz, it might make 99 percent efficient if you have all oversized copper windings.
I dont know if it works with drop in igbt, but some say its about the same, it works.
I also think these would be 99 percent efficient with the smd sic gan or trenchfets, that have very low rds on and low gate drive power needs.
They could be soldered to the pads of the board without a heatsink, they are supposed to run very very cool.
Bridge the d and s pins with the smd mosfet , and connect the gate with a small wire.
That would work,
Im just cheap, and am ok with the inverter I have,
However, with solar, everything must work at 99-95 percent efficiency, the mppt, real name brand, the inverter, maybe gan inverter, and the wires, all oversized.
Efficiency stacking is bad. so over 95 is good.
That means less solar panel and battery, which is cheap.
This is good.
YOu might need just 8 mosfet inverter board if the gan or igbt or sic mosfets work at high current. It would mean less gate drive needs. But running the swithing devices in parallel gets a lower rds on in theory. I dont know how much goes to conduction losses proportional to gate drive losses.
I think i might try igbt with a very small inverter project and maybe even redo the hy4008 mosfets which I use now, with 8 or 16 of the smd mosfets, the ones with the very lowest gate and rdson numbers.
I think my inverter with the laminated transformer would still run relatively hot, because the transformer is the limiting factor I think ,
Also increase bus bar size on board.
If someone sells finished modified boards with link to affordable toriods, it would make for a very good off grid solar home system . They are reliable and well made I think.
My circuit only has a maximum efficiency of 92%. It's not extremely high, but considering the cost, trying to increase the circuit's efficiency would be more expensive than purchasing additional lithium batteries and solar panels.
Question; how big do the inductors need to be before the transformer? I am thinking of just making a 5 or 6 turn inductor with 1 big 2 gauge wire and a small toriodal core, just big enough to fit the wire turns. DO you think this would be better than having more core material and turns? I see you have a split core transformer with just 1 or 2 turns? Im looking to get lowest watt consumption, and lowest heat, with very high current up to 10kw.@@PhdHung
@@PhdHung sqjq160e is best because of heatsink pinout. can be placed on to247 with ds pads and gate wire jumper. IT would be 98 percent efficient
Hi there. The board looks and works great, but the gerber files are not available from the link. Also, your website redirects to a store. I hope you can correct this. Thanks in advance!
Contact me via email or FB.
Hi dear brother need file
@@PhdHung awesome project, please which email should we contact, i also need the schematics and Gerber files
Hi, i used EGS002 along with conventional UPS Transformer to have pure sine inverter, but with loads heavier than 150w, the voltage drops from 200v to 180v. Any idea where to look at ? thanks. Feedback seems correct (always 3v at VFB pin).
It's the transformer, I had a similar issue so I had to source for a 12V 1KVA inverter transformer.
Problem solved.
UPS transformer is really underrated for pure sine wave inverter.
If you dismantle it, you will see that the coil AWG is too small for the rated power.
Thank you very much for your answer. Does it work fine for you at 12v ? it is rather supposed to be 8,5V to have 220V output.@@i-TEQ_power
Please Next video pic16f716 spwm module
Love from Russia
спасибо
Card 4.0 này mình chỉnh ở 60hz được không
Change position main connector max to left side for compatible with Tataliken invertors. Thanks
Hi, can you make a tutorial for short circuit protection for inverter?
❤
можно у вас приобрести файлы на изделие?
I ordered a project
Amigo da pra vc me passar o diagrama da inversora de solda que vc fez a 2 anos .
Bom dia como fazer para baixar o arquivo dessa plaquinha top?
First comment
Anh có thể cho em xin file này hoặc bán cho em ít pcb nhé
Có bán bo full ko bạn? trang buy pcb trên lỗi rồi
bạn cần mạch nào thế?
sir make a video apfc ups igbt driver checking
Which one is better between the two?
tlp250
Hi
Can I use this card on a version 1 circuit?
yes
In this video i see a board with small & plastic packege mosfet you use.
What is this mosfet no.? Please tell me please.
i use MMF60R290p 13A-650V
@@PhdHung Another Question please.....
What is the minimum dead time for h bridge?
i use 1uS@@bdtp
@@PhdHung Is it possible to drive a full bridge without mosfet driver ic?
I means with transistor?
I send mail to you dear for file....but no response for 3 days...please send file dear
Xin cảm ơn bạn ,Bạn cho mình xin số điện thoại để mình muốn sửa biến tần ,xin cảm ơn Bạn.
0989821611 nhé bro
Có thương mại không bác
Làm chơi vậy thôi b.
@@PhdHung làm em một bo đi bác
How to convert ups wave (square wave ) to pure sine wave
Write me i known
Why your low side never had soft switching
yes
Làm cách nào để đặt nó thành 60HZ?
You need to edit the PCB. In this design, I have set the frequency to 50Hz.
bro tlp250 bulunmuyor orijinal ...
ok bro
Made buck-boost converter with CC & CV mode 10A ...
It is being completed; please wait.
@@PhdHung i hope released soon i need it ...
Hello the Gerber file is not working.
file ok bro.
Hi you can send me the file gerber?
HELLO
This guy makes videos..but doesn't reveal his knowledge to others....in this video he showed egs002 safety from short circuit... but he doesn't allow any details to be others to learn n understand.... sympathy....
Gerber file please
Contact me via email or FB.
@@PhdHung what is your email?
Cho thanh toán qua thẻ nội địa thì tốt
Làm cái visa ảo là ok. Mình đang dùng của cake by VPbank. Đăng ký online
@@PhdHung shopee có 1 shop nhận đặt hàng pcb
P❤
Friend makes a . Product link on Aliexpress. Thank
I only have a shop on Shopee.
Link?
@@PhdHung link?
Facebook group : bit.ly/CreativeElectronic
Cooperate with me: Cooperate.hitech@gmail.com
My Facebook: facebook.com/Inverter.support
O amigo poderia colocar o seu produto a venda no aliexpress para que possamos adquirir comprando e aí já ajudaria muito o canal.
Hi.
Which inverter is best.
The one which converts dc to ac and then amplify using output transformer or
Which amplify input and then convert to AC.
Kindly reply.
Hi some guy send me file a depositfile?
Good job any only can tell me mosfet number
EGS002 Version V4.0 upload Gerber file please
Contact me
Hi send file? I need this file you can help me?
Amazing items , ( ruclips.net/video/YlRqpjZU6rA/видео.html ) i came across this project i notice it has been a along time. the mppt module and the protection control has not been release by you. It seems you abandon the project or something happens to the idea. we would like you complete the project . I believed it will be more amazing then ever before . i will need the module and complete files too. keep it up.
What is the contact email?
Hello, please check your gamil, thanks
Where is the Gerber file?
contact me via email or FB
How much is your email?
How much is your email?