Audi Q5 And Tiguan Panoramic Sun Shade Sunroof Fix DIY No Headliner Removal Needed
HTML-код
- Опубликовано: 24 мар 2023
- This Video should help you to fix your broken Sunshade on your Tiguan or Audi Q5 they pretty much the same. I did probably more than 10 of them they not easy to do but the way I do it should save you some good money and time. Most people show only how they take it apart and than it stops or do not shop the finish product actual working or removing the whole headliner well think about why :)
Just watch the video ask questions before hand please subscribe and I will get back to answer as much I can. Good Luck !!!
I just finished replacing my sunshade in my 2012 Tiguan. Thanks for the amazing tutorial. If you’re doing it by yourself you can pass a flexible wire through the eye of the metal clip and tire it to one of the rear sunroof glass screw holes. This way the metal coil will not retract when you try to pass the metal coil through the rail on the other side.
And nice to see people saving money and fixing the shade them self 👍💪
where did you guys purchase the shade ?
This video saved me $2800🎉 THANK YOU! Completed the job only bc of this video😊
You were right, this wasn't "easy" but it wasn't impossible either. Mine was a '16 tiguan and the most difficult part is putting the spring slider into the groove and then inserting the silver metal tab. Definitely need a helper and the metal hook things you talked about. Great video, helped me save $2000 which was the quote from VW dealer.
Absolutely this is the most difficult part even if you do 10 of them it's never easy. I am glad this helped you to save money please consider to subscribe it help me a lot. Thanks
G man, thank you so much for this video tutorial. I successfully completed the repair on my Q5. It took two tries but I got it down. Saved me a lot of money. Using picks is the key to this job.
Maybe consider subscribing to my channel if not done already It doesn't cost anything and helps a lot. Congrats to the successful job 💪
hello , where did you purchase the shade ? 😊
Great instructional video! Subscribed.
Great job. Very detailed.
Most decent guide so far. I also have a broken clip for my sunshade. Frustrating that I need to undergo such process just to replace a clip. Another problem is that these clips are not in the marketplace yet.
G Man, Thank you for posting a complete video on this sunscreen. I have only found short incomplete bits until now. I do have the instructions from Audi and your post helps make it all come together for me.
Thank you I am happy to see that this might help some people if you have any questions just ask I did plenty of them they never super easy when it comes to putting the little metal squares in to the stainless steel spring openings and than fiddle it back into the track. Also some newer models do not have the little metal squares and your aftermarket replacement will come in traditional style with them. No worries about that the traditional style will also fit the newer without those little metal pieces. Good Luck
@@G-MansWorld Thank you for the detalied video and tips. Great job! I have a question for you. I have a newer model that does not have the little metal squares. How do you put the original plastics onto the steel spring? It looks like the aftermarket steel spring has one hole on each side for the metal square but the original steel spring has two holes on each side that go directly into the plastic.
@@radionel Hi just use the aftermarket plastic parts that comes with your steel spring screen. The little metal squares are usually already pushed in the plastic end pieces that come with the aftermarket screens. Remove them in order to install them it's the difficult part where you have to get those metal squares in to the spring just before u try to reinsert them into the track. I hope this makes sense. I also have this case many times the newer models do not have the metal squares anymore just use the items that come with the aftermarket kit.
@perc82 , could you post a copy of the Audi instructions? I'm in the middle of replacing mine and I'm trying to figure out how to put the shade on the guides and the whole motor part.
How much you charge for this work?
Many thanks for the video, I save a lot of money😏 Tomorrow I try to do the same....
Hi, I do the work yesterday and all is good 👍 Many thanks for video.
Very well done man. I was waiting for this video for over two years. Keep up the good work and let's fix awesome Audi's with 100s of faults here and there.
Some good angles with these cameras will definitely help more. It was your first time, no big deal. We all make mistakes with everything new.
This mechanism of sunscreen in Audis or any other car is purely being built to rip customers, why? Because of the way glue has been used on only one end of metal strip with fabric and the way it slides. Never buying any car with sunroof in future, even a tiny one. Those solid roofs are blessing.
Good job sir
Will this work the 2010 S Line Model?
Question - after the replacement on my 2015 Q5, there are wrinkles at the end (above the back seat) and the headliner is sagging. Would you know how to fix this? Thanks.
In Dubai this is costing me $800 for the part & $250 for the labour. Thought it was worth it, especially with the heat, and it'll show the future owner I didn't skimp on it.
Pretty cheap on labor...... The parts you can get on eBay for like 70 bux or so
@G-MansWorld the part is from Audi main dealer (I.e., Al Nabooda in Dubai). We don't have eBay here. The labour rates are cheap here compared to UK where I'm from.
Super nice Video! If you could do the process also for a VW Touran VAN? Seems to me quite simular, but obviously there are differences. Also i don't have a garage with all the tools you used. By origin you must be garman by your accent?
Sorry so far did not do one of those
Good afternoon. Thank you for the lesson. I do everything myself, but this requires a competent approach to business. Did you have to adjust it after installing the rear window?
@@paveltarasenko5486 adjusting ? There is nothing to adjust the only thing you need to adjust is the height of the rear panoramic glass itself but this will not affect the operation of the shade itself. Hope this helps. Consider subscribing it's free and it helps me a lot.
Hi, great job... can you advise me where to buy the new sun shade on internet? TNX ... I'm in Italy!! 😀
Ciao you should find them on eBay and Amazon please consider subscribing I am still trying to make it to the first 1000 thank you.
Great video. How does the little metal thing slotted intot he metal strip and secured into the blue thing and clip? Those crucial steps unfortunately is not focused by the camera. Can someone help by providing video or pictures? Thank you!
Let me try to explain with words a little more..... So you take the little metal piece that comes with the new shade and put it diagonal into the opening from the screen spring end. You only can get it in diagonal than push it straight and hold it with a pic tool and try to get it into the sliding groove move it forward so you be able to push the plastic part that inserts into the Aluminum tail from the top down so it grabs the metal part that you inserted into the screen spring. In needs to be aligned with the blue part u see on most models. After that you take the plastic cover with gasket from to down click it in place and replace the screw this also prevents it from popping out best is to have 2 people doing each side at the same time but you can also do this alone.
@@G-MansWorld can you respond or email me how to contact your shop to get the sunshade on my 2014 Audi Q5 replaced?
Still doing these in Austin?
I found a few replacements on Amazon, assume I need one of the $100 ones that comes with the full assembly, but reviews are all over the place. Is there a particular one you've sourced that you like?
They all the same sort of and you only need the screen the plastic housing does not break. We still doing them but pretty busy those days North Austin Zoom Auto Service talk to Sebastian and tell him you did see the RUclips video with G Man. It's not easy to do but if you have patience and follow the video you should be ok. The bad reviews on Amazon are probably from people you did not manage to get it done.
When it's back than keep holding the switch and it will move some more you should be able the reach the screws than
Do you know how to get the sunroof back far enough on a 2018 q5? I can open it a little bit more but not back to the bar. Cannot see screws.
this is for 2009-2017 mate
G Man have you ever think about selling this sunshade roller blind，I'm a manufacturer from China. There is installation video for your reference，subscribed😊
I did have an eBay shop in the past but walked away from it thanks for subscribing
I’m near Austin. Can you please tell me how I can contact your shop to get the sunshade replaced on a 2014 Audi Q5? Thank you!!
Hi shop is called Zoom Auto Service it's not my shop I just wrench cars for them. It's pretty busy and I am going for a break soon. If you have a little time than it's probably best to call them in a couple of weeks. You will need to leave the car probably over night it takes at least 4 hours to do the job sometimes a little longer. I think they charge 1000 dollars labor and the part you can easy buy on Amazon or they buy it for you but than need the exact color I think it's only 3 colors anyway Gray - Black - Beige
You do not need to buy the whole assembly just the screen something like this but in your color Amazon link
a.co/d/dOCGeHH
Hi, I have 2012 Audi Q5, Pano doesn’t open or close, Don’t know what to do, Can it be a motor problem as the glass looks perfectly fine, and How much it will cost to get it fixed? Rough Estimate, Thanks!
Sorry can be many things not possible to make a general assumption
What year was this Q5? My 2015 SQ5 just recently had the adhesive, holding the sunscreen to the “track, melt from the damn heat outside, so the sunshade is just sagging. You mentioned the newer ones have the bracket that’s in the way when removing the sunshade box. I’m assuming this is bracket is going to be in the way on a 2015…
I think this was a 2015 as well it's just a little harder to get that shade assembly out but still no headliner needs to be removed. On the other hand it helps to hold it in place when u reassemble it.
My shade is sagging as well and gets caught when I open/close it. Did you find a solution?
Hi, i tried doing it, i added the new headliner in and installed it but when i was testing it to close it ripped up and the metal film came out of the rail, i had to cut it with pliers to remove it from the rail. Now the rail thing that pull up the headliner is stuck on the front glass, it just moves 10 cm from front and back but it wong go all the way back so i can try again with a new headliner. What should i do ?
I have also cuted the clips from the rail
That does not sound good try to remove all leftovers from the screen like metal band from the rail carefully. But if you use to much force you might have damaged the guides that move in the track. We always test carefully if you feel resistance than there is no point of trying to push the button longer to move the sunshade. Good luck to you in fixing your Sunshade
Are you supplying a new Audi Retractable shade. It has a list of 665 Sounds like a great deal. My guys don’t want to touch em.
No point to replace the whole assembly u can buy the fabric for 75 dollars aftermarket on eBay or Amazon the difficult part is to put it in without removing the whole headliner. Any decent mechanic should be able to do the job with the help of this video.
Where are you? Need your help!!
Are you located in Souhthern California?
Sorry no in TX
Hi mate , are you in the UK?
No I am in the US
❤
What parts did you need to buy?
You just buy the screen replacement kit on Amazon or eBay....... Help out by subscribe still try to make it to the first 1000 🤟
Hey man where in TX are you? I had the same happen to mine and if you’re somewhat close I’d like to get a quote
Austin
@@G-MansWorld aw man that’s 10 hours from me. Thanks for the video! Watching it now, I’ll try to do myself
@@vinceb90 good luck take your time and have patience a second person is helpful when you put the replacement into the track
@@G-MansWorld thank you sir I appreciate it. Right now the shade is all the way forward and hanging down on one side (passenger), how would you suggest I retract it so I can get to everything to do the job?
@@vinceb90 you should be able to just run it all the way back if it is hanging down to much and won't roll up try to careful cutting the fabric out and that run it in the all way back position
950 is a bargain folks, The part list for 665 from Audi, In Houston, We would charge 1300.
Really hoped this would be easier for someone who usually doesn't work on his car 😂
You're accent sounds a bit German, and your friend's sounds Italian. What kind of accent is that?
Yes German and my Friend accent is Polish
@@G-MansWorld Ich hatte schon gehofft jemanden gefunden zu haben, der mein Sonnenrolle über die Heckklappe reparieren kann, aber Texas ist doch arg weit. Mein Werkstatt weigert sich und will es nur mit komplett demontierten Panoramadach machen.
@@LimaUniformCharlieA nur mal aus Interesse was soll das in Deutschland Kosten ?
@@G-MansWorld bei der freien Werkstatt ca. 1600€, je nach tatsächlichem Aufwand. Bei Audi/VW sicher noch ein 1000er mehr.
@@LimaUniformCharlieA recht teuer fuer Deutsche Stundenloehne finde ich ...... Wir machen das hier fuer 995 dollar und ein guter Mechanic macht hier mehr die Stunde als in Deutschland.
Where are you based btw? I need to get this done on my Q5. If you know anyone that can do this in the bay area, please let me know. Don't want to go to a dealer for this.
I am from Austin TX I don't know anyone in your area but a decent shop should be able to offer this to you especially with the video that helps how to do it. Yes a VW will tell you that the headliner needs to go out and all this BS. If you are ok with a couple of wrinkles in the rear corner of the headliner that will disappear after a couple of weeks then you can save tons of money. The shop I work at charges around 1000 dollars if I remember right.
@@G-MansWorld Thank you.
Excellent video showing how to do the procedure. But you don’t set tools on customer’s car paint or step on their seats with dirty shop shoes like that..
The guy who stands on the seat is the owner 🤣
G Man - I am in DFW. I can run car down to Austin if you'd like to send me a quote. Thanks
We charge 950 for this if you plan to do so then please plan 24 hours turnover. The best approach would be to send VIN and color of your trim before coming down. Of course not here in chat I would give you my email or something.
@@user-vp8je6gu6e send me an email with your contact information
Info@transatlantic-trade.com
Where are you?
Austin TX
That ribbon spring is a POS. The silver metal clips have ripped through the spring twice now, ruining 2 shades. I’m about fill in the whole sun shade area by gluing in some other fabric. It’s a horrible design. There should be a center bar that prevents the springs from trying to roll sideways, and some other way to attach the ribbon to the guide clips.
Agree terrible design and not easy to do especially alone
No se mira bien el video no se mira aveses la parte donde trabajas
WARNING: DO NOT DO IT THIS WAY!!!!!!!
The metal slip that has to slide into the track actually REQUIRES you to take off the entire roof liner from the front of the car to the rear, AS WELL AS removing the entire panoramic roof assembly. Otherwise you CAN NOT slide the metal into the enclosed railing!!!
“Service Mode” is for Service, NOT repair. This guy will absolutely destroy the value of your Audi if you do it this way! It will slide AT FIRST, but it will not last long because it is NOT secure in the railing!!!
TAKE IT TO A QUALIFIED PROFESSIONAL OR TRADE IT IN IF YOU CAN’T AFFORD THE REPAIR!!!
(My personal advice: If you can’t afford it and you’re worried about it becoming too hot in the day, go get the roof glass tinted as dark as you can to where you can still see through it. Much cheaper and still has the same effect)
😂😂😂😂